Commit Graph

371 Commits

Author SHA1 Message Date
Joerg Wunsch
0e17a5bcdb Log when the user is turning debugging on/off.
Also sanitize the TRACE* macros a bit so they syntactically behave like
single C statements (even inside in `if' statement).

Submitted by:	des
2001-07-09 21:11:10 +00:00
Joerg Wunsch
5d54fe9172 Hmpf, remove two variables that got unused by rev 1.214. 2001-07-09 21:00:02 +00:00
Joerg Wunsch
83edbfa5ff Ouch, calculate correctly. With 300 rpm and 25 retries, it's 5 seconds
till timeout.
2001-07-09 20:53:19 +00:00
Joerg Wunsch
e3b525a006 Remove parts of rev 1.211 again: do not delete our children iff they
haven't been probed successfully.  It's a known bug that ISA hints
processing instantiates those devices, and prematurely killing them
has other unwanted side-effects.
2001-07-09 20:50:41 +00:00
Joerg Wunsch
3fef646ef0 As des' example shows us, DMA overruns could happen in a situation
where they will never succeed.  Add a stop-gap measure that will at
least eventually timeout the operation instead of retrying it
indefinately.

MFC after:	1 month
2001-07-09 20:46:45 +00:00
Joerg Wunsch
fb35bd37f2 Another large patchset from Bruce.
Despite of a few cosmetic things like adding ``irritating silly
parentheses'' around all return values, this mainly improves FDC reset
handling by no longer gratuitously resetting the FDC all the time
(which causes it to lose the notion of the current track) but only in
case of errors, and it sanitizes the block and offset calculations in
fdstrategy() and fdstate().  Some additional cleanup added by me, in
particular the large switch in fdstate() now always uses return to
break out, and no branch falls off the end of the switch statement
anymore.  Per Bruce's suggestion, removed M_NOWAIT from the malloc()s
to simplify things.

Submitted by:	bde (mostly)
2001-07-08 20:50:20 +00:00
Joerg Wunsch
6044485346 More cleanup when detaching. Clone device entries will now be
destroyed properly (otherwise bad things would happen after a clone
dev had been created, and the module was kldunloaded).  Allocated
children that have not successfully probed are being deleted again
(otherwise fd0 and fd1 have always been allocated, even if only
fd0 was acutally present, and fd1 even survived kldunloading the
module).

Still, kldunloading leaves remnants of the previously existing devices
intact.  Why doesn't it destroy all the devices?  As a consequence,
since dev->descr now points into no longer allocated memory, the
system panics deep inside printf(9) when running devinfo(1) after
kldunloading the module.  Ideas sought...

Also, when kldloading the module on a hints-populated isab0, this bus
somehow has already created an fdc0 entry (a dummy) so the load
attempt fails and will register fdc1 instead.  What are those dummy
entries for?  Loading the module from the bootloader works, and it
can be unloaded an re-loaded then later.
2001-07-04 22:10:33 +00:00
Joerg Wunsch
f664aeee49 Use the new-born BIO_CMD1 instead of fudging a bio_flag value for reading
the sector ID.

Based on numerous comments made by Bruce, rewrite a good part of the
old fdformat() function, and merge it with fdreadid() into a single
unified fdmisccmd() function.  Various style and a couple of more
serious bugs fixed there.

While i was at it, i also fixed the long-standing "TODO: don't
allocate buffer on stack." in fdcioctl(), fixed a number of style bugs
there, and finally implemented the FD_DEBUG ioctl command that has
been advertised in <sys/fdcio.h> (formerly <machine/ioctl_fd.h>) for
almost seven years now. ;-)

Submitted by:	bde (a lot of fixes for fdformat())
2001-06-29 15:30:48 +00:00
Joerg Wunsch
5f431174f3 This change slipped through hidden in a CVS conflict. Logically belongs
to the previous commit (fix resource deallocation).
2001-06-29 07:53:45 +00:00
Joerg Wunsch
e219897a2a First stab at fixing resource deallocation, and implementing fdc(4) as
a KLD.  Still doesn't work well except in the PCMCIA case (now if only
pccardd(8) could load and unload drivers dynamically...).  Mainly, it
tries to find fdc0 on the PCI bus for whatever obscure reasons, but i
need someone who understands driver(9) to fix this.  However, it's at least
already better than before, and i'm tired of maintaining too many private
changes in my tree, given the large patches bde submitted. :)

Idea of a KLD triggered by:	Michael Reifenberger <root@nihil.plaut.de>
2001-06-29 07:36:29 +00:00
Joerg Wunsch
64860614a4 Merge in parts of a larger patchset i received from Bruce. Untested
by now (except of a compile test), but i believe this to contain no
actual functional changes.

. Fix the copyright of the Regents i accidentally broke in rev 1.197
  (although only a very small part of the original driver survived
  at all...).

. Bump MAX_CYLINDER since some obscure formats really use more than 80
  cylinders.

. Correctly handle BIO_FORMAT which used to be a bitmask but is now a BIO
  command of its own.

. Numerous stylistic fixes.

Submitted by:	bde
2001-06-28 12:35:28 +00:00
Joerg Wunsch
250300ebb0 Implement a new ioctl command for floppies: FD_READID
Reads one sector ID field from a given track.  Useful for analyzing
floppies.
2001-06-26 22:16:30 +00:00
Joerg Wunsch
4c34deeecf Some more cosmetics: kill another couple of K&R function definitions
that survived from old days, fix style of return type in fdcpio(),
kill old Emacs hints that are no longer working that way anyway.
2001-06-26 22:07:25 +00:00
Joerg Wunsch
80909a7db8 Cosmetics:
. staticize out_fdc(), there's no longer an ft(4) driver sharing its use
. remove in_fdc(), has been used by ft(4) last time, long since obsoleted
  by fd_in()
. move the declaration of fd_clone() to where most of the other function
  declarations are
. de-__P()ify fd_clone(), it's been the only _P()ed function in the
  entire file
2001-06-20 20:21:55 +00:00
Peter Wemm
2398f0cd1d Hints overhaul:
- Replace some very poorly thought out API hacks that should have been
  fixed a long while ago.
- Provide some much more flexible search functions (resource_find_*())
- Use strings for storage instead of an outgrowth of the rather
  inconvenient temporary ioconf table from config().  We already had a
  fallback to using strings before malloc/vm was running anyway.
2001-06-12 09:40:04 +00:00
Joerg Wunsch
f8ce7dd521 Cosmetics:
. remove stale comments and a stale #define (from the old days of ft(4))
. make MAX_SEC_SIZE (used in isa_dmainit()) a #define

. fix a typo in a string
. use 0 as the blocksize in devstat_add_entry(), since the actual blocksize
  is unknown (devstat(9) suggests to use 0 in that case)
2001-06-11 10:48:10 +00:00
Joerg Wunsch
e774b25111 Nuke the various poorly maintained copies of ioctl_fd.h. The file is
not machine-dependant, thus it has been moved out (repo-copied) into
<sys/fdcio.h>.
2001-06-06 06:15:03 +00:00
Joerg Wunsch
7998b1245d Make the FDC (state machine) state an enum, as opposed to an int
abusing a bunch of #defines, for clarity and better debugging support.
2001-06-05 21:01:46 +00:00
Joerg Wunsch
b794010414 Move out the files from src/sys/isa/ic/ to src/sys/dev/ic/, so they
can be made userland-visible as <dev/ic/...>.  Also, those files are
not supposed to contain any bus-specific details at all, so placing
them under .../isa/ has been a misnomer from the beginning.

The files in src/sys/dev/ic/ have been repo-copied from their old
location (this commit is a forced null commit there to record this
message).
2001-06-04 21:04:14 +00:00
Joerg Wunsch
06740f7b41 Fix my email address. I accidentally cut'npasted the wrong (old)
hostname laste time.
2001-06-03 20:41:21 +00:00
Poul-Henning Kamp
48c35f87be Don't lie to diskerr() now that it listens to us. 2001-05-25 09:07:23 +00:00
Joerg Wunsch
2995d1100c Implement a few more floppy ioctl commands and IO options, namely:
. FD_CLRERR clears the error counter, thus re-enables kernel error
  printf()s,

. FD_GSTAT obtains the last FDC operation state, if any,

. FDOPT_NOERRLOG (temporarily) turns off kernel printf() floppy
  error logging,

. FDOPT_NOERROR makes the kernel ignore an FDC error, thus can
  enable the transfer of an erroneous sector to the user application

All options are being cleared on (last) close.

Prime consumer of the last features will be fdread(1), to be committed
shortly.

(FD_CLRERR should be wired into fdcontrol(8), but then fdcontrol(8)
needs a major rewrite anyway.)
2001-05-14 20:20:11 +00:00
Poul-Henning Kamp
a468031ce8 Actually biofinish(struct bio *, struct devstat *, int error) is more general
than the bioerror().

Most of this patch is generated by scripts.
2001-05-06 20:00:03 +00:00
Mark Murray
fb919e4d5a Undo part of the tangle of having sys/lock.h and sys/mutex.h included in
other "system" header files.

Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.

Sort sys/*.h includes where possible in affected files.

OK'ed by:	bde (with reservations)
2001-05-01 08:13:21 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Mark Murray
3c36743e2d Harvest interrupt entropy off the floppy disk controller. 2001-03-03 14:53:50 +00:00
David Malone
7cc0979fd6 Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
Poul-Henning Kamp
cb7e609a3c Make diskerr() always log with printf. 2000-11-26 19:29:15 +00:00
Peter Wemm
ada54f9e54 Untangle some resource matching loops that were getting on my nerves
and seemed to be getting cut/pasted to places they shouldn't be.
2000-10-15 08:50:45 +00:00
Poul-Henning Kamp
db90128160 Avoid the modules madness I inadvertently introduced by making the
cloning infrastructure standard in kern_conf.  Modules are now
the same with or without devfs support.

If you need to detect if devfs is present, in modules or elsewhere,
check the integer variable "devfs_present".

This happily removes an ugly hack from kern/vfs_conf.c.

This forces a rename of the eventhandler and the standard clone
helper function.

Include <sys/eventhandler.h> in <sys/conf.h>: it's a helper #include
like <sys/queue.h>

Remove all #includes of opt_devfs.h they no longer matter.
2000-09-02 19:17:34 +00:00
Poul-Henning Kamp
3f54a085a6 Remove all traces of Julians DEVFS (incl from kern/subr_diskslice.c)
Remove old DEVFS support fields from dev_t.

  Make uid, gid & mode members of dev_t and set them in make_dev().

  Use correct uid, gid & mode in make_dev in disk minilayer.

  Add support for registering alias names for a dev_t using the
  new function make_dev_alias().  These will show up as symlinks
  in DEVFS.

  Use makedev() rather than make_dev() for MFSs magic devices to prevent
  DEVFS from noticing this abuse.

  Add a field for DEVFS inode number in dev_t.

  Add new DEVFS in fs/devfs.

  Add devfs cloning to:
        disk minilayer (ie: ad(4), sd(4), cd(4) etc etc)
        md(4), tun(4), bpf(4), fd(4)

  If DEVFS add -d flag to /sbin/inits args to make it mount devfs.

  Add commented out DEVFS to GENERIC
2000-08-20 21:34:39 +00:00
Nick Hibma
02211bae3b Avoid a '"fd" is usurping ...' message.
PR:		20348
Submitted by:	Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
2000-08-09 12:45:04 +00:00
Peter Wemm
58c9d62373 Fix a warning re: a potentially unused pccard helper function 2000-07-28 23:00:00 +00:00
Poul-Henning Kamp
1fdb6e6c69 Step down a level and issue format requests with a struct bio instead
of a struct buf.
2000-05-06 07:01:47 +00:00
Poul-Henning Kamp
9626b608de Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by:    peter
2000-05-05 09:59:14 +00:00
Bruce Evans
3aae7b16d2 Fixed the type of some ivar access functions. Ivars have type uintptr_t,
not u_long.  On i386's with 64-bit longs, returning u_longs indirectly
in (more than) the space reserved for uintptr_t's tended to corrupt the
previous frame pointer in the stack frame, so it was not easy to debug.
The type mismatches are hidden by the bogus cast in DEVMETHOD().
2000-04-30 10:01:56 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Poul-Henning Kamp
56a2308964 Fix floppy driver after my isadma changes. 2000-03-25 21:20:23 +00:00
Poul-Henning Kamp
b99c307a21 Rename the existing BUF_STRATEGY() to DEV_STRATEGY()
substitute BUF_WRITE(foo) for VOP_BWRITE(foo->b_vp, foo)

substitute BUF_STRATEGY(foo) for VOP_STRATEGY(foo->b_vp, foo)

This patch is machine generated except for the ccd.c and buf.h parts.
2000-03-20 11:29:10 +00:00
Poul-Henning Kamp
21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
Joerg Wunsch
5f830ea2cd Make the Y-E Data PCMCIA floppy of the Toshiba Libretto work under
-current.  It doesn't work yet as stable as the 3.x/PAO version of the
driver does, however, i get occasional `FDC direction bit not set' and
other weird messages, but it basically works at least.

The old (defunct) #ifdef FDC_YE stuff has been eliminated completely
now, PCMCIA-FDC specific functions have been implemented differently
where needed.

Unfortunately, due to the fact that the traditional PeeCee FDC with
its funny non-contiguous register space (one register for WD1003
harddisk controllers is interleaved into the FDC register set), and
Peter's subsequent changes involving two different bus space handles
for normal FDCs, the changes required for the Y-E stuff are more
complex than i'd love them to be.  I've done my best to keep the logic
for normal FDCs intact.

Since the Y-E FDC seems to lose interrupts after a FDC reset
sometimes, i've also replaced the timeout logic in fd_turnoff() to
generate an artificial pseudo interrupt in case of a timeout while the
drive has still outstanding transfers waiting.  This avoids the total
starvation of the driver that could be observed with highly damaged
media under 3.x/PAO.  This part of the patch has been revied by bde
previously.

I've fixed a number of occasions where previous commits have been
missing the encapuslation of ISA DMA related functions inside
FDC_NODMA checks.

I've added one call to SET_BCDR() during preparation of the format
floppy operation.  Floppy formatting has been totally broken before in
3.x/PAO (garbage ID fields have been written to the medium, causing
`wrong cylinder' errors upon media reading).  This is just black
magic, i don't have the slightes idea _why_ this needs to be but just
copied over the hack that has been used by the PAO folks in the normal
read/write case anyway.

The entired device_busy() stuff seems to be pointless to me.  In any
case, i had to add device_unbusy() calls symmetrical to the
device_busy() calls, otherwise the PCMCIA floppy driver could never be
deactivated.  (As it used to be, it caused a `mark the device busier
and busier' situation.)  IMHO, all block device drivers should be
marked busy based on active buffers still waiting for the driver, so
the device_unbusy() calls should probably go to biodone().  Only one
other driver (whose name escapes me at the moment) uses device_busy()
calls at all, so i question the value of all this...

I think this entire `device busy' logic simply doesn't fit for PCMCIA
&al.  It cannot be the decision of some piece of kernel software to
declare a device `busy by now, you can't remove it', when the actual
physical power of removing it is the user pulling the card.  The
kernel simply has to cope with the removal, however busy the device
might have been by the time of the removal, period.  Perhaps a force
flag needs to be added?

Upon inserting the card a second time, i get:

WARNING: "fd" is usurping "fd"'s cdevsw[]
WARNING: "fd" is usurping "fd"'s bmaj

I suspect this is related to the XXX comment at the call to
cdevsw_add().  Does anybody know what the correct way is to cleanup
this?
2000-03-18 18:27:01 +00:00
Peter Wemm
b6e5f28e51 Futher cleanup.. "device_print_prettyname(); printf()" -> device_printf()
It seems that the IDE system uses 0x3f6 for itself, which conflicts with
fdc's default 0x3f0-3f7 allocation range. Sigh.  Work around this.
Use bus_set_resource() rather than allocating specific areas, it makes
the code a little cleaner.

Based on work by:	dfr
2000-01-08 09:33:09 +00:00
Warner Losh
3b1782065f Merge most of FDC_YE into the mainline driver.
o Rename FDC_PCMCIA to FDC_NODMA to allow systems that don't have dma
  for floppies.
o Remove all but two FDC_YE ifdefs.  They aren't needed.
o Move defines for YE_DATAPORT to fdreg.h.

Not fixed:
o The pccard probe/attach.  However, motivated individuals can more
  easily add this now.

This is a merge of changes I've had in my tree for a long time.  These
fixes were tested on my VAIO with its normal floppy.  Please let me
know if I broke anything.

Prodded by: Peter Wemm <peter@freebsd.org>
2000-01-06 07:13:54 +00:00
Peter Wemm
b9da888fcb Make the evil broken pnpbios compensation slightly less evil.
This is the hack that compensates for when bios vendors "forget" to
include the fdc control (0x3f7) port in their io port mappings.  Instead
of accessing ports outside of a range allocated to a handle, simply
allocate the port directly.  It even shows up in the probe..
2000-01-05 17:42:43 +00:00
Peter Wemm
37286586ff Patch up some of the evilness left over from the early newbus porting.
In particular:
 - Don't leave resources allocated in the probe routine.  Allocate them
   during probe and release them.  Probe's job is to identify devices only.
 - Don't abuse the ivars pointer.. (!).  Create real ivars and use the
   proper access system.  (the bus_read_ivar method)
 - Don't add the children until attach() has successfully grabbed the
   hardware, otherwise there are potential leaks if attach fails.
2000-01-05 16:31:27 +00:00
KATO Takenori
6fb89845b4 Added following modes:
5in     HD 2 heads, 77 cylinders, 8 sectors/track, 1024 bytes/sector
 5/3.5in DD 2 heads, 80 cylinders, 8 sectors/track, 512 bytes/sector

Meanings of the rogrammer-readeble fd name were explained by Brian
Fundakowski Feldman and Peter Wemm in hackers list and NOKUBI
Hirotaka.

Reviewed by:	nyan
1999-12-28 07:38:38 +00:00
Joerg Wunsch
e34c71ea40 Add a flag to disable FIFO probing. The code seems to have a chance of
misdetecting FIFO capabilities, at least on my girlfriend's Thinkpad 755,
the driver doesn't work using the FIFO.

While i was at it, i (partially) fixed option FCC_YE since it would no
longer have compiled at all under -current.  I've also made an attempt
to document the device driver flags value (ab-)used internally by this
option.

RELENG_3 candidate, but with a slightly different patch there (will go
to jkh in email).
1999-12-21 08:33:03 +00:00
Peter Wemm
a2639a184d Add a truely evil workaround (hack!) for some unfortunate BIOS
programming practices.  It seems that newer fdc chips have an
alternative way of setting the transfer speed (including high speed
modes for floppy tape) that doesn't use the control register (which
we don't support - we use the old way only).  So, they (the BIOS
programmers) sometimes leave out the 0x3f6 control register from
the PnP ports descriptor(!!).  "Hey, it works with windows, so
what's the problem?" :-(  Anyway, this hack tries to compensate
for that.  This was discussed with dfr (who did the pnp attachment).
1999-12-06 06:59:09 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Peter Wemm
8de0675c61 Tidy up a few loose ends in the fifo setup code.
Don't use NFDC as an arbitary limit, it is not required and goes against
using PnP fdc devices (eg: when PNPBIOS is turned on, the motherboard
devices (sio, fdc, etc etc) are detected via PnP, not config(8).)
1999-11-18 05:15:09 +00:00
Doug Rabson
427ccf0071 Add code to support ISA PnP. 1999-11-11 08:48:40 +00:00
Peter Wemm
475ad603bb Use cdevsw_add() (temporarily) to avoid DEV_DRIVER_MODULE(), since the
make_dev()'s that are there are not enough.
1999-11-08 07:32:06 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
11a0be87e3 Two more devstat_end_transaction() -> devstat_end_transaction_buf(). 1999-09-19 12:43:34 +00:00
Poul-Henning Kamp
2186cd9e8d Use devstat_end_transaction_buf() rather than Use devstat_end_transaction() 1999-09-18 21:30:27 +00:00
Bruce Evans
887ba12fc5 Removed diskerr()'s unused d_name arg and updated callers. This fixes
warnings caused by the arg having the wrong type (not const enough).
The arg was also wrong (a full name instead of a short one) for calls
from from subr_diskmbr.c and pc98/diskslice_machdep.c.
1999-09-13 12:59:41 +00:00
Julian Elischer
85a219d201 Changes to centralise the default blocksize behaviour.
More likely to follow.

Submitted by: phk@freebsd.org
1999-09-09 19:08:44 +00:00
Doug Rabson
062acdb7e7 Change isa_get/set_flags() to device_get/set_flags(). 1999-09-07 08:42:49 +00:00
Peter Wemm
16e68fc605 Cosmetic tweak. Collect the fdc methods together and apart from the fd
methods so it's a little easier to seperate the two when reading the code.
1999-09-03 11:32:21 +00:00
Julian Elischer
7012bab988 Revert a bunch of contraversial changes by PHK. After
a quick think and discussion among various people some form of some of
these changes will probably be recommitted.

The reversion requested was requested by dg while discussions proceed.
PHK has indicated that he can live with this, and it has been agreed
that some form of some of these changes may return shortly after further
discussion.
1999-09-03 05:16:59 +00:00
Poul-Henning Kamp
02e1576966 Make bdev userland access work like cdev userland access unless
the highly non-recommended option ALLOW_BDEV_ACCESS is used.

(bdev access is evil because you don't get write errors reported.)

Kill si_bsize_best before it kills Matt :-)

Use the specfs routines rather having cloned copies in devfs.
1999-08-30 07:56:23 +00:00
Poul-Henning Kamp
9465bf4495 Initialize dev->si_bsize*, the floppy driver doesn't use dsopen(). 1999-08-28 08:10:13 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Julian Elischer
ada9bd8cb8 Add PHK's make_dev() into more places where DEVFS used to be
hooked in directly.

Alpha change checked by: Matthew Jacob <mjacob@feral.com>
i4b ISDN changes checked by: Udo Schweigert <ust@cert.siemens.de>
    and Hellmuth Michaelis <hm@hcs.de>
PC98 changes checked by: Takahashi Yoshihiro <nyan@FreeBSD.org>
1999-08-27 07:26:26 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Poul-Henning Kamp
49ff4debd3 Spring cleaning around strategy and disklabels/slices:
Introduce BUF_STRATEGY(struct buf *, int flag) macro, and use it throughout.
please see comment in sys/conf.h about the flag argument.

Remove strategy argument from all the diskslice/label/bad144
implementations, it should be found from the dev_t.

Remove bogus and unused strategy1 routines.

Remove open/close arguments from dssize().  Pick them up from dev_t.

Remove unused and unfinished setgeom support from diskslice/label/bad144 code.
1999-08-14 11:40:51 +00:00
Joerg Wunsch
25d01e9527 Revert rev 1.149. Bruce convinced me that the problem already disappeared
by the fix in rev 1.120, which i wasn't immediately aware of.
1999-07-29 11:27:33 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Joerg Wunsch
409aadb1c9 Hack to work around a NULL pointer dereferencation that can be triggered
by removing a floppy that as being operated on.

The spagghetti is hardly understandable at all anymore, so i can't
100 % ascertain this is really the Right Thing to do, maybe our new
floppy driver maintainer, Jesus Monroy Jr can do this. :-))
1999-07-21 12:19:44 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Kirk McKusick
67812eacd7 Convert buffer locking from using the B_BUSY and B_WANTED flags to using
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
1999-06-26 02:47:16 +00:00
Doug Rabson
a97c75b7ea * Change include file locations.
* Fix some misunderstandings about the return value of resource_int_value().
* Make it build on alpha (doesn't work yet...)
1999-05-31 18:39:17 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Doug Rabson
f7f2df54bb No support for pnp yet. 1999-05-30 11:12:30 +00:00
Bruce Evans
f86e40770a Fixed reset handling for motor off resets. I first fixed this together
with other reset handling in rev.1.83 but broke it in rev.1.120.  The
breakage didn't seem to cause any problems even on the system which had
problems ("extra" interrupts and botched handling thereof) before rev.1.83.
It only affects multi-floppy systems anyway.
1999-05-11 04:58:30 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
4fdff1649a GC unused #define id_physid id_scsiid 1999-05-08 18:13:15 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Poul-Henning Kamp
c48d17750f Introduce two functions: physread() and physwrite() and use these directly
in *devsw[] rather than the 46 local copies of the same functions.

(grog will do the same for vinum when he has time)
1999-05-07 07:03:47 +00:00
Poul-Henning Kamp
b0eeea2042 remove b_proc from struct buf, it's (now) unused.
Reviewed by:	dillon, bde
1999-05-06 20:00:34 +00:00
Peter Wemm
edfdec1910 Disable FDC_YE - it's broken at present (breaking LINT) and awaiting some
pccard fixups.
Make DEVFS compile, it breaks LINT.
1999-05-02 20:38:08 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Peter Wemm
2ada239c12 Use reference counted PHOLD/PRELE rather than the P_PHYSIO flag. 1999-04-06 03:06:51 +00:00
Kenneth D. Merry
2a888f938e Add a prioritization field to the devstat_add_entry() call so that
peripheral drivers can determine where in the devstat(9) list they are
inserted.

This requires recompilation of libdevstat, systat, vmstat, rpc.rstatd, and
any ports that depend on the devstat code, since the size of the devstat
structure has changed.  The devstat version number has been incremented as
well to reflect the change.

This sorts devices in the devstat list in "more interesting" to "less
interesting" order.  So, for instance, da devices are now more important
than floppy drives, and so will appear before floppy drives in the default
output from systat, iostat, vmstat, etc.

The order of devices is, for now, kept in a central table in devicestat.h.
If individual drivers were able to make a meaningful decision on what
priority they should be at attach time, we could consider splitting the
priority information out into the various drivers.  For now, though, they
have no way of knowing that, so it's easier to put them in an easy to find
table.

Also, move the checkversion() call in vmstat(8) to a more logical place.

Thanks to Bruce and David O'Brien for suggestions, for reviewing this, and
for putting up with the long time it has taken me to commit it.  Bruce did
object somewhat to the central priority table (he would rather the
priorities be distributed in each driver), so his objection is duly noted
here.

Reviewed by:	bde, obrien
1999-02-10 00:04:13 +00:00
Peter Wemm
d17e4ee67d Update the pccard hooks to use a module style declaration instead. 1999-01-19 00:21:53 +00:00
Bruce Evans
e93e63cb39 Fixed corruption of the fd buffer queue. Once upon a time, the active
buffer had to be left on the head of the queue for [bufq]disksort()
to sort against.  This isn't right for devices that can support multiple
active i/o's, and only the fd driver did it.  "Fixing" this in rev.1.36
of ufs_disksubr.c broke the fd driver in much the same way as rev.1.52
of <sys/buf.h> broke it (see rev.1.119).

Bug reported and fix tested by:	dt
1999-01-15 09:15:27 +00:00
Poul-Henning Kamp
fc47545ec3 Pre 3.0 branch cleanup casualty #6: ft 1998-12-27 13:40:57 +00:00
Bruce Evans
ff9607b070 Fixed LINT breakage in previous commit. Option FDC_YE enabled a
syntax error.  Options FDC_YE and DEVFS together enabled references
to a nonexistent variable and calls of a nonexistent function.
1998-12-14 16:29:58 +00:00
Warner Losh
69acd21dfd Add support for the YE-Data external PCMCIA floppy driver. This
floppy is used on the toshiba Libretto line of subnotebook computers.
It differs from a normal floppy in that you must use PIO rather than
DMA to transfer the data.

To enable this, you must add options "FDC_YE" to your kernel.  I don't
have a machine that has a floppy and a pcmcia slot to test to make
sure that this doesn't impact normal floppy units, so I've left this as
an option.

I have ported this to -current and made an attempt to ensure that the
indentation conforms to style(9), aka the bruce filter.

Reviewed by:	nate, markm
Submitted by:	David Horwitt (dhorwitt@ucsd.edu)
1998-12-12 08:16:01 +00:00
Eivind Eklund
2ae353f9a7 Rename one of the two devfs_link's to devfs_makelink. 1998-12-10 19:57:01 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Justin T. Gibbs
9f02ad6073 Nuke uninitialized varible fd from retrier(). Change the devstat code
to reference fdc->fd instead.
1998-09-15 22:07:24 +00:00
Justin T. Gibbs
b2dfb1f906 Update system to new device statistics code.
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
		mike@smith.net.au (Mike Smith)
1998-09-15 08:15:30 +00:00
Søren Schmidt
d024c95599 Remove the SLICE code.
This clearly needs alot more thought, and we dont need this to hunt
us down in 3.0-RELEASE.
1998-09-14 19:56:42 +00:00
Bruce Evans
5c1a1eae83 Fixed error handling:
- Call isa_dmadone() whenever necessary to stop DMA and/or free bounce
  buffers.  Undead DMA corrupted the malloc freelist fairly consistently
  in the following configuration: SLICE kernel, 2 floppy drives, no disk
  in fd0, disk in fd1.
- Don't call fdc_reset() from fd_timeout().  Doing so gave an "extra"
  interrupt which was usually misinterpreted as being for completion
  of the next FDC command; the interrupt for completion of the next
  FDC command was then usually misinterpreted...  There were further
  complications for interrupts latched by the soft-spl mechanism so
  that they were delivered after all the h/w interrupts went away.
  This caused at least wrong head settle delays and may be why the
  FreeBSD floppy driver seems to munch floppies more than most floppy
  drivers.  The reset was unnecessary anyway in cases that didn't have
  the bug described next, since is was repeated a little later for
  the IOTIMEDOUT state.  The state machine has complications to handle
  resets correctly, so just use it.
- Don't call retrier() from fd_timeout().  The IOTIMEDOUT state needs
  to be processed next, and it isn't valid to set to that state if
  retrier() has aborted the current transfer.  Doing so caused null
  pointer panics after the previous bug was fixed.

Improved error handling:
- If an i/o is aborted, arrange to reset in the state machine before
  doing the next i/o.  New fdc flag for this.  This fixes spurious
  warnings and lengthy busy-waiting for the next i/o.
- Split STARTRECAL into RESETCOMPLETE and STARTRECAL and only check
  for the results from reset if we actually reset.  This fixes spurious
  warnings for other paths to STARTRECAL.  [Oops, it may break reset
  handling for motor-off resets.]

Cleanups in fd_timeout():
- Renamed to fd_iotimeout() to make it clearer that it is only used
  for i/o.
- Don't handle the bp == 0 case.  This case can't happen for i/o.
- Don't check for controller-busy.  We know it must be.
- Don't print anything.  retrier() already prints too much for normal
  errors.
- Fudge the state differently so that the state machine advances
  fdc->retry and the status is invalid (perhaps this should fudge a
  valid state like the one for WP).
- Style fixes.
1998-07-29 13:00:42 +00:00
Bruce Evans
e5d7d24361 Fixed error handling after a seek error that can't happen. When the
controller reports a successful seek, it is very unlikely to report
seeking to a cylinder other than the one requested, but we check for
this, and botched the error handling for the requested_cylinder != 0
case.  This error happened when the bug fixed in rev.1.52 of <sys/buf.h>
caused the head of buffer queue to change to one starting on a different
cylnder - the requested cylinder was found, but it wasn't what we
thought we requested.  The fix is simply to arrange to reset the state
machine.

Corruption of the buffer queue seems to only have been a problem in the
floppy driver.  Other drivers dequeue the head of the queue before doing
physical i/o on it, so the corruption at worse broke the elevator sort
order.  Dequeueing breaks it anyway.
1998-07-18 03:15:33 +00:00
Bruce Evans
29d6b96d69 The ioctl request arg is unsigned long, so don't attempt to pass it
around as signed int.
1998-07-15 09:59:31 +00:00
Julian Elischer
ad27f8d9a5 SLICE probing becomes asynchronous. It can now be triggered by
interupt level events. This needs a lot of cleanup, but has been working
here for a month or two.. originally needed for CAM integration
but that hasn't happenned yet. The probing  state machines for each
handler should be replaced by a more generic state-service. It's
still quite messy in there..
1998-07-13 08:23:05 +00:00
Bruce Evans
a838d83d8f Don't pretend to support ix86's with 7-bit ints by using longs just to
ensure 8-bit variables.  Doing so mainly bogotified some printf formats.
1998-07-11 06:35:39 +00:00
Julian Elischer
f7ea2f55d1 There is no such thing any more as "struct bdevsw".
There is only cdevsw (which should be renamed in a later edit to deventry
or something). cdevsw contains the union of what were in both bdevsw an
cdevsw entries.  The bdevsw[] table stiff exists and is a second pointer
to the cdevsw entry of the device. it's major is in d_bmaj rather than
d_maj. some cleanup still to happen (e.g. dsopen now gets two pointers
to the same cdevsw struct instead of one to a bdevsw and one to a cdevsw).

rawread()/rawwrite() went away as part of this though it's not strictly
the same  patch, just that it involves all the same lines in the drivers.

cdroms no longer have write() entries (they did have rawwrite (?)).
tapes no longer have support for bdev operations.

Reviewed by: Eivind Eklund and Mike Smith
	Changes suggested by eivind.
1998-07-04 22:30:26 +00:00
Doug Rabson
498b291e26 Fix some more ioctls which I missed becausese they were hidden by options
which were not in LINT.
1998-06-07 19:40:41 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Julian Elischer
9b7408fe46 There is no dump routine for fd so give it an explicit NULL entry
in the SLICE table.
1998-05-06 23:35:36 +00:00
Julian Elischer
7f2f1b784e Add dump support to the DEVFS/slice code.
now we can actually catch our crashes :-)

Submitted by: Luoqi Chen <luoqi@chen.ml.org> (the man who's everywhere)
1998-05-06 22:14:48 +00:00
Julian Elischer
26d3bf5f1b close() is no longer a SLICE method.
Close is simply an open with no-read and no-write once internal to SLICE
(it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
Julian Elischer
3e425b968d Add changes and code to implement a functional DEVFS.
This code will be turned on with the TWO options
DEVFS and SLICE. (see LINT)
Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes.

/dev will be automatically mounted by init (thanks phk)
on bootup. See /sys/dev/slice/slice.4 for more info.
All code should act the same without these options enabled.

Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others

This code does not support the following:
bad144 handling.
Persistance. (My head is still hurting from the last time we discussed this)
ATAPI flopies are not handled by the SLICE code yet.

When this code is running, all major numbers are arbitrary and COULD
be dynamically assigned. (this is not done, for POLA only)
Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Poul-Henning Kamp
ab3f746966 In all such uses of struct buf: 's/b_un.b_addr/b_data/g' 1997-12-02 21:07:20 +00:00
Joerg Wunsch
0722d6aba3 Introduce a device flags value of 0x1 to always pretend a 1.44 MB
floppy drive #0, regardless of what the CMOS says.  This is intended
as a bandaid for those plagued with Compaq's idea to not announce the
floppy drive on their `Aero' notebook.

Using the device flags is not very nice (in particular since they
aren't per-drive but per-controller), but still looks a lot better to
me than the disgusting guesswork hack that was recently posted to
-hackers.

Doc update will follow shortly.
1997-10-19 13:12:02 +00:00
Justin T. Gibbs
27651b7faa Fix a call to timeout that wasn't properly saving it's callout handle.
Submitted by:	 durian@plutotech.com
1997-09-23 22:14:43 +00:00
Justin T. Gibbs
02a199102d aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

	Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

	Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
Tor Egge
d66c374f58 Enable the FIFO on enhanced floppy controllers. This reduces the
number of dma overruns/underruns for systems under heavy dma load.
As a side effect, broken enhanced floppy controllers that sometimes
don't detect dma overruns/underruns will give less errors.

Reviewed by:	j@uriah.heep.sax.de (J Wunsch)
1997-09-17 20:16:17 +00:00
Joerg Wunsch
d2fb48929a Make FDC_DEBUG a supported option.
Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented
option, since people started to trust the bogus claim.  Once we're going
to handle 2.88 MB controllers, we have to redo the chip detection, by
now just leave it hidden.
1997-09-16 07:45:45 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Bruce Evans
3ac4d1ef0c Don't #include <sys/fcntl.h> in <sys/file.h> if KERNEL is defined.
Fixed everything that depended on getting fcntl.h stuff from the wrong
place.  Most things don't depend on file.h stuff at all.
1997-03-23 03:37:54 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
John Dyson
996c772f58 This is the kernel Lite/2 commit. There are some requisite userland
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.

The system boots and can mount UFS filesystems.

Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
		Mount_std mounts will not work until the getfsent
		library routine is changed.

Reviewed by:	various people
Submitted by:	Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
d43190805d Disabled half-baked disk statistics support. It didn't actually generate
statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
Joerg Wunsch
bb6382fae2 Fix the broken EOF handling in the floppy driver. The most obvious
appearance of this bug was the malfunctioning -M option in GNU tar (it
worked only by explicitly specifying -L).

Reviewed by:	bde, and partially corrected accoring to his comments

Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Poul-Henning Kamp
cba8a5ddd3 Make a "DWIM" function for adding [bc]devsw entries for bdev drivers.
Saves about 280 butes of source per driver, 56 bytes in object size
and another 56 bytes moves from data to bss.

No functional change intended nor expected.

GENERIC should be about one k smaller now :-)
1996-07-23 21:52:43 +00:00
Bruce Evans
cba2a7c614 Staticized a few variables.
Fixed warnings about unused variables.
1996-07-12 07:41:34 +00:00
Poul-Henning Kamp
14212c9d29 Typo. 1996-05-03 20:15:11 +00:00
Poul-Henning Kamp
17542807e5 Move from the old buf.b_actf to the new TAILQ(buf.b_act). 1996-05-03 14:57:27 +00:00
Sujal Patel
100f78bbe0 Update drivers to use isa_dma_acquire() and isa_dma_release()
Reviewed by:	bde
1996-04-08 19:40:57 +00:00
Bruce Evans
3157adc8af Removed now-unused #includes of <machine/cpu.h>. They were for bootverbose
being declared in the wrong place.
1996-04-07 17:32:42 +00:00
Bruce Evans
2151975455 Fixed devfs device names and numbers.
Fixed handling of unknown CMOS types - don't attach unrecognized devices.
1996-04-07 14:46:42 +00:00
Marc G. Fournier
ecd87fe6c3 changed from using dev_link() to devfs_link() 1996-04-02 04:52:03 +00:00
Joerg Wunsch
0e317d05cc Fetch the (dummy) READY CHANGED condition interrupt stati that
happen after an FDC reset.

Submitted by:	bde
1996-03-31 18:04:51 +00:00
Bruce Evans
f85120ac5b Fixed group of some more disk devices.
Fixed devfs function names.
1996-03-29 11:45:12 +00:00
Marc G. Fournier
6e18ce4676 Switched from using devfs_add_sw() to using devfs_add_swf()
Reviewed by:	julian@freebsd.org
1996-03-28 14:29:52 +00:00
Bruce Evans
8335c1b8ae Don't turn off the motor on active drives. The motor timeout may
occur while a command is in progress if the system is overloaded
or was stopped at a debugger breakpoint.
1996-02-25 21:01:31 +00:00
Bruce Evans
c8f2fe8db8 First attempt at creating devfs entries for sliced devices. Doesn't
quite work yet, so the heart of it is disabled.

Added bdev and cdev args to dsopen().

drivers:
Fixed device names, links, minor numbers and modes.

wd.c:
Started actually supporting devfs.

diskslice.h:
Added devfs tokens to structs (currently 576 of them per disk! :-().

subr_diskslice.c:
Create devfs entries in dsopen() and (unsuccessfully) attempt to make
them go away at the right times.  DEVFS is #undefed at the start so
that this shouldn't cause problems.
1996-01-27 04:18:15 +00:00
Bruce Evans
dd87702a51 Allocate DMA bounce buffers only when requested by drivers. Only the
fd and wt drivers need bounce buffers, so this normally saves 32K-1K
of kernel memory.

Keep track of which DMA channels are busy.  isa_dmadone() must now be
called when DMA has finished or been aborted.

Panic for unallocated and too-small (required) bounce buffers.

fd.c:
There will be new warnings about isa_dmadone() not being called after
DMA has been aborted.

sound/dmabuf.c:
isa_dmadone() needs more parameters than are available, so temporarily
use a new interface isa_dmadone_nobounce() to avoid having to worry
about panics for fake parameters.  Untested.
1996-01-27 02:33:48 +00:00
Bruce Evans
f332b8a1d5 Replaced nxdump by nodump (if the dump function gets called, then the
device must be configured, so ENXIO is a bogus errno).

Replaced zerosize by nopsize.  zerosize was a temporary alias.
1995-12-10 19:44:58 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
Julian Elischer
4d92e19833 clean a few DEVFS things..
fix a bug where you couldn't place devices in the root directory
of devfs

remove deprecated routines

On my machine devfs now shows:
julian@erf.tfs.com:
julian@erf.tfs.com: ls -RF
bpf0            mem             ptypb           spkr            ttyp8
bpf1            null            ptypc           stderr          ttyp9
bpf2            pcaudio         ptypd           stdin           ttypa
bpf3            pcaudioctl      ptype           stdout          ttypb
console         pt              ptypf           tty             ttypc
cuaa0           ptyp0           random          ttyd0           ttypd
cuaia0          ptyp1           rsd0            ttyid0          ttype
cuala0          ptyp2           rsd1            ttyld0          ttypf
fd/             ptyp3           rvn             ttyp0           tun0
fd0.1440        ptyp4           rworm           ttyp1           urandom
fd1.1200        ptyp5           scsi/           ttyp2           vn
io              ptyp6           sd0             ttyp3           zero
kmem            ptyp7           sd1             ttyp4
lkm             ptyp8           snp0            ttyp5
log             ptyp9           snp1            ttyp6
lpt0            ptypa           snp2            ttyp7

./fd:
0       15      21      28      34      40      47      53      6       9
1       16      22      29      35      41      48      54      60
10      17      23      3       36      42      49      55      61
11      18      24      30      37      43      5       56      62
12      19      25      31      38      44      50      57      63
13      2       26      32      39      45      51      58      7
14      20      27      33      4       46      52      59      8

./scsi:
sctarg  ssc
julian@erf.tfs.com:

which is all devices really there except for disk slices/partitions..
(if I don't have it it's not there, which has GOT to be an improvement..)

no DEVFS fixes from device maintainers yet?
1995-12-09 09:11:25 +00:00
Poul-Henning Kamp
d2f265fab8 Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
Julian Elischer
7146c13e43 the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void 	sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
        sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
	{ sdopen,	sdclose,	sdstrategy,	sdioctl,	/*4*/
	  sddump,	sdsize,		0 };

struct cdevsw sd_cdevsw =
	{ sdopen,	sdclose,	rawread,	rawwrite,	/*13*/
	  sdioctl,	nostop,		nullreset,	nodevtotty,/* sd */
	  seltrue,	nommap,		sdstrategy };

static sd_devsw_installed = 0;

static void 	sd_devsw_install()
{
	dev_t descript;
	if( ! sd_devsw_installed ) {
		descript = makedev(CDEV_MAJOR,0);
		cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
		descript = makedev(BDEV_MAJOR,0);
		bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
		sd_devsw_installed = 1;
	}
}
#endif /* JREMOD */
1995-11-28 09:42:06 +00:00
Poul-Henning Kamp
4b2af45f4b Mega commit for sysctl.
Convert the remaining sysctl stuff to the new way of doing things.
the devconf stuff is the reason for the large number of files.
Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
Bruce Evans
27513ca73b Fixed (nonexistent) initialization of bp->b_pblkno. disksort() for
floppies must have been random in 2.x since we reintroduced sorting
on b_pblkno on 1995/03/18.  Drivers still initialize b_cylin/b_resid
although this is no longer used.

Removed unused, wrong function fdsize().  (Returning 0 means that the
device exists and has size 0, not that the device doesn't exist.
swaponvp() allows for size 0 by stupidly calling the d_psize function
twice if the size isn't 0.  setdumpdev() doesn't allow for it.)

Continued removing /* ARGSUSED */ from drivers.
1995-11-18 07:48:11 +00:00
Bruce Evans
4ff3de8e80 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
Bruce Evans
4fda91c705 Moved prototypes for devswitch functions from conf.c and driver sources
to <machine/conf.h>.  conf.h was mechanically generated by
`grep ^d_ conf.c >conf.h'.  This accounts for part of its ugliness.  The
prototypes should be moved back to the driver sources when the functions
are staticalized.
1995-11-04 13:25:33 +00:00
Poul-Henning Kamp
4ccc87c594 Remove unused functions and variables, make things static, and other cleanups. 1995-10-28 15:39:31 +00:00
Joerg Wunsch
86a727d96d BIOS manufacturers don't seem to have a unique idea about 2.88 MB
floppy drive types in the CMOS; add 0x50 as an alias for 2.88 MB.
1995-10-09 15:00:39 +00:00
Joerg Wunsch
16b04b6ae7 Hide the "input/output timeout" messages behind the bootverbose case.
This message has been confusing innocent ft users.

It should go into 2.1 as well, it's a very simple fix.
1995-10-04 07:01:23 +00:00
Bruce Evans
191e1a59da Remove transitory labelling code. Labels are now handled by essentially
the original 4.4lite code.  Machine Specific Partitions are now handled
separately.
1995-09-16 17:04:06 +00:00
Julian Elischer
8af5d536ff devfs changes..
changes to allow devices that don't probe (e.g. /dev/mem)
to create devfs entries
this required giving 'configure' its own SYSINIT entry
so we could duck in just before it with a DEVFS init
and some device inits..
my devfs now looks like:
./misc
./misc/speaker
./misc/mem
./misc/kmem
./misc/null
./misc/zero
./misc/io
./misc/console
./misc/pcaudio
./misc/pcaudioctl
./disks
./disks/rfloppy
./disks/rfloppy/fd0.1440
./disks/rfloppy/fd1.1200
./disks/floppy
./disks/floppy/fd0.1440
./disks/floppy/fd1.1200
also some sligt cleanups.. DEVFS needs a lot of work
but I'm getting back to it..
1995-09-03 05:43:50 +00:00
Rodney W. Grimes
d3628763db Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Rodney W. Grimes
2d9d0204f7 Fix -Wformat warnings, still need to do something about %b and pointer
type args.
1995-05-09 12:26:00 +00:00
Joerg Wunsch
85827d9c13 Restructured the floppy tape probe.
The ``flags 1'' in the fdc line is now only needed for owners of an
Insight tape (perhaps there aren't any?  Mine is disfunctional).  All
other probes are safe wrt. to the motor-control line of floppy disk
drives.  Document the flag in LINT finally.
1995-05-06 19:34:28 +00:00
Julian Elischer
999422d707 Reviewed by: no-one yet, but non-intrusive
Submitted by:	julian@tfs.com
Obtained from:	written from scratch

slight changes to make space for devfs..
(also conditional test code in i386/isa/fd.c)

===================================================================
RCS file: /home/ncvs/src/sys/sys/malloc.h,v
retrieving revision 1.7
diff -r1.7 malloc.h
113a114,117
> #define M_DEVFSMNT    62      /* DEVFS mount structure */
> #define M_DEVFSBACK   63      /* DEVFS Back node */
> #define M_DEVFSFRONT  64      /* DEVFS Front node */
> #define M_DEVFSNODE   65      /* DEVFS node */
184c188,192
<       NULL, NULL, NULL, NULL, NULL, \
---
>       "DEVFS mount",  /* 62 M_DEVFSMNT */ \
>       "DEVFS back",   /* 63 M_DEVFSBACK */ \
>       "DEVFS front",  /* 64 M_DEVFSFRONT */ \
>       "DEVFS node",   /* 65 M_DEVFSNODE */ \
>       NULL, \
Index: sys/mount.h
===================================================================
RCS file: /home/ncvs/src/sys/sys/mount.h,v
retrieving revision 1.16
diff -r1.16 mount.h
100c100,101
< #define       MOUNT_MAXTYPE   15
---
> #define MOUNT_DEVFS   16      /* existing device Filesystem */
> #define       MOUNT_MAXTYPE   16
118a120
>       "devfs",        /* 15 MOUNT_DEVFS */ \
Index: sys/vnode.h
===================================================================
RCS file: /home/ncvs/src/sys/sys/vnode.h,v
retrieving revision 1.19
diff -r1.19 vnode.h
61c61
<       VT_UNION, VT_MSDOSFS
---
>       VT_UNION, VT_MSDOSFS, VT_DEVFS
1995-04-20 03:18:19 +00:00
Garrett Wollman
6c0081e92b Add a class field to devconf and mst drivers.
For those where it was easy, drivers were also fixed to call
dev_attach() during probe rather than attach (in keeping with the
new design articulated in a mail message five months ago).  For
a few that were really easy, correct state tracking was added as well.
The `fd' driver was fixed to correctly fill in the description.
The CPU identify code was fixed to attach a `cpu' device.  The code
was also massively reordered to fill in cpu_model with somethingremotely
resembling what identifycpu() prints out.  A few bytes saved by using
%b to format the features list rather than lots of ifs.
1995-04-12 20:48:13 +00:00
Rodney W. Grimes
74fa89f4f5 Correct recalibrate/seek code at attach time so that we do not get
all the ``fdc0: ready for output in input'' messages when probing
for ft devices.

Submitted by:	Steve Gerakines <steve2@genesis.tiac.net>
1995-04-06 07:20:16 +00:00
Rodney W. Grimes
6a0e6f4266 Terminate all probe/diagnostic/error messages correctly with a \n.
Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of
ways the current scheme failed to end the output with \n.

Add controller and/or drive designator to the fron of several messages
that come from this drive.  [It's not fun to track down driver messages
using grep over the source tree.]
Reviewed by:	joerg
1995-03-26 19:28:22 +00:00
Bruce Evans
b5e8ce9f12 Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) and most of the warnings from
`gcc -Wnested-externs'.  Fix all the bugs found.  There were no serious
ones.
1995-03-16 18:17:34 +00:00
Joerg Wunsch
82f5379bc5 Finally get rid of this bothering ``biodone: buffer already done''
warning.  The buffer needs only to be `biodone()' again if the format
operation timed out; otherwise fdstate() did already do the job.
1995-03-12 22:40:56 +00:00
Bruce Evans
671e2cee97 Declare all the args of Fdopen() and fdclose().
Initialize dk_wpms[] less bogusly.

Clean up includes.

Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
Jordan K. Hubbard
ae099941e3 Back out my previous change and disable the floppy tape controller again
by default.  It's hosing up my test machine's floppy pretty good.
1995-01-27 20:03:07 +00:00
Jordan K. Hubbard
0b3782714e Enable floppy-tape controller by default again. Flags no longer has any
special meaning.
1995-01-17 17:32:33 +00:00
Joerg Wunsch
dac0f2dbc1 Argl!, finally found this bummer. The code testing for a write-
protected drive at open() time has been *totally bogus*!  The guy who
submitted it didn't understand all the implications of calling
set_motor(), and the `who' who included the patch into the tree did it
blindly...  Pleeeeze, don't commit code to this driver unless you are
really going to understand what it does!  This one caused me to pull
out even more hears, and those who know me do know that i ain't got
too many o'them. :-)
1995-01-12 19:20:28 +00:00
Joerg Wunsch
dc16046f96 Finally implement support for the `lsdev' program. The controller is
now marked busy as long as it's being in non-reset state, and the
drives are busy as long as at least one instance is open.

Also reformat everything to fit into 80 columns again.

Changed my mind wrt. error reporting for a write-protected drive and
an open() with write intent; ENXIO has been too weird, now return EIO.
Some portions of the code need to be rewritten to use tprintf()
instead of simple printf()'s, so the messages will also appear on the
session terminal, however.
1995-01-11 16:13:01 +00:00
Joerg Wunsch
dc5df763e4 Peter's work to work around one of the most annoying bugs in the
floppy driver (or in the hardware?).  It turned out to be caused by
spurious interrupts, right after an FDC reset.

Also major cleanup in the low-level structure, there are now functions
performing error-checks for the FDC I/O.

Submitted by:	(mostly) Peter Dufault <dufault@FreeBSD.org>
1995-01-06 15:20:00 +00:00
Joerg Wunsch
290dd077ef Here is a minor patch for FreeBSD 2.0R to allow it to recognize
2.88MB floppy drives.  All it does is set the type to 1.44MB if
it finds the 2.88MB drive.

Submitted by:	Andrew Gillham <gillham@andrews.edu>
1994-12-04 20:22:20 +00:00
Jordan K. Hubbard
1ca6f46d56 Reverse the meaning of previous change.
Now floppy tape support is *disabled* unless you specifically
request otherwise.  Poul wanted it this way, and I guess I'm not going to argue
though it may seem counter-intuitive.  We can always change it back, later.
1994-11-30 12:04:28 +00:00
Jordan K. Hubbard
8580379053 Experimental change to floppy driver to NOT probe the floppy tape if
flags & 0x1.  Somebody should build a kernel with this and see if
the floppy-tape damaged people can turn it off properly with userconfig.
I can't reproduce the original problem here.
1994-11-29 15:46:20 +00:00
Poul-Henning Kamp
04b734cf24 Extended the SEEKWAIT and RECALWAIT somewhat to avoid annoying messages. 1994-11-18 10:18:36 +00:00
Andrey A. Chernov
4b69fb52f4 Change "fdx: Floppy not writeable" to less confusing
"fdx: write protected". Not writeable maybe means bad, etc.
1994-11-08 06:34:04 +00:00
Jordan K. Hubbard
6febd9aaf5 From: Lars Fredriksen <fredriks@mcs.com>
Here is a patch to fd.c that will check to make sure the floppy
is not writeprotected when you try to open the device RW.
Submitted by:	lars
1994-11-08 05:42:10 +00:00
Jordan K. Hubbard
5e235068bc Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install
floppies now.  I'm not sure why, but things hang when it gets to the
`changing root to fd0c' part.  Without your latest commit, everything works
fine.  Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
Joerg Wunsch
5d04c702eb Several minor fixes to the floppy driver:
.	avoid resetting the FDC every time the last motor is going off;
	instead, give it a 60-second period for possible later reactivation.
	This prevents us from needing to recalibrate the FDC too often,
	but still allows for an ``automagic error recovery', just in case the
	controller is absolutely stuck. (Simply wait for 60 seconds, and
	try it again.)

.	made the floppy head settle time after a seek a constant
	that might be overridden by a config option. (Well, actually the
	divisor of the settle time). Pepople often reported problems with
	their floppies, so i need a simply mechanism that allows them
	to play with that value. (I personally cannot find any problem
	on *my* drives.)

.	implement the FD_DEBUG ioctl command, in case the driver
	is compiled with DEBUG turned on.

.	removed a bogus parameter from a printf; the remaining warnings
	from gcc -Wall seem to be warnings about the %b format gcc cannot
	understand

.	rearrange Garett's code to fit better in the existing structure
	of #define/type/function ordering.

.	make everything fit into 79 columns again.
1994-10-30 20:04:40 +00:00
Jordan K. Hubbard
54c7241bd3 Julian Elischer's disklabel fixes. 1994-10-27 20:45:13 +00:00
Garrett Wollman
2f86936a07 Finished device configuration database work for all ISA devices (except `ze')
and all SCSI devices (except that it's not done quite the way I want).  New
information added includes:

-	A text description of the device
-	A ``state''---unknown, unconfigured, idle, or busy
-	A generic parent device (with support in the m.i. code)
-	An interrupt mask type field (which will hopefully go away) so that
.	  ``doconfig'' can be written

This requires a new version of the `lsdev' program as well (next commit).
1994-10-23 21:28:03 +00:00
Joerg Wunsch
dc8603e3ec Checking for timeout at several critical calls to ``out_fdc()'' now,
so i hope i've finally removed all the occasions where the driver
got stuck when there's no floppy in the drive.
Also attemmpting to  omit the error mesage for ``recalib failed''
for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
Garrett Wollman
f1d8109335 Add support for devconf to a large number of device drivers, and do
the right thing in dev_goawayall() when kdc_goaway is null.
1994-10-19 01:59:11 +00:00
Garrett Wollman
922006325b isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize().
fd.c: register devices and implement disk stats.
wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
Poul-Henning Kamp
702c623a8a Cosmetics. Silence gcc -Wall. Much more to do here :-( 1994-10-10 01:12:27 +00:00
Poul-Henning Kamp
8c0390626e An ifdef almost hit where it was supposed to go. Joerg owes me a good
German beer I think...
1994-09-25 23:37:38 +00:00
Joerg Wunsch
c7a64a0369 Copied over the transfer speed definitions from sys/i386/isa/fdreg.h.
This is needed for having the fdformat program no longer searching
non-public include paths.
Protect the definitions in fdreg.h against double inclusion.
1994-09-25 18:42:23 +00:00
Poul-Henning Kamp
87eafbcacd Moved the ft.c from 1.1.5.1 over. It works on my Conner thingie. Got
rid of a ton of unused vars at the same time.
1994-09-25 06:04:25 +00:00
Joerg Wunsch
6b7bd95b6d Fixed the problem where the floppy has incorrectly failed probing
when the drive had been left on a cylinder > 67 after kernel boot. The
most common case for this is booting a kernel that is located on
the inner cylinders of a floppy.

Also removed all occurences of spinwait(), replaced by DELAY.
Nuked a return line saying nothing, this might make Bruce happy 8^)

Submitted by:	partially by Bruce Evans
1994-09-17 18:08:36 +00:00
David Greenman
3a2f7427fe Updated driver to the 1.1.5 version:
date: 1994/05/22 12:35:38;  author: joerg;  state: Exp;  lines: +6 -6
First round of floppy changes. Try making `fd' more robust.

New features:
  .  ioctl command for setting the drive type (density etc.); restricted
     to the super-user
  .  ioctl for getting/seting `drive options'; currently only option
     is FDOPT_NORETRY: inhibit the usual retries; used when verifying
     a newly formatted track

Fixes:
  .  function prototypes
  .  made all internal functions `static'
  .  cleaned up & corrected .h files
  .  restructured, to make the chaotic function sequence more rational
  .  compiled with -Wall, and cleared all warnings
  .  introduced a mirror for the (write-only) `digital output register',
     to avoid the current kludge
  .  device probing completed by seeking/recalibrating, and looking
     for track 0 being found
  .  holding the controller down in reset state while it is idle (and
     thus saving allot of headaches)
  .  make requests fail that are not a multiple of the (physical)
     sector size
  .  removed the fixed physical sector size (512 bytes), allowing for any
     size the controller could handle (128/256/512/1024 bytes)
  .  replaced some silly messages
  .  fixed the TRACE* macro usage, debugging reports should be complete
     now again (debugging output is HUGE! though)
  .  removed fd_timeout for SEEK command; seeks are always reported by
     the controller to succeed, since the `success' only refers to the
     controller's idea of success - there is no hardware line to tell about
     the seek end (other than the `track 0' line)
  .  catch SENSEI's that report about a `terminated due to READY changed'
     status - could happen after a controller reset
  .  converted ``hz / <something>'' divide operations to divisors that are
     powers of two, so gcc can optimize them into shifts
  .  write/format operations are checked against a write-protected medium
     now *prior* starting the operation
  .  error reports of `invalid command' and `wrong cylinder' will cause
     shortcuts in the retrier() now
  .  fixed a bug in the retrier() causing bogus block numbers to be reported
  .  fdformat() does care for errors now

Known Bugs:
  .  no attempts have been made (yet) to improve the performance
  .  sometimes, bogus ``seek/recalib failed'' messages are logged; this
     is still a bug in the driver, but it's not harmful since it's
     usually caught by the retrier()

Reviewed by:
Submitted by:
Obtained from:
1994-09-17 16:56:10 +00:00
Andrey A. Chernov
b2be795bf2 Use RAW_PART=2 to trick diskerr 1994-08-29 21:32:31 +00:00
Paul Richards
d091793974 Ran ft.c through ident.
Added a missing #ifdef INET wrapper in lpt.c

Main change:
	Removed the timeout_func_t casts from timeout calls and
	correctly defined the timeout routines to conform to
	the new format.
lpt.c doesn't have this change.

Reviewed by:
Submitted by:
1994-08-23 07:52:29 +00:00
Garrett Wollman
f540b1065a Change all #includes to follow the current Berkeley style. Some of these
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.

This also includes support for second-directory compiles.  This is not
quite complete yet, as `config' doesn't yet do the right thing.  You can
still make it work trivially, however, by doing the following:

rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
1994-08-13 03:50:34 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
David Greenman
0e195446b7 Bug fixes and performance improvements from John Dyson and myself:
1) check va before clearing the page clean flag. Not doing so was
	causing the vnode pager error 5 messages when paging from
	NFS. (pmap.c)
2) put back interrupt protection in idle_loop. Bruce didn't think
	it was necessary, John insists that it is (and I agree). (swtch.s)
3) various improvements to the clustering code (vm_machdep.c). It's
	now enabled/used by default.
4) bad disk blocks are now handled properly when doing clustered IOs.
	(wd.c, vm_machdep.c)
5) bogus bad block handling fixed in wd.c.
6) algorithm improvements to the pageout/pagescan daemons. It's amazing
	how well 4MB machines work now.
1994-04-20 07:06:57 +00:00
Nate Williams
e7e0afea3b From: Jim Babb <babb@sedhps01.mdc.com>
Subject: Re: Bugs with floppy drives
Date: Tue, 8 Mar 94 9:11:54 CST

The transfer speed was only set in the retry after error, not  when
switching drives.
1994-03-08 16:25:29 +00:00
Andrey A. Chernov
b0568305d3 360 DD entry speed fixed to 250KBPS 1994-03-02 18:34:41 +00:00
Andrew Moore
56ef028575 floppy tape support shouldn't interfere with floppy disk driver on
systems with no floppy tape drive (patch from Jim Babb).
1994-03-02 08:10:42 +00:00
Nate Williams
a60eff2770 From: Jim Babb <babb@sedhps01.mdc.com>
Date: Mon, 14 Feb 94 15:57:14 CST

This adds a copyright to the fdc.h file and fixes a bug in re-tries
during writes on a heavily loaded system.
1994-02-14 22:24:28 +00:00