mbuf lists.
This function is currently trivial, but will that will change when
support for building NFS messages in ext_pgs mbufs is added.
Adding support for ext_pgs mbufs is needed for KERN_TLS, which will
be used to implement nfs-over-tls.
This calculate the offset of the end of the member in the given struct.
Needed by DRM in Linux v5.3
Sponsored-by: The FreeBSD Foudation
Differential Revision: https://reviews.freebsd.org/D24849
Same as mutex_init, the lock_class_key argument seems to be only used for
debug in Linux, simply ignore it for now.
Needed by DRM in Linux v5.3
Sponsored-by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24848
This function decrement the counter and if the result is 0 it acquires
the mutex and returns 1, if not it simply returns 0.
Needed by DRM from Linux v5.3
Sponsored-by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24847
Currently NH_IS_VALID() simly aliases to RT_LINK_IS_UP(), so we're
checking the same thing twice.
In the near future the implementation of this check will be simpler,
as there are plans to introduce control-plane interface status monitoring
similar to ipfw interface tracker.
This restriction already present in case of indirect mapping, do the same
in case of extents.
PR: 246182
Reported by: Teran McKinney
MFC after: 2 weeks
Make ext2fs compatible with changes introduced in e2fsprogs v1.45.2.
Now the tail of inode bitmap is filled with 0xff pattern explicitly during
bitmap initialization phase to avoid e2fsck error like:
"Padding at end of inode bitmap is not set."
My preivous logic was a bit wrong. This caused transmissions that failed due
to a mix of short and long retries to count intermediate rates as OK if the
LONG retry count indicated some retries had made it to this intermediate rate,
but the SHORT retry count was the one that caused the whole transmit to fail.
Now status is passed in again - and this is the status for the whole transmission -
and then update_stats() does some quick math to see if the current transmission
series hit its long retry count or not before updating things as a success
or failure.
Fix another collateral damage of r357614: netisr is initialised way before
malloc() is available hence it can't use sysctl_handle_string() that
allocates temporary buffer. Handle that internally in
sysctl_netisr_dispatch_policy().
PR: 246114
Reported by: delphij
Reviewed by: kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D24858
into account and remove the requirement that the MCS rate is "higher" if we're
considering a new rate.
Ok, another fun one.
* In order for reliable non-software retried higher MCS rates, the TX schedules
(inconsistently!) use hard-coded lower rates at the end of the schedule.
Now, hard-coded is a problem because (a) it means that aggregate formation
is limited by the SLOWEST rate, so I never formed large AMDU frames for
3 stream rates, and (b) if the AP disables lower rates as base rates, it
complains about "unknown rix" every frame you transmit at that rate.
So, for now just disable the third and fourth schedule entry for AMPDUs.
Now I'm forming 32k and 64k aggregates for the higher density MCS rates
much more reliably.
It would be much nicer if the rate schedule stuff wasn't fixed but instead
I'd just populate ath_rc_series[] when I fetch the rates. This is all a
holdover of ye olde pre-11n stuff and I really just need to nuke it.
But for now, ye hack.
* The check for "is this MCS rate better" based on MCS itself is just garbage.
It meant things like going MCS0->7 would be fine, and say 0->8->16 is fine,
(as they're equivalent encoding but 1,2,3 spatial streams), BUT it meant
going something like MCS7->11 would fail even though it's likely that
MCS11 would just be better, both for EWMA/BER and throughput.
So for now just use the average tx time. The "right" way for this comparison
would be to compare PHY bitrates rather than MCS / rate indexes, but I'm not
yet there. The bit rates ARE available in the PHY index, but honestly
I have a lot of other cleaning up to here before I think about that.
* Don't include the RTS/CTS retry count (and thus time) into the average tx time
caluation. It just makes temporarily failures make the rate look bad by
QUITE A LOT, as RTS/CTS exchanges are (a) long, and (b) mostly irrelevant
to the actual rate being tried. If we keep hitting RTS/CTS failures then
there's something ELSE wrong on the channel, not our selected rate.
- thr_kill(2) and thr_exit(2) generally (no argument auditing here.
- A set of syscalls for the process descriptor family, specifically:
pdfork(2), pdgetpid(2) and pdkill(2)
For these syscalls, audit the file descriptor. In the case of pdfork(2)
a pointer to an integer (file descriptor) is passed in as an argument.
We audit the post initialized file descriptor (not the random garbage
that would have been passed in). We will also audit the child process
which was created from the fork operation (similar to what is done for
the fork(2) syscall).
pdkill(2) we audit the signal value and fd, and finally pdgetpid(2)
just the file descriptor:
- Following is a sample of the produced audit trails:
header,111,11,pdfork(2),0,Sat May 16 03:07:50 2020, + 394 msec
argument,0,0x39d,child PID
argument,2,0x2,flags
argument,1,0x8,fd
subject,root,root,0,root,0,924,0,0,0.0.0.0
return,success,925
header,79,11,pdgetpid(2),0,Sat May 16 03:07:50 2020, + 394 msec
argument,1,0x8,fd
subject,root,root,0,root,0,924,0,0,0.0.0.0
return,success,0
trailer,79
header,135,11,pdkill(2),0,Sat May 16 03:07:50 2020, + 395 msec
argument,1,0x8,fd
argument,2,0xf,signal
process_ex,root,root,0,root,0,925,0,0,0.0.0.0
subject,root,root,0,root,0,924,0,0,0.0.0.0
return,success,0
trailer,135
MFC after: 1 week
The most likely users of the QORIQ64 config nowadays are users of AmigaOne
X5000 systems, which are desktops. They need a framebuffer and
keyboard/mouse, so add these to the config so it works by default once
drm-current-kmod is installed.
The CU-SeeMe videoconferencing client and associated protocol is at this
point a historical artifact; there is no need to retain support for this
protocol today.
Reviewed by: philip, markj, allanjude
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24790
* Fix formatting, cause reasons;
* Put back the "and the chosen rate is within 90% of the current rate" logic;
* Ensure the best rate and the current rate aren't the same; this ...
* ... fixes the packets_since_switch[] tracking to actually conut how many
frames since the rate switched, so now I know how stable stuff is; and
* Ensure that MCS can go up to a higher MCS at this or any other spatial stream.
My previous quick hack attempt was doing > rather than >= so you had to go
to both a higher root MCS rate (0..7) and spatial stream. Eg, you couldn't
go from MCS0 (1ss) to MCS8 (2ss) this way.
The best rate and switching rate logic still have a bunch more work to do
because they're still quite touchy when it comes to average tx time but at least
now it's choosing higher rates correctly when it wants to try a higher rate.
Tested:
* AR9380, STA mode
Some laptops don't send ACPI "lid status changed" notifications upon
opening the lid if the system was currently suspended. In r358219
this was partially fixed, updating the "lid_status" variable upon
resume even if there is no "status changed" notification from ACPI.
Unfortunately the fix in r358219 did not include notifying userland
via devd; this causes problems on systems using upowerd (e.g. KDE),
since upowerd remembers the most recent devd notification about the
lid status rather than querying the sysctl to get the current status.
This showed up as two symptoms when KDE's "When laptop lid closed: Sleep"
option is set:
1. 50% of the time, closing the lid would not trigger S3 sleep.
2. 50% of the time, plugging/unplugging AC power would trigger S3 sleep.
PR: 246477
MFC after: 3 days
Right now we optionally allocate 8 counters per table entry, so in
addition to memory consumed by counters, we require 8 pointers worth of
space in each entry even when counters are not allocated (the default).
Instead, define a UMA zone that returns contiguous per-CPU counter
arrays for use in table entries. On amd64 this reduces sizeof(struct
pfr_kentry) from 216 to 160. The smaller size also results in better
slab efficiency, so memory usage for large tables is reduced by about
28%.
Reviewed by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24843
My initial rate control code was .. suboptimal. I wanted to at least get MCS
rates sent, but it didn't do anywhere near enough to handle low signal level links
or remotely keep accurate statistics.
So, 8 years later, here's what I should've done back then.
* Firstly, I wasn't at all tracking packet sizes other than the two buckets
(250 and 1600 bytes.) So, extend it to include 4096, 8192, 16384, 32768 and
65536. I may go add 2048 at some point if I find it's useful.
This is important for a few reasons. First, when forming A-MPDU or AMSDU
aggregates the frame sizes are larger, and thus the TX time calculation
is woefully, increasingly wrong. Secondly, the behaviour of 802.11 channels
isn't some fixed thing, both due to channel conditions and radios themselves.
Notably, there was some observations done a few years ago on 11n chipsets
which noticed longer aggregates showed an increase in failed A-MPDU sub-frame
reception as you got further along in the transmit time. It could be due to
a variety of things - transmitter linearity, channel conditions changing,
frequency/phase drift, etc - but the observation was to potentially form
shorter aggregates to improve BER.
* .. and then modify the ath TX path to report the length of the aggregate sent,
so as the statistics kept would line up with the correct bucket.
* Then on the rate control look-up side - i was also only using the first frame
length for an A-MPDU rate control lookup which isn't good enough here.
So, add a new method that walks the TID software queue for that node to
find out what the likely length of data available is. It isn't ALL of the
data in the queue because we'll only ever send enough data to fit inside the
block-ack window, so limit how many bytes we return to roughly what ath_tx_form_aggr()
would do.
* .. and cache that in the first ath_buf in the aggregate so it and the eventual
AMPDU length can be returned to the rate control code.
* THEN, modify the rate control code to look at them both when deciding which bucket
to attribute the sent frame on. I'm erring on the side of caution and using the
size bucket that the lookup is based on.
Ok, so now the rate lookups and statistics are "more correct". However, MCS rates
are not the same as 11abg rates in that they're not a monotonically incrementing
set of faster rates and you can't assume that just because a given MCS rate fails,
the next higher one wouldn't work better or be a lower average tx time.
So, I had to do a bunch of surgery to the best rate and sample rate math.
This is the bit that's a WIP.
* First, simplify the statistics updates (update_stats()) to do a single pass on
all rates.
* Next, make sure that each rate average tx time is updated based on /its/ failure/success.
Eg if you sent a frame with { MCS15, MCS12, MCS8 } and MCS8 succeeded, MCS15 and MCS
12 would have their average tx time updated for /their/ part of the transmission,
not the whole transmission.
* Next, EWMA wasn't being fully calculated based on the /failures/ in each of the
rate attempts. So, if MCS15, MCS12 failed above but MCS8 didn't, then ensure
that the statistics noted that /all/ subframes failed at those rates, rather than
the eventual set of transmitted/sent frames. This ensures the EWMA /and/ average
TX time are updated correctly.
* When picking a sample rate and initial rate, probe rates aroud the current MCS
but limit it to MCS0..7 /for all spatial streams/, rather than doing crazy things
like hitting MCS7 and then probing MCS8 - MCS8 is basically MCS0 but two spatial
streams. It's a /lot/ slower than MCS7. Also, the reverse is true - if we're at
MCS8 then don't probe MCS7 as part of it, it's not likely to succeed.
* Fix bugs in pick_best_rate() where I was /immediately/ choosing the highest MCS
rate if there weren't any frames yet transmitted. I was defaulting to 25% EWMA and
.. then each comparison would accept the higher rate. Just skip those; sampling
will fill in the details.
So, this seems to work a lot better. It's not perfect; I'm still seeing a lot of
instability around higher MCS rates because there are bursts of loss/retransmissions
that aren't /too/ bad. But i'll keep iterating over this and tidying up my hacks.
Ok, so why this still something I'm poking at? rather than porting minstrel_ht?
ath_rate_sample tries to minimise airtime, not maximise throughput. I have
extended it with an EWMA based on sub-frame success/failures - high MCS rates
that have partially successful receptions still show super short average frame
times, but a /lot/ of retransmits have to happen for that to work.
So for MCS rates I also track this EWMA and ensure that the rates I'm choosing
don't have super crappy packet failures. I don't mind not getting lower
peak throughput versus minstrel_ht; instead I want to see if I can make "minimise
airtime" work well.
Tested:
* AR9380, STA mode
* AR9344, STA mode
* AR9580, STA/AP mode
Expose the special kernel LAPIC, IOAPIC, and HPET devices to userspace
for use in, e.g., fallback instruction emulation (when userspace has a
newer instruction decode/emulation layer than the kernel vmm(4)).
Plumb the ioctl through libvmmapi and register the memory ranges in
bhyve(8).
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24525
This problem was found by looking at syzkaller reproducers for some other
problems.
Reviewed by: rrs
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24831
help of Michael Tuexen. There was some accounting
errors with TCPFO for bbr and also for both rack
and bbr there was a FO case where we should be
jumping to the just_return_nolock label to
exit instead of returning 0. This of course
caused no timer to be running and thus the
stuck sessions.
Reported by: Michael Tuexen and Skyzaller
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D24852
This fixes a race where concurrent calls to doenterpgrp() and
leavepgrp() while TIOCSCTTY is executing may result in tp->t_pgrp
changing value so that tty_rel_pgrp() misses clearing it to NULL. For
more details refer to the use of pgdelete() in the kernel.
No functional change intended.
Panic backtrace:
__mtx_lock_sleep() # page fault due to using destroyed mutex
tty_signal_pgrp()
tty_ioctl()
ptsdev_ioctl()
kern_ioctl()
sys_ioctl()
amd64_syscall()
MFC after: 1 week
Sponsored by: Mellanox Technologies
In recent Linux (5.3+) and OpenBSD (6.6+) kernels, and with hosts that
support CPUID 0x15, the local APIC frequency is determined directly
from the reported crystal clock to avoid calibration against the 8254
timer.
However, the local APIC frequency implemented by bhyve is 128MHz, where
most h/w systems report frequencies around 25MHz. This shows up on
OpenBSD guests as repeated keystrokes on the emulated PS2 keyboard
when using VNC, since the kernel's timers are now much shorter.
Fix by reporting all-zeroes for CPUID 0x15. This allows guests to fall
back to using the 8254 to calibrate the local APIC frequency.
Future work could be to compute values returned for 0x15 that would
match the host TSC and bhyve local APIC frequency, though all dependencies
on this would need to be examined (for example, Linux will start using
0x16 for some hosts).
PR: 246321
Reported by: Jason Tubnor (and tested)
Reviewed by: jhb
Approved by: jhb, bz (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24837
Reorder flag manipulations and use barrier to ensure that the program
order is followed by compiler and CPU, for unlocked reader of so_state.
In collaboration with: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24842
Sometimes, when doing read(2) over unix domain socket, for which the
other side socket was closed, read(2) returns -1/ENOTCONN instead of
EOF AKA zero-size read. This is because soreceive_generic() does not
lock socket when testing the so_state SS_ISCONNECTED|SS_ISCONNECTING
flags. It could end up that we do not observe so->so_rcv.sb_state bit
SBS_CANTRCVMORE, and then miss SS_ flags.
Change the test to check that the socket was never connected before
returning ENOTCONN, by adding all state bits for connected.
Reported and tested by: pho
In collaboration with: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24819
This function is responsible for setting pc_domain in each pcpu
structure. Call it from the main function that starts APs, rather than
a separate SYSINIT. This makes it easier to close the window where
UMA's per-CPU slab allocator may be called while pc_domain is
uninitialized. In particular, the allocator uses pc_domain to allocate
domain-local pages, so allocations before this point end up using domain
0 for everything.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24757
Otherwise anything counted before SI_SUB_VM_CONF is discarded. However,
it is useful to be able to see stats from allocations done early during
boot.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24756
Extattr names are allowed to be 255 bytes -- not 254 bytes plus trailing
NUL. Provide a 256 buffer so that copyinstr() has room for the trailing
NUL.
Re-enable test for maximal name lengths.
PR: 208965
Reported by: asomers
Reviewed by: asomers
Differential Revision: https://reviews.freebsd.org/D24584
The alias needs to be part of the provider instead of the geom to work
properly. To bind the DEV geom, we need to look at the provider's names and
aliases and create the dev entries from there. If this lives in the GEOM, then
it won't propigate down the tree properly. Remove it from geom, add it provider.
Update geli, gmountver, gnop, gpart, and guzip to use it, which handles the bulk
of the uses in FreeBSD. I think this is all the providers that create a new name
based on their parent's name.
