I have no idea what this does (and until now that it even existed), but
apparently it needs this entry changed for the MSG_TLSAPPDATA, since
it is kernel only.
Linking the full version of clang 11 results in errors similar to:
lld: error: /usr/src/contrib/llvm-project/clang/lib/StaticAnalyzer/Frontend/AnalysisConsumer.cpp:736:(.text._ZN5clang4ento22CreateAnalysisConsumerERNS_16CompilerInstanceE+0xE0): relocation R_MIPS_CALL16 out of range: 48920 is not in [-32768, 32767]; references operator new(unsigned long)
Add -mxgot to the compilation flags for llvm libraries to work around
this error. This may be too big of a hammer, but it can always be
refined later.
MFC after: 6 weeks
Introduce G_PART_ALIAS_SOLARIS_RESERVED, GPT_ENT_TYPE_SOLARIS_RESERVED et al.,
to make gpart show output more convenient on systems with illumos/openindiana
disks visible.
Submitted by: Juraj Lutter <otis AT sk.FreeBSD.org>
Reviewed by: bcr(manpages), delphij, myself
Differential Revision: https://reviews.freebsd.org/D26012
The standard uses 80+80 and 80p80 but nowhere 80_80.
Switch the latter to 80P80 for all the macros and comments refering
to #defined flags which I could find.
The only place we leave as 80p80 is the ifconfig command line arguments
as we spell them all in lower case.
Ideally we would use 80+80 for any interactions with the user and
80P80 for anything internal but let us not confuse parsers and
hence avoid the '+' in either case.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26001
flua does have some specific bits that will include luaconf.h, but the
definition of LUA_USE_DLOPEN for those won't matter. This belongs in liblua
instead.
To expand on my previous commit, which was a little sparse with details,
it's not really safe to allow LUA_USE_DLOPEN with host lib paths being used.
The host system could have an entirely different lua version and this could
cause us to crash and burn.
If we want to revive this later, we need to make sure to define c module
paths inside OBJDIR that are compiled against whatever version we've
bootstrapped.
Pointy hat: kevans
RFC5424 defines NILVALUE as '-'. Replace its usage with a macro and
separate out the fields to be more clear. fputs(3) is used in some
places to avoid hiding possible format string problems in a macro.
Reviewed by: cem, vangyzen (earlier version)
Sponsored by: Dell EMC
Use /usr not /usr/local for base system components.
Use /usr/lib/flua and /usr/share/flua (not lua) for consistency and to
avoid the possibility that other software accidentally finds our base
system modules.
Also drop the version from the path, as flua represents an unspecified
lua version that corresponds to the FreeBSD version it comes with.
LUA_USE_DLOPEN is not yet enabled because some additional changes are
needed wrt symbol visibility.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24605
This adds support for the Cortex-A76 and Neoverse-N1 PMU counters to pmc.
While here add more PMCR_IDCODE values and check the implementers code is
correct before setting the PMU type.
Reviewed by: bz, emaste (looks reasonable to me)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25959
Apparently it was not exported, because scandir_b.c was not included
into libc SRCS. Export it with the CURRENT-13 version.
Also, because it was not exported before ino64, clean up
scandir-compat11.c.
PR: 248572
Reported by: Alex S <iwtcex@gmail.com>
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26020
libifconfig_sfp.h provides an API in libifconfig for querying SFP module
properties, operational status, and vendor strings, as well as descriptions
of the various fields, string conversions, and other useful helpers for
implementing user interfaces.
SFP module status is obtained by reading registers via an I2C interface.
Descriptions of these registers and the values therein have been collected
in a Lua table which is used to generate all the boilerplace C headers and
source files for accessing these values, their names, and descriptions.
The generated code is fully commented and readable.
This is the first use of libifconfig in ifconfig itself. For now, the
scope remains very limited. Over time, more of ifconfig will be replaced
with libifconfig.
Some minor changes to the formatting of ifconfig output have been made:
- Module memory hex dumps are indented one extra space as a result of using
hexdump(3) instead of a bespoke hex dump function.
- Media descriptions have an added two-character short-name in parenthesis.
- QSFP modules were incorrectly displaying TX bias current as power. Now
TX channels display bias current, and this change has been made for both
SFP and QSFP modules for consistency.
A Lua binding for libifconfig including this functionality is implemented
but has not been included in this commit. The plan is for it to be
committed after dynamic module loading has been enabled in flua.
Reviewed by: kp, melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25494
required by both the static analyzer (MK_CLANG_FULL) and clang-format
(MK_CLANG_FORMAT). We could also invent yet another SRCS variant, but
that seems a bit overkill.
lib/libpam/modules/pam_exec/pam_exec.c:222:56: error: format specifies type 'char *' but the argument has type 'const void *' [-Werror,-Wformat]
if (asprintf(&envstr, "%s=%s", pam_item_env[i].name, item) < 0)
~~ ^~~~
On ELFv2, the overflow parameters in the stack frame are at a different offset
from sp than ELFv1. Adjust code to use the correct offset in all cases.
This had resulted in argv[8] and up being copied to the incorrect address
in the new context's initial stack frame.
This is not necessarily the only bug in this function, I need to do a full
review still and ensure the rest of the math is sane for ELFv2 stack frames.
Reported by: pherde (Probably. My notes are a bit unclear.)
Reviewed by: jhibbits (in irc)
Sponsored by: Tag1 Consulting, Inc.
The -I option (and hotkey) is reused for this. Skipping symbol resolution is
moved to the new -A option (and hotkey).
While arguably this violates POLA I think it's a change for the better.
ALso note the -I option was added in head.
Differential Revision: https://reviews.freebsd.org/D21658
Refactor to create devinfo_free_dev(). Call it to plug a memory leak
on two error paths in devinfo_init_devices().
Reported by: Coverity
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Unlike lld, ld.bfd doesn't infer the emulation from the first object
file, but assumes its compiled in default for ld -r.
Differential Revision: https://reviews.freebsd.org/D25728
In lib/Makefile, we document the dependency with SUBDIR_DEPEND
For buildworld orchestration, just prebuild libregex if GOOGLETEST is
enabled. googletest will get built in a later pass.
gtest tests want to use \w ([[:alnum:]]) at the very least, which was
causing them to fail after r363679.
Start linking against libregex so that this shorthand is implemented.
PR: 248452
The entire patch-set is not yet mature enough for commit, but this usable
subset is generally enough for googletest to be happy with and mostly map to
some existing concepts, so they're not as invasive.
The specific changes included here are:
- Branching in BREs with \|
- \w and \W for [[:alnum:]] and [^[:alnum:]] respectively
- \s and \S for [[:space:]] and [^[:space:]] respectively
- Additional quantifiers in BREs, \? and \+ (self-explanatory)
There's some #ifdef'd out work for allowing empty branches as a match-all.
This is a feature that's under assessment... future work will determine
how standard this behavior is and act accordingly.
The constant seems to exists on MacOS X >= 10.8.
Requested by: swills
Reviewed by: allanjude, kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25933
We bootstrap this file to allow compiling FreeBSD on Linux systems since
some boostrap tools use setmode(). Unfortunately, glibc's sys/stat.h
declares a non-static getumask() function (which is unimplemented!) and
that conflicts with the local getumask() function. To work around this
simply use a different name here.
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D25929
GCC's cpp was exiting immediately when it failed to find requested
includes (<ncurses_cfg.h> and <ncurses_defs.h>). clang-cpp emitted an
error for the missing header files but continued processing the file
(thus not honoring any macros defined in the missing headers).
Arguably, the awk script is buggy since it doesn't check the return
value of the command it executes.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D25731
RISC-V doesn't support floating-point exceptions.
RISC-V Instruction Set Manual: Volume I: User-Level ISA, 11.2 Floating-Point
Control and Status Register: "As allowed by the standard, we do not support
traps on floating-point exceptions in the base ISA, but instead require
explicit checks of the flags in software. We considered adding branches
controlled directly by the contents of the floating-point accrued exception
flags, but ultimately chose to omit these instructions to keep the ISA simple."
We still need these functions, because some applications (notably Perl) call
them, but we cannot provide a meaningful implementation.
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25740
In IEEE 1003.1-2008 [1] and earlier revisions, BRE/ERE grammar allows for
any character to be escaped, but "ORD_CHAR preceded by an unescaped
<backslash> character [gives undefined results]".
Historically, we've interpreted an escaped ordinary character as the
ordinary character itself. This becomes problematic when some extensions
give special meanings to an otherwise ordinary character
(e.g. GNU's \b, \s, \w), meaning we may have two different valid
interpretations of the same sequence.
To make this easier to deal with and given that the standard calls this
undefined, we should throw an error (EESCAPE) if we run into this scenario
to ease transition into a state where some escaped ordinaries are blessed
with a special meaning -- it will either error out or have extended
behavior, rather than have two entirely different versions of undefined
behavior that leave the consumer of regex(3) guessing as to what behavior
will be used or leaving them with false impressions.
This change bumps the symbol version of regcomp to FBSD_1.6 and provides the
old escape semantics for legacy applications, just in case one has an older
application that would immediately turn into a pumpkin because of an
extraneous escape that's embedded or otherwise critical to its operation.
This is the final piece needed before enhancing libregex with GNU extensions
and flipping the switch on bsdgrep.
[1] http://pubs.opengroup.org/onlinepubs/9699919799.2016edition/
PR: 229925 (exp-run, courtesy of antoine)
Differential Revision: https://reviews.freebsd.org/D10510
Use the existing PMC_CPUID_LEN to size pmc_cpuid in the kernel and various
buffers for reading it in libpmc. This avoids some extra syscalls and
malloc/frees.
While in here, use strlcpy to copy a user-provided cpuid string instead of
memcpy, to make sure we terminate the buffer.
Reviewed by: mav
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25679
It is apparently broken when assembled by contemporary GNU as as well as
Clang IAS (which is used in the default configuration).
PR: 248221
Reported by: pizzamig
Sponsored by: The FreeBSD Foundation
lbh is included for consistency with other functions and in case
future work needs to use it, but it is currently unused. Mark it,
and a post-OpenZFS-import world will be able to raise WARNS of
libbe to the default (pending some minor changes to openzfs libzfs).
MFC after: 3 days
10.0.1 final (aka llvmorg-10.0.1-0-gef32c611aa2).
There were no changes since rc2, except in the upstream regression
tests, which we do not ship.
Relnotes: yes
MFC after: immediately (no material changes except tag)
Split the ELF feature note into a separate file that is linked into
*crt1.o the same as crtbrand.S was before. crtbrand.o is now linked
into crti.o on all platforms in addition to *crt1.o.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25304
This is neither POSIX compliant nor what the implementation does.
This could be allowed by changing the value of TCSAFLUSH from 2 to 3,
but that doesn't seem worthwhile after 25+ years.
Reviewed by: imp
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25659
Generate libpmc_events.c in a temporary file first and only overwrite it
if the files are actually different.
This avoids compiling and relinking the different variants of libpmc on
every incremental build.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D24784
It follows the equivalent Linux change to be able to differentiate
skylakex and cascadelakex, sharing the same model but not stepping.
This fixes skylakex handling broken by r363144.
MFC after: 6 days
In certain situations lseek(2) will return successful although if no seek
was performed. This can happen when operating on devices that don't support
seeking (older tape drives) or when operating on changeable media devices
(such as DVD or Blu-ray devices) without a medium inserted.
Document this within the man page and update the POSIX compliance while here.
PR: 162765
Submitted by: arundel@
Reported by: arundel@
Reviewed by: bcr (mentor)
Approved by: bcr (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25646
Some older references called it 'arg'
Also fix a syntax error that was underlining an entire sentence.
PR: 247386
Reported by: Paul Floyd <paulf@free.fr>, PauAmma (research)
MFC after: 2 weeks
Sponsored by: Klara Inc.
memfd_create fds will no longer require an ftruncate(2) to set the size;
they'll grow (to the extent that it's possible) upon write(2)-like syscalls.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25502
While this behaviour is harmless, it is really just an artifact of the
fact that the msgctl(2) implementation uses a user-visible structure as
part of the internal implementation, so it is not deliberate and these
pointers are not useful to userspace. Thus, NULL them out before
copying out, and remove references to them from the manual page.
Reported by: Jeffball <jeffball@grimm-co.com>
Reviewed by: emaste, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25600
This test checks if value received from kvm_read is sane, based on
value returned by sysctl interface.
This should catch regression on bug fixed by r359160
Reviewed by: jhb
Approved by: jhibbits (mentor)
MFC after: 1 week
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23783
This was a copy-paste bug in r362902. While here, switch to using
${.TARGET}.
Reported by: Kjell Tore Ullavik <ktullavik@gmail.com>
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25585
- Add a missing Pp [1]
- Remove uses of Tn
- Use "Xr open 2" when appropriate
PR: 247783 [1]
Submitted by: PauAmma <pauamma@gundo.com> [1]
MFC after: 3 days
The new function operates similarly to ifconfig_lagg_get_lagg_status and
likewise is accompanied by a function to free the bridge status data structure.
I have included in this patch the relocation of some strings describing STP
parameters and the PV2ID macro from ifconfig into net/if_bridgevar.h as they
are useful for consumers of libifconfig.
Reviewed by: kp, melifaro, mmacy
Approved by: mmacy (mentor)
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25460
When the RISC-V port was initially committed to FreeBSD, GCC would
generate 64-bit long doubles, and the definitions in _fpmath.h reflected
that. This was changed to 128-bit in GCC later that year [1], but the
definitions were never updated, despite the documented workaround. This
causes printf(3) and friends to interpret only the low 64-bits of a long
double in ldtoa, thereby printing incorrect values.
Update the definitions now that both clang and GCC generate 128-bit long
doubles.
[1] 54b21fc5ae
PR: 242067
Reported by: Dennis Clarke <dclarke@blastwave.org>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25420
This was added in r293648 to pass -mlong-calls for crt1.o and gcrt1.o.
The use of -mlong-calls was removed in r358851 for LLVM 10.0, leaving
STATIC_CFLAGS empty.
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25305
llvmorg-10.0.1-rc2-0-g77d76b71d7d.
Also add a few more llvm utilities under WITH_CLANG_EXTRAS:
* llvm-dwp, a utility for merging DWARF 5 Split DWARF .dwo files into
.dwp (DWARF package files)
* llvm-size, a size(1) replacement
* llvm-strings, a strings(1) replacement
MFC after: 3 weeks
Posix says that the interpretation of the locale string is
"implementation-defined", so we ought to document what is
actually recognized.
Also add a cross reference to locale(1).
PR: 247553
MFC after: 1 week
CAP_EVENT was omitted on pidfiles (in
pidfile_open()). There seems no reason why a process that creates
and writes a pidfile cannot monitor events on that file. This mod adds
the capability.
Reviewed by: cem@
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D25363
It seems this manpage was copied from kvm_getloadavg(3), but the
DIAGNOSTICS section was not updated completely. Update the section with
correct information about a return value of -1.
MFC after: 3 days
clang-format is enabled conditional on either WITH_CLANG_EXTRAS or
WITH_CLANG_FORMAT. Some sources in libclang are build conditional on
either rule, and obviously the clang-format binary itself depends on the
rule.
clang-format could still use a manual page.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25427
Some of the NetBSD contributed tests are gated behind the
__HAVE_LONG_DOUBLE flag. This flag seems to be defined only for
platforms whose long double is larger than their double. I could not
find this explicitly documented anywhere, but it is implied by the
definitions in NetBSD's sys/arch/${arch}/include/math.h headers, and the
following assertion from the UBSAN code:
#ifdef __HAVE_LONG_DOUBLE
long double LD;
ASSERT(sizeof(LD) > sizeof(uint64_t));
#endif
RISC-V has 128-bit long doubles, so enable the tests on this platform,
and update the comments to better explain the purpose of this flag.
Reviewed by: ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25419
OpenZFS generates events with a "zio_timestamp" field, which gets mistaken for
"timestamp" by libdevdctl due to imprecise string matching. Then later it is
assumed a "timestamp" field exists when it doesn't and an exception is thrown.
Add a space to the search string so we match exactly "timestamp" rather than
anything with that as a suffix.
Approved by: mav (mentor)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
is used by the IPPROTO_SCTP level socket options SCTP_GET_PEER_ADDRESSES
and SCTP_GET_LOCAL_ADDRESSES, which are used by libc to implement
sctp_getladdrs() and sctp_getpaddrs().
These changes allow an old libc to work on a newer kernel.
for the IPPROTO_SCTP level socket options SCTP_BINDX_ADD_ADDR and
SCTP_BINDX_REM_ADDR. These socket option are intended for internal
use only to implement sctp_bindx().
This is one user of struct sctp_getaddresses less.
struct sctp_getaddresses is strange and will be changed shortly.
Unable to find an editor, vipw would give this error:
# env EDITOR=fnord vipw
vipw: pw_edit(): No such file or directory
vigr or crontab do better:
# env EDITOR=fnord crontab -e
crontab: no crontab for root - using an empty one
crontab: fnord: No such file or directory
crontab: "fnord" exited with status 1
After this change, vipw behaves more like vigr or crontab:
# env EDITOR=fnord vipw
vipw: fnord: No such file or directory
vipw: "fnord" exited with status 1
Reviewed by: rpokala, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25369
The ELF notes compiled in C were placed in a section with the wrong type
(SHT_PROGBITS instead of SHT_NOTE). Previously, sed was used on the
generated assembly to rewrite the section type. Instead, write the notes
in assembly which permits setting the correct section type directly.
While here, move inline assembly entry points out of C and into assembly
for aarch64, arm, and riscv.
Reviewed by: kib
Tested on: amd64 (cirrus-ci), riscv64
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25211
- Add STANDARDS and HISTORY sections within the appropriate manpages
- Mention two USENIX papers within kqueue(2) and strlcpy(3)
Reviewed by: bcr (mentor)
Approved by: bcr (mentor)
Obtained from: NetBSD
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D24650
The loader.ve.hashed list can easily exceed KENV_MVALLEN.
If so, bump kenv_mvallen to a multiple of KENV_MVALLEN to
accommodate the value.
Reviewed by: stevek
MFC after: 1 week
libc cannot assume that aligned_alloc and free come from jemalloc, or that
any application providing its own malloc and free is actually providing
aligned_alloc.
Switch back to malloc and just make sure we're passing a properly aligned
stack into rfork_thread, as an application perhaps can't reasonably replace
just malloc or just free without headaches.
This unbreaks ksh93 after r361996, which provides malloc/free but no
aligned_alloc.
Reported by: freqlabs
Diagnosed by: Andrew Gierth <andrew_tao173.riddles.org.uk>
X-MFC-With: r361996
pthread_get_name_np() and pthread_set_name_np().
This re-applies r361770 after compatibility fixes.
Reviewed by: antoine, jkim, markj
Tested by: antoine (exp-run)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
Some environments in which execvPe may be called have a limited amount of
stack available. Currently, it avoidably allocates a segment on the stack
large enough to hold PATH so that it may be mutated and use strsep() for
easy parsing. This logic is now rewritten to just operate on the immutable
string passed in and do the necessary math to extract individual paths,
since it will be copying out those segments to another buffer anyways and
piecing them together with the name for a full path.
Additional size is also needed for the stack in posix_spawnp(), because it
may need to push all of argv to the stack and rebuild the command with sh in
front of it. We'll make sure it's properly aligned for the new thread, but
future work should likely make rfork_thread a little easier to use by
ensuring proper alignment.
Some trivial cleanup has been done with a couple of error writes, moving
strings into char arrays for use with the less fragile sizeof().
Reported by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: jilles, kib, Andrew Gierth
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25038
If execve fails with ENOEXEC, execvp is expected to rebuild the command
with /bin/sh instead and try again.
The previous version did this, but overlooked two details:
argv[0] can conceivably be NULL, in which case memp would never get
terminated. We must allocate no less than three * sizeof(char *) so we can
properly terminate at all times. For the non-NULL argv standard case, we
count all the non-NULL elements and actually skip the first argument, so we
end up capturing the NULL terminator in our bcopy().
The second detail is that the spec is actually worded such that we should
have been preserving argv[0] as passed to execvp:
"[...] executed command shall be as if the process invoked the sh utility
using execl() as follows:
execl(<shell path>, arg0, file, arg1, ..., (char *)0);
where <shell path> is an unspecified pathname for the sh utility, file is
the process image file, and for execvp(), where arg0, arg1, and so on
correspond to the values passed to execvp() in argv[0], argv[1], and so on."
So we make this change at this time as well, while we're already touching
it. We decidedly can't preserve a NULL argv[0] as this would be incredibly,
incredibly fragile, so we retain our legacy behavior of using "sh" for
argv[] in this specific instance.
Some light tests are added to try and detect some components of handling the
ENOEXEC fallback; posix_spawnp_enoexec_fallback_null_argv0 is likely not
100% reliable, but it at least won't raise false-alarms and it did result in
useful failures with pre-change libc on my machine.
This is a secondary change in D25038.
Reported by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: jilles, kib, Andrew Gierth
MFC after: 1 week
Specifically, add LIBUSB_CLASS_PHYSICAL and the libusb_has_capability API.
Descriptions and functionality for these derived from the
documentation at [0]. The current set of capabilities are all supported by
libusb.
These were detected as missing after updating net/freerdp to 2.1.1, which
attempted to use both.
[0] http://libusb.sourceforge.net/api-1.0/group__libusb__misc.html
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25194
Comparing the object files produced by GNU as 2.17.50 and Clang IAS
shows many immaterial changes in strtab etc., and one material change
in .text:
1bac: 4c 8b 4f 18 mov 0x18(%rdi),%r9
1bb0: eb 0e jmp 1bc0 <Skein1024_block_loop>
- 1bb2: 66 66 2e 0f 1f 84 00 data16 nopw %cs:0x0(%rax,%rax,1)
- 1bb9: 00 00 00 00
- 1bbd: 0f 1f 00 nopl (%rax)
+ 1bb2: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
+ 1bb9: 00 00 00
+ 1bbc: 0f 1f 40 00 nopl 0x0(%rax)
0000000000001bc0 <Skein1024_block_loop>:
Skein1024_block_loop():
1bc0: 4c 8b 47 10 mov 0x10(%rdi),%r8
1bc4: 4c 03 85 c0 00 00 00 add 0xc0(%rbp),%r8
That is, GNU as and Clang's integrated assembler use different multi-
byte NOPs for alignment (GNU as emits an 11 byte NOP + a 3 byte NOP,
while Clang IAS emits a 10 byte NOP + a 4 byte NOP).
Dependency cleanup hacks are not required, because we do not create
.depend files from GNU as.
Reviewed by: allanjude, arichardson, cem, tsoome
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8434
r360979 erroneously assumed that the lowest mapping in an address space
would be a file mapping, but of course this is not true in general.
Reported and tested by: Frederic Chardon <chardon.frederic@gmail.com>
MFC after: 3 days
Since we had a .set reorder, the nop after the "jal" was being placed after
the delay slot, resulting in two nops.
While changing this code also guard the .set noreorder with .set push/pop
and use $zero as the cpsetup save register since we don't need to save $gp.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D25025
Copying the approach chosen in r309412. This fixes building the libc tests
on a macOS host since the macOS /bin/dd binary does not support status=none.
As there only seem to be two uses, this commit changes the two Makefiles.
If this becomes more common, we could also add a wrapper bootstrap script
that ignores status= and forwards the remaining args to the real dd.
Another alternative would be to remove the status flag and pipe stderr to
/dev/null, but them we lose error messages.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D24785
description of items residing in a so-called union. FreeBSD currently
only supports 4 such pop levels.
If the push level is not restored within the processing of the same
HID item, an invalid memory location may be used for subsequent HID
item processing.
Verify that the push level is always valid when processing HID items.
Reported by: Andy Nguyen (Google)
MFC after: 3 days
Sponsored by: Mellanox Technologies
At this point, AES is the more common name for Rijndael128. setkey(8)
will still accept the old name, and old constants remain for
compatiblity.
Reviewed by: cem, bcr (manpages)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24964
This commit adds the priv(9) that waters down the sysctl to make it only
allow read(2) of a dirfd by the system root. Jailed root is not allowed, but
jail policy and superuser policy will abstain from allowing/denying it so
that a MAC module can fully control the policy.
Such a MAC module has been written, and can be found at:
https://people.freebsd.org/~kevans/mac_read_dir-0.1.0.tar.gz
It is expected that the MAC module won't be needed by many, as most only
need to do such diagnostics that require this behavior as system root
anyways. Interested parties are welcome to grab the MAC module above and
create a port or locally integrate it, and with enough support it could see
introduction to base. As noted in mac_read_dir.c, it is released under the
BSD 2 clause license and allows the restrictions to be lifted for only
jailed root or for all unprivileged users.
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
Differential Revision: https://reviews.freebsd.org/D24596
Historically, we've allowed read() of a directory and some filesystems will
accommodate (e.g. ufs/ffs, msdosfs). From the history department staffed by
Warner: <<EOF
pdp-7 unix seemed to allow reading directories, but they were weird, special
things there so I'm unsure (my pdp-7 assembler sucks).
1st Edition's sources are lost, mostly. The kernel allows it. The
reconstructed sources from 2nd or 3rd edition read it though.
V6 to V7 changed the filesystem format, and should have been a warning, but
reading directories weren't materially changed.
4.1b BSD introduced readdir because of UFS. UFS broke all directory reading
programs in 1983. ls, du, find, etc all had to be rewritten. readdir() and
friends were introduced here.
SysVr3 picked up readdir() in 1987 for the AT&T fork of Unix. SysVr4 updated
all the directory reading programs in 1988 because different filesystem
types were introduced.
In the 90s, these interfaces became completely ubiquitous as PDP-11s running
V7 faded from view and all the folks that initially started on V7 upgraded
to SysV. Linux never supported this (though I've not done the software
archeology to check) because it has always had a pathological diversity of
filesystems.
EOF
Disallowing read(2) on a directory has the side-effect of masking
application bugs from relying on other implementation's behavior
(e.g. Linux) of rejecting these with EISDIR across the board, but allowing
it has been a vector for at least one stack disclosure bug in the past[0].
By POSIX, this is implementation-defined whether read() handles directories
or not. Popular implementations have chosen to reject them, and this seems
sensible: the data you're reading from a directory is not structured in some
unified way across filesystem implementations like with readdir(2), so it is
impossible for applications to portably rely on this.
With this patch, we will reject most read(2) of a dirfd with EISDIR. Users
that know what they're doing can conscientiously set
bsd.security.allow_read_dir=1 to allow read(2) of directories, as it has
proven useful for debugging or recovery. A future commit will further limit
the sysctl to allow only the system root to read(2) directories, to make it
at least relatively safe to leave on for longer periods of time.
While we're adding logic pertaining to directory vnodes to vn_io_fault, an
additional assertion has also been added to ensure that we're not reaching
vn_io_fault with any write request on a directory vnode. Such request would
be a logical error in the kernel, and must be debugged rather than allowing
it to potentially silently error out.
Commented out shell aliases have been placed in root's chsrc/shrc to promote
awareness that grep may become noisy after this change, depending on your
usage.
A tentative MFC plan has been put together to try and make it as trivial as
possible to identify issues and collect reports; note that this will be
strongly re-evaluated. Tentatively, I will MFC this knob with the default as
it is in HEAD to improve our odds of actually getting reports. The future
priv(9) to further restrict the sysctl WILL NOT BE MERGED BACK, so the knob
will be a faithful reversion on stable/12. We will go into the merge
acknowledging that the sysctl default may be flipped back to restore
historical behavior at *any* point if it's warranted.
[0] https://www.freebsd.org/security/advisories/FreeBSD-SA-19:10.ufs.asc
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
MFC after: 1 month (note the MFC plan mentioned above)
Relnotes: absolutely, but will amend previous RELNOTES entry
Differential Revision: https://reviews.freebsd.org/D24596
for pthread_get_name_np() and pthread_set_name_np(), to be
compatible with Linux.
PR: 238404
Proposed and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
One of the error descriptions referred to permissions; in context the
meaning was probably clear, but the prot values are properly called
protections.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The service handler for fileargs_open() tries to pre-open multiple files
and pass descriptors for each back to the sandboxed process in a single
message. This is to amortize the cost of round-trips between the two
processes.
The service process adds a "cache" nvlist to the reply to "open",
containing file descriptors for pre-opened files. However, when adding
that nvlist to the reply, it was making a copy, effectively leaking the
cached descriptors.
While here, fix spelling in a local variable name.
PR: 241226
Reviewed by: oshogbo
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25095
Because the install location was hardcoded in the Makefile as
/usr/lib/libxo/encoder, the lib32 version was installed over the native
version. Replace /usr/lib with ${LIBDIR}.
Also define SHLIB_NAME instead of LIB + FILES. This prevents building a
static library.
MFC after: 2 weeks
r316063 installed pf's embedded libevent as a private lib, with headers
in /usr/include/private/event. Unfortunately we also have a copy of
libevent v2 included in ntp, which needed to be updated for compatibility
with OpenSSL 1.1.
As unadorned 'libevent' generally refers to libevent v2, be explicit that
this one is libevent v1.
Reviewed by: vangyzen (earlier)
Differential Revision: https://reviews.freebsd.org/D17275
The revision caused libprocstat to have two undefined symbols:
- __start_set_pcpu
- __stop_set_pcpu
probably because of __GLOBL() used in sys/pcpu.h under _KERNEL.
The symbols are not accessed by anything and the linker in base does not
complain about them, but some ports are failing to build.
Hack around the problem by providing definitions for those symbols.
Probably there is a better solution, but I could not think of it yet.
Reported by: zeising
MFC after: 3 days
X-MFC with: r361363
Sponsored by: Panzura
