problem by adding -fno-strict-aliasing to CFLAGS. Since this is a global
issue that just happened to manifest on PowerPC, add this to CFLAGS
unconditionally.
MFC after: 1 week
This shows that the majority of the weird traffic I see here are probe
frames that haven't been sent out, but I can also trigger this condition
by doing ICMP w/ -i 0.3 - enough to trigger the TX during actual scanning,
but not fast enough to stop scanning from occuring.
PR: kern/163689
comparing to struct timeval. for clocktime they should be
1..7 and 1..12 respectively
- CAPK-0100ND uses RTC without centruy bit (DS1307) so set it 21st
This version of libcompiler_rt adds support for __mulo[sdt]i4(), which
computes a multiply and its overflow flag. There are also a lot of
cleanup fixes to headers that don't really affect us.
Updating to this revision should make it a bit easier to contribute
changes back to the LLVM developers.
are booting inside a VM. There are three reasons to disable this:
o It causes the VM host to believe that all the tested pages or RAM are
in use. This in turn may force the host to page out pages of RAM
belonging to other VMs, or otherwise cause problems with fair resource
sharing on the VM cluster.
o It adds significant time to the boot process (around 1 second/Gig in
testing)
o It is unnecessary - the host should have already verified that the
memory is functional etc.
Note that this simply changes the default when in a VM - it can still be
overridden using the hw.memtest.tests tunable.
MFC after: 4 weeks
writing label into a file image. The most common use - putting disklabel
into ISO file. Before this change the label would always go to
the offset 512, while geom_part code expects it to be in the 1st
sector (i.e. 2048 incase of ISO). BSD disklabels provide good and
lightweight way to logically split livecds. It is non-intrusive as
far as ISO9660 goes (both boot-wise and metadata-wise) and
completely transparent to anything but BSD, so you can have
BSD-specific area appended after regular ISO.
And with a little bit of GEOM trickery you can do even more
interesting stuff with it.
For example we make "hybrid" bootable CDs using this method.
We create bootable ISO with kernel and such and append UFS
image compressed with UZIP and it works like a charm. We put
label based on the offsef of the BSD part into the ISO. The kernel
boots off normal ISO9660 part, tastes label attaches it,
tastes UZIP, attaches it and finally mounts UFS using GEOM_LABEL.
This provides much better way of eliminating waste than doing
"crunched" build.
MFC after: 1 month
lib/libc/gen/strtofflags.c became const, but gcc did not warn about
assigning its members to non-const pointers. Clang warned about this
with:
lib/libc/gen/strtofflags.c:98:12: error: assigning to 'char *' from 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types]
for (sp = mapping[i].invert ? mapping[i].name :
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed by: jilles
When r207410 eliminated the acquisition and release of the page queues
lock from pmap_extract_and_hold(), it didn't take into account that
pmap_pte_quick() sometimes requires the page queues lock to be held.
This change reimplements pmap_extract_and_hold() such that it no
longer uses pmap_pte_quick(), and thus never requires the page queues
lock.
Merge r177525 from the native pmap
Prevent the overflow in the calculation of the next page directory.
The overflow causes the wraparound with consequent corruption of the
(almost) whole address space mapping.
Strictly speaking, r177525 is not required by the Xen pmap because the
hypervisor steals the uppermost region of the normal kernel address
space. I am nonetheless merging it in order to reduce the number of
unnecessary differences between the native and Xen pmap implementations.
Tested by: sbruno
definition from K&R to ANSI, to avoid a clang warning about the uint8_t
parameter being promoted to int, which is not compatible with the type
declared in the earlier prototype.
MFC after: 1 week
In the original Domain Search option patch, an invalid option value
would cause the whole lease to be rejected. However, DHCP servers who
emit such an invalid value are more common than I thought. With this new
patch, just the option is rejected, not the entire lease.
PR: bin/163431
Submitted by: Fabian Keil <fk@fabiankeil.de> (earlier version)
Reviewed by: Fabian Keil <fk@fabiankeil.de>
Sponsored by: Yakaz (http://www.yakaz.com)
All of these are harmless, and are in fact used to shut up warnings from
lint.
While here, remove -Wno-missing-prototypes from the xfs module
Makefile, as I could not reproduce those warnings either with gcc or
clang.
MFC after: 1 week
This makes a tiny percentage of entries in calendars ugly for latin1
users, but fixes them for UTF-8 users.
This badly needs a solution involving locale-dependent re-encoding.
This is an AR71xx based board with 8MB flash, 64MB RAM, a
Mini-PCI+ slot (see below) and a single 10/100/1000baseT
ethernet port. It also has two USB ports.
This is an easier board than most to add as it doesn't have a
switch PHY on-board. This made it (mostly) trivial to craft a
working configuration.
Things to note:
* This, like most other reference boards, use uboot rather then
redboot. It means that you typically have to manually flash
both the kernel and rootfs partitions.
* Since there's currently no (nice) way to extract out the
ethernet MAC and RAM from the uboot environment, the RAM
will default to 32mb and the MAC will be something very
incorrect. I'll try to fix this up in a subsequent commit
or two, even if it's just some hard-coded nonsense in
ar71xx_machdep.c for now.
* The board is designed for a specific model of mini-PCI+
NIC which never made it into production. Normal mini-PCI
NICs will work fine; if you happen to have the NIC in question
then it will work fine with this board.
aspect of time stamp configuration per interface rather than per BPF
descriptor. Prior to this, the order in which BPF devices were opened and the
per descriptor time stamp configuration settings could cause non-deterministic
and unintended behaviour with respect to time stamping. With the new scheme, a
BPF attached interface's tscfg sysctl entry can be set to "default", "none",
"fast", "normal" or "external". Setting "default" means use the system default
option (set with the net.bpf.tscfg.default sysctl), "none" means do not
generate time stamps for tapped packets, "fast" means generate time stamps for
tapped packets using a hz granularity system clock read, "normal" means
generate time stamps for tapped packets using a full timecounter granularity
system clock read and "external" (currently unimplemented) means use the time
stamp provided with the packet from an underlying source.
- Utilise the recently introduced sysclock_getsnapshot() and
sysclock_snap2bintime() KPIs to ensure the system clock is only read once per
packet, regardless of the number of BPF descriptors and time stamp formats
requested. Use the per BPF attached interface time stamp configuration to
control if sysclock_getsnapshot() is called and whether the system clock read
is fast or normal. The per BPF descriptor time stamp configuration is then
used to control how the system clock snapshot is converted to a bintime by
sysclock_snap2bintime().
- Remove all FAST related BPF descriptor flag variants. Performing a "fast"
read of the system clock is now controlled per BPF attached interface using
the net.bpf.tscfg sysctl tree.
- Update the bpf.4 man page.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
In collaboration with: Julien Ridoux (jridoux at unimelb edu au)
before invoking the kernel.
Quoting submitter:
The issue is with the new boot loader menu. It adds many loader variables
including ones that contain ANSI color escapes.
Obviously, these ANSI codes don't play well with serial consoles when
kenv(1) is executed without arguments (reports vary as to what happens,
but it's never pretty).
The net-effect is that kenv(1) no longer reports menu-related variables.
In essence, kenv(1) output should now appear the same as on RELENG_8
(which lacks the new boot loader and didn't use any such variables).
Thus, restoring serial console glory.
Submitted by: Devin Teske <devin dott teske fisglobal.com>
MFC after: 2 weeks
with clang. There are several macros in these files that return values,
and in some cases nothing is done with them, but it is completely
harmless. For some other files, also disable -Wconstant-conversion,
since that triggers a false positive with the DMA_BIT_MASK() macro.
MFC after: 1 week
The development version of GCC also supports an atomics interface
similar to Clang's. Change the header file to work as follows:
- __CLANG_ATOMICS: Use Clang's new atomics interface,
- __GNUC_ATOMICS: Use GCC's new atomics interface,
- else: fall back to GCC's __sync interface.
