If the file system backing a process' cwd is removed, and procstat -f PID
is called, then these messages would have been printed. The extra verbosity is
not required in this situation.
Requested by: kib
Approved by: kib
revealed that a process' current working directory can be VBAD if the
directory is removed. This can trigger a panic when procstat -f PID is
run.
Tested by: pho
Discovered by: phobot
Reviewed by: kib
Approved by: kib
from the parent to the child process if they have an operation vector
of &badfileops. This narrows a set of races involving system calls that
allocate a new file descriptor, potentially block for some extended
period, and then return the file descriptor, when invoked by a threaded
program that concurrently invokes fork(2). Similar approches are used
in both Solaris and Linux, and the wideness of this race was introduced
in FreeBSD when we moved to a more optimistic implementation of
accept(2) in order to simplify locking.
A small race necessarily remains because the fork(2) might occur after
the finit() in accept(2) but before the system call has returned, but
that appears unavoidable using current APIs. However, this race is
vastly narrower.
The fix can be validated using the newfileops_on_fork regression test.
PR: kern/130348
Reported by: Ivan Shcheklein <shcheklein at gmail dot com>
Reviewed by: jhb, kib
MFC after: 1 week
This changes struct kinfo_filedesc and kinfo_vmentry such that they are
same on both 32 and 64 bit platforms like i386/amd64 and won't require
sysctl wrapping.
Two new OIDs are assigned. The old ones are available under
COMPAT_FREEBSD7 - but it isn't that simple. The superceded interface
was never actually released on 7.x.
The other main change is to pack the data passed to userland via the
sysctl. kf_structsize and kve_structsize are reduced for the copyout.
If you have a process with 100,000+ sockets open, the unpacked records
require a 132MB+ copyout. With packing, it is "only" ~35MB. (Still
seriously unpleasant, but not quite as devastating). A similar problem
exists for the vmentry structure - have lots and lots of shared libraries
and small mmaps and its copyout gets expensive too.
My immediate problem is valgrind. It traditionally achieves this
functionality by parsing procfs output, in a packed format. Secondly, when
tracing 32 bit binaries on amd64 under valgrind, it uses a cross compiled
32 bit binary which ran directly into the differing data structures in 32
vs 64 bit mode. (valgrind uses this to track file descriptor operations
and this therefore affected every single 32 bit binary)
I've added two utility functions to libutil to unpack the structures into
a fixed record length and to make it a little more convenient to use.
vnode in question does not need to be held. All the data structures used
during the name lookup are protected by the global name cache lock.
Instead, the caller merely needs to ensure a reference is held on the
vnode (such as vhold()) to keep it from being freed.
In the case of procfs' <pid>/file entry, grab the process lock while we
gain a new reference (via vhold()) on p_textvp to fully close races with
execve(2).
For the kern.proc.vmmap sysctl handler, use a shared vnode lock around
the call to VOP_GETATTR() rather than an exclusive lock.
MFC after: 1 month
chdir(), chroot(), eaccess(), fpathconf(), fstat(), fstatfs(), lseek()
(when figuring out the current size of the file in the SEEK_END case),
pathconf(), readlink(), and statfs() system calls.
Submitted by: ups (mostly)
Tested by: pho
MFC after: 1 month
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
There is no reason the fdopen() routine needs Giant. It only sets
curthread->td_dupfd, based on the device unit number of the cdev.
I guess we won't get massive performance improvements here, but still, I
assume we eventually want to get rid of Giant.
semaphores. Specifically, semaphores are now represented as new file
descriptor type that is set to close on exec. This removes the need for
all of the manual process reference counting (and fork, exec, and exit
event handlers) as the normal file descriptor operations handle all of
that for us nicely. It is also suggested as one possible implementation
in the spec and at least one other OS (OS X) uses this approach.
Some bugs that were fixed as a result include:
- References to a named semaphore whose name is removed still work after
the sem_unlink() operation. Prior to this patch, if a semaphore's name
was removed, valid handles from sem_open() would get EINVAL errors from
sem_getvalue(), sem_post(), etc. This fixes that.
- Unnamed semaphores created with sem_init() were not cleaned up when a
process exited or exec'd. They were only cleaned up if the process
did an explicit sem_destroy(). This could result in a leak of semaphore
objects that could never be cleaned up.
- On the other hand, if another process guessed the id (kernel pointer to
'struct ksem' of an unnamed semaphore (created via sem_init)) and had
write access to the semaphore based on UID/GID checks, then that other
process could manipulate the semaphore via sem_destroy(), sem_post(),
sem_wait(), etc.
- As part of the permission check (UID/GID), the umask of the proces
creating the semaphore was not honored. Thus if your umask denied group
read/write access but the explicit mode in the sem_init() call allowed
it, the semaphore would be readable/writable by other users in the
same group, for example. This includes access via the previous bug.
- If the module refused to unload because there were active semaphores,
then it might have deregistered one or more of the semaphore system
calls before it noticed that there was a problem. I'm not sure if
this actually happened as the order that modules are discovered by the
kernel linker depends on how the actual .ko file is linked. One can
make the order deterministic by using a single module with a mod_event
handler that explicitly registers syscalls (and deregisters during
unload after any checks). This also fixes a race where even if the
sem_module unloaded first it would have destroyed locks that the
syscalls might be trying to access if they are still executing when
they are unloaded.
XXX: By the way, deregistering system calls doesn't do any blocking
to drain any threads from the calls.
- Some minor fixes to errno values on error. For example, sem_init()
isn't documented to return ENFILE or EMFILE if we run out of semaphores
the way that sem_open() can. Instead, it should return ENOSPC in that
case.
Other changes:
- Kernel semaphores now use a hash table to manage the namespace of
named semaphores nearly in a similar fashion to the POSIX shared memory
object file descriptors. Kernel semaphores can now also have names
longer than 14 chars (up to MAXPATHLEN) and can include subdirectories
in their pathname.
- The UID/GID permission checks for access to a named semaphore are now
done via vaccess() rather than a home-rolled set of checks.
- Now that kernel semaphores have an associated file object, the various
MAC checks for POSIX semaphores accept both a file credential and an
active credential. There is also a new posixsem_check_stat() since it
is possible to fstat() a semaphore file descriptor.
- A small set of regression tests (using the ksem API directly) is present
in src/tools/regression/posixsem.
Reported by: kris (1)
Tested by: kris
Reviewed by: rwatson (lightly)
MFC after: 1 month
Right now we perform some of the checks inside the fcntl()'s F_DUPFD
operation twice. We first validate the `fd' argument. When finished,
we validate the `arg' argument. These checks are also performed inside
do_dup().
The reason we need to do this, is because fcntl() should return different
errno's when the `arg' argument is out of bounds (EINVAL instead of
EBADF). To prevent the redundant locking of the PROC_LOCK and
FILEDESC_SLOCK, patch do_dup() to support the error semantics required
by fcntl().
Approved by: philip (mentor)
refcount interface.
It also introduces the correct usage of memory barriers, as sometimes
fdrop() and fhold() are used with shared locks, which don't use any
release barrier.
The patch does not change the cdevsw KBI. Management of the data is
provided by the functions
int devfs_set_cdevpriv(void *priv, cdevpriv_dtr_t dtr);
int devfs_get_cdevpriv(void **datap);
void devfs_clear_cdevpriv(void);
All of the functions are supposed to be called from the cdevsw method
contexts.
- devfs_set_cdevpriv assigns the priv as private data for the file
descriptor which is used to initiate currently performed driver
operation. dtr is the function that will be called when either the
last refernce to the file goes away, the device is destroyed or
devfs_clear_cdevpriv is called.
- devfs_get_cdevpriv is the obvious accessor.
- devfs_clear_cdevpriv allows to clear the private data for the still
open file.
Implementation keeps the driver-supplied pointers in the struct
cdev_privdata, that is referenced both from the struct file and struct
cdev, and cannot outlive any of the referee.
Man pages will be provided after the KPI stabilizes.
Reviewed by: jhb
Useful suggestions from: jeff, antoine
Debugging help and tested by: pho
MFC after: 1 month
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.
Highlights include:
* Thread-safe kernel RPC client - many threads can use the same RPC
client handle safely with replies being de-multiplexed at the socket
upcall (typically driven directly by the NIC interrupt) and handed
off to whichever thread matches the reply. For UDP sockets, many RPC
clients can share the same socket. This allows the use of a single
privileged UDP port number to talk to an arbitrary number of remote
hosts.
* Single-threaded kernel RPC server. Adding support for multi-threaded
server would be relatively straightforward and would follow
approximately the Solaris KPI. A single thread should be sufficient
for the NLM since it should rarely block in normal operation.
* Kernel mode NLM server supporting cancel requests and granted
callbacks. I've tested the NLM server reasonably extensively - it
passes both my own tests and the NFS Connectathon locking tests
running on Solaris, Mac OS X and Ubuntu Linux.
* Userland NLM client supported. While the NLM server doesn't have
support for the local NFS client's locking needs, it does have to
field async replies and granted callbacks from remote NLMs that the
local client has contacted. We relay these replies to the userland
rpc.lockd over a local domain RPC socket.
* Robust deadlock detection for the local lock manager. In particular
it will detect deadlocks caused by a lock request that covers more
than one blocking request. As required by the NLM protocol, all
deadlock detection happens synchronously - a user is guaranteed that
if a lock request isn't rejected immediately, the lock will
eventually be granted. The old system allowed for a 'deferred
deadlock' condition where a blocked lock request could wake up and
find that some other deadlock-causing lock owner had beaten them to
the lock.
* Since both local and remote locks are managed by the same kernel
locking code, local and remote processes can safely use file locks
for mutual exclusion. Local processes have no fairness advantage
compared to remote processes when contending to lock a region that
has just been unlocked - the local lock manager enforces a strict
first-come first-served model for both local and remote lockers.
Sponsored by: Isilon Systems
PR: 95247 107555 115524 116679
MFC after: 2 weeks
maxsockets limit, not maxfiles limit. The question remains why those
limits are handled differently (with error code for maxfiles but with
sleep for maxsokets), but those would be addressed in a separate commit
if necessary.
Requested by: rwhatson, jeff
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
Otherwise the parameter is no-op, since zone by default limits number
of descriptors to some 12K entries. Attempt to allocate more ends up
sleeping on zonelimit.
MFC after: 2 weeks
Solaris and AIX.
fcntl(fd, F_DUP2FD, arg) and dup2(fd, arg) are functionnaly equivalent.
Document it.
Add some regression tests (identical to the dup2(2) regression tests).
PR: 120233
Submitted by: Jukka Ukkonen
Approved by: rwaston (mentor)
MFC after: 1 month
consists of the null-terminated name and the contents of any structure
you wish to record. A new ktrstruct() function constructs and emits a
KTR_STRUCT record. It is accompanied by convenience macros for struct
stat and struct sockaddr.
In kdump(1), KTR_STRUCT records are handled by a dispatcher function
that runs stringent sanity checks on its contents before handing it
over to individual decoding funtions for each type of structure.
Currently supported structures are struct stat and struct sockaddr for
the AF_INET, AF_INET6 and AF_UNIX families; support for AF_APPLETALK
and AF_IPX is present but disabled, as I am unable to test it properly.
Since 's' was already taken, the letter 't' is used by ktrace(1) to
enable KTR_STRUCT trace points, and in kdump(1) to enable their
decoding.
Derived from patches by Andrew Li <andrew2.li@citi.com>.
PR: kern/117836
MFC after: 3 weeks
directory, and jail directory within procstat. While this functionality
is available already in fstat, encapsulating it in the kern.proc.filedesc
sysctl makes it accessible without using kvm and thus without needing
elevated permissions.
The new procstat output looks like:
PID COMM FD T V FLAGS REF OFFSET PRO NAME
76792 tcsh cwd v d -------- - - - /usr/src
76792 tcsh root v d -------- - - - /
76792 tcsh 15 v c rw------ 16 9130 - -
76792 tcsh 16 v c rw------ 16 9130 - -
76792 tcsh 17 v c rw------ 16 9130 - -
76792 tcsh 18 v c rw------ 16 9130 - -
76792 tcsh 19 v c rw------ 16 9130 - -
I am also bumping __FreeBSD_version for this as this new feature will be
used in at least one port.
Reviewed by: rwatson
Approved by: rwatson
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
This makes it possible to support ftruncate() on non-vnode file types in
the future.
- 'struct fileops' grows a 'fo_truncate' method to handle an ftruncate() on
a given file descriptor.
- ftruncate() moves to kern/sys_generic.c and now just fetches a file
object and invokes fo_truncate().
- The vnode-specific portions of ftruncate() move to vn_truncate() in
vfs_vnops.c which implements fo_truncate() for vnode file types.
- Non-vnode file types return EINVAL in their fo_truncate() method.
Submitted by: rwatson
happen if there are no files open. Accounting for these can
eventually return a negative value for olenp causing sysctl to
crash with a bad malloc.
Reported by: Pawel Worach <pawel.worach@gmail.com>
- Introduce a finit() which is used to initailize the fields of struct file
in such a way that the ops vector is only valid after the data, type,
and flags are valid.
- Protect f_flag and f_count with atomic operations.
- Remove the global list of all files and associated accounting.
- Rewrite the unp garbage collection such that it no longer requires
the global list of all files and instead uses a list of all unp sockets.
- Mark sockets in the accept queue so we don't incorrectly gc them.
Tested by: kris, pho
its -f and -v arguments:
kern.proc.filedesc - dump file descriptor information for a process, if
debugging is permitted, including socket addresses, open flags, file
offsets, file paths, etc.
kern.proc.vmmap - dump virtual memory mapping information for a process,
if debugging is permitted, including layout and information on
underlying objects, such as the type of object and path.
These provide a superset of the information historically available
through the now-deprecated procfs(4), and are intended to be exported
in an ABI-robust form.
previously conditionally acquired Giant based on debug.mpsafenet. As that
has now been removed, they are no longer required. Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.
While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option. Clean up some related gotos for
consistency.
Reviewed by: bz, csjp
Tested by: kris
Approved by: re (kensmith)
can acquire shared filedescriptor locks in the appropriate cases.
- Remove Giant from calls that issue ioctls. The ioctl path has been
mpsafe for some time now.
- Only acquire giant for VOP_ADVLOCK when the filesystem requires giant.
advlock is now mpsafe.
Reviewed by: rwatson
Approved by: re
a privilege is checked against the real uid rather than the effective
uid, instead decide which uid to use in priv_check_cred() based on the
privilege passed in. We use the real uid for PRIV_MAXFILES,
PRIV_MAXPROC, and PRIV_PROC_LIMIT. Remove the definition of
SUSER_RUID; there are now no flags defined for priv_check_cred().
Obtained from: TrustedBSD Project
Change the VOP_OPEN(), vn_open() vnode operation and d_fdopen() cdev operation
argument from being file descriptor index into the pointer to struct file.
Proposed and reviewed by: jhb
Reviewed by: daichi (unionfs)
Approved by: re (kensmith)
as UF_OPENING. Disable closing of that entries. This should fix the crashes
caused by devfs_open() (and fifo_open()) dereferencing struct file * by
index, while the filedescriptor is closed by parallel thread.
Idea by: tegge
Reviewed by: tegge (previous version of patch)
Tested by: Peter Holm
Approved by: re (kensmith)
MFC after: 3 weeks
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
- Remove also "MP SAFE" after prior "MPSAFE" pass. (suggested by bde)
- Remove extra blank lines in some cases.
- Add extra blank lines in some cases.
- Remove no-op comments consisting solely of the function name, the word
"syscall", or the system call name.
- Add punctuation.
- Re-wrap some comments.
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
sysctl and socket teardown by adding a reference count to the UNIX domain
pcb object and fixing the sysctl that enumerates unpcbs to grab a
reference on each unpcb while it builds the list to copy out to userland.
- Close a race between UNIX domain pcb garbage collection (unp_gc()) and
file descriptor teardown (fdrop()) by adding a new garbage collection
flag FWAIT. unp_gc() sets FWAIT while it walks the message buffers
in a UNIX domain socket looking for nested file descriptor references
and clears the flag when it is finished. fdrop() checks to see if the
flag is set on a file descriptor whose refcount just dropped to 0 and
waits for unp_gc() to clear the flag before completely destroying the
file descriptor.
MFC after: 1 week
Reviewed by: rwatson
Submitted by: ups
Hopefully makes the panics go away: mx1
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
