Commit Graph

53 Commits

Author SHA1 Message Date
Ruslan Ermilov
0be33d3321 The .s files were repo-copied to .S files.
Approved by:	marcel
Repocopied by:	joe
2003-07-02 12:57:07 +00:00
Marcel Moolenaar
f2c49dd248 Revamp of the syscall path, exception and context handling. The
prime objectives are:
o  Implement a syscall path based on the epc inststruction (see
   sys/ia64/ia64/syscall.s).
o  Revisit the places were we need to save and restore registers
   and define those contexts in terms of the register sets (see
   sys/ia64/include/_regset.h).

Secundairy objectives:
o  Remove the requirement to use contigmalloc for kernel stacks.
o  Better handling of the high FP registers for SMP systems.
o  Switch to the new cpu_switch() and cpu_throw() semantics.
o  Add a good unwinder to reconstruct contexts for the rare
   cases we need to (see sys/contrib/ia64/libuwx)

Many files are affected by this change. Functionally it boils
down to:
o  The EPC syscall doesn't preserve registers it does not need
   to preserve and places the arguments differently on the stack.
   This affects libc and truss.
o  The address of the kernel page directory (kptdir) had to
   be unstaticized for use by the nested TLB fault handler.
   The name has been changed to ia64_kptdir to avoid conflicts.
   The renaming affects libkvm.
o  The trapframe only contains the special registers and the
   scratch registers. For syscalls using the EPC syscall path
   no scratch registers are saved. This affects all places where
   the trapframe is accessed. Most notably the unaligned access
   handler, the signal delivery code and the debugger.
o  Context switching only partly saves the special registers
   and the preserved registers. This affects cpu_switch() and
   triggered the move to the new semantics, which additionally
   affects cpu_throw().
o  The high FP registers are either in the PCB or on some
   CPU. context switching for them is done lazily. This affects
   trap().
o  The mcontext has room for all registers, but not all of them
   have to be defined in all cases. This mostly affects signal
   delivery code now. The *context syscalls are as of yet still
   unimplemented.

Many details went into the removal of the requirement to use
contigmalloc for kernel stacks. The details are mostly CPU
specific and limited to exception_save() and exception_restore().
The few places where we create, destroy or switch stacks were
mostly simplified by not having to construct physical addresses
and additionally saving the virtual addresses for later use.

Besides more efficient context saving and restoring, which of
course yields a noticable speedup, this also fixes the dreaded
SMP bootup problem as a side-effect. The details of which are
still not fully understood.

This change includes all the necessary backward compatibility
code to have it handle older userland binaries that use the
break instruction for syscalls. Support for break-based syscalls
has been pessimized in favor of a clean implementation. Due to
the overall better performance of the kernel, this will still
be notived as an improvement if it's noticed at all.

Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
Marcel Moolenaar
b1c4ed2222 Sort lines. 2003-04-29 05:38:41 +00:00
Poul-Henning Kamp
daabb372ca Separate the encoding/decoding functions for struct disklabel into a
separate source file which can be used from both kernel and userland code.
2003-04-17 07:39:03 +00:00
Poul-Henning Kamp
6e03422af0 Move the functions for encoding decoding struct dos_partition into
a separate .c file so they can be used from userland as well.
2003-04-12 08:34:40 +00:00
Ruslan Ermilov
5d1b6a85bc Standardize handling of locore.[sS] etc. files.
Submitted by:	jake, bde, ru
2003-02-28 21:59:14 +00:00
Marcel Moolenaar
dc00c828e3 Remove special casing for running in the simulator from the kernel
and instead add platform, firmware and EFI stubs to the loader.
The net effect of this change is that besides a special console and
disk driver, the kernel has no knowledge of the simulator. This has
the following advantages:
o  Simulator support is much harder to break,
o  It's easier to make use of more feature complete simulators.
   This would only need a change in the simulator specific loader,
o  Running SMP kernels within the simulator. Note that ski at this
   time does not simulate IPIs, so there's no way to start APs.

The platform, firmware and EFI stubs describe the following hardware:
o  4 CPU Itanium,
o  128 MB RAM within the 4GB address space,
o  64 MB RAM above the 4GB address space.

NOTE: The stubs in the skiloader describe a machine that should in
parts be defined by the simulator. Things like processor interrupt
block and AP wakeup vector cannot be choosen at random because they
require interpretation by the simulator. Currently the simulator is
ignorant of this.

This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS
which is ignored by the simulator.

Tested with: ski (version 0.943 for linux)
2003-02-01 22:50:09 +00:00
Poul-Henning Kamp
30b745b6ed Remove entries for files we don't have.
Approved by:	peter
2003-01-30 06:26:17 +00:00
Poul-Henning Kamp
a025fbfdc6 NO_GEOM cleanup: subr_disklabel.c no longer needed. 2003-01-28 14:51:32 +00:00
Poul-Henning Kamp
f527e9857e ia64 didn't need subr_diskslice.c and subr_diskmbr.c either. 2003-01-17 22:09:12 +00:00
Poul-Henning Kamp
2a2c796213 Move subr_disklabel.c and subr_diskslice.c from being MI to MD files,
so that they can be left out where they are unneeded.
2003-01-17 18:32:39 +00:00
Jake Burkholder
a360a43dd5 Improve the way that an elf image activator for an alternate word size is
included in the kernel.  Include imgact_elf.c in conf/files,  instead of
both imgact_elf32.c and imgact_elf64.c, which will use the default word
size for an architecture as defined in machine/elf.h.  Architectures that
wish to build an additional image activator for an alternate word size can
include either imgact_elf32.c or imgact_elf64.c in files.${ARCH}, which
allows it to be dependent on MD options instead of solely on architecture.

Glanced at by:	peter
2003-01-04 22:07:48 +00:00
John Baldwin
d2ec391b39 Rename 'device acpica' to 'device acpi'.
Approved by:	msmith, iwasaki
2002-10-24 19:05:04 +00:00
Marcel Moolenaar
628d99be0d Make the unwind functions standard and not optional on ddb. They
will eventually be used for ktrace(2) too.
2002-10-19 04:02:16 +00:00
Peter Wemm
ffd6bca040 geom_mbr.c and geom_bsd.c would be kinda useful here too, at least
for a while.
2002-10-10 00:58:23 +00:00
Poul-Henning Kamp
3bd6561289 NB: This commit does *NOT* make GEOM the default in FreeBSD
NB: But it will enable it in all kernels not having options "NO_GEOM"

Put the GEOM related options into the intended order.

Add "options NO_GEOM" to all kernel configs apart from NOTES.

In some order of controlled fashion, the NO_GEOM options will be
removed, architecture by architecture in the coming days.

There are currently three known issues which may force people to
need the NO_GEOM option:

boot0cfg/fdisk:
        Tries to update the MBR while it is being used to control
        slices.  GEOM does not allow this as a direct operation.

SCSI floppy drives:
        Appearantly the scsi-da driver return "EBUSY" if no media
        is inserted.  This is wrong, it should return ENXIO.

PC98:
        It is unclear if GEOM correctly recognizes all variants of
        PC98 disklabels.  (Help Wanted!  I have neither docs nor HW)

These issues are all being worked.

Sponsored by:	DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
Sam Leffler
8b7ce2ff52 hookup new crypto support to the config/build process 2002-10-04 20:42:36 +00:00
Peter Wemm
5452db4885 de-count atkbdc and sc. Folks, remove the '1' from 'device sc 1' and
'device atkbdc 1'.
2002-08-19 23:59:21 +00:00
John Baldwin
ba268f0312 Move sio_isa.c back to MD files files due to PC98 brain damage. 2002-07-24 12:35:52 +00:00
Peter Wemm
3ebc124838 Infrastructure tweaks to allow having both an Elf32 and an Elf64 executable
handler in the kernel at the same time.  Also, allow for the
exec_new_vmspace() code to build a different sized vmspace depending on
the executable environment.  This is a big help for execing i386 binaries
on ia64.   The ELF exec code grows the ability to map partial pages when
there is a page size difference, eg: emulating 4K pages on 8K or 16K
hardware pages.

Flesh out the i386 emulation support for ia64.  At this point, the only
binary that I know of that fails is cvsup, because the cvsup runtime
tries to execute code in pages not marked executable.

Obtained from:  dfr (mostly, many tweaks from me).
2002-07-20 02:56:12 +00:00
John Baldwin
bdff575a42 Move all the sio(4) attachments (except for pc98's cbus attachment) to the
MI files file.  We can't move sio.c because pc98 uses a custom version.
2002-07-15 15:47:34 +00:00
Jake Burkholder
60b22c6d62 ${MACHINE_ARCH}dump.c -> dump_machdep.c. 2002-05-13 02:40:21 +00:00
Marcel Moolenaar
4ee5409b54 Add mca.c. 2002-04-28 08:43:47 +00:00
Doug Rabson
989db74d57 Add IA32 option for emulation of i386 binaries on the ia64 platform. 2002-04-10 19:35:50 +00:00
Marcel Moolenaar
561419e427 Actually have ia64dump.c be included in the build. Can't be bad. 2002-04-03 04:42:14 +00:00
Matthew Dillon
d74ac6819b Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit().  Cleanup the td_savecrit field by moving it
from MI to MD.  Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).

Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections.  This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.

This is the stage-1 commit.  Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways.  This should
be temporary.

Reviewed by:	core
Approved by:	core
2002-03-27 05:39:23 +00:00
Hajimu UMEMOTO
b5a8f767a6 - Speedup 3DES by using assembly code for i386.
- Sync des/blowfish to more recent openssl.

Obtained from:	KAME/NetBSD
MFC after:	2 weeks
2002-03-05 09:19:02 +00:00
Thomas Moestl
90ce56c287 Add the following functions/macros to support byte order conversions and
device drivers for bus system with other endinesses than the CPU (using
interfaces compatible to NetBSD):

- bwap16() and bswap32(). These have optimized implementations on some
  architectures; for those that don't, there exist generic implementations.
- macros to convert from a certain byte order to host byte order and vice
  versa, using a naming scheme like le16toh(), htole16().
  These are implemented using the bswap functions.
- stream bus space access functions, which do not perform a byte order
  conversion (while the normal access functions would if the bus endianess
  differs from the CPU endianess).

htons(), htonl(), ntohs() and ntohl() are implemented using the new
functions above for kernel usage. None of the above interfaces is currently
exported to user land.

Make use of the new functions in a few places where local implementations
of the same functionality existed.

Reviewed by:	mike, bde
Tested on alpha by:	mike
2002-02-27 17:16:18 +00:00
Warner Losh
cf17adf0a9 OLDCARD isn't supported on alpha or ia64, so don't pretend that it is by
including it.
2001-10-30 14:53:36 +00:00
Warner Losh
e282bb41f0 Don't try to use sio with NEWCARD 16 bit yet. It eats all pccards :-)
Reported by: Marcell Moolenaar
2001-10-30 14:49:29 +00:00
Doug Rabson
7a71eab18d Add unwind.c. 2001-10-29 12:04:51 +00:00
Mitsuru IWASAKI
f86214b6b8 Add APM compatibility feature to ACPI.
This emulates APM device node interface APIs (mainly ioctl) and
provides APM services for the applications.  The goal is to support
most of APM applications without any changes.
Implemented ioctls in this commit are:
 - APMIO_SUSPEND (mapped ACPI S3 as default but changable by sysctl)
 - APMIO_STANDBY (mapped ACPI S1 as default but changable by sysctl)
 - APMIO_GETINFO and APMIO_GETINFO_OLD
 - APMIO_GETPWSTATUS

With above, many APM applications which get batteries, ac-line
info. and transition the system into suspend/standby mode (such as
wmapm, xbatt) should work with ACPI enabled kernel (if ACPI works well :-)

Reviewed by:	arch@, audit@ and some guys
2001-10-26 17:43:05 +00:00
Warner Losh
2ce87d3448 Break out the bus front ends into their own files. Rewrite
sio_pccard_detach to use new siodetach.  Add an extra arg to sioprobe
to tell driver to probe/not probe the device for IRQs.

This incorporates most of Bruce's review material.  I'm at a good
checkpoint, but there will be more to come based on bde's further
reviews.

Reviewed by: bde
2001-10-23 15:17:33 +00:00
Warner Losh
d75c1b4a90 First commit after a repo copy of isa/sio* -> dev/sio:
Move sio from isa/sio.c to dev/sio/sio.c.  The next step is to break
out the front end attachments, improve support for these parts on
different busses, and maybe, if we're lucky, merging in pc98 support.
It will also be MI and live in conf/files rather than files.*.

Approved by: bde
Tested with: i386, pc98
2001-10-22 02:48:38 +00:00
Dag-Erling Smørgrav
7c62990641 Move procfs_* from procfs_machdep.c into sys_process.c, and rename them to
proc_* in the process; procfs_machdep.c is no longer needed.

Run-tested on i386, build-tested on Alpha, untested on other platforms.
2001-10-21 23:57:24 +00:00
Doug Rabson
ccd97ec1f2 Add unaligned.c and delete commented out entry for userconfig.c 2001-10-19 22:25:00 +00:00
Doug Rabson
8022a260d2 Remove nexus_pcib.c. 2001-10-06 10:09:14 +00:00
Peter Wemm
c4d33a56b1 Add ia64/ia64/sapic.c 2001-10-06 02:03:00 +00:00
Doug Rabson
56c0b43aab Add eficlock.c and remove sscclock.c. 2001-10-04 15:28:56 +00:00
Doug Rabson
5f926293f0 Add a couple of low-level acpi support files. 2001-10-04 08:45:54 +00:00
Doug Rabson
9d3b72ece5 Add various file relating to firmware interfaces and make SKI support
optional.
2001-09-29 11:46:22 +00:00
Doug Rabson
093a61588e Add a working version of setjmp/longjmp.
Obtained from: Intel's EFI toolkit.
2001-09-03 13:54:50 +00:00
Kazutaka YOKOTA
2fe5e0b184 Use #ifdef DEV_SPLASH (from opt_splash.h) rather than
#if NSPLASH > 0 (from splash.h) to test the presence
of the splash driver.
2001-08-02 13:22:33 +00:00
Peter Wemm
2398f0cd1d Hints overhaul:
- Replace some very poorly thought out API hacks that should have been
  fixed a long while ago.
- Provide some much more flexible search functions (resource_find_*())
- Use strings for storage instead of an outgrowth of the rather
  inconvenient temporary ioconf table from config().  We already had a
  fallback to using strings before malloc/vm was running anyway.
2001-06-12 09:40:04 +00:00
John Baldwin
6caa8a1501 Overhaul of the SMP code. Several portions of the SMP kernel support have
been made machine independent and various other adjustments have been made
to support Alpha SMP.

- It splits the per-process portions of hardclock() and statclock() off
  into hardclock_process() and statclock_process() respectively.  hardclock()
  and statclock() call the *_process() functions for the current process so
  that UP systems will run as before.  For SMP systems, it is simply necessary
  to ensure that all other processors execute the *_process() functions when the
  main clock functions are triggered on one CPU by an interrupt.  For the alpha
  4100, clock interrupts are delievered in a staggered broadcast fashion, so
  we simply call hardclock/statclock on the boot CPU and call the *_process()
  functions on the secondaries.  For x86, we call statclock and hardclock as
  usual and then call forward_hardclock/statclock in the MD code to send an IPI
  to cause the AP's to execute forwared_hardclock/statclock which then call the
  *_process() functions.
- forward_signal() and forward_roundrobin() have been reworked to be MI and to
  involve less hackery.  Now the cpu doing the forward sets any flags, etc. and
  sends a very simple IPI_AST to the other cpu(s).  AST IPIs now just basically
  return so that they can execute ast() and don't bother with setting the
  astpending or needresched flags themselves.  This also removes the loop in
  forward_signal() as sched_lock closes the race condition that the loop worked
  around.
- need_resched(), resched_wanted() and clear_resched() have been changed to take
  a process to act on rather than assuming curproc so that they can be used to
  implement forward_roundrobin() as described above.
- Various other SMP variables have been moved to a MI subr_smp.c and a new
  header sys/smp.h declares MI SMP variables and API's.   The IPI API's from
  machine/ipl.h have moved to machine/smp.h which is included by sys/smp.h.
- The globaldata_register() and globaldata_find() functions as well as the
  SLIST of globaldata structures has become MI and moved into subr_smp.c.
  Also, the globaldata list is only available if SMP support is compiled in.

Reviewed by:	jake, peter
Looked over by:	eivind
2001-04-27 19:28:25 +00:00
Peter Wemm
8ab109d131 Remove count for NSIO. The only places it was used it were incorrect.
(alpha-gdbstub.c got sync'ed up a bit with the i386 version)
2001-01-31 10:54:45 +00:00
Peter Wemm
1467a651ab Convert apm from a bogus 'count' into a plain option. Clean out some
other cruft from the files.alpha and files.ia64 that were related to this.
2001-01-19 14:09:54 +00:00
Peter Wemm
a496358e30 Remove the now-empty ipl_funcs.c file on all platforms. 2001-01-19 09:59:56 +00:00
Mike Smith
78531822bb Don't build the ACPI CA debugger unless the ACPI_DEBUG option is present.
Only build the IA32 support on i386.  Build the IA64 support on IA64.
2000-11-08 02:57:01 +00:00
John Baldwin
36412d79b4 - Make the mutex code almost completely machine independent. This greatly
reducues the maintenance load for the mutex code.  The only MD portions
  of the mutex code are in machine/mutex.h now, which include the assembly
  macros for handling mutexes as well as optionally overriding the mutex
  micro-operations.  For example, we use optimized micro-ops on the x86
  platform #ifndef I386_CPU.
- Change the behavior of the SMP_DEBUG kernel option.  In the new code,
  mtx_assert() only depends on INVARIANTS, allowing other kernel developers
  to have working mutex assertiions without having to include all of the
  mutex debugging code.  The SMP_DEBUG kernel option has been renamed to
  MUTEX_DEBUG and now just controls extra mutex debugging code.
- Abolish the ugly mtx_f hack.  Instead, we dynamically allocate
  seperate mtx_debug structures on the fly in mtx_init, except for mutexes
  that are initiated very early in the boot process.   These mutexes
  are declared using a special MUTEX_DECLARE() macro, and use a new
  flag MTX_COLD when calling mtx_init.  This is still somewhat hackish,
  but it is less evil than the mtx_f filler struct, and the mtx struct is
  now the same size with and without mutex debugging code.
- Add some micro-micro-operation macros for doing the actual atomic
  operations on the mutex mtx_lock field to make it easier for other archs
  to override/optimize mutex ops if needed.  These new tiny ops also clean
  up the code in some places by replacing long atomic operation function
  calls that spanned 2-3 lines with a short 1-line macro call.
- Don't call mi_switch() from mtx_enter_hard() when we block while trying
  to obtain a sleep mutex.  Calling mi_switch() would bogusly release
  Giant before switching to the next process.  Instead, inline most of the
  code from mi_switch() in the mtx_enter_hard() function.  Note that when
  we finally kill Giant we can back this out and go back to calling
  mi_switch().
2000-10-20 07:26:37 +00:00