re-using a hardware propritary transfer descriptor, PTD, in USB host
mode. If the PTD's are recycled too quickly, it has been observed that
the hardware simply fails to schedule the requested job or resets
completely disconnecting all devices.
SAF1761 OTG driver. Currently the driver logic is very simple and
double buffering the USB transactions is not done. Also you need to
use an external USB high speed USB HUB for reliable FULL speed
outgoing ISOCHRONOUS traffic, because the internal one chokes on
so-called split transfers above 188 bytes.
search (i.e. without returning any result) and you would end up with a
random MAC address.
Change the search algorithm to a recursive one to ensure that all the nodes
on DTS will be verified.
The previous algorithm could not keep up if the DTS has too many sub-nodes.
While here, fix the punctuation on comments.
the r241987 commit message, instead of having users locally overriding
the value using tunables in /boot/loader.conf .
Found by: Adam Parco
Discussed with: Nick Hibma
E5372 with different product IDs.
Interestingly, the standard E5372 IDs (12d1:1506) are currently listed in
u3g.c and are the same as the E3131. However, the R215/E5372 is an NCM
device and works well with cdce(4) whereas the E3131 isn't. More work
may be needed to better identify the other device IDs.
MFC after: 1 week
ports. The current bitmap array was too small to hold more than 16
bits and would at some point toggle the context size, which then would
trigger an enumeration fault and cause a fallback to the EHCI
companion controller, if any.
MFC after: 3 days
Huawei. It might appear as if the firmware is allocating memory blocks
according to the USB transfer size and if there is initially a lot of
data, like at the answering machine prompt, it simply dies without any
apparent reason. The simple workaround for this is to force a zero
length packet at hardware level after every 512 bytes of data. This
will force the other side to use smaller memory blocks aswell.
MFC after: 1 week
- Cleanup some register reads and writes to use existing register
access macros.
- Ensure code which only applies to the control endpoint is not run
for other endpoints in the data transfer path.
MFC after: 3 days
ethernet class.
Note: This is untested as I do not have a device like this. That is
reflected in the MFC timeout.
PR: 192345
Submitted by: rozhuk.im gmail.com
MFC after: 4 weeks
USB 2.0 port mask in addition to the USB 3.0 port mask. The hardware
does not always accept when writing -1U to the port switching
registers.
MFC after: 3 days
Tested by: Huang Wen Hui <huanghwh@gmail.com>
- Remove 4 extra bytes from the ethernet payload.
- The maximum RX buffer was incorrectly set. Increase it to 64K for
now, until the exact limit is understood.
- Enable hardware checksumming again.
- Make hardware data structure packed.
MFC after: 3 days
- Don't discard frames if the dropped or error flag is set.
- Don't remove the last 4-bytes of every packet.
- Add extra range check for data position offset when receiving data.
MFC after: 1 day
PR: 191432
rules prevent the USB serial module to be unloaded before any client
modules. This patch ensures that the "ucom_mtx" mutex is destroyed
last when doing a system uninit in a monotolith build aswell.
MFC after: 3 days
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
shutdown by putting the former under !rebooting and turning the latter into
debug messages.
Reviewed by: hps
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
on USB HUBs by moving the code into the USB explore threads. The
deadlock happens because child devices of the USB HUB don't have the
expected reference count when called from outside the explore
thread. Only the HUB device itself, which the IOCTL interface locks,
gets the correct reference count.
MFC after: 3 days
- Revert r265427. It appears we are halting the DWC OTG host
controller schedule if we process events only at every SOF. When doing
split transactions we rely on that events are processed quickly and
waiting too long might cause data loss.
- We are not always able to meet the timing requirements of interrupt
endpoint split transactions. Switch from INTERRUPT to CONTROL endpoint
type for interrupt endpoint events until further, hence CONTROL
endpoint events are more relaxed, reducing the chance of data
loss. See comment in code for more in-depth explanation.
- Simplify TT scheduling.
MFC after: 3 days
- Remove double buffering interrupt and isochronous traffic via the
transaction translator. It can be avoided because the DWC OTG will
always delay the start split transactions for interrupt and
isochronous traffic, but will not delay the complete split
transactions, if we set the odd frame bit correctly.
- Need to check the transfer cache field in the device done function
to be sure all allocated channels are freed and not the transfer first
one. This seems to resolve the control endpoint transfer type quirk
which is now removed.
- Make sure any received data upon TX is dumped else RX path will
stop.
- Transmit isochronous data before receiving isochronous data as a
means to optimise the TT schedule.
- Implement a simple TT bandwidth scheduler.
- Cleanup use of old "td->error" variable.
- On interrupt IN traffic via the transaction translator we simply
ignore missed transfer opportunities and silently retry the
transaction upon next available time slot.
MFC after: 3 days
- Properly align temporary buffer to 32-bit.
- Add an extra parenthesis to make expression clear.
- Range check the association ID received from hardware.
MFC after: 1 week
- The R92S_TCR register is an 8-bit register. Don't access it like a
16-bit register.
- Disable parsing the delete station event, due to many false events.
- Ensure that there is only one transfer queue for each endpoint, so
that packets transmitted don't get out of order.
MFC after: 1 week
