TTL a packet must have when received on a socket. All packets with a
lower TTL are silently dropped. Works on already connected/connecting
and listening sockets for RAW/UDP/TCP.
This option is only really useful when set to 255 preventing packets
from outside the directly connected networks reaching local listeners
on sockets.
Allows userland implementation of 'The Generalized TTL Security Mechanism
(GTSM)' according to RFC3682. Examples of such use include the Cisco IOS
BGP implementation command "neighbor ttl-security".
MFC after: 2 weeks
Sponsored by: TCP/IP Optimization Fundraise 2005
connection rates, which is causing problems for some users.
To retain the security advantage of random ports and ensure
correct operation for high connection rate users, disable
port randomization during periods of high connection rates.
Whenever the connection rate exceeds randomcps (10 by default),
randomization will be disabled for randomtime (45 by default)
seconds. These thresholds may be tuned via sysctl.
Many thanks to Igor Sysoev, who proved the necessity of this
change and tested many preliminary versions of the patch.
MFC After: 20 seconds
- Trailing tab/space cleanup
- Remove spurious spaces between or before tabs
This change avoids touching files that Andre likely has in his working
set for PFIL hooks changes for IPFW/DUMMYNET.
Approved by: re (scottl)
Submitted by: Xin LI <delphij@frontfree.net>
lock assertions even if IPv6 is compiled into the kernel. Previously,
inclusion of IPv6 and locking assertions would result in a rapid
assertion failure as IPv6 was not properly locking inpcbs.
Giant if debug.mpsafenet=0, as any points that require synchronization
in the SMPng world also required it in the Giant-world:
- inpcb locks (including IPv6)
- inpcbinfo locks (including IPv6)
- dummynet subsystem lock
- ipfw2 subsystem lock
the routing table. Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.
It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination. Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.
tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.
It removes significant locking requirements from the tcp stack with
regard to the routing table.
Reviewed by: sam (mentor), bms
Reviewed by: -net, -current, core@kame.net (IPv6 parts)
Approved by: re (scottl)
the MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols. This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.
This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.
For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks. Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.
Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.
Reviewed by: sam, bms
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
(aka RFC2292bis). Though I believe this commit doesn't break
backward compatibility againt existing binaries, it breaks
backward compatibility of API.
Now, the applications which use Advanced Sockets API such as
telnet, ping6, mld6query and traceroute6 use RFC3542 API.
Obtained from: KAME
specific interfaces. This is required by aodvd, and may in future help us
in getting rid of the requirement for BPF from our import of isc-dhcp.
Suggested by: fenestro
Obtained from: BSD/OS
Reviewed by: mini, sam
Approved by: jake (mentor)
(See: ftp://ftp.rfc-editor.org/in-notes/rfc3514.txt)
This fulfills the host requirements for userland support by
way of the setsockopt() IP_EVIL_INTENT message.
There are three sysctl tunables provided to govern system behavior.
net.inet.ip.rfc3514:
Enables support for rfc3514. As this is an
Informational RFC and support is not yet widespread
this option is disabled by default.
net.inet.ip.hear_no_evil
If set the host will discard all received evil packets.
net.inet.ip.speak_no_evil
If set the host will discard all transmitted evil packets.
The IP statistics counter 'ips_evil' (available via 'netstat') provides
information on the number of 'evil' packets recieved.
For reference, the '-E' option to 'ping' has been provided to demonstrate
and test the implementation.
control block. Allow the socket and tcpcb structures to be freed
earlier than inpcb. Update code to understand an inp w/o a socket.
Reviewed by: hsu, silby, jayanth
Sponsored by: DARPA, NAI Labs
in_pcbconnect() called in_pcbconnect_setup(). This version performs
all of the functions of in_pcbconnect() except for the final
committing of changes to the PCB. In the case of an EADDRINUSE error
it can also provide to the caller the PCB of the duplicate connection,
avoiding an extra in_pcblookup_hash() lookup in tcp_connect().
This change will allow the "temporary connect" hack in udp_output()
to be removed and is part of the preparation for adding the
IP_SENDSRCADDR control message.
Discussed on: -net
Approved by: re
called in_pcbbind_setup() that does everything except commit the
changes to the PCB. There should be no functional change here, but
in_pcbbind_setup() will be used by the soon-to-appear IP_SENDSRCADDR
control message implementation to check or allocate the source
address and port.
Discussed on: -net
Approved by: re
configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).
As noted previously, don't use FAST_IPSEC with INET6 at the moment.
Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks
- use `struct uma_zone *' instead of uma_zone_t, so that <sys/uma.h> isn't
a prerequisite.
- don't include <sys/uma.h>.
Namespace pollution makes "opaque" types like uma_zone_t perfectly
non-opaque. Such types should never be used (see style(9)).
Fixed subsequently grwon dependencies of this header on its own pollution:
- include <sys/_mutex.h> and its prerequisite <sys/_lock.h> instead of
depending on namespace pollution 2 layers deep in <sys/uma.h>.
in6_v4mapsin6_sockaddr() which allocate the appropriate sockaddr_in*
structure and initialize it with the address and port information passed
as arguments. Use calls to these new functions to replace code that is
replicated multiple times in in_setsockaddr(), in_setpeeraddr(),
in6_setsockaddr(), in6_setpeeraddr(), in6_mapped_sockaddr(), and
in6_mapped_peeraddr(). Inline COMMON_END in tcp_usr_accept() so that
we can call in_sockaddr() with temporary copies of the address and port
after the PCB is unlocked.
Fix the lock violation in tcp6_usr_accept() (caused by calling MALLOC()
inside in6_mapped_peeraddr() while the PCB is locked) by changing
the implementation of tcp6_usr_accept() to match tcp_usr_accept().
Reviewed by: suz
indication of whether this happenned so the calling function
knows whether or not to unlock the pcb.
Submitted by: Jennifer Yang (yangjihui@yahoo.com)
Bug reported by: Sid Carter (sidcarter@symonds.net)
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
For TCP, verify that the sequence number in the ICMP packet falls within
the tcp receive window before performing any actions indicated by the
icmp packet.
Clean up some layering violations (access to tcp internals from in_pcb)
and 1.84 of src/sys/netinet/udp_usrreq.c
The changes broken down:
- remove 0 as a wildcard for addresses and port numbers in
src/sys/netinet/in_pcb.c:in_pcbnotify()
- add src/sys/netinet/in_pcb.c:in_pcbnotifyall() used to notify
all sessions with the specific remote address.
- change
- src/sys/netinet/udp_usrreq.c:udp_ctlinput()
- src/sys/netinet/tcp_subr.c:tcp_ctlinput()
to use in_pcbnotifyall() to notify multiple sessions, instead of
using in_pcbnotify() with 0 as src address and as port numbers.
- remove check for src port == 0 in
- src/sys/netinet/tcp_subr.c:tcp_ctlinput()
- src/sys/netinet/udp_usrreq.c:udp_ctlinput()
as they are no longer needed.
- move handling of redirects and host dead from in_pcbnotify() to
udp_ctlinput() and tcp_ctlinput(), so they will call
in_pcbnotifyall() to notify all sessions with the specific
remote address.
Approved by: jlemon
Inspired by: NetBSD
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
