Firmware.
- Add a temporary disklabel header to boot off a NetBSD/sparc64
partition. This file can be deleted when we have got a FCode
bootblock.
The disklabel header was obtained from NetBSD.
- Use unsigned types for the (32-bit) Open Firmware device handles
to avoid sign extension on 64-bit architectures.
- Add a standard type definition for Open Firmware arguments.
- Flesh out ofw_readin routine.
- Add OpenFirmware load and exec routines.
- Make sure memory allocation for the kernel is done correctly.
- Change the way the heap is allocated so as to make it easier to deallocate
when we hand over.
- Add a command to print memory maps similar to the one for ia64.
With this patch, I can now load and hand over to a kernel on my iMac. There
are some problems with OpenFirmware routines failing after the hand over that
still need to be addressed.
- When the video BIOS is called to clear the region (x, y)-(79, 24)
(by scrolling), the slashed region in Fig.1 is cleared. CD() is
supposed to clear the region shown in Fig.2.
x x
+-------+ +-------+
| | | |
y| ////| y| ////|
| ////| |///////|
| ////| |///////|
+-------+ +-------+
Fig.1 Fig.2
- Don't move the cursor during this operation.
- Be consistent about placing spaces around keywords and
operators; don't mix statements like "if(A==B)" and "if (X == Y)",
"return(0)" and "return (-1)", "P=10" and "Q = 0", etc.
- Consitently indent lines. It's not good to indent by 8 columns
in one part of the file, and by 4 columns in the other part.
is turned off by default and could be enabled by defining LOADER_BZIP2_SUPPORT
make variable. Also make gzip support optional (turned on by default) -
it could be turned off via LOADER_NO_GZIP_SUPPORT make variable.
Please note, that due to limit on the amount of memory available to the
loader(8), it is possible to load modules/kernels compressed with the smallest
block size supported by the bzip2 - 100k (`-1' bzip2(1) option), however
even in this mode bzip2(1) usually provides better compression ratio than
gzip(1) in its best compression mode.
MFC after: 1 month
the ACPI module if the system apperars to be ACPI compliant.
This is an initial cut; the load should really be done by Forth support
code, and we should check both the BIOS build date and a blacklist.
information. The default limits only effect machines with > 1GB of ram
and can be overriden with two new kernel conf variables VM_SWZONE_SIZE_MAX
and VM_BCACHE_SIZE_MAX, or with loader variables kern.maxswzone and
kern.maxbcache. This has the effect of leaving more KVM available for
sizing NMBCLUSTERS and 'maxusers' and should avoid tripups where a sysad
adds memory to a machine and then sees the kernel panic on boot due to
running out of KVM.
Also change the default swap-meta auto-sizing calculation to allocate half
of what it was previously allocating. The prior defaults were way too high.
Note that we cannot afford to run out of swap-meta structures so we still
stay somewhat conservative here.
actual end of the section. The new gas (binutils) puts in additional padding
which was misaligning the concatenated btx loader.
Reported by: Oliver Hartmann <ohartman@klima.physik.uni-mainz.de>,
Harti Brandt <brandt@fokus.gmd.de>
Tested by: Oliver Hartmann <ohartman@klima.physik.uni-mainz.de>,
David Wolfskill <dhw@whistle.com>, ps
Reviewed by: jhb
MFC after: 1 day
the first sector of the emulated floppy to contain a valid MS-DOS BPB that
it can modify. Since boot1 is the first sector of boot.flp, this resulted
in the BIOS overwriting part of boot1: specifically the function used to
read in sectors from the disk.
Submitted by: Mark Peek <mark@whistle.com>
Submitted by: Doug Ambrisko <ambrisko@ambrisko.com>
PR: i386/26382
Obtained from: NetBSD, OpenBSD (the example BPB)
MFC after: 1 month
make(1) wants to build loader.sym *before* the .o files. Eliminating
one seeminly intermediate step avoids the problem. Somehow, it seems
that variables are not getting expanded at the right time.
Any explanations would be appreciated...
Changing:
${BASE}.sym: ${OBJS} ${LIBSTAND} ${LIBFICL} ${LIBALPHA} ${CRT} vers.o
${LD} ...
To:
BASEOBJS= ${OBJS} ${LIBSTAND} ${LIBFICL} ${LIBALPHA} ${CRT} vers.o
${BASE}.sym: ${BASEOBJS}
echo ${BASEOBJS}
${LD} ...
.. the echo only shows LIBFICL, CRT and vers.o. ${OBJS} is not included.
(I'll be we know which compiler and platform they developed this on...)
Minimally change them to C89 comments to make GCC happy. (this is kinda funny
as the file has piece derived from FreeBDS 3.2)
Also fix FreeBSD id style.
page of the image to load section headers and if we let the text section
start at zero, it corrupts the section table when its loaded. With this
change, the loader gets as far as the 'ok' prompt.
they can be used with cell operators like !.
As I did this, I noticed the whole CELL thing might have problems with
big endian architectures with sizeof(int)!=sizeof(void*).
file is processed by passing its name in argv[1]:
return(mod_loadobj(typestr, argv[1]));
however, it is not tested to see if argv[1] actually is defined.
At best, mod_loadobj() near line 244 returns an error like
"can't find 'garbage'" but if the "filename" entered is sufficiently
long, some buffer gets overrun. Of course, "load -t filename" is
actually a typo because we meant to type "load -t mfs_root filename";
nevertheless, a hung machine seems like too harsh a punishment for
such a small typo...
PR: i386/27693
Submitted by: Adrian Steinmann <ast@marabu.ch>
MFC after: 1 week
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.
This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.
This version has a step debugger, which now completely replaces the
old trace feature. Also, we moved all of the FreeBSD-specific MI
code to loader.c, reducing the diff between this and the official
FICL distribution.
fatal trap. Also, reload the GDT register to point to BTX's GDT before
playing around with the segment registers to return to real mode. This is
helpful if the kernel causes a fatal exception before it has setup its own
IDT and fault handlers. For example, if one happens to break mtx_init().
Without these changes BTX would recursively page fault (if paging was not
disabled) or triple fault and reset the CPU (without the GDT reload)
instead of providing a potentially useful register dump.
Reviewed by: rnordier
The release engineer keeps using the wrong /boot/cdboot when creating the
ISO images. So we'll add the 4.0-RELEASE cdboot to the tree until someone
bothers to fix the source so a working `cdboot' is built.
As of this patchset, the loader builds (under NetBSD/macppc), boots, interacts
and talks to BOOTP/NFS servers.
(main.c was moved from boot/ofw/libofw to boot/ofw/common but has no revision
history)
Reviewed by: obrien
This brings the loader up to the point where I can compile it under
NetBSD/macppc and have it boot, interact and talk to NFS servers.
sys/boot/ofw/libofw/main.c has been deleted (it has no revision history) and
replaced with sys/boot/ofw/common/main.c
Reviewed by: obrien
to reinstall boot1 after a 'make world'.
Unfortunately this means that people who have already installed a new
boot1 from a 'make world' after 2000/09/18 *must* reinstall it after
their next build using something like:
# disklabel -B /dev/da0c
expands beyond the limit we will extend the address space before trying
to zero the BSS. This should give us plenty of headroom for modest
expansion of the loader.
Previous revision of this file changed the "boot" commands to take
no arguments from the stack. This is only valid in the case where
a kernel has not been loaded. In that case, load_kernel_and_modules
will be called, which takes a list of arguments from the stack.
When a kernel is presently loaded, though, the list of arguments must
be passed to the boot command, which was the behaviour before the last
revision.
Fix things for both cases.
Noticed by: S-Max and others on that chat room
Taking over the sector following the MBR causes problems on some
machines, and the actual gains are fairly small in terms of how
the space is presently used.
Since we need a number of further features (eg. handling extended
partitions) that can't be readily accommodated in the basic boot0
design anyway, rather choose to implement the additional stuff
separately and concentrate on compatibility rather than features
here.
used by start to find the kernel. Fix this.
Also, boot would proceed immediately in the absence of a path as
argument. Check first if a kernel has already been loaded, and, if
not, fall back to load kernel&modules behavior.
Some further factorizing. I deem this code to be mostly readable by
now! :-)
Many thanks to: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
The boot-conf and boot code had various bugs, and some of it was big,
ugly, unwieldy, and, sometimes, plain incorrect. I'm just about
completely replaced these ugly parts with something much more manageable.
Minor changes were made to the well-factorized parts of it, to accomodate
the new code.
Of note:
* make sure boot-conf has the exact same behavior wrt boot order
as start.
* Correct both boot and boot-conf so they'll work correctly when
compiled in, as they both had some bugs, minor and major.
* Remove all the crud from loader.4th back into support.4th, for
the first time since boot-conf was first improved. Hurray!
I'm fairly satisfied with the code at this time. Time to see about those
man pages...
to make things more interchangeable between it and the FORTH case.
Perhaps requiring the space is a bit too much, but...
Nothing in the tree seems to produce loader.rc files with comment
line, at this time.
as the kernel name. The one very unfortunate consequence is that kernel
as an absolute path loses the priority. It will only be tried after
/boot/${kernel}/${bootfile}. I'll see what can be done about it later.
Load the first of the following kernels to be found:
${kernel} if ${kernel} is an absolute path
/boot/${kernel}/${kernel}
/boot/${kernel}/${bootfile}
${kernel}/${kernel}
${kernel}/${bootfile}
${kernel}
${bootfile}
The last instance of ${kernel} and ${bootfile} will be treated as a
list of semicolon separated file names, and each will be tried in turn,
from left to right.
Also, for each filename loader(8) will try filename, filename.ko,
filename.gz, filename.ko.gz, in that order, but that's not related
to this code.
This resulted in a major reorganization of the code, and much of what
was accumulating on loader.4th was rightly transfered to support.4th.
The semantics of boot-conf and boot also changed. Both will try to load
a kernel the same as above.
After a kernel was loaded, the variable module_path may get changed. Such
change will happen if the kernel was found with a directory prefix. In
that case, the module path will be set to ${directory};${module_path}.
Next, the modules are loaded as usual.
This is intended so kernel="xyzzy" in /boot/loader.conf will load
/boot/xyzzy/kernel.ko, load system modules from /boot/xyzzy/, and
load third party modules from /boot/modules or /modules. If that doesn't
work, it's a bug.
Also, fix a breakage of "boot" which was recently introduced. Boot without
any arguments would fail. No longer. Also, boot will only unload/reload
if the first argument is a path. If no argument exists or the first
argument is a flag, boot will use whatever is already loaded. I hope this
is POLA. That behavior is markedly different from that of boot-conf, which
will always unload/reload.
The semantics introduced here are experimental. Even if the code works,
we might decide this is not the prefered behavior. If you feel so, send
your feedback. (Yeah, this belongs in a HEADS UP or something, but I've
been working for the past 16 hours on this stuff, so gimme a break.)
Now boot-conf can also receive parameters to be passed to the kernel
being booted. The syntax is the same as in the boot command, so one
boots /kernel.OLD in single-user mode by typing:
boot-conf /kernel.OLD -s instead of
boot-conf -s /kernel.OLD
The syntax still supports use of directory instead of file name, so
boot-conf kernel.OLD -s
may be used to boot /boot/kernel.OLD/kernel.ko in single-user mode.
Notice that if one passes a flag to boot-conf, it will override the
flags set in .conf files, but only for that invocation. If the user
aborts the countdown and tries again without passing any flags, the
flags set in .conf files will be used.
Some factorization was done in the process of enhancing boot-conf,
as it has been growing steadly as features are getting added, becoming
too big for a Forth word. It still could do with more factorization,
as a matter of fact.
Override the builtin "boot" with something based on boot-conf. It will
behave exactly like boot-conf, but booting directly instead of going
through autoboot.
Since we are now pairing kernel and module set in the same directory,
this change to boot makes sense.
load the modules needed according to a file relating module names
(actually, _file_ names, not really modules -- the dependency
stuff is not exported to loader's UI) to PnP IDs.
But it still lacks a number of desired features, and it's too crude
for my tastes. But since I don't have time to work on it, it might
be preferable to make it available to those who might. It's not
installed by default, much less loaded. In fact, it wouldn't even
had a copyright message (who? me? assume responsibility for _this_?),
if the cvs commit hadn't aborted for lack of $FreeBSD$, and I decided
to just cut&paste the stuff from elsewhere.
Also, export the file_findfile() function. Again, this is taken from
work in progress but frozen for the time being. Since it works, I'd
rather commit and remove any uglyness later than hide it on my tree.
code into a more modular interface, with hidden vocabularies and
such. Remove the need to a lot of ugly initialization.
Also, add a few structure definitions, from stuff used on the C
part of loader. Some of this will disappear, and the crude structure
support will most likely be replaced by full-blown OOP support
already present on FICL, but not installed by default. But it was
getting increasingly inconvenient to keep this separate on my tree,
and I already lost lots of work once because of the hurdles, so
commit this.
Anyway, it makes support.4th more structured, and I'm not proceeding
with the work on it any time soon, unfortunately.
gets the name from the environment variable kernelname, which is set
when a kernel is loaded. For this reason, autoboot will _first_ try
to load a kernel, and only proceed with the wait prompt after that
succeeds. If it fails, it will abort immediately.
While I understand some may think this behavior undesirable, I think
it is, overall, the best thing to do, even if we do not consider the
aesthetic issue. Notice that anyone using the default loader.rc
already has the kernel loaded before autoboot.
On unload, unset kernelname.
Separate the code that tries to load a kernel from the list of options
to the function loadakernel(). It is used by both boot() and
autoboot().
to allow commonality between varying platforms. This is a step
towards parsing the diskless configuration information with MI code
inside the kernel.
Export the interface hardware address to the kernel, so that it is possible
to determine the boot interface with certainty.
Export the NFS filehandle for the root mount to the kernel, so that the
kernel does not need to perform a mount RPC call.
drives. Some IDE cards don't set propler information into BIOS work
are and their sector size were always recognized as 256 bytes/sector.
Pointed out by: jagarl@creator.club.ne.jp
BOOT_BTX_NOHANG, then BTX will be compiled with the appropriate flags so
that it reboots after a fault instead of hanging forever.
Requested by: ps
Approved by: rnordier
identifier to the DHCP server. Now you can check for this string
in your dhcp configuration to decide whether you will hand out a
lease to the client or not.
to 0x600 via a 'rep movsw'. Once that was done, %cx was zero, so we could
simply use 'movb' to update the lower byte of %cx in preparation for
zeroing out the fake partition entry used to boot to other drives via F5.
Well, in the new boot0, we don't actually relocate ourselves, instead it
is easier to create the fake partition entry first and then just use it to
get the BIOS to load all of boot0 into memory at 0x600. However, since we
aren't doing the relocate code anymore, we don't know that %cx == 0 when
we hit the 'movb' to setup %cx for clearning the fake partition entry.
Thus, if %ch != 0 when the BIOS started boot0, then it would end up zeroing
a lot more memory than just 8 words. The solution is to do a word move of
$8 into %cx.
Debugging help from: David Wolfskill <dhw@whistle.com>
<stand.h>. Also, since bcache_strategy() used to not have a prototype,
arcdisk happily called bcache_strategy() with 6 parameters instead of 7,
leaving out the disk unit number, which is the 2nd parameter. Add in the
unit number to the bcache_strategy() call to fix this.
sector 0 of a disk and boot0.5 is the `boot selector' which starts
from address 0x400. The IPL loads boot0.5 and boot0.5 loads bootblock
of a slice.
The boot manager stuff was developed by me (kato) with Borland C++,
and then, translated into bcc in the ports collection by Nokubi-san.
After that, boot0 has been translated into gas with the .code16
directive by Takahashi-san (nyan) and boot0.5 has been rewritten in
gas by me.
Linux kernel image, and is designed to be dropped into a Linux system
and booted via LILO. Once booted, the user is greeted by the FreeBSD
loader. This still isn't quite complete, as the the root= specification
from LILO isn't currently passed to the loader yet.
- Autodetection and support of the BIOS EDD extensions to work around the
1024 cylinder limit on all but really ancient BIOS's.
- To work around some BIOS's which break when EDD is used with older drives,
we only attempt to use EDD if the cylinder is > 1023.
- Since this new code required more space than we had left, expand boot0 to
2 sectors (1024 bytes) in length.
- Add support for boot0 being multiple sectors using predefined constants.
If boot0 needs to be extended in the future, all that is required is
bumping the NUM_SECTORS constant.
- Now that we have more room to work with, add a few more fs type
descriptions while making others more verbose.
only doing so if loader.rc does not exist. This fixes the problem where
installworld doesn't update /boot/loader.4th, resulting in device.hints not
being loaded after updating past the config(8) changes, which resulted in
mcclock0 not being probed, and a nice kernel panic during boot.
use the BIOS Equipment List to determine how many hard drives are
installed and if the drive number we received in %dl is valid.
- Don't bother to disable interrupts when setting up the stack. The 8086
and beyond implicitly disable interrupts after an instruction that sets
%ss (for example, a pop or a mov) so that you can safely set %ss and %sp
in two consecutive instructions. An exception to this is the lss
instruction, which can set both registers simultaneously and thus doesn't
need this hack.
- Add support for EDD BIOS extensions to support booting off of hard drives
of nearly arbitrary length.
- Add in support for the EDD (Enhanced Disk Drive) BIOS extensions to
use LBA mode for accessing drives past cylinder 1024. This should allow
us to load a kernel from anywhere on a newer drive up to 2 TB. Part
of this came from the PR below.
PR: i386/13847
Submitted by: Tor Egge <Tor.Egge@fast.no>
theory, this should allow the K7V Athlon motherboard to boot ok with boot
virus protection enabled. However, I have no hardware to test this. It
shouldn't break anything though. :)
Prodded by: Kelly Yancey <kbyanc@posi.net>
no clue.
Set sourceid to 0 when booting, which is the correct setting for stdin.
Set sourceid to an arbitrary fd when include'ing, preserving and restoring
the previous sourceid. This is possibly broken(), as 0 is a valid fd. Maybe
we should +1 to this value.
This fixes the version problem widely reported.
is failing for everybody that I have spoken with that has tried it.
FreeBSD/i386 bootstrap loader, Revision 0.8
(root@outback.netplex.com.au, Tue Jun 13 23:26:49 PDT 2000)
Loader version 0.3+ required
Aborted!
start not found
Note that the 0.3+ message is from inside the arch-alpha block, not the
i386 block of code. And even then, 0.8 is higher than 0.3.
This prevents the rest of the loader.conf stuff working. :-/
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
was found or not. Fix it's usage. Alas, it caused no problem before,
besides leaving garbage in the stack, because refill, used by [if]
[else] [then], was broken.
a parameter and dtrt.
Also, make boot-conf always unload first. There wasn't really any
point in not doing this, as the kernel _has_ to be loaded before
any other modules.
Tested by: dwhite
