Extend OptionalObsoleteFiles.inc to delete all lib32 files when MK_LIB32 is
set to no on a system that previously had lib32 libraries installed.
Also, to prevent "make delete-old-dirs" from always deleting lib32 directories
after an installworld, move the lib32 subtree to its own mtree file that only
gets applied when MK_LIB32=yes.
Test: Ran "make delete-old" and "make delete-old-libs" on a system that never
had MK_LIB32 enabled, and on a system where MK_LIB32 was enabled and later
disabled. Did this both on amd64 and powerpc64.
Test: Ran "make tinderbox" without errors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D3923
bin/dd/tests
Ensure fdescfs is mounted on /dev/fd/ for the length testcase as it's used
in validating the characters read from /dev/zero
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- Make the requirements more complete for the testcases
- Detect prerequisites so the tests won't fail (zfs.ko is loaded, zpool(1)
is available, ACL support is enabled with UFS, etc).
- Work with temporary files/directories/mountpoints that work with atf/kyua
- Limit the testcases to work on temporary filesystems to reduce tainting the
test host
MFC after: 2 weeks
Reviewed by: trasz (earlier version)
Differential Revision: https://reviews.freebsd.org/D3810
test suite as tests/sys/posixshm
Some other highlights:
- Convert the testcases over to ATF
- Don't use hardcoded paths to /tmp (which violate the ATF/kyua samdbox); use
mkstemp to generate temporary paths for non-SHM_ANON shm objects.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
leap second date correct
Updates to the file can be obtained from ftp://time.nist.gov/pub/ or
ftp://tycho.usno.navy.mil/pub/ntp/.
Suggested by: dwmalone
Reviewed by: roberto, dwmalone, delphij
Approved by: roberto
MFC after: 1 week
bug of installing 'realtek' and 'intel_iwn' as files rather then as
a 'LICENSE' file in their directories.
Also add obsolete entries for the older names and names that existed in head
for a period of time.
Suggested by: jmg
X-MFC-With: r289391
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
target. This is the feeder for mergemaster / etcupdate. This change
makes installworld/mergemaster/etcupdate behave the same regardless of
whether SENDMAIL_MC or SENDMAIL_CF is used.
If you use a custom SENDMAIL_MC/CF in make.conf and excluded it from
mergemaster.rc/etcupdate.conf to work around the conflicts, you may wish
to revert that or change it from 'ignore' to 'always install'.
If you do not use a custom SENDMAIL_MC/CF, there should be no change in
behavior.
the FreeBSD test suite
functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around libarchive_test, bsdcpio_test, and bsdtar_test provided
by upstream.
A handful of testcases in lib/libarchive/tests have been disabled as they
were failing when run with kyua test (see BROKEN_TESTS in
lib/libarchive/tests/Makefile)
As a sidenote: this removes the check/test targets from the Makefiles as they
don't match the pattern used in the rest of the FreeBSD test suite.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Simplifying maintainance and options (only one place to deal with MK_DMAGENT)
This also makes packaging base less intrusive by getting a single point where
to add tags.
The functional_test.sh harness for each test subdir was inspired
by the version in bin/sh/tests/functional_test.sh
Some gymnastics were required to deal with implicit rules for
.c / .o -> .out as the suffix transformation rules were
incorrectly trying to create the test outputs from some of the
source files
Sponsored by: EMC / Isilon Storage Division
the console is attached to. This makes this file identical to the 32-bit
arm version of this file.
Obtained from: EuroBSDCon devsummit
Sponsored by: ABT Systems Ltd
the module is built-in to the kernel then the kldunload will fail. Rather
than do this just check if there are rules and then remove them all.
Add requirement on FILESYSTEMS to ensure /usr is present for /usr/sbin/ugidfw
and /usr/bin/xargs. This was already effectively the ordering from rcorder(8).
MFC after: 2 weeks
Relnotes: yes
* Allow the user to configure the login class to use in rc.conf
by using {daemon}_login_class, which;
* Use the daemon class by default;
* .. and then use 'limits' to set the login class so it works both
via init at startup (which runs this in 'daemon' class) and via
whichever root environment (eg command line, other daemons, etc.)
Reviewed by: dteske
Differential Revision: https://reviews.freebsd.org/D3630
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
o In pccard_ether add code to start children of a 802.11
device, that are configured in rc.conf.
o In devd.conf provide a regex matching all 802.11 devices,
and on match run pccard_ether to spawn children.
PR: 202784
Submitted by: <vidwer gmail.com>
In collaboration with: "Oleg V. Nauman" <oleg opentransfer.com>
connectivity interact with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
users who uses only FreeBSD -CURRENT, and building these indexes are
only useful to those who share ports tree across different FreeBSD
releases, and system administrator with that need can always enable
this behavior.
MFC after: 2 weeks (only the principals, not actual change)
devices in /dev/dri/ with this new group.
This will allow ports and users to more easily access to these devices
for OpenGL and OpenCL support.
Reviewed by: dumbbell@
Approved by: dumbbell@
Differential Revision: https://reviews.freebsd.org/D1260
with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:
https://wiki.freebsd.org/projects/ifnet/net80211
Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.
Differential Revision: D2655, D2740
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
setups that worked before, flip the default to "YES". Most people don't
have /etc/rctl.conf, so they won't be affected in any way.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
I also changed ${...%*/rc.d} to ${...%/rc.d} since the shortest match always
has an empty string for the asterisk.
PR: 201641
Submitted by: Jamie Landeg-Jones (original version)
MFC after: 1 week
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
for a long time, quota(1) utility supported only PF_INET.
- Clean up confusing changes in f_mntfromname.
- Add an entry for rquotad with rpc/udp6 to inetd.conf.
PR: 194084
I've been doing this ever since there were tables
coudl make more efficient by using "in recv" and "out xmit" instead of via
but I'll leave that.
MFC after: 1 week
This should make all consoles available, whether it
is VGA, HDMI, serial, or JTAG, but more importantly
enables all consoles when ttyu0 is not predictable.
For example, the Pandaboard ES apparently has three
consoles available, but the DB9/RS232 serial port is
ttyu2, so not available by default after the system
boots.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
target. This effectively reverts r261142, which reverted both
r261031 and r261044.
Prodded by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation