it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
POSIX.1-2008 specifies that those two functions should be declared by
including <strings.h>, not <string.h> (the latter only has strcoll_l()
and strxfrm_l()):
http://pubs.opengroup.org/onlinepubs/9699919799/functions/strcasecmp.html
Obtained from: DragonFlyBSD
Reviewed by: theraven
MFC after: 2 weeks
fault on the destination buffer.
Prior to this change a page fault would be detected in vm_copyout(). This
was done after the I/O port access was done. If the I/O port access had
side-effects (e.g. reading the uart FIFO) then restarting the instruction
would result in incorrect behavior.
Fix this by validating the guest linear address before doing the I/O port
emulation. If the validation results in a page fault exception being injected
into the guest then the instruction can now be restarted without any
side-effects.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
of the guest linear address space. These APIs in turn use a new ioctl
'VM_GLA2GPA' to convert the guest linear address to guest physical.
Use the new copyin/copyout APIs when emulating ins/outs instruction in
bhyve(8).
mode. This allows the binder to be functional in the child after the
fork (assuming no lazy loading of a filter is needed), but other rtld
services which require write lock on rtld_bind_lock cause deadlock, if
called by child.
Change the _rtld_atfork() to lock the bind lock in write mode, making
the rtld fully functional after the fork.
Pre-resolve the symbols which are called by the libthr' fork()
interposer, since dynamic resolution causes deadlock due to the
rtld_bind_lock already owned in the write mode.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The CUSE library is a wrapper for the devfs kernel functionality which
is exposed through /dev/cuse . In order to function the CUSE kernel
code must either be enabled in the kernel configuration file or loaded
separately as a module. Currently none of the committed items are
connected to the default builds, except for installing the needed
header files. The CUSE code will be connected to the default world and
kernel builds in a follow-up commit.
The CUSE module was written by Hans Petter Selasky, somewhat inspired
by similar functionality found in FUSE. The CUSE library can be used
for many purposes. Currently CUSE is used when running Linux kernel
drivers in user-space, which need to create a character device node to
communicate with its applications. CUSE has full support for almost
all devfs functionality found in the kernel:
- kevents
- read
- write
- ioctl
- poll
- open
- close
- mmap
- private per file handle data
Requested by several people. Also see "multimedia/cuse4bsd-kmod" in
ports.
vm.max_wired is a system-wide limit, not per-process. Reword the
section to make this more clear.
PR: docs/189214
Submitted by: Lawrence Chen (original text)
Approved by: hrs (mentor)
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
and 3.4 to generate dependency files for the '.inc.h' files generated
from .td files, and .sinclude those dependency files in clang.build.mk.
This will make future incremental builds of lib/clang and usr.bin/clang
work correctly, whenever any of the .td files get modified.
Note that this will not fix any problems with incremental builds from
*before* this revision, since there will not yet be any generated
dependency files. A quick workaround is to run the following:
find /usr/obj -type f -name '*.inc.h' | xargs rm
and then a regular incremental buildworld (e.g. with -DNO_CLEAN).
MFC after: 3 days
This has not added a lot of value when debugging bhyve issues while greatly
increasing the time and space required to store the core file.
Passing the "-C" option to bhyve(8) will change the default and dump guest
memory in the core dump.
Requested by: grehan
Reviewed by: grehan
H_SAVE_FP is similar to H_SAVE but operates on a FILE* instead of a filename.
This is useful when operating in capability mode.
Reviewed by: christos@NetBSD.org, pfg
actual file storing the semaphore object is different from the file
created on the first open. Store the file st_dev and st_ino members
of the struct stat in the semaphore structure on open, and compare
them with the attributes of the opened file to detect unlink and
re-creation.
This fixes an issue of sem_unlink(3) failing to flush the named entry
in the semaphore list for the current or remote process, making
sem_unlink(3) not correctly operating if the unlinked semaphore is
still opened.
Reported by: Joris Giovannangeli <joris@giovannangeli.fr>
PR: standards/189353
Reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
early built libraries. This should be sufficient for most cases and
has eliminated the issues I've seen with high -j builds. Races likely
still remain, but this knocks the problem down a notch.
and MK_LLDB=no, so set those explicitly (now that we can do
that). Simplify tests for these variables as well, since we know they
will always be defined regardless of the phase of the build.
with r265456 _r_debug_postinit can be used for RD_POSTINIT events. rtld(1)
uses r_debug_state for dl state transitions, so we use its address for
RD_DLACTIVITY events.
MFC after: 2 weeks
allowed range or when one or more pages are not mapped. This according to
The Open Group Base Specifications Issue 7.
Discussed with: attilio, Bruce Evans
Reviewed by: alc, Garrett Cooper
Reported by: ATF
MFC after: 2 weeks
Sponsored by: EMC / Isilon storage division
file are always built the same.
(Note that Header and Localstuff must appear first and in that order, the
sorting does not affect as a coincident effect).
Submitted by: sjg
MFC after: 3 days
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Discussed with: grehan@
since they don't have an easily recognizable signature, was if they
were the default. This commit rewrites crypt_set_format(3) etc to
address this:
- Use a pointer instead of an index to identify the default format.
This pointer is initialized at compile time to point to the first
first element in the list of supported formats, eliminating the
need for crypt_setdefault(). Using a pointer also simplifies
iterating through the list.
- Associate DES with the magic string "_", which takes care of the
Extended DES format.
- Finally, as a special case, if the salt does not match any known
magic string but matches ^[./0-9A-Za-z]{13}$, it is assumed to be a
DES password and is passed on to crypt_des().
MFC after: 1 week
