Commit Graph

218 Commits

Author SHA1 Message Date
Navdeep Parhar
861e42b209 cxgbe(4): Properly account for the freelist buffers used when returning
early from service_iq due to a budget restriction.  This fixes a potential
rx hang when using INTx.

MFC after:	3 days
2014-06-05 00:38:32 +00:00
Navdeep Parhar
368541ba1e cxgbe(4): Fix a NULL dereference when the very first call to
get_scatter_segment() in get_fl_payload() fails.  While here,
fix the code to adjust fl_bufs_used when a failure occurs for
any other scatter segment.

MFC after:	3 days
2014-05-30 22:59:45 +00:00
Navdeep Parhar
298d969c53 cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards.
Netmap gets its own hardware-assisted virtual interface and won't take
over or disrupt the "normal" interface in any way.  You can use both
simultaneously.

For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface
(note the 'n' prefix) in the hardware to accompany each cxl<N>
interface.  These two ifnet's per port share the same wire but really
are separate interfaces in the hardware and software.  Each gets its own
L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc.  You
should run netmap on the 'n' interfaces only, that's what they are for.

With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port
of a T580 card.  2 port tx is at ~56Mpps total (28M + 28M) as of now.
Single port receive is at 33Mpps but this is very much a work in
progress.  I expect it to be closer to 40Mpps once done.  In any case
the current effort can already saturate multiple 10G ports of a T5 card
at the smallest legal packet size.  T4 gear is totally untested.

trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43🆎cd:ef
881.952141 main [1621] interface is ncxl0
881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0
881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0
881.962540 main [1804] mapped 334980KB at 0x801dff000
Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus.
10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43🆎cd:ef)
881.962562 main [1882] Sending 512 packets every  0.000000000 s
881.962563 main [1884] Wait 2 secs for phy reset
884.088516 main [1886] Ready...
884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1
884.088607 sender_body [996] start
884.093246 sender_body [1064] drop copy
885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec)
886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec)
887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec)
888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec)
889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec)
890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec)
891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec)
892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec)
893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec)
894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec)
895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec)
896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec)
...

Relnotes:	Yes
Sponsored by:	Chelsio Communications.
2014-05-27 18:18:41 +00:00
Bjoern A. Zeeb
255cd9fd58 Move the tcp_fields_to_host() and tcp_fields_to_net() (inline)
functions to the tcp_var.h header file in order to avoid further
duplication with upcoming commits.

Reviewed by:	np
MFC after:	2 weeks
2014-05-23 20:15:01 +00:00
Navdeep Parhar
7a5b897dfe cxgbe(4): Remove stray if_up from the code that creates the tracing ifnet. 2014-05-23 01:45:44 +00:00
Maksim Yevmenkin
080a4b9b1c use correct (integer) type for the temperature sysctl
Reviewed by:	np, scottl
Obtained from:	Netflix
MFC after:	3 days
2014-04-17 19:29:15 +00:00
Navdeep Parhar
8b3f42d52d cxgbe(4): Recognize the "spider" configuration where a T5 card's 40G
QSFP port is presented as 4 distinct 10G SFP+ ports to the driver.

MFC after:	2 weeks
2014-03-21 00:56:56 +00:00
Navdeep Parhar
65bd4d1cb4 cxgbe(4): Use ifi_oqdrops in if_data to count drops in the tx path. 2014-03-20 02:28:05 +00:00
Navdeep Parhar
475992bdfb cxgbe(4): if_iqdrops statistic should include tunnel congestion drops.
MFC after:	1 week
2014-03-20 01:58:04 +00:00
Navdeep Parhar
38035ed6dc cxgbe(4): significant rx rework.
- More flexible cluster size selection, including the ability to fall
  back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in
  case an allocation of a larger size fails.
- A single get_fl_payload() function that assembles the payload into an
  mbuf chain for any kind of freelist.  This replaces two variants: one
  for freelists with buffer packing enabled and another for those without.
- Buffer packing with any sized cluster.  It was limited to 4K clusters
  only before this change.
- Enable buffer packing for TOE rx queues as well.
- Statistics and tunables to go with all these changes.  The driver's
  man page will be updated separately.

MFC after:	5 weeks
2014-03-18 20:14:13 +00:00
Dimitry Andric
e9e21b6e41 In cxgbe, conditionalize the t4_pgprot_wc() function, since it is only
used when DOT5 is defined.

Reviewed by:	np
MFC after:	3 days
2014-02-14 23:38:42 +00:00
Scott Long
f7a74e061b Add a new sysctl, dev.cxgbe.N.rsrv_noflow, and a companion tunable,
hw.cxgbe.rsrv_noflow.  When set, queue 0 of the port is reserved for
TX packets without a flowid.  The hash value of packets with a flowid
is bumped up by 1.  The intent is to provide a private queue for
link-level packets like LACP that is unlikely to overflow or suffer
deep queue latency.

Reviewed by:	np
Obtained from:	Netflix
MFC after:	3 days
2014-02-06 18:40:38 +00:00
Navdeep Parhar
e46dcc5670 cxgbe(4): Use the rx channel map (instead of the tx channel map) as the
congestion channel map.

MFC after:	1 week
2014-02-06 03:30:12 +00:00
Navdeep Parhar
7293a15f54 cxgbe(4): The T5 allows for a different freelist starvation threshold
for queues with buffer packing.  Use the correct value to calculate a
freelist's low water mark.

MFC after:	1 week
2014-02-06 03:21:43 +00:00
Navdeep Parhar
454813ff9c cxgbe(4): Use the port's tx channel to identify it to t4_clr_port_stats.
MFC after:	3 days
2014-02-06 02:34:29 +00:00
Adrian Chadd
3af0f449ae Add an option to enable or disable the small RX packet copying that
is done to improve performance of small frames.

When doing RX packing, the RX copying isn't necessarily required.

Reviewed by:	np
2014-01-02 23:23:33 +00:00
Navdeep Parhar
88bb82e511 Do not create a hardware IPv6 server if the listen address is not
in6addr_any and is not in the CLIP table either.  This fixes a reported
TOE+IPv6 NULL-dereference panic in do_pass_open_rpl().

While here, stop creating hardware servers for any loopback address.
It's just a waste of server tids.

MFC after:	1 week
2013-12-17 21:41:23 +00:00
Navdeep Parhar
93e9cae3fa Read card capabilities after firmware initialization, instead of setting
them up as part of firmware initialization (which the driver gets to do
only if it's the master driver).

Read the range of tids available for the ETHOFLD functionality if it's
enabled.

New is_ftid() and is_etid() functions to test whether a tid falls within
the range of filter tids or ETHOFLD tids respectively.

MFC after:	2 weeks
2013-12-14 03:08:03 +00:00
Adrian Chadd
ac68deae6d Print out the full PCIe link negotiation during dmesg.
I found this useful when checking whether a NIC is in a PCIE 3.0 8x slot
or not.

Reviewed by:	np
Sponsored by:	Netflix, inc.
2013-12-10 00:07:04 +00:00
Navdeep Parhar
d419aaa126 Unstaticize t4_list and t4_uld_list. This works around a clang
annoyance[1] and allows kgdb to find these symbols.

[1] http://lists.freebsd.org/pipermail/freebsd-hackers/2012-November/041166.html

MFC after:	3 days
2013-12-09 23:33:57 +00:00
Navdeep Parhar
273ef9912d cxgbe(4): save a copy of the RSS map for each port for the driver's use. 2013-12-08 17:47:37 +00:00
Navdeep Parhar
05337b80ee cxgbe(4): T4_SET_SCHED_CLASS and T4_SET_SCHED_QUEUE ioctls to program
scheduling classes in the chip and to bind tx queue(s) to a scheduling
class respectively.  These can be used for various kinds of tx traffic
throttling (to force selected tx queues to drain at a fixed Kbps rate,
or a % of the port's total bandwidth, or at a fixed pps rate, etc.).

Obtained from:	Chelsio
2013-12-03 18:34:52 +00:00
Navdeep Parhar
2471928bf8 Disable an assertion that relies on some code[1] that isn't in HEAD yet.
[1] http://lists.freebsd.org/pipermail/freebsd-net/2013-August/036573.html
2013-11-27 19:54:19 +00:00
Navdeep Parhar
245a0bd40a cxgbe(4): update the internal list of device features.
MFC after:	3 days
2013-11-21 20:07:58 +00:00
Navdeep Parhar
1192eeb8a3 cxgbe(4): Tidy up the display for payload memory statistics (pm_stats).
# sysctl -n dev.t4nex.0.misc.pm_stats
# sysctl -n dev.t5nex.0.misc.pm_stats

MFC after:	1 week
2013-11-07 00:25:49 +00:00
Navdeep Parhar
be2c01211c cxgbe(4): Exclude MPS_RPLC_MAP_CTL (0x11114) from the register dump. Turns
out it's a write-only register with strange side effects on read.

Submitted by:	gnn
MFC after:	3 days
2013-11-04 21:06:21 +00:00
Gleb Smirnoff
66e01d73cd - Provide necessary includes.
- Remove unnecessary includes.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-29 11:17:49 +00:00
Gleb Smirnoff
c3322cb91c Include necessary headers that now are available due to pollution
via if_var.h.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-28 07:29:16 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Navdeep Parhar
87f804e879 Fix typo in previous commit. 2013-10-18 00:00:08 +00:00
Navdeep Parhar
02318fcf86 iw_cxgbe should have a dependency on t4nex.
Reported by:	trasz@
2013-10-17 23:57:17 +00:00
Navdeep Parhar
fb93f5c47f iw_cxgbe: iWARP driver for Chelsio T4/T5 chips. This is a straight port
of the iw_cxgb4 found in OFED distributions.

Obtained from:	Chelsio
2013-10-17 18:37:25 +00:00
Navdeep Parhar
b3eda7872d cxgbe(4): Store the log2 of the # of doorbells per BAR2 page for both
ingress and egress queues, and for both T4 and T5.  These values are
used by the T4/T5 iWARP driver.
2013-10-14 23:32:56 +00:00
Navdeep Parhar
48d05478bf cxgbe(4): Update T4 and T5 firmwares to 1.9.12.0 2013-10-14 21:25:07 +00:00
Gleb Smirnoff
4cdc1f5421 There are some high performance NICs that count statistics in hardware,
and there are ifnets, that do that via counter(9). Provide a flag that
would skip cache line trashing '+=' operation in ether_input().

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
Reviewed by:	melifaro, adrian
Approved by:	re (marius)
2013-10-09 19:04:40 +00:00
Dimitry Andric
64db896617 Fix kernel build on amd64 after r256118, since the machine/md_var.h
header is not implicitly included there.  So include it explicitly.

Approved by:	re (delphij)
Pointy hat to:	dim
MFC after:	3 days
X-MFC-With:	r256118
2013-10-07 22:30:03 +00:00
Dimitry Andric
42355a4ff6 Remove redundant declaration of cpu_clflush_line_size in
sys/dev/cxgbe/t4_sge.c, to silence a gcc warning.

Approved by:	re (gjb)
MFC after:	3 days
2013-10-07 16:56:56 +00:00
Navdeep Parhar
eb22728291 Rework the tx credit mechanism between the cxgbe/tom driver
and the card.  This helps smooth out some burstiness in the
exchange.

Approved by:	re (glebius)
2013-09-09 04:38:57 +00:00
Navdeep Parhar
c81d56a0aa Fix a miscalculation that caused cxgbe/tom to auto-increment
a TOE socket's tx buffer size too aggressively.

Approved by:	re (delphij)
2013-09-09 00:16:59 +00:00
Navdeep Parhar
4f641559c7 For TOE connections, the window scale factor in CPL_PASS_ACCEPT_REQ is
set to 15 to indicate that the peer did not send a window scale option
with its SYN.  Do not send a window scale option in the SYN|ACK reply
in that case.
2013-09-03 23:34:04 +00:00
Navdeep Parhar
32e9219012 Fix the sysctl that displays whether buffer packing is enabled
or not.
2013-08-30 02:13:36 +00:00
Navdeep Parhar
1458bff9a4 Implement support for rx buffer packing. Enable it by default for T5
cards.

This is a T4 and T5 chip feature which lets the chip deliver multiple
Ethernet frames in a single buffer.  This is more efficient within the
chip, in the driver, and reduces wastage of space in rx buffers.

- Always allocate rx buffers from the jumbop zone, no matter what the
  MTU is.  Do not use the normal cluster refcounting mechanism.
- Reserve space for an mbuf and a refcount in the cluster itself and let
  the chip DMA multiple frames in the rest.
- Use the embedded mbuf for the first frame and allocate mbufs on the
  fly for any additional frames delivered in the cluster.  Each of these
  mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
Navdeep Parhar
480e603c79 Merge r254386 from user/np/cxl_tuning. Add an INET|INET6 check missing
in said revision.

r254386:
Flush inactive LRO entries periodically.
2013-08-29 06:26:22 +00:00
Navdeep Parhar
c93d567412 Whitespace nit. 2013-08-28 23:15:05 +00:00
Navdeep Parhar
319a31ea18 Change t4_list_lock and t4_uld_list_lock from mutexes to sx'es.
- tom_uninit had to be reworked not to hold the adapter lock (a mutex)
  around t4_deactivate_uld, which acquires the uld_list_lock.
- the ifc_match for the interface cloner that creates the tracer ifnet
  had to be reworked as the kernel calls ifc_match with the global
  if_cloners_mtx held.
2013-08-28 20:59:22 +00:00
Navdeep Parhar
9800517691 Add hooks in base cxgbe(4) for the iWARP upper-layer driver. Update a
couple of assertions in the TOE driver as well.
2013-08-28 20:45:45 +00:00
Navdeep Parhar
8a59745fca Use correct mailbox and PCIe PF number when querying RDMA parameters. 2013-08-26 19:02:52 +00:00
Navdeep Parhar
aa9a5cc05a There is no need to hold the freelist lock around alloc/free of
software descriptors.  This also silences WITNESS warnings when
the software descriptors are allocated with M_WAITOK.

MFC after:	1 week
2013-08-23 18:03:18 +00:00
Navdeep Parhar
2485eeee37 Display P/N information in the description.
Submitted by:	gnn
MFC after:	3 days
2013-08-20 18:22:04 +00:00
Navdeep Parhar
82342de26d Display temperature sensor data. Shows -1 if sensor not
available on the card.

# sysctl dev.t4nex.0.temperature
# sysctl dev.t5nex.0.temperature
2013-08-02 18:05:42 +00:00