The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
The SES4r3 standard requires that element descriptors may only contain ASCII
characters in the range 0x20 to 0x7e. Some SuperMicro expanders violate
that rule. This patch adds a sanity check to ses(4). Descriptors in
violation will be replaced by "<invalid>".
This patch fixes "sesutil --libxo xml" on such systems. Previously it would
generate non-well-formed XML output.
PR: 241929
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: Axcient
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
My changes in 351599 (kindly committed by avg) made the cd(4) media check
asynchronous to avoid a sleep while holding a mutex.
There was a difficult to reproduce bug with those changes that caused a
hang on boot on some single processor machines/VMs. Leandro Lupori
managed to reproduce the bug, diagnose it, and supplied a patch! Here is
his analysis, from the PR:
======
I was able to reproduce the problem described in comment#14.
Actually, I wasn't trying to reproduce it, I just started seeing it a few
weeks ago, in CURRENT.
I can reproduce it consistently, by using QEMU to run a PowerPC64 VM with a
single core/thread (-smp 1).
It happens only when there is no media in the emulated CD-ROM, a device
that QEMU adds by default, unless -nodefaults is specified in command line.
I've debugged it and this is what I've found:
1- After the CD probe is successful, GEOM will try to open the device,
which will end up calling cdcheckmedia(), that sets CD state to
CD_STATE_MEDIA_PREVENT.
2- Next, scsi_prevent() is executed and succeeds, the CD_FLAG_DISC_LOCKED
flag is set and CD state moves to CD_STATE_MEDIA_SIZE.
3- Next, scsi_read_capacity() is executed and fails, state is set to
CD_STATE_MEDIA_ALLOW, cdmediaprobedone() is called and wakes up
cdcheckmedia().
4- Then, when cdstart() is invoked to process CD_STATE_MEDIA_ALLOW, it
first checks if CD_FLAG_DISC_LOCKED is set, and if so skips directly to
CD_STATE_MEDIA_SIZE state. This will repeat the steps of bullet 3, entering
an infinite MEDIA_SIZE command loop.
When there is a least another core/thread, the GEOM thread that performed
the initial cdopen() will get scheduled again, closing the CD device, that
will call cdprevent(PR_ALLOW) that clears the CD_FLAG_DISC_LOCKED flag and
breaks the loop.
So, apparently, the problem is CD_STATE_MEDIA_ALLOW being skipped when
CD_FLAG_DISC_LOCKED is set. If I understand correctly, in this case, the
state should be advanced to CD_STATE_MEDIA size only when the current state
is CD_STATE_MEDIA_PREVENT.
=====
PR: kern/219857
Submitted by: Leandro Lupori <leandro.lupori@gmail.com>
MFC after: 1 week
I have some disks reporting "Logical unit is in process of becoming ready"
for about half an hour before finally reporting failure. During that time
CAM waits for the readiness during ~2 minutes for each request, that makes
system boot take very long time.
This change reduces wait times for the following requests to ~1 second if
previously long wait for that device has timed out.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
If we've found a device, we attempt to call xpt_action() on a ccb that's
already been released. Simply defer release until after we're done with it.
Reviewed by: imp, scottl
MFC after: 1 week
Before this change CAM used config_intrhook_establish() for this purpose,
but that approach does not allow to delay it again after releasing once.
USB stack uses root_mount_hold() to delay boot until bus scan is complete.
But once it is, CAM had no time to scan SCSI bus, registered by umass(4),
if it already done other scans and called config_intrhook_disestablish().
The new approach makes it work smooth, assuming the USB device is found
during the initial bus scan. Devices appearing on USB bus later may still
require setting kern.cam.boot_delay, but hopefully those are minority.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
When we do a daopen, we call dareprobe and wait for the results. The repoll runs
the da state machine up through the DA_STATE_RC* and then exits.
For removable media, we poll the device every 3 seconds with a TUR to see if it
has disappeared. This introduces a race. If the removable device has lots of
partitions, and if it's a little slow (like say a USB2 connected USB stick),
then we can have a fair amount of time that this reporbe is going on for. If,
during that time, damediapoll fires, it calls daschedule which changes the
scheduling priority from NONE to NORMAL. When that happens, the careful single
stepping in the da state machine is disrupted and we wind up sceduling multiple
read capacity calls. The first one succeeds and releases the reference. The
second one succeeds and releases the reference (and panics if the right code is
compiled into the da driver).
To avoid the race, only do the TUR calls while in state normal, otherwise just
reschedule damediapoll. This prevents the race from happening.
For the PROBEWP and PROBERC* states, add assertiosn that both the da device
state is in the right state, as well as the ccb state is the right one when we
enter dadone_probe{wp,rc}. This will ensure that we don't sneak through when
we're re-probing the size and write protection status of the device and thereby
leak a reference which can later lead to an invalidated peripheral going away
before all references are released (and resulting panic).
Reviewed by: scottl, ken
Differential Revision: https://reviews.freebsd.org/D22295
There are contexts where releasing the ccb triggers dastart() to be run
inline. When da was written, there was always a deferral, so it didn't matter
much. Now, with direct dispatch, we can call dastart from the dadone*
routines. If the probe state isn't updated, then dastart will redo things with
stale information. This normally isn't a problem, because we run the probe state
machine once at boot... Except that we also run it for each open of the device,
which means we can have multiple threads racing each other to try to kick off
the probe. However, if we update the state before we release the CCB, we can
avoid the race. While it's needed only for the probewp and proberc* states, do
it everywhere because it won't hurt the other places.
The race here happens because we reprobe dozens of times on boot when drives
have lots of partitions. We should consider caching this info for 1-2 seconds
to avoid this thundering hurd.
Reviewed by: scottl, ken
Differential Revision: https://reviews.freebsd.org/D22295
via 'diskinfo -v'. This avoids the need to track it down via CAM,
and should also work for disks that don't use CAM. And since it's
inherited thru the GEOM hierarchy, in most cases one doesn't need
to walk the GEOM graph either, eg you can use it on a partition
instead of disk itself.
Reviewed by: allanjude, imp
Sponsored by: Klara Inc
Differential Revision: https://reviews.freebsd.org/D22249
Clang trunk recently gained this new warning, and complains about the
sizeof(trim->data) / sizeof(struct nvme_dsm_range) expression, since
the left hand side's element type (char) does not match the right hand
side's type. The byte buffer is unnecessary so we can remove it to clean
up the code and fix the warning at the same time.
No functional change.
Submitted by: James Clarke <jrtc27@jrtc27.com>
Reviewed by: imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21912
It is typical to have one, but no longer true for multi-actuator HDDs
with separate LUN for each actuator.
MFC after: 4 days
Sponsored by: iXsystems, Inc.
This is a rework of r344701, that noticed that number of bytes passes to
8 bit sector count field gets truncated. First decision was to not pass
anything, since ATA specs define the field as N/A. But it appeared to be a
problem for some SAT devices, that require information about data transfer
to operate properly. Some additional investigation shown that it is quite
a common practice to set unused fields of ATA commands (fortunately ATA
specs formally allow it) to supply the information to SAT layer. I have
found SAS-SATA interposer that does not allow pass-through without it.
As side effect, reduce code duplication by removing ata_do_28bit_cmd()
function, replacing it with more universal ata_do_cmd().
MFC after: 1 week
Sponsored by: iXsystems, Inc.
XPT_DEV_ADVINFO call should be protected by the lock of the specific
device it is addressed to, not the lock of SES device. In some weird
case, probably with hardware violating standards, it sometimes caused
NULL dereference due to race.
To protect from it further, add lock assertion to *_dev_advinfo().
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This makes the media check process asynchronous, so we no longer block
in cdstrategy() to check for media.
PR: 219857
Obtained from: ken
MFC after: 3 weeks
Even if we do not expect retries, we better be sure, since otherwise it
may result in use after free kernel panic. I've noticed that it retries
SCSI_STATUS_BUSY even with SF_NO_RECOVERY | SF_NO_RETRY.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
It allows to read and write block descriptors alike to mode page parameters.
It allows to change block size or short-stroke HDDs or overprovision SSDs.
Depenting on -P parameter the change can be either persistent or till reset.
In case of block size change device may need reformat after the setting.
In case of SSD overprovisioning format or sanitize may be needed to really
free the flash.
During implementation appeared that csio_encode_visit() can not handle
integers of more then 4 bytes, that makes 8-byte LBA handling awkward.
I had to split it into two 4-byte halves now.
MFC after: 1 week
Relnotes: yes
Sponsored by: iXsystems, Inc.
If not limited by write_same_max_lba option, split operation into several
2^^31 blocks chunks in a loop. For large disks it may take a while, so
setting write_same_max_lba may be useful to avoid timeouts.
While there, fix build with CAM_CTL_DEBUG.
MFC after: 2 weeks
The values to report can be set via LUN options. It can be useful for
testing, and also required for Drive Maintenance 2016 feature set.
MFC after: 2 weeks
CTL implements all defined feature sets except Drive Maintenance 2016,
which is not very applicable to such a virtual device, and implemented
only partially now. But may be it could be fixed later at least for
completeness.
MFC after: 2 weeks
ATA sanitize is functionally identical to SCSI, just uses different
initiation commands and status reporting mechanism.
While there, make kernel better handle sanitize commands and statuses.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While for ATA disks resize is even more rare situation than for SCSI, it
may happen in case of HPA or AMA being used. Make ATA XPT report minor
IDENTIFY DATA change to upper layers with AC_GETDEV_CHANGED, and ada(4)
periph driver handle that event, recalculating all the disk properties and
signalling resize to GEOM. Since ATA has no mechanism of UNIT ATTENTIONs,
like SCSI, it has no way to detect that something has changed. That is why
this functionality depends on explicit reprobe via XPT_REPROBE_LUN call.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
In principle this should not matter as it's a union and they point to
the same memory location but based on the code above we should be
accessing .sata and not .ata.
Submitted by: arichardson
Reviewed by: scottl, imp
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21002
AMA replaced HPA in ACS-3 specification. It allows to limit size of the
disk alike to HPA, but declares inaccessible data as indeterminate. One
of its practical use cases is to under-provision SATA SSDs for better
reliability and performance.
While there, fix HPA Security detection/reporting.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
This was added for emulation of Linux's CDROMSUBCHNL, but allows
users with read access to a cd(4) device to overwrite kernel memory
provided that the driver detects some media present.
Reimplement CDROMSUBCHNL by bouncing the data from CDIOCREADSUBCHANNEL
through the linux_cdrom_subchnl structure passed from userspace.
admbugs: 768
Reported by: Alex Fortune
Security: CVE-2019-5602
Security: FreeBSD-SA-19:11.cd_ioctl
Use the cam_ed copy of ata_params rather than malloc and freeing
memory for it. This reaches into internal bits of xpt a little, and
I'll clean that up later.
Create ata_param_fixup
Create a common fixup routine to do the canonical fixup of the
ata_param fixup. Call it from both the ATA and the ATA over SCSI
paths.
Go ahead and completely fix the ata_params before calling the veto
function. This breaks nothing that uses it in the tree since
ata_params is ignored in storvsc_ada_probe_veto which is the only
in-tree consumer.
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me. I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?
This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.
I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.
MFC after: 2 weeks
SES specifications tell: "The Additional Element Status descriptors shall
be in the same order as the status elements in the Enclosure Status
diagnostic page". It allows us to question ELEMENT INDEX that is lower
then values we already processed. There are many SAS2 enclosures with
this kind of problem.
While there, add more specific error messages for cases when ELEMENT INDEX
is obviously wrong. Also skip elements with INVALID bit set.
MFC after: 2 weeks
