Commit Graph

10 Commits

Author SHA1 Message Date
Peter Wemm
afa8862328 Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from.  There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code.  pmap uses
  a variation of the PAE code in order to avoid having to worry about 4
  levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
  i386 loader.  This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
  not been translated yet, and some that I cheated and wrote dumb C
  versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
  passing, as is native on the amd64 ABI), and the 'syscall' instruction
  for syscalls.  int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
  of places (eg: to find which register they use to replace the trashed
  %rcx register in the syscall instruction).  As a result, there is not a
  lot of similarity.  I did look at NetBSD a few times while debugging to
  get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
Peter Wemm
af3d516f55 Initiate de-orbit burn for USE_PCI_BIOS_FOR_READ_WRITE. This has been
#if'ed out for a while.  Complete the deed and tidy up some other bits.

We need to be able to call this stuff from outer edges of interrupt
handlers for devices that have the ISR bits in pci config space.  Making
the bios code mpsafe was just too hairy.  We had also stubbed it out some
time ago due to there simply being too much brokenness in too many systems.
This adds a leaf lock so that it is safe to use pci_read_config() and
pci_write_config() from interrupt handlers.  We still will use pcibios
to do interrupt routing if there is no acpi.. [yes, I tested this]

Briefly glanced at by:  imp
2003-02-18 03:36:49 +00:00
John Baldwin
c3ba1376f5 Add a function pci_probe_route_table() that returns true if our PCI BIOS
supports interrupt routing and if the specified PCI bus is present in the
routing table.
2002-09-06 22:15:44 +00:00
John Baldwin
8ab96fd8d0 - Add a pci_cfgintr_valid() function to see if a given IRQ is a valid
IRQ for an entry in a PCIBIOS interrupt routing ($PIR) table.
- Change pci_cfgintr() to except the current IRQ of a device as a fourth
  argument and to use that IRQ for the device if it is valid.
- If an intpin entry in a $PIR entry has a link of 0, it means that that
  intpin isn't connected to anything that can trigger an interrupt.  Thus,
  test the link against 0 to find invalid entries in the table instead of
  implicitly relying on the irqs field to be zero.  In the machines I have
  looked at, intpin entries with a link of 0 often have the bits for all
  possible interrupts for PCI devices set.
2002-09-06 17:08:07 +00:00
John Baldwin
4f99a443f0 Function prototypes don't need 'extern'. 2002-09-04 19:31:09 +00:00
Peter Wemm
573be82757 Detect a certain type of PCIBIOS brain damage. For some reason,
some bios vendors took it apon themselves to "censor" the
host->pci bridges from PCIBIOS callers, even when the caller
explicitly asks for them.  This includes certain Compaq machines
(eg: DL360) and some laptops.

If we detect this, shut down pcibios and revert to using IO
port bashing.

Under -current, apcica does a better job anyway.
2001-08-21 03:10:55 +00:00
Warner Losh
29f0d43398 Add types and prototypes.
Submitted by: msmith
2000-10-16 19:49:30 +00:00
Mike Smith
12a02d6efd Move the i386 PCI attachment code out of i386/isa back into i386/pci.
Split out the configuration space access primitives, as these are needed
elsewhere as well.
2000-10-02 07:11:13 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Stefan Eßer
5bec615793 Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .

The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...

This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.

A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:

1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
   and are probed like any "standard" PCI device.

The following features are currently missing, but will be added back,
soon:

1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets

This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00