Commit Graph

73 Commits

Author SHA1 Message Date
Baptiste Daroussin
2b7af31cf5 use .Mt to mark up email addresses consistently (part3)
PR:		191174
Submitted by:	Franco Fichtner  <franco at lastsummer.de>
2014-06-23 08:23:05 +00:00
Nathan Whitehorn
021c5b6dd0 Bump libcam shared library version forgotten in r259397.
Submitted by:	kib
2013-12-15 15:51:05 +00:00
Nathan Whitehorn
169a84dd18 Add missing header.
Submitted by:	Sean Bruno
2013-10-30 15:46:50 +00:00
Nathan Whitehorn
abe8350519 printf() specifier updates to CAM to handle either 32-bit or 64-bit lun_id_t.
MFC after:	2 weeks
2013-10-30 14:13:15 +00:00
Xin LI
21d1182ecf Fix a typo: XPORT_SPI should be tested against transport, nor protocol.
Submitted by:	Sascha Wildner <swildner dragonflybsd org>
Reviewed by:	mjacob
MFC after:	2 weeks
2013-06-03 21:52:19 +00:00
Jaakko Heinonen
75a0cc3bd6 Use snprintf(3) constantly when generating CAM error messages.
PR:		bin/57088
Submitted by:	Rui Lopes, arundel
MFC after:	2 weeks
2012-03-03 09:19:20 +00:00
Ed Schouten
6b99842ada Globally replace u_int*_t from (non-contributed) man pages.
The reasoning behind this, is that if we are consistent in our
documentation about the uint*_t stuff, people will be less tempted to
write new code that uses the non-standard types.

I am not going to bump the man page dates, as these changes can be
considered style nits. The meaning of the man pages is unaffected.

MFC after:	1 month
2012-02-12 18:29:56 +00:00
Ed Schouten
b3608ae18f Replace index() and rindex() calls with strchr() and strrchr().
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.

This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
2012-01-03 18:51:58 +00:00
Konstantin Belousov
7596eb4872 Bump shared libraries version numbers in preparation for 9.0.
This time, only libraries which ABI has been changed compared to
stable/8, are bumped.

ABI analysis done by:	Gleb Kurtsou
Approved by:	re (kensmith)
2011-08-28 09:26:48 +00:00
Kenneth D. Merry
06e794928b Add Serial Management Protocol (SMP) passthrough support to CAM.
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO.  The SMP CCB is
intended for SMP requests and responses.  The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target.  (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h:		New helper routines for SMP.  This includes
			SMP request building routines, response parsing
			routines, error decoding routines, and structure
			definitions for a number of SMP commands.

libcam/Makefile:	Add smp_all.c to libcam, so that SMP functionality
			is available to userland applications.

camcontrol.8,
camcontrol.c:		Add smp passthrough support to camcontrol.  Several
			new subcommands are now available:

			'smpcmd' functions much like 'cmd', except that it
			allows the user to send generic SMP commands.

			'smprg' sends the SMP report general command, and
			displays the decoded output.  It will automatically
			fetch extended output if it is available.

			'smppc' sends the SMP phy control command, with any
			number of potential options.  Among other things,
			this allows the user to reset a phy on a SAS
			expander, or disable a phy on an expander.

			'smpmaninfo' sends the SMP report manufacturer
			information and displays the decoded output.

			'smpphylist' displays a list of phys on an
			expander, and the CAM devices attached to those
			phys, if any.

cam.h,
cam.c:			Add a status value for SMP errors
			(CAM_SMP_STATUS_ERROR).

			Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

			Add support for SMP commands to cam_error_string().

cam_ccb.h:		Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH.  SMP
			commands are by nature bi-directional, and we may
			need to support bi-directional SCSI commands later.

			Add the XPT_SMP_IO CCB.  Since SMP commands are
			bi-directional, there are pointers for both the
			request and response.

			Add a fill routine for SMP CCBs.

			Add the XPT_GDEV_ADVINFO CCB.  This is currently
			used to fetch cached page 0x83 data from the
			transport later, but is extensible to fetch many
			other types of data.

cam_periph.c:		Add support in cam_periph_mapmem() for XPT_SMP_IO
			and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c:		Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h:	Add fields for VPD pages 0x00 and 0x83 in struct
			cam_ed.

scsi_all.c:		Add scsi_get_sas_addr(), a function that parses
			VPD page 0x83 data and pulls out a SAS address.

scsi_all.h:		Add VPD page 0x00 and 0x83 structures, and a
			prototype for scsi_get_sas_addr().

scsi_pass.c:		Add support for mapping buffers in XPT_SMP_IO and
			XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c:		In the SCSI probe code, first ask the device for
			VPD page 0x00.  If any VPD pages are supported,
			that page is required to be implemented.  Based on
			the response, we may probe for the serial number
			(page 0x80) or device id (page 0x83).

			Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files:		Add smp_all.c.

mps.c:			Add support for passing in a uio in mps_map_command(),
			so we can map a S/G list at once.

			Add support for SMP passthrough commands in
			mps_data_cb().  SMP is a special case, because the
			first buffer in the S/G list is outbound and the
			second buffer is inbound.

			Add support for warning the user if the busdma code
			comes back with more buffers than will work for the
			command.  This will, for example, help the user
			determine why an SMP command failed if busdma comes
			back with three buffers.

mps_pci.c:		Add sys/uio.h.

mps_sas.c:		Add the SAS address and the parent handle to the
			list of fields we pull from device page 0 and cache
			in struct mpssas_target.  These are needed for SMP
			passthrough.

			Add support for the XPT_SMP_IO CCB.  For now, this
			CCB is routed to the addressed device if it supports
			SMP, or to its parent if it does not and the parent
			does.  This is necessary because CAM does not
			currently support SMP-only nodes in the topology.

			Make SMP passthrough support conditional on
			__FreeBSD_version >= 900026.  This will make it
			easier to MFC this change to the driver without
			MFCing the CAM changes as well.

mps_user.c:		Un-staticize mpi_init_sge() so we can use it for
			the SMP passthrough code.

mpsvar.h:		Add a uio and iovecs into struct mps_command for
			SMP passthrough commands.

			Add a cm_max_segs field to struct mps_command so
			that we can warn the user if busdma comes back with
			too many segments.

			Clear the cm_reply when a command gets freed.  If
			it is not cleared, reply frames will eventually get
			freed into the pool multiple times and corrupt the
			pool.  (This fix is from scottl.)

			Add a prototype for mpi_init_sge().

sys/param.h:		Bump __FreeBSD_version to 900026 for the for the
			inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
			CAM CCBs.
2010-11-30 22:39:46 +00:00
Andriy Gapon
84803238a8 camlib.c: update one overlooked comment 2010-10-11 21:34:35 +00:00
Andriy Gapon
5bcc8fafda cam_get_device, cam_open_device: make behavior simpler and more deterministic
Remove or re-work support for the several features from the past:
- remove incomplete support for trimming slice/partition names
- remove mapping from old device names "sd" and "st"
- remove whitespace trimming
- remove unconditional skipping of leading 'r' in a device name
- skip leading 'n' or 'e' only if the following device name matches
  a list of known devices that support no-rewind and eject-on-close
  features; currently this is only sa(4)
- reflect the above changes in comments in code and in cam(3)
- remove a note cautioning against use of cam_get_device and
  cam_open_device in cam(3)

Reviewed by:	mjacob
2010-10-11 09:27:37 +00:00
Ulrich Spörlein
0d9deed52c mdoc: drop redundant .Pp and .LP calls
They have no effect when coming in pairs, or before .Bl/.Bd
2010-10-08 12:40:16 +00:00
Joel Dahl
f6ac23919b Fix typos and spelling mistakes. 2010-08-06 14:33:42 +00:00
Ulrich Spörlein
aa12cea2cc mdoc: order prologue macros consistently by Dd/Dt/Os
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.

Reviewed by:	ru
Approved by:	philip, ed (mentors)
2010-04-14 19:08:06 +00:00
Ed Schouten
daaf575910 Build lib/ with WARNS=6 by default.
Similar to libexec/, do the same with lib/. Make WARNS=6 the norm and
lower it when needed.

I'm setting WARNS?=0 for secure/. It seems secure/ includes the
Makefile.inc provided by lib/. I'm not going to touch that directory.
Most of the code there is contributed anyway.
2010-01-02 09:58:07 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Marius Strobl
25ea4c843f Supply a valid Connect ID when issuing XPT_DEV_MATCH, which
according to my reading of the CAM draft is mandatory for
all CCB function calls and enforced by xptioctl() since at
least r168752. Previously we happened to use 0 as the Path
ID, causing the XPT_DEV_MATCH call to fail if there's no
SCSI bus 0. Basically the same bug was also fixed the same
way for camcontrol(8) as part of r126514.

PR:		127605
Submitted by:	Eygene Ryabinkin
Approved by:	silence from ken and scottl
MFC after:	1 week
2008-10-27 21:46:58 +00:00
Matt Jacob
bd3fd815a7 2nd and final commit that moves us to CAM_NEW_TRAN_CODE
as the default.

Reviewed by multitudes.
2006-11-02 00:54:38 +00:00
Joe Marcus Clarke
a7a6dfbd14 Go with a different version of the previous patch so to preserve errno.
Approved by:	scottl (implicit)
2006-04-30 07:08:43 +00:00
Joe Marcus Clarke
8bc181f506 Fix a file descriptor leak in cam_lookup_pass() when the ioctl to find
the passthru device fails.

Approved by:	scottl
MFC after:	1 day
2006-04-30 07:02:40 +00:00
Xin LI
ae73eb3a7f Better memory handling:
- It is acceptable to call free(3) when the given pointer itself
   is NULL, so we do not need to determine NULL before passing
   a pointer to free(3)
 - Handle failure of malloc(3)

MT6/5 Candidate

Submitted by:	Dan Lukes <dan at obluda cz>
PR:		bin/83352
2005-07-13 10:40:07 +00:00
Ruslan Ermilov
0227791b40 Expand *n't contractions. 2005-02-13 22:25:33 +00:00
Scott Long
c893420ff0 Change a couple of comments so that GCC doesn't think that they contain
tri-graphs.
2004-07-29 15:35:45 +00:00
Ruslan Ermilov
30950a21e1 Eliminate double whitespace. 2004-07-03 22:30:10 +00:00
Ruslan Ermilov
1a0a934547 Mechanically kill hard sentence breaks. 2004-07-02 23:52:20 +00:00
Ruslan Ermilov
47d7e8a96f Fixed style of DPADD and LDADD assignments as per style.Makefile(5). 2004-02-05 22:44:25 +00:00
Ruslan Ermilov
fe08efe680 mdoc(7): Use the new feature of the .In macro. 2003-09-08 19:57:22 +00:00
Gordon Tetlow
41d8423f71 Stage 3 of dynamic root support. Make all the libraries needed to run
binaries in /bin and /sbin installed in /lib. Only the versioned files
reside in /lib, the .so symlink continues to live /usr/lib so the
toolchain doesn't need to be modified.
2003-08-17 08:28:46 +00:00
Kenneth D. Merry
50a7fdaed8 Remove MAINTAINER= lines in the makefiles for camcontrol, iostat, libcam
and libdevstat, since the new way of doing things is to just list
maintainership in src/MAINTAINERS.

Also, remove duplicate entries in src/MAINTAINERS for those utilities.  I
already had entries for them.
2003-06-14 05:28:01 +00:00
Jens Schweikhardt
57bd0fc6e8 english(4) police. 2002-12-27 12:15:40 +00:00
Mike Barcroft
52082f69a5 Don't depend on <sys/types.h> pollution in <fcntl.h>. 2002-09-16 07:18:27 +00:00
Kenneth D. Merry
9460610494 string cleanup:
- fix a potential overrun made worse by rev 1.5 of camlib.h
 - change strncpy() and strcpy() calls to strlcpy()
 - use sizeof(string[]) instead of STRING_LEN to avoid future problems
 - get rid of an unused variable

Thanks to BDE for pointing out some of the problems.

MFC after:	2 weeks
2002-05-14 04:32:02 +00:00
David E. O'Brien
bf8aef63e1 Do not +1 with MAXPATHLEN.
Reviewed by:	imp
2002-04-23 23:58:20 +00:00
Kelly Yancey
cb28eb78cb Const'ify the CDB format string passed to the CDB parsing routines
(csio_decode_visit() and family).

Reviewed by:	ken
2001-12-18 00:48:44 +00:00
Ruslan Ermilov
32eef9aeb1 mdoc(7) police: Use the new .In macro for #include statements. 2001-10-01 16:09:29 +00:00
Matthew Dillon
090f02d93c Add __FBSDID()s to libcam 2001-09-30 21:13:43 +00:00
Kris Kennaway
6dac8ac9e5 Mark some functions as __printflike() and/or taking const char * arguments
instead of char *.

MFC after:	2 weeks
2001-08-20 12:53:36 +00:00
Ruslan Ermilov
753d686d34 mdoc(7) police: s/BSD/.Bx/ where appropriate. 2001-08-14 10:01:54 +00:00
Ruslan Ermilov
94ba280c59 mdoc(7) police: join split punctuation to macro calls. 2001-08-10 17:35:21 +00:00
Ruslan Ermilov
57e4378bf6 mdoc(7) police: protect trailing full stops of abbreviations
with a trailing zero-width space: `e.g.\&'.
2001-08-10 13:45:36 +00:00
Dima Dorfman
7ebcc426ef Remove whitespace at EOL. 2001-07-15 07:53:42 +00:00
Ruslan Ermilov
a307d59838 mdoc(7) police: removed HISTORY info from the .Os call. 2001-07-10 13:41:46 +00:00
Dima Dorfman
70d51341bf mdoc(7) police: remove extraneous .Pp before and/or after .Sh. 2001-07-09 09:54:33 +00:00
Matt Jacob
3d09a65d42 Make sure you don't have a file descriptor leak for the 'real'
underlying CAM device. This needs to be checked not only in
the open routine, but the device->fd has to be initialized
as well.

PR:		28688
Submitted (partially) by:	T. William Wells <bill@twwells.com>
MFC after:	2 weeks
2001-07-04 07:43:10 +00:00
Ruslan Ermilov
4a558355e5 MAN[1-9] -> MAN. 2001-03-27 17:27:19 +00:00
Kenneth D. Merry
3393f8daa3 Rewrite of the CAM error recovery code.
Some of the major changes include:

	- The SCSI error handling portion of cam_periph_error() has
	  been broken out into a number of subfunctions to better
	  modularize the code that handles the hierarchy of SCSI errors.
	  As a result, the code is now much easier to read.

	- String handling and error printing has been significantly
	  revamped.  We now use sbufs to do string formatting instead
	  of using printfs (for the kernel) and snprintf/strncat (for
	  userland) as before.

	  There is a new catchall error printing routine,
	  cam_error_print() and its string-based counterpart,
	  cam_error_string() that allow the kernel and userland
	  applications to pass in a CCB and have errors printed out
	  properly, whether or not they're SCSI errors.  Among other
	  things, this helped eliminate a fair amount of duplicate code
	  in camcontrol.

	  We now print out more information than before, including
	  the CAM status and SCSI status and the error recovery action
	  taken to remedy the problem.

	- sbufs are now available in userland, via libsbuf.  This
	  change was necessary since most of the error printing code
	  is shared between libcam and the kernel.

	- A new transfer settings interface is included in this checkin.
	  This code is #ifdef'ed out, and is primarily intended to aid
	  discussion with HBA driver authors on the final form the
	  interface should take.  There is example code in the ahc(4)
	  driver that implements the HBA driver side of the new
	  interface.  The new transfer settings code won't be enabled
	  until we're ready to switch all HBA drivers over to the new
	  interface.

src/Makefile.inc1,
lib/Makefile:		Add libsbuf.  It must be built before libcam,
			since libcam uses sbuf routines.

libcam/Makefile:	libcam now depends on libsbuf.

libsbuf/Makefile:	Add a makefile for libsbuf.  This pulls in the
			sbuf sources from sys/kern.

bsd.libnames.mk:	Add LIBSBUF.

camcontrol/Makefile:	Add -lsbuf.  Since camcontrol is statically
			linked, we can't depend on the dynamic linker
			to pull in libsbuf.

camcontrol.c:		Use cam_error_print() instead of checking for
			CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9:			Change the prototypes for sbuf_cat() and
			sbuf_cpy() so that the source string is now a
			const char *.  This is more in line wth the
			standard system string functions, and helps
			eliminate warnings when dealing with a const
			source buffer.

			Fix a typo.

cam.c:			Add description strings for the various CAM
			error status values, as well as routines to
			look up those strings.

			Add new cam_error_string() and
			cam_error_print() routines for userland and
			the kernel.

cam.h:			Add a new CAM flag, CAM_RETRY_SELTO.

			Add enumerated types for the various options
			available with cam_error_print() and
			cam_error_string().

cam_ccb.h:		Add new transfer negotiation structures/types.

			Change inq_len in the ccb_getdev structure to
			be "reserved".  This field has never been
			filled in, and will be removed when we next
			bump the CAM version.

cam_debug.h:		Fix typo.

cam_periph.c:		Modularize cam_periph_error().  The SCSI error
			handling part of cam_periph_error() is now
			in camperiphscsistatuserror() and
			camperiphscsisenseerror().

			In cam_periph_lock(), increase the reference
			count on the periph while we wait for our lock
			attempt to succeed so that the periph won't go
			away while we're sleeping.

cam_xpt.c:		Add new transfer negotiation code.  (ifdefed
			out)

			Add a new function, xpt_path_string().  This
			is a string/sbuf analog to xpt_print_path().

scsi_all.c:		Revamp string handing and error printing code.
			We now use sbufs for much of the string
			formatting code.  More of that code is shared
			between userland the kernel.

scsi_all.h:		Get rid of SS_TURSTART, it wasn't terribly
			useful in the first place.

			Add a new error action, SS_REQSENSE.  (Send a
			request sense and then retry the command.)
			This is useful when the controller hasn't
			performed autosense for some reason.

			Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.  Selection
			timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.

			Get rid of the last vestiges of a read/write
			interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files:		Add bsearch.c, which is needed for some of the
			new table lookup routines.

aic7xxx_freebsd.c:	Define AHC_NEW_TRAN_SETTINGS if
			CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c:		Add the appropriate #ifdefs so sbufs can
			compile and run in userland.

			Change sbuf_printf() to use vsnprintf()
			instead of kvprintf(), which is only available
			in the kernel.

			Change the source string for sbuf_cpy() and
			sbuf_cat() to be a const char *.

			Add __BEGIN_DECLS and __END_DECLS around
			function prototypes since they're now exported
			to userland.

kdump/mkioctls:		Include stdio.h before cam.h since cam.h now
			includes a function with a FILE * argument.

Submitted by:	gibbs (mostly)
Reviewed by:	jdp, marcel (libsbuf makefile changes)
Reviewed by:	des (sbuf changes)
Reviewed by:	ken
2001-03-27 05:45:52 +00:00
David E. O'Brien
dfb54b7422 Remove the `r' devices. 2001-02-27 23:29:13 +00:00
Ruslan Ermilov
ed40311694 mdoc(7) police: removed history info from the .Os FreeBSD call. 2000-12-14 11:52:05 +00:00
Ruslan Ermilov
b5c508fba3 Use Fx macro wherever possible. 2000-11-14 11:20:58 +00:00