Commit Graph

130 Commits

Author SHA1 Message Date
Nathan Whitehorn
c529ffef57 Add a simple unaccelerated vt(4) framebuffer driver for Sun framebuffers
handled by creator(4) (Sun Creator 3D, Elite 3D, etc.). This provides
vt(4) consoles on all devices currently supported by syscons on sparc64.
The driver should also be easily adaptable to support newer Sun framebuffers
such as the XVR-500 and higher.

Many thanks to dumbbell@ (Jean-Sebastien Pedron) for testing this remotely
during development.
2014-08-05 18:19:51 +00:00
Gleb Smirnoff
c8d2ffd6a7 Merge all MD sf_buf allocators into one MI, residing in kern/subr_sfbuf.c
The MD allocators were very common, however there were some minor
differencies. These differencies were all consolidated in the MI allocator,
under ifdefs. The defines from machine/vmparam.h turn on features required
for a particular machine. For details look in the comment in sys/sf_buf.h.

As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have
machine/sf_buf.h, which is usually quite small.

Tested by:	glebius (i386), tuexen (arm32), kevlo (arm32)
Reviewed by:	kib
Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-08-05 09:44:10 +00:00
Nathan Whitehorn
190d685037 Add vt(4) support to sparc64. The only driver currently present (ofwfb)
provides support for a variety of low-end graphics hardware (SBus adapters,
Mach64, QEMU's framebuffer, XVR-100). A driver for at least the Creator3D
cards will have to be present before this can become the default console
driver.

To test vt(4) on sparc64, set kern.vty=vt at the loader prompt.
2014-08-02 03:48:16 +00:00
Marius Strobl
8ea3ffb13d Remove ofwfb(4) in order to fix the LINT build breakage caused by r268069.
Both vt(4) and ofwfb(4) need a lot of love to be usable on sparc64 and even
then the performance of ofwfb(4) would suck compared to hardware accelerated
drivers like creator(4) and machfb(4).
2014-07-02 19:46:42 +00:00
Andriy Gapon
f25e50cf0b provide fast versions of ffsl and flsl for i386; ffsll and flsll for amd64
Reviewed by:	jhb
MFC after:	10 days
X-MFC note:	consider thirdparty modules depending on these symbols
Sponsored by:	HybridCluster
2014-02-14 15:18:37 +00:00
Aleksandr Rybalko
27cf7d04ef Merge VT(9) project (a.k.a. newcons).
Reviewed by:	nwhitehorn
MFC_to_10_after:	re approval

Sponsored by:	The FreeBSD Foundation
2013-12-05 22:38:53 +00:00
Davide Italiano
237abf0c56 - Trim an unused and bogus Makefile for mount_smbfs.
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
2013-06-28 21:00:08 +00:00
Alexander Motin
45f6d66569 Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0.  Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam.  Remove the
atacontrol utility and some man pages.  Remove useless now options ATA_CAM.

No objections:	current@, stable@
MFC after:	never
2013-04-04 07:12:24 +00:00
Attilio Rao
2e564269d0 Disconnect non-MPSAFE SMBFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.

In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.

Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.

This is not targeted for MFC.
2012-10-18 12:04:56 +00:00
Konstantin Belousov
aea810386d Implement mechanism to export some kernel timekeeping data to
usermode, using shared page.  The structures and functions have vdso
prefix, to indicate the intended location of the code in some future.

The versioned per-algorithm data is exported in the format of struct
vdso_timehands, which mostly repeats the content of in-kernel struct
timehands. Usermode reading of the structure can be lockless.
Compatibility export for 32bit processes on 64bit host is also
provided. Kernel also provides usermode with indication about
currently used timecounter, so that libc can fall back to syscall if
configured timecounter is unknown to usermode code.

The shared data updates are initiated both from the tc_windup(), where
a fast task is queued to do the update, and from sysctl handlers which
change timecounter. A manual override switch
kern.timecounter.fast_gettime allows to turn off the mechanism.

Only x86 architectures export the real algorithm data, and there, only
for tsc timecounter. HPET counters page could be exported as well, but
I prefer to not further glue the kernel and libc ABI there until
proper vdso-based solution is developed.

Minimal stubs neccessary for non-x86 architectures to still compile
are provided.

Discussed with:	bde
Reviewed by:	jhb
Tested by:	flo
MFC after:	1 month
2012-06-22 07:06:40 +00:00
Peter Wemm
88c7c4348b Allow (with a license warning) "options ZFS" to work in static kernels.
The 'make depend' rules have to use custom -I paths for the special compat
includes for the opensolaris/zfs headers.

This option will pull in the couple of files that are shared with dtrace,
but they appear to correctly use the MODULE_VERSION/MODULE_DEPEND rules
so loader should do the right thing, as should kldload.

Reviewed by:	pjd (glanced at)
2012-03-27 21:23:56 +00:00
Marius Strobl
abef0e6700 For sparc64 also adjust the geometry of da(4) driven disks to not overflow
the 16-bit cylinders field of the VTOC8 disk label (at around 502GB). The
geometry chosen for disks above that limit allows to use disks up to 2TB,
which is the limit of the extended VTOC8 format. The geometry used for
disks smaller than the 16-bit cylinders limit stays the same as used by
cam_calc_geometry(9) for extended translation.
Thanks to Hans-Joerg Sirtl for providing hardware for testing this change.

MFC after:	3 days
2011-11-27 15:43:40 +00:00
Bjoern A. Zeeb
70df4233cd Compile in in_cksum* implementations for both IPv6 and IPv6.
While in_pseudo() etc. is often used in offloading feature support,
in_cksum() is mostly used to fix some broken hardware.

Keeping both around for the moment allows us to compile NIC drivers
even in an IPv6 only environment without the need to mangle them
with #ifdef INETs in a way they are not prepared for.  This will
leave some dead code paths that will not be exercised for IPv6.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	3 days
2011-04-20 12:58:30 +00:00
Marius Strobl
b09c4bd47a - Merge the *_SET macros from fire(4) which generally print out the
register changes when compiled with SCHIZO_DEBUG and take advantage
  of them.
- Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought
  I'd need this for a Sun Fire 3800, which then turned out to not being
  equipped with such a bridge though. The support for these should be
  complete but given that it hasn't actually been tested probing is
  disabled for now.
  This required a way to alter the XMITS configuration in case a PCI-X
  device is found further down the device tree so the sparc64 specific
  ofw_pci kobj was revived with a ofw_pci_setup_device method, which is
  called by the ofw_pcibus code for every device added.
- A closer inspection of the OpenSolaris code indicates that consistent
  DMA flushing/syncing as well as the block store workaround should be
  applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around
  interrupt handlers for devices behind PCI-PCI bridges only as suggested
  by the documentation (code for the latter actually exists in OpenSolaris
  but is disabled by default), which also makes more sense.
- Add a workaround for Casinni/Skyhawk combinations. Chances are that
  this solves the crashes seen when using the the on-board Casinni NICs
  of Sun Fire V480 equipped with centerplanes other than 501-6780 or
  501-6790. This also takes advantage of the ofw_pci_setup_device method.
- Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
Alexander Motin
6c8dd81fa9 Adapt sparc64 and sun4v timer code for the new event timers infrastructure.
Reviewed by:	marius@
2010-07-29 12:08:46 +00:00
Marius Strobl
4461491b3e Change ad_firmware_geom_adjust() to operate on a struct disk * only and
hook it up to ada(4) also. While at it, rename *ad_firmware_geom_adjust()
to *ata_disk_firmware_geom_adjust() etc now that these are no longer
limited to ad(4).

Reviewed by:	mav
MFC after:	3 days
2010-05-20 12:46:19 +00:00
Marius Strobl
5a8336816e Add support for SPARC64 V (and where it already makes sense for other
HAL/Fujitsu) CPUs. For the most part this consists of fleshing out the
MMU and cache handling, it doesn't add pmap optimizations possible with
these CPU, yet, though.
With these changes FreeBSD runs stable on Fujitsu Siemens PRIMEPOWER 250
and likely also other models based on SPARC64 V like 450, 650 and 850.
Thanks go to Michael Moll for providing access to a PRIMEPOWER 250.
2010-05-02 19:38:17 +00:00
Marius Strobl
b901701726 Fix some sorting and whitespace nits. 2010-04-24 16:27:43 +00:00
Marius Strobl
d5dba21cf6 Add sbbc(4), a driver for the BootBus controller found in Serengeti and
StarCat systems which provides time-of-day services for both as well as
console service for Serengeti, i.e. Sun Fire V1280. While the latter is
described with a device type of serial in the OFW device tree, it isn't
actually an UART. Nevertheless the console service is handled by uart(4)
as this allowed to re-use quite a bit of MD and MI code. Actually, this
idea is stolen from Linux which interfaces the sun4v hypervisor console
with the Linux counterpart of uart(4).
2010-04-10 11:52:12 +00:00
Marius Strobl
f00d6a0cc2 Add ssm(4), which serves as a glue device allowing devices beneath the
scalable shared memory node, which is used in large UltraSPARC III based
machines to group snooping-coherency domains together, like schizo(4) to
be treated like nexus(4) children.
2010-02-13 19:05:34 +00:00
Rebecca Cran
ac6be749cd Remove the usb2_input_kbd directive that was missed during the renaming of the drivers in the usb2 stack.
Approved by:	rrs (mentor)
2010-02-08 19:48:33 +00:00
Marius Strobl
5be4c0818e Now that everything required to properly support Sun Fire V215/V245
is in place (r201932 and r202003 were the last parts missing), hook
up fire(4).
2010-01-10 16:04:55 +00:00
Marius Strobl
319570f9c4 Add epic(4), a driver for the front panel LEDs in Sun Fire V215/V245.
It's named after the driver doing the same job in OpenSolaris.
2010-01-10 15:44:48 +00:00
Ed Schouten
9b934d0930 Move libteken out of the syscons directory.
I initially committed libteken to sys/dev/syscons/teken, but now that
I'm working on a console driver myself, I noticed this was not a good
decision. Move it to sys/teken to make it easier for other drivers to
use a terminal emulator.

Also list teken.c in sys/conf/files, instead of listing it in all the
files.arch files separately.
2009-09-03 09:33:57 +00:00
Ed Schouten
802cb57e34 Add memmove() to the kernel, making the kernel compile with Clang.
When copying big structures, LLVM generates calls to memmove(), because
it may not be able to figure out whether structures overlap. This caused
linker errors to occur. memmove() is now implemented using bcopy().
Ideally it would be the other way around, but that can be solved in the
future. On ARM we don't do add anything, because it already has
memmove().

Discussed on:	arch@
Reviewed by:	rdivacky
2009-02-28 16:21:25 +00:00
Andrew Thompson
719085d9d1 Pull in kbd.c with usb2_input_kbd, just like ukbd. 2009-02-15 20:24:21 +00:00
Ed Schouten
b4b1c5169d Replace syscons terminal renderer by a new renderer that uses libteken.
Some time ago I started working on a library called libteken, which is
terminal emulator. It does not buffer any screen contents, but only
keeps terminal state, such as cursor position, attributes, etc. It
should implement all escape sequences that are implemented by the
cons25 terminal emulator, but also a fair amount of sequences that are
present in VT100 and xterm.

A lot of random notes, which could be of interest to users/developers:

- Even though I'm leaving the terminal type set to `cons25', users can
  do experiments with placing `xterm-color' in /etc/ttys. Because we
  only implement a subset of features of xterm, this may cause
  artifacts. We should consider extending libteken, because in my
  opinion xterm is the way to go. Some missing features:

  - Keypad application mode (DECKPAM)
  - Character sets (SCS)

- libteken is filled with a fair amount of assertions, but unfortunately
  we cannot go into the debugger anymore if we fail them. I've done
  development of this library almost entirely in userspace. In
  sys/dev/syscons/teken there are two applications that can be helpful
  when debugging the code:

  - teken_demo: a terminal emulator that can be started from a regular
    xterm that emulates a terminal using libteken. This application can
    be very useful to debug any rendering issues.

  - teken_stress: a stress testing application that emulates random
    terminal output. libteken has literally survived multiple terabytes
    of random input.

- libteken also includes support for UTF-8, but unfortunately our input
  layer and font renderer don't support this. If users want to
  experiment with UTF-8 support, they can enable `TEKEN_UTF8' in
  teken.h. If you recompile your kernel or the teken_demo application,
  you can hold some nice experiments.

- I've left PC98 the way it is right now. The PC98 platform has a custom
  syscons renderer, which supports some form of localised input. Maybe
  we should port PC98 to libteken by the time syscons supports UTF-8?

- I've removed the `dumb' terminal emulator. It has been broken for
  years. It hasn't survived the `struct proc' -> `struct thread'
  conversion.

- To prevent confusion among people that want to hack on libteken:
  unlike syscons, the state machines that parse the escape sequences are
  machine generated. This means that if you want to add new escape
  sequences, you have to add an entry to the `sequences' file. This will
  cause new entries to be added to `teken_state.h'.

- Any rendering artifacts that didn't occur prior to this commit are by
  accident. They should be reported to me, so I can fix them.

Discussed on:	current@, hackers@
Discussed with:	philip (at 25C3)
2009-01-01 13:26:53 +00:00
Nathan Whitehorn
91416fb268 Modularize the Open Firmware client interface to allow run-time switching
of OFW access semantics, in order to allow future support for real-mode
OF access and flattened device frees. OF client interface modules are
implemented using KOBJ, in a similar way to the PPC PMAP modules.

Because we need Open Firmware to be available before mutexes can be used on
sparc64, changes are also included to allow KOBJ to be used very early in
the boot process by only using the mutex once we know it has been initialized.

Reviewed by:    marius, grehan
2008-12-20 00:33:10 +00:00
Nathan Whitehorn
94b4a038a1 Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular,
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.

This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.

Reviewed by:	marius
Obtained from:	sparc64
2008-12-15 15:31:10 +00:00
Sam Leffler
3364462355 Switch to ath hal source code. Note this removes the ath_hal
module; the ath module now brings in the hal support.  Kernel
config files are almost backwards compatible; supplying

device ath_hal

gives you the same chip support that the binary hal did but you
must also include

options AH_SUPPORT_AR5416

to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.
2008-12-01 16:53:01 +00:00
Marius Strobl
20284fcdd9 Add a driver for Schizo' Fireplane/Safari to PCI 2.1 and Tomatillo'
JBus to PCI 2.2 bridges. In theory, this driver should also handle
`XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access
to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
Marius Strobl
794748e37a Remove duplicate entry accidentally introduced with r183202. 2008-09-20 11:34:18 +00:00
Marius Strobl
36543717f7 Some of the assembly files depend on v9a/v9b-only instructions so
compile these with -mcpu=ultrasparc (which is the hard-coded default
of our system compiler), which allows the remainder of the kernel to
be compiled with "only" -mcpu=v9 for reference and testing purposes.
2008-09-20 11:28:42 +00:00
Marius Strobl
9fe27860ff Add drivers for the power management devices found on Fireplane/
Safari- and JBus-based machines. Currently the main purpose of
these drivers is debugging of the resource allocation on nexus(4)
and the register content of these devices though.
2008-09-10 20:22:27 +00:00
Marius Strobl
9888af9c4e Remove clkbrd(4) as a separate device and compile it solely based
on the presence of fhc(4) instead; we by far don't support all of
the functionality provide by the clock board but in general it's
an integral part of FireHose-based systems which shouldn't be
possible to omit.
2008-08-23 14:28:44 +00:00
Marius Strobl
b7ee09f7b0 Remove the MD isa_irq_pending() and the underlying PCI-specific
infrastructure. Its only consumer ever was sio(4) and thus was
unused on sparc64 since removing the last traces of sio(4) in
sparc64 configuration files in favor for uart(4) over three
years ago. If similar functionality is required again it should
be brought back as an MD intr_pending() which works for all
busses by using for example interrupt controller hooks.
2008-04-26 11:01:38 +00:00
Marius Strobl
559921043b The Sun disk label only uses 16-bit fields for cylinders, heads and
sectors so the geometry of large IDE disks has to be adjusted. This
corresponds to what the OpenSolaris dad(7D) driver does except that
the latter only tweaks sectors and effectively limits the mediasize
to 128GB so the cylinders and heads fields won't ever overflow. Not
limiting the mediasize is a compromise between allowing to use Sun
disk label as far as possible and being able to use the entire disk
with another disk label.
This allows to use the full capacity of large IDE disks if they were
not labeled under (Open)Solaris (in both ways of the meaning).

MFC after:	2 weeks
2008-02-11 21:40:22 +00:00
Robert Watson
3c90d1ea74 Break out stack(9) from ddb(4):
- Introduce per-architecture stack_machdep.c to hold stack_save(9).
- Introduce per-architecture machine/stack.h to capture any common
  definitions required between db_trace.c and stack_machdep.c.
- Add new kernel option "options STACK"; we will build in stack(9) if it is
  defined, or also if "options DDB" is defined to provide compatibility
  with existing users of stack(9).

Add new stack_save_td(9) function, which allows the capture of a stacktrace
of another thread rather than the current thread, which the existing
stack_save(9) was limited to.  It requires that the thread be neither
swapped out nor running, which is the responsibility of the consumer to
enforce.

Update stack(9) man page.

Build tested:	amd64, arm, i386, ia64, powerpc, sparc64, sun4v
Runtime tested:	amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
George V. Neville-Neil
b2630c2934 Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
Marius Strobl
f0d8df7bb2 - Move ofw_pci_alloc_busno() to the ofw_pci KOBJ interface,
allowing the driver for the host-PCI-bridge to indicate that
  reenumeration of the PCI busses isn't supported by returning
  -1 instead of a valid PCI bus number. This is needed in order
  support both Tomatillo, which don't support reenumeration and
  thus are apparently intended to be used for independently
  numbered PCI domains only, and Psycho bridges, whose busses
  need to be reenumerated on at least some E450, without the
  #ifndef currently used for sun4v in order to support multiple
  independently PCI domains. The actual allocation/incrementation
  of the PCI bus numbers is now done in psycho(4), though it
  no longer establish a mapping between bus numbers and device
  nodes like ofw_pci_alloc_busno() did as that functionality
  wasn't used (but can easily brought back if really needed).
  The now no longer used sys/sparc64/pci/ofw_pci.c is also
  removed from sys/conf/files.sun4v as ofw_pci_alloc_busno()
  wasn't used there in the first place.
- In ofw_pci_default_{adjust_busrange,intr_pending}() sanity
  check that the device has a parent before passing it on.
- Make psycho_softcs static to sys/sparc64/pci/psycho.c as
  it's not used outside of that module.
- In sys/sparc64/pci/ofw_pcib_subr.c remove the superfluous
  inclusion of opt_global.h and correct the debug output for
  adjusting the subordinate bus number.
2007-06-18 21:49:42 +00:00
Marius Strobl
c54e7ea989 Move the gallant 12 x 22 font data from a .h to a .c so it doesn't need
to be compiled into every driver making use of it. Use a const instance
of struct gfb_font for this as the font isn't intended to be changed at
run-time and in order to accompany the font data with height and width
info.
2007-06-16 21:48:50 +00:00
Marcel Moolenaar
2b39bb4f4f Use default options for default partitioning schemes, rather than
making the relevant files standard. This avoids duplication and
makes it easier to override/disable unwanted schemes. Since ARM
doesn't have a DEFAULTS configuration file, leave the source
files for the BSD and MBR partitioning schemes in files.arm for
now.
2007-06-11 00:38:06 +00:00
Marius Strobl
33368e9fe8 Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
  respective device drivers don't need to figure them out of OFW
  themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
  using IVARs for supplying the OFW node and the subset of standard
  properties of its children. Together with the previous change this
  also allows to fully take advantage of newbus in that drivers like
  fhc(4), which attach on multiple parent busses, no longer require
  different bus front-ends as obtaining the OFW node and properties
  as well as resource allocation works the same for all supported
  busses. As such this change also is part 4/4 of allowing creator(4)
  to work in USIII-based machines as it allows this driver to attach
  on both nexus(4) and upa(4). On the other hand removing these IVARs
  breaks API compatibility with the powerpc nexus(4) but which isn't
  that bad as a) sparc64 currently doesn't share any device driver
  hanging off of nexus(4) with powerpc and b) they were no longer
  compatible regarding OFW-related extensions at the pci(4) level
  since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
  order to handle DMA tags in a hierarchical way and get rid of the
  sparc64_root_dma_tag kludge. Together with the previous two items
  this changes also allows to completely get rid of the nexus(4)
  IVAR interface. It also includes:
  - pushing the constraints previously specified by the nexus_dmatag
    down into the DMA tags of psycho(4) and sbus(4) as it's their
    IOMMUs which induce these restrictions (and nothing at the
    nexus(4) or anything that would warrant specifying them there),
  - fixing some obviously wrong constraints of the psycho(4) and
    sbus(4) DMA tags, which happened to not actually be used with
    the sparc64_root_dma_tag kludge in place and therefore didn't
    cause problems so far,
  - replacing magic constants for constraints with macros as far
    as it is obvious as to where they come from.
  This doesn't include taking advantage of the newbus way to get
  the parent DMA tags implemented by this change in order to divorce
  the IOTSBs of the PCI and SBus IOMMUs or for implementing the
  workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
  yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
  by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
  from ofw_upa.h) and renaming its content, which actually applies to
  all of Fireplane/Safari, JBus and UPA (in the host bus case), as
  appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
  allocating the device info for the children of nexus(4). This is
  done in order to not need to export M_NEXUS when deriving drivers
  for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
  we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
  as add 'associations' and 'rsc', which are pseudo-devices without
  resources and therefore of no real interest for nexus(4), to the
  former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
  space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
  Fireplane/Safari- and JBus-based machines use multiple ranges,
  which can't be as easily divided as in the case of UPA (limiting
  the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
  for children of nexus(4) in order to give one less opportunity
  for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
  change them to take advantage of rman_get_rid() instead of caching
  the RIDs assigned to allocated resources, now that the RIDs of
  resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
  actually became outdated in several places, in panic strings and
  status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
  sbus(4) as I changed considerable amounts of these drivers as well
  as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.

Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.

PR:		76052 [1]
Approved by:	re (kensmith)
2007-03-07 21:13:51 +00:00
Marius Strobl
0222c13479 Add front-ends for the 'lebuffer' variants found on some SBus cards.
These are shared-memory variants based on Am79C90-compatible chips
that apart from the missing DMA engine are similar to the 'ledma'
variant including using a (pseudo-)bus/device for the buffer that
the actual LANCE device hangs off from. The performance of these is
close to that of the 'ledma' one, like expected at a few times the
CPU load though.
2007-01-20 12:53:30 +00:00
Marius Strobl
0855a1ba50 Resurrect upa(4), now used for the subordinate/slave UPA bridge and
bus hanging off from the Fireplane/Safari bus in some USIII machines.
This is part 3/4 of allowing creator(4) to work in these machines.
The little info needed on how to configure the bridge and to work
around the incorrect values contained in the `interrupts' properties
of its children were obtained form OpenSolaris.
2007-01-16 22:08:27 +00:00
Marius Strobl
d3fc12aff9 - Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
  which at that time had a mainbus(4) (for USI/II machines, which use
  an UPA interconnection bus as the nexus) and an upa(4) (for USIII
  machines, which use a subordinate/slave UPA bus hanging off from the
  Fireplane/Safari interconnection bus) front-end. With FreeBSD and
  newbus there is/will be no need to have two separate bus front-ends
  for these busses, so we can easily coallapse the shared front-end
  and the back-end into a single source file (note that the FreeBSD
  creator_upa.c was misnomer anyway; based on what it actually attached
  to that should have been creator_nexus.c), actually OpenBSD meanwhile
  also has moved to a shared front-end and a single source file. Due
  to the low-level console support creator.c also wasn't free from bus
  related things before.
  While at it, also split sys/sparc64/creator/creator.h into a
  sys/dev/fb/creatorreg.h that only contains register macros and move
  the structures to the top of sys/dev/fb/creator.c as suggested by
  style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
  handles for the low-level console support instead of hardcoding
  support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
  of allowing creator(4) to work in USIII machines (which have a UPA
  bus hanging off from the Fireplane/Safari bus reflected by the nexus),
  which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
  creator(4) is used as for the low-level console and thus the required
  bus tags and handles have been already obtained or not so the resources
  are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
  support as well as allocating the corresponding resources in the
  regular bus attach routine don't bother to get all for the maximum of
  24 register banks but only (for) the two tag/handle pairs required for
  providing the video interface for syscons(4) support. If we can't
  allocate the rest of them just limit the memory range accessible via
  creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
  and the resources in between as far as possible, as the XFree86/Xorg
  sunffb(4) expects to be able to access the whole region, even though
  the backing resources are actually non-continuous. Limit and check
  the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
  need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
  macros for consistency, add macros for the remaining register banks
  for completeness.
2007-01-16 21:08:22 +00:00
Matt Jacob
2c298b17e3 opt_ah.h ends up copied into a kernelcompile directory in some
aches as a read-only file. In a number of cases this has led to
compiles failing- usually due to some strange NFS drift which thinks
that the opt_ah.h in the compile directory is out of date wrt the
source it is copied from. When the copy is executed again, it fails
because the target is read-only. Oops. Modify the compile hooks
avoid this.

Discussed with a while back with:	Sam Leffler
2006-12-18 05:45:23 +00:00
Marius Strobl
65deb9d947 - In sunkbd_probe_keyboard() don't bother to determine the keyboard layout
as we have no use for that info. Instead let this function return the
  keyboard ID and verify at its invocation in sunkbd_configure() that we're
  talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this
  driver.
- Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective
  code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to
  emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by
  kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also
  triggers the use of AT keyboard maps and thus allows to use the map files
  in share/syscons/keymaps with this driver at the cost of an additional
  translation (in ukbd(4) this just is the way of operation).
- Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options
  of the other keyboard drivers allows to specify the default in-kernel
  keyboard map. For obvious reasons this made to only work when also using
  SUNKBD_EMULATE_ATKBD.
- Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(),
  which are also required for interoperability with kbdmux(4).
- Implement K_CODE mode and FreeBSD keypad compose.
- As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD
  case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than
  having to duplicate it and #ifdef some more code.
- Don't use the TX-buffer for writing the two command bytes for setting the
  keyboard LEDs as this consequently requires a hardware FIFO that is at
  least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't
  have. Thus use an inlined version of uart_putc() to consecutively write
  the command bytes (a cleaner approach would be to do this via the soft
  interrupt handler but that variant wouldn't work while in ddb(4)). [1]
- Fix some minor style(9) bugs.

PR:		90316 [1]
Reviewed by:	marcel [1]
2006-11-02 00:01:15 +00:00
Ruslan Ermilov
837f167eb2 Move "device splash" back to MI NOTES and "files", it's MI. 2006-10-23 13:23:14 +00:00
Ruslan Ermilov
663cf7fed2 Move MI parts of syscons into MI "files". 2006-10-23 13:05:01 +00:00