Enable evdev on ppc32 as well, similar to what was done i386 and amd64 in
r340387 and ppc64 in r340632.
Evdev can be used by X and is used by wayland to handle input devices.
Approved by: jhibbits
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18049
The update of jemalloc to 5.1.0 exposed a cache syncing issue on a Freescale
e500 base system. There was already code in the FPU emulator to address
this, but it was limited to a single static variable, and did not attempt to
sync the cache. This pulls that out to the higher level program exception
handler, and syncs the cache.
If a SIGILL is hit a second time at the same address, it will be treated as
a real illegal instruction, and handled accordingly.
Enable evdev on ppc64 as well, similar to what was done for amd64 and i386
in r340387.
Evdev can be used by X and is used by wayland to handle input devices.
Approved by: mmacy
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18026
Maxmem is the highest address for physical memory in the system. It's
measured in pages which, since max() returns a u_int, should allow for up to
2^44 bytes of memory addressable by the system. However, on POWER9 systems
at least, memory addressed by additional socketed CPUs begins at addresses
far above the 2^44 mark, causing issues with memory accesses and DMA, when
memory is addressed on the auxiliary CPUs. Use the MAX() macro instead,
which doesn't convert arguments, so retains Maxmem and all calculations as
its defined long type (64-bit on powerpc64), keeping the maximum address
correct.
Submitted by: mmacy
Summary: When compiling for ELFv2, it is necessary to adjust the offset to
get_spr and factor in the function prologue to ensure the correct instruction is
being edited.
Test Plan:
Before:
```
db> show spr 110
KDB: reentering
KDB: stack backtrace:
0xc008000020fb96e0: at 0xc000000002bb2e34 = kdb_backtrace+0x68
0xc008000020fb97f0: at 0xc000000002bb3798 = kdb_reenter+0x54
0xc008000020fb9860: at 0xc000000002f87090 = trap+0x4e4
0xc008000020fb9990: at 0xc000000002f78a60 = powerpc_interrupt+0x110
0xc008000020fb9a20: kernel trap 0xe40 by 0xc000000002401978 = get_spr+0x8: srr1=0x9000000000001032
r1=0xc008000020fb9cd0 cr=0x80009438 xer=0x20040000 ctr=0xc000000002f7b40c r2=0xc0000000037fd000
saved LR(0xfffffffffffffffb) is invalid.
```
After:
```
db> show spr 110
SPR 272(110): c000000003cae900
```
Submitted by: git_bdragon.rtk0.net
Differential Revision: https://reviews.freebsd.org/D17813
It seems this tag is causing problems on POWER9 systems. Since no POWER9 user
has encountered the problem fixed by r339589 just restrict it to POWER8 for now.
A better fix will likely be to update powerpc/busdma_machdep.c to handle the
window correctly.
Reported by: mmacy, others
'sync' is pretty heavy-handed, and is unnecessary for this use case. It's a
full barrier, which is applicable for all storage types. However,
atomic_load_acq_*() is only expected to operate on physical memory, not
device memory, so lwsync is sufficient (lwsync provides access ordering on
memory that is marked as Coherency Required and is not Write Through nor
Cache Inhibited). On 32-bit systems, this is a nop, since powerpc_lwsync()
is defined to use sync, as a workaround for a silicon bug in the Freescale
e500 core.
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
Especially on new POWER9 systems, the console can be filled with
SMP: AP CPU #XX launched
messages. This can also slow down the console printing. Instead, do what
x86 now does, as of r333335, and print it all on one line, unless
bootverbose is set.
Add a new 'debugger_on_trap' knob separate from 'debugger_on_panic'
and make the calls to kdb_trap() in MD fatal trap handlers prior to
calling panic() conditional on this new knob instead of
'debugger_on_panic'. Disable the new knob by default. Developers who
wish to recover from a fatal fault by adjusting saved register state
and retrying the faulting instruction can still do so by enabling the
new knob. However, for the more common case this makes the user
experience for panics due to a fatal fault match the user experience
for other panics, e.g. 'c' in DDB will generate a crash dump and
reboot the system rather than being stuck in an infinite loop of fatal
fault messages and DDB prompts.
Reviewed by: kib, avg
MFC after: 2 months
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17768
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
The number of fans on a PowerMac7,3 with liquid cooling is 9.
Reviewed by: andreast@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17754
It seems if a Radeon card is already initialized by u-boot, it won't be
reinitialized by the kernel, and the DRM module will fail to attach. This
steals the reset code from mips/octopci.c to blindly reset the bus on attach.
This was tested on a AmigaOne X5000/20, such that it can be booted from the
local video console, and get a video console in FreeBSD.
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
Further investigation of issues with 32-bit DMA on PowerNV revealed that
its window is hardcoded by OPAL (at least in skiboot version 5.4.9) and
cannot be changed by the OS.
Thus, now jhb suggestion of limiting the range in PCI DMA tag seems
the best way to deal with it.
Reviewed by: jhibbits, nwhitehorn, sbruno
Approved by: jhibbits(mentor)
Differential Revision: https://reviews.freebsd.org/D17601
si_addr is the address of the instruction executing at the time the
signal was sent. Populate this field with srr0, which, though not
always the case, is most often the instruction that triggered the fault.
debugf() is unnecessary for the TLB printing functions, as they're only
intended to be used from ddb. Instead, make them full DDB 'show'
commands, so now it can be written as 'show tlb1' and 'show tlb0'
instead of calling the function, hoping DEBUG has been defined.
This driver was already 99% identical to the ofw_pcib_pci driver, except for
the attachment. Since ofw_pcib_pci is already a subclass of pcib, this
creates a private declaration of that class, to use for the base class for
this driver.
At some point in the future, ofw_pcib_pci_driver should probably be exported
to a header, so we're not tracking the softc struct contents, but for now,
since there's only this one other driver, it's not a pressing issue.
r279252 inverted the logic in moea64_scan_init, such that instead of
terminating when reaching a dead page, it terminates when reaching a live
page, ostensibly preserving exactly one page of KVA.
The Signal Processing Engine (SPE) found in Freescale e500 cores (and
others) offloads IEEE-754 compliance (NaN, Inf handling, overflow,
underflow) to software, most likely as a means of simplifying the APU
silicon. Some software, like AbiWord, needs full IEEE-754 compliance,
including NaN handling. Implement the necessary bits to enable it.
Differential Revision: https://reviews.freebsd.org/D17446
At early boot, PCPU_GET(), that obtains a pointer from SPRG0, was being
used with SPRG0 not yet initialized. If it pointed to an invalid
address, the machine would hang.
Approved by: re(gjb), jhibbits(mentor)
Discussing with Benjamin Herrenschmidt, OPAL_INT_GET_XIRR masks the
returned priority, so must be resumed before more interrupts can be
handled at this priority. Since there are only two priorities used in
FreeBSD, we know that the previous priority in an EOI will always be
0xff (lowest priority).
Reviewed by: nwhitehorn
Approved by: re(rgrimes)
Differential Revision: https://reviews.freebsd.org/D17361
Summary:
Discussing with Benjamin Herrenschmidt, MSIs, and edge-triggered
interrupts in general, must not be masked in XICS and XIVE, else
subsequent interrupts may be ignored.
Testing locally on my Talos II (single CPU, 18-core POWER9), NVMe now
works with MSI, improving read throughput by ~70% (900MB/s -> 1.67GB/s,
with 64MB block size) over INTx interrupts, and snd_hda(4) now will
actually play music with MSI. Previously, snd_hda(4) would not receive
interrupts, timing out, and declaring the channels dead.
This has also been tested by Kevin Bowling, and others, with great
success. Kevin reported NVMe unusable on his Talos II prior to this
patch.
Reviewed by: nwhitehorn, kbowling
Approved by: re(rgrimes)
Differential Revision: https://reviews.freebsd.org/D17356
The PHB4 host bridge used by the POWER9 uses a 64kB range in 32-bit
space at the address 0xffff0000-0xffffffff. Reserve this range so that
DMA memory cannot be allocated within this range. This fixes seemingly
random crashes on a POWER9 system. Ideally this range will have been
reserved by the firmware, but as of now this is not the case.
Submitted by: git_bdragon.rtk0.net
Reviewed by: nwhitehorn
Approved by: re(kib)
Differential Revision: https://reviews.freebsd.org/D17183
This patch adds the very initial support for HTM that might come at FreeBSD
version 12.1. This basic support defines a new kABI, so, we do not need to change
it later during 12.1 time frame, when the full implementation will come.
Reviewed by: jhibbits
Approved by: re(marius), jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D16889
error in the function hypercall_memfree(), where the wrong arena was being
passed to kmem_free().
Introduce a per-page flag, VPO_KMEM_EXEC, to mark physical pages that are
mapped in kmem with execute permissions. Use this flag to determine which
arena the kmem virtual addresses are returned to.
Eliminate UMA_SLAB_KRWX. The introduction of VPO_KMEM_EXEC makes it
redundant.
Update the nearby comment for UMA_SLAB_KERNEL.
Reviewed by: kib, markj
Discussed with: jeff
Approved by: re (marius)
Differential Revision: https://reviews.freebsd.org/D16845
The boot-time ifunc resolver assumes that it only needs to apply
IRELATIVE relocations to PLT entries. With an upcoming optimization,
this assumption no longer holds, so add the support required to handle
PC-relative relocations targeting GNU_IFUNC symbols.
- Provide a custom symbol lookup routine that can be used in early boot.
The default lookup routine uses kobj, which is not functional at that
point.
- Apply all existing relocations during boot rather than filtering
IRELATIVE relocations.
- Ensure that we continue to apply ifunc relocations in a second pass
when loading a kernel module.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16749
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)
Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
- In configurations with a pseudo devices section, move 'device crypto'
into that section.
- Use a consistent comment. Note that other things common in kernel
configs such as GELI also require 'device crypto', not just IPSEC.
Reviewed by: rgrimes, cem, imp
Differential Revision: https://reviews.freebsd.org/D16775
The canonical form of sync is:
sync L, E (if Category Elemental Memory Barriers implemented)
The L bits (2) denote the type of sync:
0 -- hwsync
1 -- lwsync
2 -- ptesync or hwsync
It's been found that most 32-bit CPUs designed prior to the introduction of
lwsync will ignore the L bits. However, some cores, particularly the e500 core,
will trigger an illegal instruction exception. Adding these variants will make
it easier to see which sync variant is actually being used in case of a trap.
If OPAL_RTC_READ is busy and does not return the information on the first run,
as returning OPAL_BUSY_EVENT, the system will crash since ymd and hmsm variable
will contain junk values.
This is happening because we were not calling OPAL_RTC_READ again after
OPAL_POLL_EVENTS' return, which would finally replace the old/junk hmsm and ymd
values.
The code was also mixing OPAL_RTC_READ and OPAL_POLL_EVENTS return values.
This patch fix this logic and guarantee that we call OPAL_RTC_READ after
OPAL_POLL_EVENTS return, and guarantee the code will only proceed if
OPAL_RTC_READ returns OPAL_SUCCESS.
Reviewed by: jhibbits
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D16617
This is an OFW initrd module that would load the initrd from device tree
parameters and give the to the md driver.
With this patch, it is possible to pass a rootfs image through kexec in PowerNV
mode (powerpc64). In order to user it, you should set the MD_ROOT_MEM option in
your kernel configuration.
Reviewed by: jhibbits
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D15705
I had naively assumed that building kernel would be sufficient to test that
the header is sane. However, it turns out this now needs -fms-extensions to
build. Rather than sprinkling -fms-extensions all over the place, revert
for now, and revisit with a better fix.
Summary:
Ports like sysutils/lsof troll through kernel structures, and
therefore include kernel headers and all the dirty secrets involved. struct
vm_page includes the struct md_page inline, which currently is only defined
if AIM or BOOKE is defined. Thus, by default, sysutils/lsof cannot build,
due to the struct md_page having an incomplete type. Fix this by merging
the two struct definitions into an anonymous struct-union.
A similar change could be made to unify the pmap structures as well.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D16232
* FreeBSD stores addresses in 8 bit format, but the OPAL API requires the 7-bit
address, and encodes the direction elsewhere. Behave like other i2c drivers,
and shift accordingly.
* The OPAL API can already handle multiple requests in flight. Change the async
token to be private to the thread, so as not to stomp across i2c accesses,
remove the limitation error message, and use the correct message index to
transfer all messages in the list.
* Micro-optimize the async handler to not continuously call pmap_kextract() when
spin-waiting for the operation to complete.
This has been tested by hexdumping an EEPROM attached via the icee(4) driver.
