Commit Graph

403 Commits

Author SHA1 Message Date
David Greenman
4364e32501 Changed ttyc? and cuac? specifications to support multiple controllers.
A "MAKEDEV ttyc0" now creates 32 units for controller 0, ttyc1 for
controller 1, etc..
1996-10-13 01:12:01 +00:00
Andrey A. Chernov
02601dae20 Remove sleep before moused, problem fixed with new consolectl device 1996-09-09 19:59:14 +00:00
Søren Schmidt
a41cbc45be Fix for the problem that moused hangs if it is started from /etc/rc
Introduces the /dev/consolectl device for controlling various
console related things (given syscons is used).
1996-09-09 18:47:47 +00:00
Andrey A. Chernov
d71651da35 Use the same perm/owner for sysmouse as for others mouse devices 1996-09-09 00:02:44 +00:00
Andrey A. Chernov
814c1905ad Make sysmouse device for syscons 1996-09-08 23:56:27 +00:00
Andrey A. Chernov
87dc1283f8 Make moused actually work:
add sleep 20 before moused starts.
It allows all getties to activate screens.
1996-09-07 19:04:48 +00:00
Wolfram Schneider
c4a87a6a59 update comment for tun*
add comment for snp*
1996-07-02 23:11:06 +00:00
Andrey A. Chernov
97f6903efd Add moused hooks (OFF by default) 1996-06-23 20:54:42 +00:00
Andrey A. Chernov
62d543821c IDE cd fixes:
wcd?a is missing
wrong partition number was used for wcd?c
1996-06-07 15:47:15 +00:00
Satoshi Asami
a388db6b9e Bring in ccd support.
Entry to create ccd devices.
1996-05-03 05:37:34 +00:00
Jordan K. Hubbard
582af1726d Add wcd0 to `all' target. The fate of the IDE CDROM support in 2.2
is becoming clearer.. :-)
1996-05-02 09:15:57 +00:00
Garrett Wollman
a98d68cf25 Provide for creation of /dev/perfmon. 1996-03-26 21:04:54 +00:00
Jordan K. Hubbard
9ab75783da Fix Nate's spamming of this file - every backquote needs a matching one.. :-) 1996-03-19 03:48:53 +00:00
Nate Williams
3b9fa99df2 Added some comments regarding the apm device, and added support to
create the PC-CARD devices.

Note: The APM character special device is named /dev/apm and not apm0 as
was prvioiusly since only one APM device can exist in a system at a time
according to the the APM specifications.
1996-03-18 20:28:27 +00:00
Paul Traina
869fc587ed Add support for Connectix QuickCam(tm) 1996-02-02 19:25:24 +00:00
Mike Pritchard
440cac3e51 Another round of spelling fixes. 1996-01-31 15:03:18 +00:00
Bruce Evans
6a188c276a Use umask disk_umask=037 for all (writable) disks. Use umask
tape_umask=017 for all tapes.  This has a significant effect only
for ft and st (they were created with the wrong umask 002 and then
chmod'ed to mode 640; now they are created with mode 660).

Chmod the st control devices (mode 3) to 600.  These need to be
more secure than the st i/o devices, but were less secure.

Use the default umask of 077 for joy0.  002 gave mode 664, which
is insecure.

Use umask 037 for ch*.  Cosmetic.

Removed redundant chmod's.

Sorted case lists for disks.
1996-01-28 19:10:37 +00:00
Jordan K. Hubbard
9372c90cc2 Add an entry for MTA-3230 3.5" magneto-optical drives.
Submitted by:	jbryant@argus.flash.net
1996-01-15 13:17:52 +00:00
Joerg Wunsch
0ac727259c Restrict /dev/io perms to 0600. 1995-12-31 09:30:30 +00:00
Peter Wemm
6065a0be11 This commit was generated by cvs2svn to compensate for changes in r13122,
which included commits to RCS files with non-trunk default branches.
1995-12-30 19:02:48 +00:00
Peter Wemm
a5b996a7ec recording cvs-1.6 file death 1995-12-30 19:02:48 +00:00
Mark Murray
7d2bdadb5b Move the creation of the *random devices to the same "target" as the
rest of the memory group - std. Also correct the permissions so as not
to force a security hole. If /dev/*random have the permission 640 and
ownership bin.kmem, it forces applications that need random numbers
to be at least SGID. Picture the scene of a SGID PGP being able to
read /dev/kmem!
1995-12-03 17:26:21 +00:00
Garrett Wollman
c7704e9ce0 Uniformize startup display to follow style of all the others. This means
in particular getting rid of most of the goop that causes syscons options
to be spread out over four separate lines.
1995-11-29 20:40:36 +00:00
Mark Murray
a2c9d3c290 Fix stupid typo.
Pointed out by: Mark Valentine
1995-11-14 06:24:00 +00:00
Mark Murray
cceb2049b4 OOps, nearly missed this bit. Add the call to rndcontrol to set the
chosen interrupts for the entropy gathering  in /dev/random.
1995-11-13 21:33:04 +00:00
Bruce Evans
2226a9e686 Add random and urandom. 1995-10-29 15:52:31 +00:00
Peter Wemm
6bb214cdc6 Part 2 of the linux LKM hook, and use the new screen saver entry
points in the modload, as enforced by the recent symorder and
bsd.kmod.mk changes..
1995-10-28 12:44:13 +00:00
Bruce Evans
d416cc848a Update Digiboard entries.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-10-17 16:26:54 +00:00
Joerg Wunsch
a7f096115f Make the options for newfs'ing floppies more specific; the prvious
example without optios would create floppies that waste half of their
space in i-node areas. :)  (Comment only)

Add a sample entry for a Sony 650 MB MOD.
1995-10-02 21:31:21 +00:00
Peter Wemm
4e3c5cb5f3 Update the /dev naming for the Specialix driver.. I've changed it to do
the same sort of thing as the Digiboard driver (ttyD*), as creating 96
/dev entries one by one was very painful.
1995-09-22 20:42:11 +00:00
Andreas Schulz
41a9a02d31 Add a description for the wcd* devices to the Disks section. 1995-09-16 23:15:01 +00:00
Jordan K. Hubbard
f8bf743c02 Add entries for Digiboard serial card and document Specialix driver
entries while I'm at it.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su> + mods by jkh
1995-09-03 20:40:16 +00:00
Joerg Wunsch
d96ce489cc Install the hooks for the Japanese `od' driver (aka. MOD).
Submitted by:	akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1995-08-19 15:50:56 +00:00
Jordan K. Hubbard
736267d692 Device entry for IDE CDROM driver.
Submitted by:	Serge Vakulenko <vak@cronyx.ru>
1995-08-18 11:29:05 +00:00
Peter Wemm
150e023bc9 Add simple hooks to create /dev entries for the Specialix driver
Reviewed by:
Submitted by:
Obtained from:
1995-08-13 22:05:51 +00:00
Jordan K. Hubbard
162efbb15c Add device support for the Matrox Meteor.
Submitted by:	james
1995-08-01 13:15:52 +00:00
Jordan K. Hubbard
55cc556c42 Fix the mknod for spigot. 1995-07-30 12:56:26 +00:00
Bruce Evans
d10b6048eb Remove /dev/ from socksys link again.
Move `Individual slices' case earlier so that it can be used to handle
sliced floppies.

Remove superfluous `chmod 600's.

Fix formatting of device list.

Don't group setting of umasks with setting of units.

Remove superfluous trailing semicolons.
1995-07-29 05:25:08 +00:00
Jordan K. Hubbard
b366737bf0 New sound device names.
Reviewed by:	hasty & lowe
Submitted by:	pst
1995-07-29 00:40:40 +00:00
Jordan K. Hubbard
7dc962a0af Part of Vincenzo Capuano's changes to xntpd to support the
Boeder DCF77 Receiver.
Submitted by:	Vincenzo Capuano <VCAPUANO@VMPROFS.ESOC.ESA.DE>
1995-07-21 13:02:13 +00:00
Rodney W. Grimes
264f3ec466 FreeBSD/386 -> FreeBSD/i386
Submitted by:	Thomas Graichen <graichen@sirius.physik.fu-berlin.de>
1995-07-17 20:07:47 +00:00
Rodney W. Grimes
694ae09c05 Reviewed by: sos
Submitted by:	bde

rc.i386 failed messily when I used a serial console.

Editors note:
Use file redirection so that all the kbdcontrol and vidcontrol
commands act upon /dev/ttyv0 instead of stdin.  Though this feature
is not documented it is the intended behavior of {vid,kbd}control
and shall be documented in the future as such.
1995-05-26 18:06:52 +00:00
Jordan K. Hubbard
2c3b28f96d Add tun0 to the all rule. 1995-05-18 10:51:03 +00:00
Rodney W. Grimes
f8a6f4a227 Remove all /dev/'s from device names, they should all be relative
to /dev.  Putting absolute paths in here breaks the make release
process, and screws up testing of this script in other directories.

Submitted by:	bde
1995-05-15 09:44:10 +00:00
Gary Palmer
64cecefe43 Clean up the matcd entry so it deletes the *matcdl* entries before trying
to create new ones.

Reviewed by:	davidg, rgrimes
1995-05-15 06:55:18 +00:00
Jordan K. Hubbard
7b094c1c1d The lites web page has moved.
Submitted by:	rich
1995-05-11 20:39:36 +00:00
Andrey A. Chernov
75343e2589 Change 'rc' entries from 'r' to 'm', conflict with ptys 1995-05-07 23:04:03 +00:00
Peter Dufault
99d181f7a9 Make scsi control devices such as "/dev/rsd0.ctl". 1995-05-03 18:15:35 +00:00
Peter Dufault
b53e9e2751 Use the correct offset for LabPC digital devices. 1995-05-01 14:34:45 +00:00
Jordan K. Hubbard
90e83ab7ee As a public service (and because I'd like to see more LITES people chose
FreeBSD), add mach-4 target to MAKEDEV; it creates various compatability
devices for Mach4.
Submitted by:	(Submitter name unknown) <root@ns2.redline.ru>
1995-04-30 07:56:45 +00:00
Bruce Evans
af5b6e3f9d Remove chmod of pcaudio* to 666. Not everyone should be allowed to
play the speaker and consume 10-100% of the available cycles.

Remove chmods of sound devices to 666.  Use chmod to give the same security
holes.
1995-04-28 07:53:43 +00:00
Bruce Evans
d45ae51059 Add cyclades serial devices cuac*, cuaic*, cualc*, ttyc*, ttyic* and ttylc*. 1995-04-28 07:39:21 +00:00
Peter Dufault
657e73c4f5 Add National Instruments "LabPC" driver 1995-04-28 00:51:40 +00:00
Bruce Evans
cd782e4154 Reviewed by: Gene Stark (starkhome!gene@sbstark.cs.sunysb.edu)
Change ownership of tw* from bin.bin to root.operator.  Hardware devices
shouldn't be accessible to bin.
1995-04-26 08:07:30 +00:00
Andrey A. Chernov
29ea28d79e Add 'rc' devices. 1995-04-23 12:02:21 +00:00
Rodney W. Grimes
51564ceea8 A better solution for the noisy ibcs2 startup, just echo a space and then
call ibcs2.
Submitted by:	jkh, slight modification by me.
1995-04-13 21:23:17 +00:00
Jordan K. Hubbard
d99fdc4f07 I missed some of Frank Durda's changes for MAKEDEV. Fixed.
Submitted by:	Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-04-13 00:51:55 +00:00
Rodney W. Grimes
40a36bc906 Add missing "echo '.'" to end of file so that the next file called
starts on a new line.
1995-04-10 01:39:13 +00:00
Rodney W. Grimes
1f55ebbcd9 This is a purely cosmetic clean up. Fix many cut and paste problems that
had turned tabs into spaces.
1995-04-09 09:54:51 +00:00
Jordan K. Hubbard
0039743841 Don't spit out a gratuitous ibcs2 startup message. 1995-04-06 02:38:37 +00:00
Andrey A. Chernov
d9e7919357 Set desired cursor type for syscons 1995-04-04 17:34:55 +00:00
Andrey A. Chernov
213abfcf47 Add missing ';' 1995-04-01 12:55:33 +00:00
Andrey A. Chernov
923782ecb6 Restore my function key configuration stuff which Rod promise to
restore but really didn't do it.
Restore message from old rc about configuring syscons whith
echo added before it to go to new line after "echo -n xtend" f.e.
and similar stuff.
1995-03-30 09:39:51 +00:00
Rodney W. Grimes
711aa1c272 This is the rc work as provided by pts, I will me makeing some additional
changes to it based upon other outstanding bug reports and commits made
after his work.

Comments:

(a) sysconfig is still used to do all configuration.  I was not going to
    change that out from under you.... a user never need edit netstart
    or rc* unless they're being very weird.

(b) rc.maint has been folded back into rc.  It is just unworkable as
    a separate chunk because of ordering bogosities

(c) netstart does what it says... it starts up enough of the network to
    get up,  it doesn't start every bloody daemon that might talk to a
    socket...  netstart ifconfig's the devices and sets up routing if
    configured to do so.

(d) nfs disks are mounted immediately after netstart completes

(e) syslog is started as early as possible (right after nfs) so that error
    messages can get logged to remote syslog servers properly

(f) named is started (there is an argument that says that named should be
    started before syslogd because if you are the dns server for your domain,
    you'd like named to resolve remote hosts in syslog.conf,  but this is
    a minority case and the trivial workarround is to put the syslog host
    in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog
    to catch named errors, which is a MUCH more important and likely occurance)

(g) NOW all of the rest of the network daemons such as the time stuff, RPC,
    NIS, NFS, Kerberos and inetd are started

(h) the rest of the generic stuff is done (cron/printer/sendmail)

(i) shared libraries are set

(j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2,
    xtend, and all of the syscons stuff
    (this is actually started as /etc/rc.`uname -m`

(k) the syscons stuff has gotten a serious cleaning to make it consistent
    with rc conventions

(l) rc.local has had the comments about syscons removed (they are not relevant
    to this file now) and the full name of the kernel has been restored to
    /etc/motd

Submitted by:	pts
1995-03-30 06:26:19 +00:00
Jordan K. Hubbard
99b1970f84 Fix apm and gsc rules to allow <blah>0' or just <blah>' to be shorthand.
[Actually, it's `<blah>*' but I'm not telling anyone]
1995-03-21 06:31:00 +00:00
Andrey A. Chernov
34ee6d3450 Make /dev/pss instead of /dev/sndproc (unused) 1995-03-13 00:10:40 +00:00
Bruce Evans
f2a5c98e24 Clean up white space. 1995-03-12 15:25:32 +00:00
Peter Dufault
a1b8d6bad1 Noticed by: Nate
Fixed the MAKEDEV pattern for SCSI processor type driver so it doesn't
screw up ptys.  Does anyone want to suggest a better name than "pt0" for
SCSI processor devices before 2.1?
1995-03-11 12:07:57 +00:00
Peter Dufault
8bcbc1f424 Add processor and worm drivers 1995-03-04 20:54:24 +00:00
Bruce Evans
f8360b9bf3 For sd, vn and wd:
Support sliced devices better.  E.g.:
`sh MAKEDEV sd0' creates [r]sd0 and [r]sd0s[1-4] as well as [r]sd0[a-h]
(the extra devices created by default won't hurt apart from wasting inodes).
`sh MAKEDEV sd0s1[a-h]' creates [r]sd0s1[a-h] (any partition creates all).
`sh MAKEDEV sd0s5' creates [r]sd0s5.

Support unit numbers 0-31 (was 0-6).

For wd:

Remove support for creating DOSpartitions wd*[i-m].  These will get removed
if you run MAKEDEV on `all' or on wd*.
1995-03-04 12:22:14 +00:00
Jordan K. Hubbard
6ccfe20ece Add Matsushita CDROM device entries.
Submitted by: Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:11:47 +00:00
Andrey A. Chernov
8a6fe12553 Cleanup device names, add more devices for Linux sounddriver 1995-02-27 18:54:27 +00:00
Joerg Wunsch
bcdd2389fe Allow tty0? to be an alias for tty? when creating the dev nodes.
People tend to be confused unnecessarily otherwise.
1995-02-24 19:26:59 +00:00
Jean-Marc Zucconi
bb12981561 Change permissions and ownership of joystick device files. 1995-02-22 23:52:58 +00:00
Bruce Evans
c69e71b3e9 Fix some bogus and missing chowns:
444 -> root.wheel
root -> root.wheel
uucp -> uucp.wheel (perhaps this should be .dialer, but .wheel is safer)
missing -> root.wheel

chown to root is usually bogus because mknod had to be run by root to
create the inode.  Setting the group explictly is currently necessary
because MAKEDEV does nothing to ensure that its working directory has
a suitable group.

Driver authors!  Please fix any bogons in MAKEDEV that involve your
drivers.  The sound devices are still world writable...
1995-02-17 12:32:34 +00:00
Bruce Evans
96658fee5a Adjust for rearranged slice numbers. Only create partitions on slice 0
for now (there are too many minors to create by default).  The special
sliced disk case ssd*|svn*|swd*) can almost replace the standard disk
case sd*|vn*|wd*) now (it just creates a few more devices), but there
will have to be special cases to allow creating slices 6-31 and partitions
on slices 2-31.

Fix bogus default cases.
1995-02-16 16:03:29 +00:00
Jordan K. Hubbard
19c84690f0 Add device entries for ISDN driver. 1995-02-14 23:48:05 +00:00
Ugen J.S. Antsilevich
187ec8f5ae Added /dev/snp? entry.. 1995-02-14 21:13:14 +00:00
Bruce Evans
0e229bc0a8 Add chowns for pty's, ttyv's and ttyd's. Correct the chown for lptctl's.
The group was wrong if MAKEDEV was run in a directory with group other
than wheel.  This may have messed up the group in recent SNAPs
(sysinstall/obj should have group bin).

Reset the umask to 77 after running MAKEDEV.local.  Some cases depend on
the 77 default.  MAKEDEV.local and all cases should probably set the
umask explictly and not depend on a default.  Most cases already set it.
1995-02-10 20:08:25 +00:00
Jordan K. Hubbard
a8716840ba Device entries for >32 PTYs.
Submitted by:	Heikki Suonsivu <hsu@cs.hut.fi>
1995-02-09 11:10:02 +00:00
Jordan K. Hubbard
89bcd2d778 Video Spigot entries.
Submitted by:	Jim Lowe <james@blatz.cs.uwm.edu>
1995-02-07 12:07:18 +00:00
Jordan K. Hubbard
770f05c102 Add tun to list of devices.
Submitted by:	mr
1995-02-01 23:15:11 +00:00
Jean-Marc Zucconi
61b1d15857 Add joystick 1995-01-25 21:21:28 +00:00
Jordan K. Hubbard
2f6df2645b Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s
driver for the Genius GS-4500 hand scanner.
Submitted by:	gusw@fub46.zedat.fu-berlin.de
1995-01-07 14:52:08 +00:00
Andreas Schulz
c8ac34903c Add entries for the sony and panasonic drives. The not SCSI and not EIDE
drives :-).
1994-12-25 15:08:29 +00:00
Bruce Evans
6216a129da Add support for sliced disk devices ssd*, svn*, swd*. The `s' at the start
of these names is so that they can be distinguished in MAKEDEV until the
non-sliced devices go away.
1994-12-16 15:59:44 +00:00
Andrey A. Chernov
1fc232a389 Fix wrong regexps 1994-12-08 00:44:55 +00:00
Andrey A. Chernov
634225d12e Fix wrong unit=expr for tty? cua? 1994-12-06 23:06:10 +00:00
Bruce Evans
8a1068b371 Name the serial ports tty* and cua* in comments. ttyd* and cuaa* don't
match all the port names.

Start using shell functions to avoid duplication.

Make tty* independent of cua*.  Restore support for old names (tty0 ==
ttyd0, cua0 = cuaa0...).

Restore making of lpt1 and lpt2 by default.

Keep umask 077 for making vty*.  World-ioctable vtys are huge security holes
because of bugs in syscons.

Make vga if a vty is made.  It may still be required for X.  It got nuked
with pc*.

Start using umask consistently to avoid using chmod.
1994-12-06 19:50:17 +00:00
Andrey A. Chernov
6a3a94427d Remove yet one pccons-related comment 1994-12-04 23:50:40 +00:00
Andrey A. Chernov
ab9ea4a725 New serial naming convention, remove tty0?, change cua0? --> cuaa?
Remove pccons stuff, we don't have it.
1994-12-04 23:48:38 +00:00
Poul-Henning Kamp
d71771e8e3 Added vn*, doing the same thing as sd* and wd*. (Disklabel support will
be added to the vn driver).
1994-12-04 20:15:15 +00:00
Jordan K. Hubbard
e28b57d51b Add back the Croynx stuff I nuked accidently. I'm not touching this
file anymore after this.  My link makes it too painful to make
interactive mods, and I don't have the CVS tree here so making changes
for "previous history" have to get done on freefall, with the corresponding
degree of pain.
1994-12-03 14:01:01 +00:00
Jordan K. Hubbard
46953c1291 Back out previous commit until we work this out. Sigh. 1994-12-03 04:46:09 +00:00
Garrett Wollman
ce257f0e68 Add cronyx driver entries. 1994-12-03 00:07:49 +00:00
Jordan K. Hubbard
4274bc80ca |From: Keith Walker <kew@timesink.spk.wa.us>
|Message-Id: <199412011713.JAA03374@timesink.spk.wa.us>
|To: jkh@whisker.hubbard.ie
|Subject: A little problem with MAKEDEV
|
|For a while now, MAKEDEV's been kinda neat: you create the cua* files,
|and it deletes the tty* files; you create the tty* files and it
|deletes the corresponding cua* files. K00l! :-)

[Ed Note - I think this behavior was wrong, and this fix better].
1994-12-02 16:08:53 +00:00
Andrey A. Chernov
0e60e64d95 Wrong raw device was created for cd/mcd: d instead of c 1994-11-12 15:48:54 +00:00
Poul-Henning Kamp
feba6ddfd8 /dev/apm should be /dev/apm0 1994-11-10 02:32:29 +00:00
Poul-Henning Kamp
3ac570fb2d The last committer didn't know that '*' doesn't start a comment in shell's ???? 1994-11-02 06:36:42 +00:00
Paul Traina
5ea2be93cd Add kernel hooks for /dev/vatio -- a minimalistic BSD audio driver emulator
created by Amancio Hasty (specificly, this, in conjunction with his sound
driver mods for dual-mode DMA will allow VAT compiled for BSD/386 1.1 to
run under FreeBSD 2.x.)
1994-11-01 01:47:22 +00:00
Poul-Henning Kamp
e68790c363 fixed a typing error. 1994-10-29 10:03:37 +00:00
Poul-Henning Kamp
85572e130f Make devices for sd2 and sd3 too. If we have them in Generic, we should
have the devices too.
1994-10-26 01:30:47 +00:00
Poul-Henning Kamp
a8a4ffd402 Various changes to the 1.1.5.1'sh install procedure. 1994-10-17 02:32:41 +00:00
Poul-Henning Kamp
3626ca509d Some changes to the old floppies to handle the new /etc/init's way of doing
things.
1994-10-16 20:38:27 +00:00
Poul-Henning Kamp
a5faf1be52 disklabel needs the "full-disk" partition 1994-10-15 07:56:02 +00:00
Søren Schmidt
a163498e32 Added socksys device (for iBCS2 emulation) 1994-10-13 20:10:14 +00:00
David Greenman
48a103c379 Added entry for apm device (needed for Advanced Power Management support). 1994-10-01 03:32:26 +00:00
Rodney W. Grimes
3c067b94d4 You must rm -f lkm before attempting to create it. 1994-09-30 07:33:42 +00:00
Garrett Wollman
98f78f2786 Make /dev/lkm as a part of std'. Delete references to ancient com' driver. 1994-09-23 19:17:27 +00:00
Rodney W. Grimes
b556ffbab0 1. Change all references for the kernel from /386bsd to /kernel.
2.  Make this say it is 2.0.0 (Development).

3.  Update the stty commands to say ^H for erase.

4.  Update the disklabel commands to use the new 4.4 syntax.
1994-09-15 04:46:16 +00:00
Poul-Henning Kamp
bee596e3db Added wd2 and wd3 to the standard set. They are in GENERICAH, they can
be installed on, so they should be in /dev as well.

Removed the smoking remains of dcf*. I didn't realize that it had made it
into MAKEDEV.  Gone from cdevsw long time ago, gone from /dev now.
1994-09-07 21:35:52 +00:00
Geoff Rehmet
12365022c0 Make it possible to run lptcontrol on a printer port which does not
actually have a printer connected or online:
- MAKEDEV:		remove all signs of lpa
			add lpctl? devices (minor # = unit + 128)
- usr.sbin/Makefile	add lptcontrol
- sys/i386/isa/lpt.c	implement the LP_BYPASS flag: when a unit is
			opened with this flag set, the printer is
			not primed, and no check is made to see that
			the printer is online.  This can only be used
			to pass ioctls.  (giving us /dev/lpctl?)
- lptcontrol.c		use /dev/lpctl? (LP_BYPASS)
			-f flag removed, -u flag added
- lptcontrol.8		document changes in lptcontrol
			rewrite using mandoc macros
Submitted by:	Geoff.
1994-09-03 22:47:08 +00:00
Jordan K. Hubbard
c7d2a2ef65 Put some of Rod's ugly hacks back - a couple of them prevent Yet Another Reboot
after bin/des distribution is extracted, so I figure it's worth it.
1994-06-29 20:29:12 +00:00
Rodney W. Grimes
57922c2a6c $rotdelay is now initialized to "-d 0 -n 1" and no longer changed based
upon disk type.  In far more cases than not this is the optimal setting
for any disk drive made after 1990.

This now means all installs will have the disks newfs'ed with either:
newfs -b 8192 -f 1024 -d 0 -n 1
or
newfs -n 4096 -f 512 -d 0 -n 1
depending on what the user chooses for the blocking factor.
1994-06-29 06:46:02 +00:00
Jordan K. Hubbard
81510658b4 Clean up the installation docs a bit (geeze Loise were they EVER out of
date!!) and rename them to something more eye-catching so people will read them
again (considering the previous state of affairs, I'm actually rather glad they didn't!).
1994-06-28 09:01:55 +00:00
Jordan K. Hubbard
4f351f3ff4 Add --unlink flag to all tar commands, but each for different reasons.
1. Add to secr and bindists to possibly save the occasional fool who
   doesn't RTFM and uses the wrong command to extract this (or even someone
   who's legitimately using this to extract on top of a bindist somewhere
   *else*).

2. Do the right thing with any symlinks in the src tree.  Right now, we're
   free of the buggers, but just in case.
1994-06-28 07:28:28 +00:00
Jordan K. Hubbard
c95719bae6 Remove Rod's hacks - they're no longer necessary with static tar/gzip and
tar --unlink.
1994-06-28 07:20:30 +00:00
Jordan K. Hubbard
4d7351f7d4 Commit Scott's changes to the bad144 stuff - bad144 takes a list of bad
blocks as *multiple* arguments, not one argument (as was incorrectly being
passed).
1994-06-28 05:56:13 +00:00
Jordan K. Hubbard
f150b420d2 Commit a small change to allow FreeBSD to install on a different drive.
The kernel configs already support this, so with a boot floppy or a utility
like booteasy, the user should be able to install and boot off the second drive.
Hurrah.
1994-06-20 06:05:16 +00:00
Jordan K. Hubbard
36dc2b3fd6 Fixes from Bruce Evans:
o insecure and inconsistent permissions for tape devices.
	o didn't make the DOSpartition wd devices.
1994-06-17 21:50:07 +00:00
Jordan K. Hubbard
b4c84151ac Add a beep to the load_fd stuff for each floppy insert request so
that you can read a book and load the floppy distribution at the same
time.. :-)
1994-06-15 21:04:04 +00:00
Jordan K. Hubbard
d5500fb5b4 Remove the --exclude libc.so.1.1 line; with a static gzip and tar we
no longer need it, and it's just one more thing we would have to remember
to change with every shared lib version bump.
1994-06-15 21:02:36 +00:00
Jordan K. Hubbard
b83e1e51be Commit Rod's magic EXTRACT scripts to the tree so that we can work on
them.  These were al hand-copied over before.
1994-06-15 20:15:12 +00:00
Jordan K. Hubbard
abe5ea49b0 1. Bump minimum root size to 8MB (we need that much now).
2. Bump version number to 1.1.5 for impending release.
1994-06-15 19:23:33 +00:00
Geoff Rehmet
bccbb20f01 Modify messages about the resolver manual page as per Rod's suggestions.
The configure function now tells the user to type "man 5 resolver"
for more info on resolv.conf, but mentions that the bindist must
be fully installed before this can be done (actually a user won't
have reached this stage if he doesn't have an installed bindist ;-)
1994-06-12 11:05:04 +00:00
Geoff Rehmet
3b7e1fa300 Allow configuration of resolv.conf though "configure". The
configuration which is done is minimal, and the script refers the user
to the resolver(5) manual page for information on fine-tuning name
resolution.
1994-06-11 12:42:35 +00:00
Geoff Rehmet
80dde3cb2b Change reference to libc.so.1.0 to libc.so.1.1.
(Pointed out by Volker Paepcke)
1994-06-08 10:52:10 +00:00
Jordan K. Hubbard
0b1915b6d4 I just realized that the vtty's won't kick in until the user loads the bindist
and reboots multiuser.  Ammend the text slightly to avoid confusion.
1994-06-04 12:00:51 +00:00
Jordan K. Hubbard
ed7be55bbd 1. Bumped version number to 1.1.5 in preparation for impending release.
2. Added notes that tell the user a little bit about how to use syscons
   since they'll be running it from the outset now and would probably like
   to know how to switch terminals.
1994-06-04 11:55:56 +00:00
Andrey A. Chernov
f21bfa8ee5 From Ache:
Add proper devices for new sio initial/locking mechanism
1994-05-30 03:53:01 +00:00
Rodney W. Grimes
26ceed66d4 Fix all the sound devices to NOT have the absolute path /dev, the makes for
missing device files in releases!!
1994-05-21 08:55:52 +00:00
Jordan K. Hubbard
d4d8a38f6f Add 4 VTY's back to the list of things to create by default (the codrv
comments were obsolete), also create a PS/2 mouse entry.
1994-05-19 11:05:09 +00:00
Rodney W. Grimes
862d153aaa Fisx spelling error from John Lind 1994-05-15 01:10:17 +00:00
Rodney W. Grimes
12d6354a35 >From 1.1 branhc:
----------------------------
revision 1.13.2.1
date: 1994/05/05 03:58:27;  author: rgrimes;  state: Exp;  lines: +15 -25
Upgrade some things that are now different in 1.1.
----------------------------
1994-05-15 01:09:23 +00:00
Andrey A. Chernov
3c7d122598 Make dialout devices owned by uucp.dialer with 660 mode 1994-05-10 09:18:11 +00:00
Rodney W. Grimes
bacf044f40 Use the hostname.interface file just like the 3 floppy install. 1994-05-03 10:11:47 +00:00
Jordan K. Hubbard
eeee6ddd2b Configure: If netmask wasn't entered at all, it caused the ifconfig line to
have a bogus trailing `netmask' with no argument.  Fixed.

Rod:  Please take this into 1.1 Release.
1994-04-26 23:26:18 +00:00
Søren Schmidt
75a489c919 device support for pcaudio added 1994-04-21 14:08:27 +00:00
Rodney W. Grimes
641ecfdd1d >From BETA_1_1 branch:
----------------------------
revision 1.1.2.1
date: 1994/04/10 20:20:26;  author: rgrimes;  state: Exp;  lines: +11 -5
Use /dev/fd0 instead of /dev/fd0a.  Add mounting of mcd1 if mcd0
fails when searching for a cdrom drive.
1994-04-18 04:26:25 +00:00
Rodney W. Grimes
f010fbc6da >From BETA_1_1 branch
----------------------------
revision 1.1.2.1
date: 1994/04/10 20:20:25;  author: rgrimes;  state: Exp;  lines: +3 -3
Use /dev/fd0 instead of /dev/fd0a.  Add mounting of mcd1 if mcd0
fails when searching for a cdrom drive.
1994-04-18 04:25:21 +00:00
Rodney W. Grimes
863c4478c0 >From BETA_1_1 branch:
----------------------------
revision 1.2.2.3
date: 1994/04/17 19:45:24;  author: rgrimes;  state: Exp;  lines: +13 -2
Eliminate warning messages about /sbin/sh /sbin/init and /etc/termcap
when extracting the bin or des archives.  Note this is also the
place I fixed the libc.so.1.0 problem a long time ago by adding
a --exclude libc.so.1.0 to the tar command.
1994-04-17 19:57:35 +00:00
Andrey A. Chernov
6d518cf807 Fix tty? entry in the same way like cua entry
Add error diagnotic about unknown device name
1994-04-03 14:24:52 +00:00
Andrey A. Chernov
207a3900f0 Fix error in making cua entries for two multiports
(> 10 devices)
1994-04-03 04:39:54 +00:00
Rodney W. Grimes
4e208024d0 These are the installation and profile files from the 1.0 cdins*.flp
floppy images.  Put in as they were in 1.0, about to change them to
work with 1.1.
1994-03-20 00:12:38 +00:00
Rodney W. Grimes
1a231d77d2 >From Chris Christoph P. U. Kukulies kuku@acds.physik.rwth-aachen.de
Change references to we0 to be ed0 since the we driver is long gone.
1994-03-18 03:09:51 +00:00
Rodney W. Grimes
01bfdff2c1 Add mitsumi cdrom /dev entries. 1994-03-07 00:57:38 +00:00
Rodney W. Grimes
edb52a9f6d >From BETA_1_1 branch
Add missing ${cpioverbose} option.
1994-03-07 00:43:11 +00:00
Andrew Moore
27dd9a00a3 Don't sync a ro-mounted fs. 1994-03-02 00:03:41 +00:00
Andrew Moore
9bf051a923 Don't offer to mount a to-be-overwritten DOS partition. 1994-03-01 23:51:48 +00:00
Andrew Moore
2b4ff1d41e extract() is more friendly
added load_dos (just calls load_fd)
1994-02-25 23:34:14 +00:00
Rodney W. Grimes
de5faa7720 It is not nice to extract libc.so.1.0 using tar when tar is using it!!
UGLY HACK TO GET 1.1 BETA OUT :-(
1994-02-23 16:47:04 +00:00
Rodney W. Grimes
df6193abae Make it say Preparing for dos fs instead of Initializing.. the later sounds
scary to some people!
1994-02-23 15:43:20 +00:00
Rodney W. Grimes
c5d47aacfd Add NE2100 Per Paul Richards, and whoopsss.... I did this in /usr/src
on the WRONG system (actually, just the wrong window :-)).
1994-02-22 17:11:27 +00:00
Rodney W. Grimes
64eb68b1e5 Major hackery to get the 1.1 Beta floppies building. Have a special
pair of crunched binaries that are not built by this, but other than
that it is back to an automated procedure.  So many changes it is
hard to describe.
1994-02-21 21:52:00 +00:00
Rodney W. Grimes
b5845fe05d Correction so old alias floppy and floppy5 work. 1994-02-20 10:43:02 +00:00
Andrey A. Chernov
7fe4cce0d8 Remove sio entries per Rod suggestion 1994-02-19 15:45:13 +00:00
Andrey A. Chernov
f5531fa6c6 Sorry, expr error in last commit. 1994-02-19 14:32:56 +00:00
Andrey A. Chernov
2a369b20d2 We lost ttyd for dialin lines, now restore it 1994-02-19 13:17:03 +00:00
Andrey A. Chernov
546b9776b0 rm# for 5.25 driver changed per Bruce suggestion 1994-02-11 11:00:13 +00:00
Andrey A. Chernov
81a8e8fa0e Add floppy entries for new fd driver
(from Poul-Henning Kamp) slightly fixed
1994-02-10 10:44:08 +00:00
Rodney W. Grimes
90ce3e3585 Upgrade to 1.1 release level, add procfs entry on fstab creation. 1994-02-09 05:26:16 +00:00
Rodney W. Grimes
c6d9092e16 One more reference to fdXa removed.
Run fdisk -u after disklabel just incase we wrote block 0, this should fix
the bogus partition table when the install is to the whole disk.
1994-02-08 09:37:28 +00:00
Rodney W. Grimes
8c18e419c6 Update to use /dev/fd0 instead of /dev/fd0a. 1994-02-08 08:45:10 +00:00
Andrew Moore
a38943d9a0 Add devices for QIC 40/80 support 1994-02-07 04:25:07 +00:00
David Greenman
707a0e9f5c Added creation of a symlink for ttyv0->vga when making the 'pc0' target. 1994-01-26 23:45:34 +00:00
David Greenman
205c41b457 Deprecate "/dev/vga". Use /dev/ttyv0 always. Note that the terminal type
is still 'pc3' in /etc/ttys, and should be changed if we decide to default
to syscons.
1994-01-24 20:57:16 +00:00
Andrey A. Chernov
946b113fcf Add callout device for bidirectional port 1994-01-10 18:11:30 +00:00
Rodney W. Grimes
4348705c2b Insert tab before comment so brain dead shell does not screw up
the arguments to mknod.
1993-12-24 11:36:28 +00:00
Andrey A. Chernov
8d572de0b8 Comment out porogrammer-readable fd name set,
not needed in standard version, only for XENIX lovers.
1993-12-21 05:49:28 +00:00
Andrey A. Chernov
aa5cc1650c User-readable fd name set added:
[r]fd[n].{360,720,800,820,1200,1440,1480,1720}
Programmer-readable fd name set added in XENIX style.
1993-12-18 01:19:02 +00:00
Andrey A. Chernov
35178aadcd No more partition bits in floppy minor.
Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density.
If density == 0, CMOS-detect format assumed.
For old users/pgms use fake partitions now, i.e.
	ln fd0 fd0[a-h]
No new floppy names added (expect fd? and rfd?),
because don't have agreement yet, so make devices
only for CMOS-detected formats.
1993-12-16 04:34:11 +00:00
Andrew Moore
d79c566f9d From: Sergey Ryzhkov, Serge Vakulenko
E-mail: <sir@kiae.su>, <vak@zebub.msk.su>
added new /dev/wt entries for wt.c version 1.3

8) Some controllers support only 1024 block length.
   Setting WT_BSIZE bit in device minor number turns on this mode.

Minor number structure:
	0bfffuuu
Fields:
	uuu   - Unit number. It's possible to install
		up to three tape controllers on the same machine,
		using DRQs 1..3.  Hence, unit number can lie
		in range 0..2.
	fff   - Tape format number:
		0 - /dev/rwt0  - default density (auto select)
		1 - /dev/rwt0a - QIC 11 (obsolete)
		2 - /dev/rwt0b - QIC 24 (60 megabytes)
		3 - /dev/rwt0c - QIC 120 (120 megabytes)
		4 - /dev/rwt0d - QIC 150 (150 megabytes)
		5 - /dev/rwt0e - QIC 300 (300 megabytes?)
		6 - /dev/rwt0f - QIC 600 (600 megabytes?)
	b     - Long block size flag.  With this bit set,
		the driver will perform all i/o operations
		with the controller using 1024-byte
		blocks, instead of 512 ones.
		Some controllers need it (CMS for example).
		If you Wangtek controller does not stream well,
		you can try to use /dev/rWt0 device instead
		of /dev/rwt0 (uncomment needed lines in /dev/MAKEDEV
		to create it).

Block interface (writing blocks less than 2048 bytes) is not functioning
pwoperly.  Use raw interface instead.

Thanks to all who helped to test it on the following hardware:

Controller           Drive            Volume    Interface     Thanks to
---------------------------------------------------------------------------
Archive SC-499       Archive 2150L    150 Meg   QIC-02        KIAE
CMS?                 ?                150 Meg   QIC-02        KIAE
Everex EV 831/833    ?                ?         QIC-36        Joergen Haegg
Wangtek ASSY         Wangtek          60 Meg    QIC-02        Ken Whedbee
Tecmar QT150i?       Wangtek 5150EQ   ?         QIC-02?       Marko Teiste
?                    Wangtek 5099EK   60 Meg    QIC-36        Robert Shien
Archive SC400S       ?                60 Meg    ?             Warren Toomey
1993-12-14 11:11:37 +00:00
Rodney W. Grimes
9d08e5f2ce Missing part of Julians new scsi code, add new driver uk and revise the
entries for st.
1993-11-22 05:40:49 +00:00
Andrew Moore
32c96f840b Removed option to install FreeBSD alongside an existing *BSD
paritition, since disklabel cannot deal with this...
1993-11-12 04:58:31 +00:00
Andrew Moore
a59a0c2552 fixed conditional that caused install to see a DOS partition when none exists. 1993-11-08 03:58:31 +00:00
Garrett Wollman
b704abb773 Added comment in the description of `com' devices that they are usually
not what users want unless they have re-configured their kernels.  Hopefully
some people will actually read this.
1993-11-06 23:22:23 +00:00
Rodney W. Grimes
343b7b7dd1 Add zero and io to the rm -f line for std devices so they get removed before
an attempt is made to mknod them.
1993-10-28 09:59:27 +00:00
Jordan K. Hubbard
fd511bfb54 Moved sound drivers from major 21 to major 30. 1993-10-23 22:24:35 +00:00
Jordan K. Hubbard
ac6442dd5f New snd*) target for making driver entries for new sound driver. 1993-10-23 10:58:51 +00:00
Nate Williams
9a62714e66 Fixe a spelling error and added both the mse (logitech and ATI inport) and
the psm (PS/2 bus) mouse support

(The psm driver will have to come later)
1993-10-19 20:00:35 +00:00
Rodney W. Grimes
79334ce243 Make darn sure that fsck does not try to fsck dos file systems by setting
the fsck pass to 0, same thing for dump field, in the fstab that is
created by this script.
1993-10-19 19:58:55 +00:00
Rodney W. Grimes
7d5c294ad4 Remove reference to EPSILON release. 1993-10-19 17:33:38 +00:00
Jordan K. Hubbard
b58f2b4a22 Checked and corrected various bits of grammar, as requested. 1993-10-16 12:41:36 +00:00
Rodney W. Grimes
53d94479dd Fix the document title to match the format of our other docs.
Clean up some stuff so that it reads a little better (some one please
review this for me!)

Adaptec controllers are 154x and 174x series.  Add Buslogic 545S.
1993-10-16 12:22:45 +00:00
Rodney W. Grimes
c4182bc6ea Remove the EPSILON from the release level 1993-10-16 12:06:30 +00:00
Rodney W. Grimes
e16c80bb9e Fix the title up on this, removed the date and format it to match
the RELEASE NOTES.

Adaptec controllers are now 154x and 174x series, no more reference
to specific models.  Revamp the CSI hard disk controller section in
general to be more user readable.

Add the fact that the Mitsumi CDROM controller and drive are now
supported.

Add a note that the Intel 82501 serial chip is NOT supported.

Floppy controller is fd0, not fdc0, same for wd disk controller.
1993-10-16 12:05:51 +00:00
Christoph Robitschko
5e53051768 Allow install floppy to be placed in the B: drive. 1993-10-16 09:12:08 +00:00
Rodney W. Grimes
09787fbaca Added /dev/zero and /dev/io, they have been around for a while, time to
have some /dev entries.
1993-10-06 03:35:03 +00:00
Rodney W. Grimes
017d59f23a Release level changed from GAMMA to EPSILON 1993-10-01 19:22:43 +00:00
Rodney W. Grimes
40762343f9 Updated to reflect the fact the there is no longer an ne driver, told to
use ed0 as the replacement, noted new addresses
1993-10-01 04:43:56 +00:00
Rodney W. Grimes
edc274e629 Changed address freebsd-comments to freebsd-questions 1993-10-01 04:40:57 +00:00
Rodney W. Grimes
73baabee9a Support for new wt driver. Removed old references to as* disk types since
they are long gone.
1993-09-30 20:18:59 +00:00
Andrew Moore
3e79ffa604 added to install_notes instructions for loading distribtuion
files from a MS-DOS partition.
Minor cleanup:
fixed spelling error in inst1.install
capitalized sentences in kc.profile
reworded initial load_fd options
1993-09-22 07:38:18 +00:00
Andrew Moore
2712db44d1 Extended load_fd() to support reading from the first Primary DOS
partition of the boot disk.  So we have yet another medium via
which to load the FreeBSD distribution files.  load_fd() has
options for listing and (if reading from the C:  drive) changing
directories.

load_fd's notation assumes that the first Primary partition on
disk is the DOS drive C: (since this and only this one is mounted
by install).  Otherwise, the notation may be a bit confusing.
We'll know the assumption is bad if people complain about
not finding files on their "C:" drive...

Added a device file existence check to kc.profile.
1993-09-21 10:24:42 +00:00
Andrew Moore
3bef766f61 1) Install now creates a DOS partition for the first (and only the
first) Primary (un-Extended) DOS partition, providing /dev/xx0h
is available.  It is mounted on /dos by default.  The /etc/fstab
entry omits the dump and fsck fields, i.e.:
/dev/xx0h	/dos	pcfs rw

The Secondary DOS partition is not used (System ID 0xF2), because I don't
know what that is.

2) Fixed default sizes so that if someone attempts to install BSD on a 24 Mb
partition by accepting defaults, they don't end up with a 1 Mb /usr
partition (up to USRMIN Mb's).  In this case, all space is split between
swap and root.

TODO:
1) Extend load_fd() to support loading distribution files directly from
the DOS partition of the hard disk.

2) Provide translated parameters to the install program (maybe
add an option to fdisk).  Currently, the true geometry is used as
default, which is inappropriate for coexistence with DOS.

3) Support installing on multiple or secondary disks.
1993-09-19 20:45:10 +00:00
Andrew Moore
a1ab210660 Added /usr/distbin to PATH 1993-09-18 08:20:32 +00:00
Rodney W. Grimes
bdf1099dbb >From: Drew Hess <dhess@CS.Stanford.EDU>
>Date: Thu, 16 Sep 1993 23:35:48 -0700 (PDT)
There is a typo in disktab in the NetBSD-0.9 distribution.  This may be
already fixed in NetBSD-current, but it's not in any of the source that I've
sup'ed.
line 9 reads:
#       sc      #sectors/cylinder, nc*nt default
should read:
#       sc      #sectors/cylinder, ns*nt default
1993-09-18 00:00:16 +00:00
Andrew Moore
9483b7bb0e Added the following to the opening statement of install:
Before starting, it is important to know your hard disk's geometry
(i.e., number of cylinders, heads and sectors/track).  If installing
FreeBSD on the same disk as another operating system, then the
two systems should use the same geometry.  In particular, FreeBSD's
default geometry is inappropriate for MS-DOS.  So in this case, the
DOS geometry should be used instead.

[This seems to be true for SCSI disks.   What about IDE?  With the new
boot blocks, can we ignore the disks true geometry??]
1993-09-17 09:05:52 +00:00
Andrew Moore
e1001e11da The load_fd() now initializes the `interactive' variable to -i instead
of -v (my fault).
The extract() command now rm's /tmp/cat, not /bin/cat (my fault).
1993-09-16 00:45:34 +00:00
Rodney W. Grimes
7de54fdffe >From: kuku@acds.physik.rwth-aachen.de (Christoph Kukulies)
Comment was wrong about what entries get made for vtyNN, it
is 0-b, not 00-12.
1993-09-14 21:42:14 +00:00