Add cpuctl(4) ioctl CPUCTL_EVAL_CPU_FEATURES which forces re-read of
cpu_features, cpu_features2, cpu_stdext_features, and
std_stdext_features2.
The intent is to allow the kernel to see the changes in the CPU
features after micocode update. Of course, the update is not atomic
across variables and not synchronized with readers. See the man page
warning as well.
Reviewed by: imp (previous version), jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13770
The default 80MHz clock speed returned by bhnd_pmu_si_clock() was already
correct; this just prevents the "No backplane clock specified" warning
printf from being emitted when querying backplane clock speed.
Sponsored by: The FreeBSD Foundation
Enable the hardclock-based watchdog previously conditional on the
SW_WATCHDOG option whenever hardware watchdogs are not found, and
watchdogd attempts to enable the watchdog. The SW_WATCHDOG option
still causes the sofware watchdog to be enabled even if there is a
hardware watchdog. This does not change the other software-based
watchdog enabled by the --softtimeout option to watchdogd.
Note that the code to reprime the watchdog during kernel core dumps is
no longer conditional on SW_WATCHDOG. I think this was previously a bug.
Reviewed by: imp alfred bjk
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13713
Apply the fix from r327499 to additional ioctl handlers.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
MFC after: 1 week
MFC with: r327499
Sponsored by: The FreeBSD Foundation
The ath_btcoex_ioctl handler allocated a buffer without M_ZERO and
returned it to userland without writing to it.
The device has permissions only for root so this is not urgent, and the
fix can be MFCd and considered for a future EN.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Reviewed by: adrian
MFC after: 1 week
The hpt{nr,rr} ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.
Also zero bytesReturned in case it is not written by hpt_do_ioctl().
The hpt27{nr,rr} device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.
The same issue was reported in the hpt27xx driver by Ilja Van Sprundel.
Reviewed by: jhb, kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The hpt27xx ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.
Also zero bytesReturned in case it is not written by hpt_do_ioctl().
The hpt27xx device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com> (M_ZERO)
Reviewed by: jhb, kib
MFC after: 3 days
Security: info leak in root-only ioctl
Sponsored by: The FreeBSD Foundation
This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data. Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.
Tested:
* ath(4), STA and AP mode
TODO:
* yes, this is slightly stack size-y, but it is an important first step
to get drivers migrated over to a sensible WME API. A lot of per-phy things
need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
During review iterations function signature has changed in definition
but not in actual call. Fix call to match the definition.
Reported by: Herbert J. Skuhra
Pointyhat to: gonzo
MFC after: 2 weeks
Introduce new set of loader tunables kern.vt.color.N.rgb, where N is a
number from 0 to 15. The value is either comma-separated list decimal
numbers ranging from 0 to 255 that represent values of red, green, and
blue components respectively (i.e. "128,128,128") or 6-digit hex triplet
commonly used to represent colors in HTML or xterm settings (i.e. #808080)
Each tunable overrides one of the 16 hardcoded palette codes and can be set
in loader.conf(5)
Reviewed by: bcr(docs), jilles, manu, ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13645
Fully subclass the dwmmc driver and split every driver into multiple files.
There is still a few quirks in the dwmmc driver that will need some work.
Tested On: Pine64 Rock64
Differential Revision: https://reviews.freebsd.org/D13615
The ep(4) driver is the only consumer of the two functions from
elink.c. I removed the standalone module as well, and most likely,
the module metadata is not needed anywhere, but this is for later
cleanup.
Discussed with: imp, jhb
Sponsored by: The FreeBSD Foundation
to recover from that, especially when something goes wrong.
- When userland changes EXT_CSD, update the kernel copy before using
relevant EXT_CSD bits in mmcsd_switch_part().
enabled (though, no interrupt generation enabled for them) all the
time as soon as (re-)tuning is supported; only enable them and let
them generate interrupts when actually using (re-)tuning.
- Also disable all interrupts except SDHCI_INT_DATA_AVAIL ones while
executing tuning and not just their signaling.
Resolve a minor mismatch: TXP_CMD_READ_VERSION instead of
TXP_CMD_VERSIONS_READ.
Curiously the later is defined but not used in OpenBSD.
Obtained from: OpenBSD (CVS 1.31-1.34)
MFC after: 1 week
r327106 introduced kobj to syscon so it can be subclassed and fit in with
the rest of the syscon framework. The diff for syscon.c was misapplied in a
clean tree prior to commit, so bring it back to what was included in the
review and tested. The entire file has basically been rewritten from what
was present prior to the kobj work.
Pointy hat to: me
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
This should help reduce confusion between syscon/syscons a little bit.
syscon is a resource generally modeled by FDT platforms, and not to be
confused with syscons.
Allow more flexibility by kobj'ifying syscon and splitting out fdt specific
bits in preparation of a move to the extres framework.
The generic fdt driver has been moved to syscon_generic.c and the fdt
requirement has been removed from the syscon interface, as is common to the
extres framework.
Reviewed by: strejda
Differential Revision: https://reviews.freebsd.org/D13521
ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
about CIS3/CIS4, including studies I've done on my large collection of
PC Cards bought off e-bay over the years since the original entry as
well as conversations I've had at conferences.
leaves the firmware event queue (fwq) as the only queue that can take
interrupts for others.
This simplifies cfg_itype_and_nqueues and queue allocation in the driver
at the cost of a little (never?) used configuration. It also allows
service_iq to be split into two specialized variants in the future.
MFC after: 2 months
Sponsored by: Chelsio Communications
While the BSD-2-Clause license is there, the GPLv2 is also present.
I am unsure of the implications of having both licenses as they are here.
I'll just leave it untagged and open for interpretation.
