Commit Graph

30 Commits

Author SHA1 Message Date
Jonathan T. Looney
bd79708dbf In the TCP stack, the hhook(9) framework provides hooks for kernel modules
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.

Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.

This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.

Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.

Reviewed by:	rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D8185
2016-10-12 02:16:42 +00:00
Ian Lepore
7651aa600b Consolidate debugging options from all arm kernel configs to std.arm[v6]. 2016-07-09 20:42:57 +00:00
Andrew Turner
aa8dbafa71 Create the twsi device option in preparation to move the driver to a common
location. The device is also found in Allwinner SoCs.

Sponsored by:	ABT Systems Ltd
2016-02-14 23:42:07 +00:00
Zbigniew Bodek
fa85e32f0c Mark gpio as "optional" in files.mv and edit Marvell's kernconfs
Including arm/mv/gpio.c now depends on 'gpio' device. 'device gpio' was
added to all kernconf files of Marvell boards, except ARMADAXP (dummy
mv_gpio_res definition was removed) and ARMADA38X (not supported yet).

This commit allows to use generic files.mv on A38X.

Reviewed by:    andrew
Obtained from:	Semihalf
Sponsored by:	Stormshield
Submitted by:	Bartosz Szczepanek <bsz@semihalf.com>
Differential revision:	https://reviews.freebsd.org/D4372
2016-01-20 11:57:11 +00:00
Zbigniew Bodek
3c71b84f0a Add etherswitch support to mge
This commit introduces support for etherswitch devices that utilize SMI as
a way of accessing its registers. SMI register is located in address space
of mge -- access to it was exported through MDIO interface.

Attachment functions were enhanced so as to ensure proper initialisation
in both cases: 1) PHYs attached directly to mge, 2) PHYs attached to
switch device and switch attached to mge. Attachment of etherswitch device
depends on dts entry with compatible="mrvl,sw" property. If none is found,
typical PHY attachment procedure follows.

In case of switch attached, PHYs' status and configuration is accessible
via etherswitchcfg, and ifconfig shows always-up, non-configurable mge
interfaces.

Due to the fact that there may be simultaneous accessess to SMI
registers (e.g. from PHY attached to one of mge instances and switch
to the other), SMI access interlock was added. It is SX lock,
because sleep ability is necessary -- busy-waiting would result
in poor performance due to long delays required by hardware.
Underlying switch driver is obliged to use sleepable locks as well.

Reviewed by:    adrian
Obtained from:  Semihalf
Submitted by:   Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D3900
2015-10-25 22:00:56 +00:00
Andrew Turner
d667b90d53 Clean up the ARM kernel configs to use 'include<space><tab>"file"'. 2015-05-07 12:38:23 +00:00
Ian Lepore
65c3de4e62 Create std.arm and std.armv6 config files and include the right one from
each of the existing kernel configs.  This gives a place to put config
that applies to the entire arch.

Add the ARM_NEW_PMAP option to std.armv6.  This is working well in early
testing and it's time for wide exposure, but it's still nice to be able
to fall back to the old implementation for testing when a problem comes
along.  Eventually the option and the old implementation will go away.

The opportunity now exists to move a whole lot of boilerplate from all the
arm kernel config files into std.arm*, but that's a commit for another day.
2015-05-05 16:09:25 +00:00
Ian Lepore
868c7673d2 Remove MODULES_OVERRIDE="" for Marvel-based armv5 systems.
Also add some #NO_UNIVERSE to configs that essentially duplicate DB-88F6XXX.
2015-03-10 14:36:51 +00:00
John Baldwin
3e32dff52c Remove "New" label from NFSCL/NFSD now that they are the only NFS
client/server.  While here, remove duplicate NFSCL from sys/conf/NOTES.

Approved by:	rmacklem
2015-01-06 16:15:57 +00:00
Ian Lepore
64e9597058 Remove DIAGNOSTIC from the kernel config of low-end arm systems. Sanity
checks such as vmem_check() can make a low-end system go completely
unresponsive for as much as 3 seconds out of every 10.
2014-09-03 19:37:41 +00:00
Warner Losh
d4f95c889d In kernel config files, it is supposed to be 'options<space><tab>' not
'options<tab><tab>', per long standing (but recently not so strictly
enforced) convention.
2014-03-18 14:41:18 +00:00
Warner Losh
2299abfac5 Make all the comments '# ' and align to same column. This fixes the
rampently incosnsitent usage which made cut and paste from one file
to another look ugly.
2014-03-16 15:22:46 +00:00
Ian Lepore
6f5f9035f7 Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.  Move the other contents into each of the individual
config files.

Requested by:	imp
2014-03-07 21:36:49 +00:00
Ian Lepore
082660c8e1 Revert r260440. I didn't realize that most of this change was already
in effect due to r250753.  That is sufficient for all SoCs with a 32 byte
cache line size.  Systems with 64 byte cache lines will need the option;
that will be done in a separate commit.

Thanks to loos@ for pointing out r250753.
2014-02-07 03:30:16 +00:00
Ian Lepore
7c2136adbb Add option USB_HOST_ALIGN to configs that contain 'device usb'. Setting
this to the cache line size is required to avoid data corruption on armv4
and armv5, and improves performance on armv6, in both cases by avoiding
partial cacheline flushes for USB IO.

All these configs already exist in 10-stable.  A few that don't (and
thus can't be MFC'd yet) will be committed separately.
2014-01-08 03:40:18 +00:00
David E. O'Brien
0e6a0799a9 Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
David E. O'Brien
99ff83da74 Decouple yarrow from random(4) device.
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
  The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.

* random(4) device doesn't really depend on rijndael-*.  Yarrow, however, does.

* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
  random_adaptor is basically an adapter that plugs in to random(4).
  random_adaptor can only be plugged in to random(4) very early in bootup.
  Unplugging random_adaptor from random(4) is not supported, and is probably a
  bad idea anyway, due to potential loss of entropy pools.
  We currently have 3 random_adaptors:
  + yarrow
  + rdrand (ivy.c)
  + nehemeiah

* Remove platform dependent logic from probe.c, and move it into
  corresponding registration routines of each random_adaptor provider.
  probe.c doesn't do anything other than picking a specific random_adaptor
  from a list of registered ones.

* If the kernel doesn't have any random_adaptor adapters present then the
  creation of /dev/random is postponed until next random_adaptor is kldload'ed.

* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
  system wide one.

Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
2013-07-29 20:26:27 +00:00
Grzegorz Bernacki
b91fab4255 Add architecture dependent code to support NAND Framework on Marvell SoCs.
Obtained from: Semihalf
Supported by:  FreeBSD Foundation, Juniper Networks
2012-05-18 14:41:14 +00:00
Ed Schouten
92396a3174 Remove pty(4) from our kernel configurations.
As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel unconditionally. If it turns out high profile depend on the
pty(4) module anyway, I'd rather get those fixed. So please report any
issues to me.

The pty(4) module is still available as a kernel module of course, so a
simple `kldload pty' can be used to run old-style pseudo-terminals.
2012-03-21 08:38:42 +00:00
Rick Macklem
88c037e26a Change all the sample kernel configurations to use
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.

Approved by:	re (hrs)
2011-08-07 20:16:46 +00:00
Alexander Motin
97b53e3634 Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
Rafal Jaworowski
db5ef4fc77 Convert Marvell ARM platforms to FDT convention.
The following systems are involved:

  - DB-88F5182
  - DB-88F5281
  - DB-88F6281
  - DB-78100
  - SheevaPlug

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Marvell ARM SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say
    good by to obio / mbus drivers and numerous hard-coded config data.

Note that world needs to be built WITH_FDT for the affected platforms.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
Andrew Thompson
b850ecc180 Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after:	1 week
2010-04-22 21:31:34 +00:00
Attilio Rao
88cbfa852e Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by:	Sandvine Incorporated
Requested by:	emaste
Discussed with:	kib
2010-02-10 16:30:04 +00:00
Rafal Jaworowski
9d02143909 Introduce ata(4) support for Marvell integrated SATA controllers (found on
88F5xxx, 88F6xxx and MV78xxx system on chip devices).

Reviewed by:	stas
Obtained from:	Semihalf
2009-06-24 15:41:18 +00:00
Jun Kuriyama
b3b17597ea - Use "device\t" and "options \t" for consistency. 2009-05-10 00:00:25 +00:00
Sam Leffler
59514054b1 enable use of modules but disable them by adding MODULES_OVERRIDE=""
in each config file until we can sort out issues in the modules tree

Reviewed by:	imp
MFC after:	1 month
2008-11-30 17:53:19 +00:00
Rafal Jaworowski
09f90fe045 Enable PCI in Marvell kernel configs. 2008-11-19 11:47:23 +00:00
Marcel Moolenaar
1706f03059 Add arm/conf/DEFAULTS and populate it with:
machine arm
        device  mem
        options GEOM_BSD
        options GEOM_MBR

Remove the first two from all kernel configuration files and
change geom_bsd and geom_mbr from standard to optional.
2008-10-23 01:51:55 +00:00
Rafal Jaworowski
d0ee9aab8e Add kernel config files for Marvell development boards.
FreeBSD 8-CURRENT was tested and run successfully on the following eval
boards and devices :

  * DB-88F5182, DB-88F5281 (Orion based)

  * DB-88F6281, RD-88F6281 (Kirkwood based)

  * DB-78100 (Discovery based)

For more detailed info on build instructions and other examples please refer
to http://wiki.freebsd.org/FreeBSDMarvell

Obtained from:	Marvell, Semihalf
2008-10-14 08:18:27 +00:00