configured swap devices in the Linux-compatible format.
Based on the submission by: Robert Millan <rmh debian org>
PR: kern/159281
Reviewed by: bde
Approved by: re (kensmith)
MFC after: 2 weeks
dynamic memory allocation to hold per-CPU memory types data (sized to
mp_maxid for UMA, and to mp_maxcpus for malloc to match the kernel).
That fixes libmemstat with arbitrary large MAXCPU values and therefore
eliminates MEMSTAT_ERROR_TOOMANYCPUS error type.
Reviewed by: jhb
Approved by: re (kib)
recursive vnode lock on the directory for the case where the
new file name is in the same directory as the old one. The patch
handles this as a special case, recognized by the new directory
having the same file handle as the old one and just VREF()s the old
dir vnode for this case, instead of doing a second VFS_FHTOVP() to get it.
This is required so that the server will work for file systems like
msdosfs, that do not support recursive vnode locking.
This problem was discovered during recent testing by pho@
when exporting an msdosfs file system via the new NFS server.
Tested by: pho
Reviewed by: zkirsch
Approved by: re (kib)
MFC after: 2 weeks
interrupt storm.
This is easily triggered by flipping on and off tcpdump -y IEEE802_11_RADIO
w/ witness enabled. This causes a whole lot of console IO and when you're
attached to a serial console (eg on my AR7161 embedded board), the RX
interrupt doesn't get called quickly enough and the RX queue fills up.
This wasn't a problem in the past because of the self-linked RX descriptor
trick - the RX would never hit the "end" of the RX descriptor list.
However this isn't possible for 802.11n (see previous commit history for
why.)
Both Linux ath9k and the Atheros reference driver code do this; I'm just
looking now for where they then restart the PCU receive. Right now the RX
will just stop until the interface is reset.
Obtained from: Linux, Atheros
Approved by: re (kib)
The AR9280 apparently has an issue with descriptors which straddle a page
boundary (4k). I'm not yet sure whether I should use PAGE_SIZE in the
calculations or whether I should use 4096; the reference code uses 4096.
This patch fiddles with descriptor allocation so a descriptor entry
doesn't straddle a 4kb address boundary. The descriptor memory allocation
is made larger to contain extra descriptors and then the descriptor
address is advanced to the next 4kb boundary where needed.
I've tested this both on Merlin (AR9280) and non-Merlin (in this case,
AR9160.)
Obtained from: Linux, Atheros
Approved by: re (kib)
from NetBSD, with some slight changes:
=========================================================================================
http://cvsweb.netbsd.org/bsdweb.cgi/src/libexec/tftpd/tftpd.8?only_with_tag=MAIN#rev1.22
Revision 1.22 or diffs], Fri Jan 8 21:05:14 2010 UTC (18 months, 2 weeks ago) by christos
Patrick Welche <prlw1@cam.ac.uk>
- add -p pathsep option
- make wrap to zero work, but produce a warning
While here:
- fix gcc warnings, in particular variable clobbered warnings
(compiling with fewer warnings does not really fix the problem)
=========================================================================================
These wording changes clarify the default rollover behavior
as a "kludge". Also, the block numbers and octet counts for 65535 blocks
and 32767 blocks are more accurate than the existing documented numbers.
Requested by: Pawan Gupta <pawang at juniper dot net>
Obtained from: Juniper Networks
Approved by: re (kib)
the block counter would rollover to 0 if a file larger
than 65535 blocks was transferred. With the default block size
of 512 octets per block, this is a file size of approximately 32 megabytes.
The new TFTP server code would report an error and stop transferring
the file if a file was larger than 65535 blocks.
This patch restores the old TFTP server's behavior to the new
TFTP server code. If a TFTP client transfers a file larger
than 65535 blocks, and does *not* specify the "rollover" option,
then automatically rollover the block counter to 0 every time
we reach 65535 blocks.
This restores interoperability with the FreeBSD 6 TFTP client.
Without this change, if a FreeBSD 6 TFTP client tried to
retrieve a file larger than 65535 blocks from a FreeBSD 9 TFTP server
, the transfer would fail.
The same file could be retrieved successfully if the same FreeBSD 6
TFTP client was used against a FreeBSD 6 TFTP server.
Approved by: re (kib)
Tested by: Pawan Gupta <pawang at juniper dot net>,
Obtained from: Juniper Networks
historic behavior (create the default base directory in pw.conf) before
I came up with a better fix for this.
Requested by: nwhitehorn
Approved by: re (kib)
failed after the file was created in nfs_create(). This would
probably only happen during a forced dismount. The old NFS client
does have a vput() for this case. Detected by pho during recent
testing, where an open syscall returned with a vnode still locked.
Tested by: pho
Approved by: re (kib)
MFC after: 2 weeks
This is a followup to r222032 and a reimplementation of it.
While that revision fixed the race for the smp_rv_waiters[2] exit
sentinel, it still left a possibility for a target CPU to access
stale or wrong smp_rv_func_arg in smp_rv_teardown_func.
To fix this race the slave CPUs signal when they are really fully
done with the rendezvous and the master CPU waits until all slaves
are done.
Diagnosed by: kib
Reviewed by: jhb, mlaier, neel
Approved by: re (kib)
MFC after: 2 weeks
in the case of a held dataset during remount.
Detailed description is available at:
https://www.illumos.org/issues/883
illumos-gate revision: 13380:161b964a0e10
Reviewed by: pjd
Approved by: re (kib)
Obtained from: Illumos (Bug #883)
MFC after: 3 days
as anonymous namespaces are local to the current translation.
GCC PR: c++/33094
Reviewed by: uqs
Approved by: re (kib)
Obtained from: gcc (branches/redhat/gcc-4_1-branch, rev. 129554, GPLv2)
MFC after: 1 week
allocated the device pager for the given handle, then the object
fictitious pages list and the object membership in the global object
list still need to be initialized. Otherwise, dev_pager_dealloc() will
traverse uninitialized pointers.
Reported and tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
MFC after: 1 week
This seems to indicate whether to program the NIC for fractional 5ghz
mode (ie, 5mhz spaced channels, rather than 10 or 20mhz spacing) or not.
The default (0) seems to mean "only program fractional mode if needed".
A different value (eg 1) seems to always enable fractional 5ghz mode
regardless of the frequency.
Obtained from: Atheros
Approved by: re (kib)
Calibration/PCI data that's written to flash (rather than EEPROM attached
to the NIC) is typically already in host-endian. The existing checks
end up swapping 16 bit words incorrectly - the correct solution would be
to read the magic value and determine the EEPROM endianness from that.
(This is what Linux does.)
This doesn't completely enable embedded use of the AR9285/AR9287 -
notably, the EEPROM read methods need to be made generic and available
to all EEPROM drivers. I'll worry about that later.
Approved by: re (kib)
* I messed up the order of parameter true/false; oops!
* AR_PHY_RADAR_1 was being written at the wrong place, and was writing
potential garbage to the hardware.
Approved by: re (kib)
memtesting, which can easily save seconds to minutes of boot time.
The tunable name is kept general to allow reusing the code in
alternate frameworks.
Requested by: many
Discussed on: arch (a while a go)
Obtained from: Sandvine Incorporated
Reviewed by: sbruno
Approved by: re (kib)
MFC after: 2 weeks
* Teach the AR5212/AR5416 ANI code to use the RX filter methods, rather
than calling the RX filter routines directly.
* Make HAL_ANI_PRESENT and HAL_ANI_MODE unconditionally available,
regardless of whether ah_ani_function is masking it.
* (Mostly) fully disable ANI if interference mitigation is disabled.
When disabled, the ANI code doesn't touch any ANI/PHY registers,
leaving them the default value. This is in line with what the
Atheros reference driver does.
* Correctly set the ANI parameters during ANI reset, rather than
when ANI is enabled. In this way, if ANI is disabled or enabled
whilst the NIC is not active (and there's no current channel),
bogus parameters or a NULL pointer deference doesn't occur.
There's still some lingering issues - notably, the MIB events/interrupts
aren't fully disabled, so MIB interrupts still occur. I'll worry about
that later.
Approved by: re (kib)
This in particular fixes radar PHY handling - on the AR5212
NIC, one enables the AR_PHY_ERR_RADAR bit in AR_PHY_ERR;
the AR5416 and later also needs a bit set in AR_RX_FILTER.
A follow-up commit is needed to convert the AR5416 ANI code
to use this particular method, as it's currently using the
AR5212 methods directly.
Obtained from: Atheros
Approved by: re (kib)
- Fix usbhidctl and usbhidaction to handle HID devices with multiple
report ids, such as multimedia keyboards.
- Add collection type and report id to the `usbhidctl -r` output. They
are important for proper device understanding and debugging.
- Fix usbhidaction tool to properly handle items having report_count
more then 1.
Approved by: re (kib)
MFC after: 2 weeks
the ADC calibrations if the NIC is in 5ghz 11a or 5ghz HT/20 modes.
I've been told that the dual-ADC is only engaged in turbo/40mhz modes.
Since Sowl (AR9160) seems to return valid-looking calibration data
in 5ghz 20MHz modes, I'm only disabling it for Merlin for now.
It may turn out I can disable it for all chipsets and only enable
it for 40MHz modes.
Approved by: re (kib)
