Commit Graph

15 Commits

Author SHA1 Message Date
sam
0a78164dde o add a flags parameter to netisr_register that is used to specify
whether or not the isr needs to hold Giant when running; Giant-less
  operation is also controlled by the setting of debug_mpsafenet
o mark all netisr's except NETISR_IP as needing Giant
o add a GIANT_REQUIRED assertion to the top of netisr's that need Giant
o pickup Giant (when debug_mpsafenet is 1) inside ip_input before
  calling up with a packet
o change netisr handling so swi_net runs w/o Giant; instead we grab
  Giant before invoking handlers based on whether the handler needs Giant
o change netisr handling so that netisr's that are marked MPSAFE may
  have multiple instances active at a time
o add netisr statistics for packets dropped because the isr is inactive

Supported by:	FreeBSD Foundation
2003-11-08 22:28:40 +00:00
sam
824c573f46 revert default for idle polling to zero until we can resolve the
livelock problem
2003-10-20 21:14:24 +00:00
sam
86d3289c1b Change default for kern.polling.idle_poll back to 1. This was set to 0
because Luigi observed livelock but in recent testing it did not occur
so I'm re-enabling it by default.

Reviewed by:	luigi
2003-10-14 18:39:36 +00:00
obrien
97ddbdc5a1 Use __FBSDID(). 2003-06-11 00:56:59 +00:00
jlemon
8d19d664ac Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
sobomax
8df6eb246b Increase size of ifnet.if_flags from 16 bits (short) to 32 bits (int). To avoid
breaking application ABI use unused ifreq.ifru_flags[1] for upper 16 bits in
SIOCSIFFLAGS and SIOCGIFFLAGS ioctl's.

Reviewed by:	-hackers, -net
2002-08-18 07:05:00 +00:00
luigi
e84a96bf71 Temporarily disable polling when no processes are active, while I
investigate the problem described below.

I am seeing some strange livelock on recent -current sources with
a slow box under heavy load, which disappears with this change.
This might suggest some kind of problem (either insufficient locking,
or mishandling of priorities) in the poll_idle thread.
2002-08-04 21:00:49 +00:00
julian
eb010f76be Part 1 of KSE-III
The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test program (in tools)

Reviewed by:	Almost everyone who counts
	(at various times, peter, jhb, matt, alfred, mini, bernd,
	and a cast of thousands)

	NOTE: this is still Beta code, and contains lots of debugging stuff.
	expect slight instability in signals..
2002-06-29 17:26:22 +00:00
luigi
68584cdbc3 Remove a printf and add a comment on an assumption that could be
occasionally violated by device drivers.
2002-06-27 23:23:04 +00:00
luigi
df7b634860 Make the DEVICE_POLLING code compile with -Werror and in LINT 2002-03-09 08:02:52 +00:00
luigi
dfbf5feaeb Make this compile after changes to kse structures.
This escaped because DEVICE_POLLING is disabled in LINT being
not compatible with SMP. In fact, it is only a runtime problem,
so if we could recognize that we are building a LINT kernel
we could as well disable the check for SMP being defined.

Reported-by: Joe Clarke
2002-02-15 02:50:07 +00:00
luigi
4e754f8e67 MFS: synchronize the code with the version in -stable, specifically:
+ SYSCTL_ULONG -> SYSCTL_UINT
 + some procedure renaming and variable rearrangement
 + fix the 'interface going deaf' problem same as in -stable.
2002-02-11 23:56:18 +00:00
julian
5c85128ac6 In a threaded world, differnt priorirites become properties of
different entities.  Make it so.

Reviewed by:	jhb@freebsd.org (john baldwin)
2002-02-11 20:37:54 +00:00
luigi
88532c8a5a Complete the device polling support by adding a thread in charge
of polling interfaces at the lowest possible priority
(this might result in softnetisr being scheduled, but there is
no risk of livelock because they have a higher priority than
this thread).
2001-12-19 00:53:24 +00:00
luigi
98652c95c9 Device Polling code for -current.
Non-SMP, i386-only, no polling in the idle loop at the moment.

To use this code you must compile a kernel with

        options DEVICE_POLLING

and at runtime enable polling with

        sysctl kern.polling.enable=1

The percentage of CPU reserved to userland can be set with

        sysctl kern.polling.user_frac=NN (default is 50)

while the remainder is used by polling device drivers and netisr's.
These are the only two variables that you should need to touch. There
are a few more parameters in kern.polling but the default values
are adequate for all purposes. See the code in kern_poll.c for
more details on them.

Polling in the idle loop will be implemented shortly by introducing
a kernel thread which does the job. Until then, the amount of CPU
dedicated to polling will never exceed (100-user_frac).
The equivalent (actually, better) code for -stable is at

	http://info.iet.unipi.it/~luigi/polling/

and also supports polling in the idle loop.

NOTE to Alpha developers:
There is really nothing in this code that is i386-specific.
If you move the 2 lines supporting the new option from
sys/conf/{files,options}.i386 to sys/conf/{files,options} I am
pretty sure that this should work on the Alpha as well, just that
I do not have a suitable test box to try it. If someone feels like
trying it, I would appreciate it.

NOTE to other developers:
sure some things could be done better, and as always I am open to
constructive criticism, which a few of you have already given and
I greatly appreciated.
However, before proposing radical architectural changes, please
take some time to possibly try out this code, or at the very least
read the comments in kern_poll.c, especially re. the reason why I
am using a soft netisr and cannot (I believe) replace it with a
simple timeout.

Quick description of files touched by this commit:

sys/conf/files.i386
        new file kern/kern_poll.c
sys/conf/options.i386
        new option
sys/i386/i386/trap.c
        poll in trap (disabled by default)
sys/kern/kern_clock.c
        initialization and hardclock hooks.
sys/kern/kern_intr.c
        minor swi_net changes
sys/kern/kern_poll.c
        the bulk of the code.
sys/net/if.h
        new flag
sys/net/if_var.h
        declaration for functions used in device drivers.
sys/net/netisr.h
        NETISR_POLL
sys/dev/fxp/if_fxp.c
sys/dev/fxp/if_fxpvar.h
sys/pci/if_dc.c
sys/pci/if_dcreg.h
sys/pci/if_sis.c
sys/pci/if_sisreg.h
        device driver modifications
2001-12-14 17:56:12 +00:00