significantly. Upon investigation this was caused by name cache
misses for lookups of "..". For name cache entries for non-".."
directories, the cache entry serves double duty. It maps both the
named directory plus ".." for the parent of the directory. As such,
two ctime values (one for each of the directory and its parent) need
to be saved in the name cache entry.
This patch adds an entry for ctime of the parent directory to the
name cache. It also adds an additional uma zone for large entries
with this time value, in order to minimize memory wastage.
As well, it fixes a couple of cases where the mtime of the parent
directory was being saved instead of ctime for positive name cache
entries. With this patch, Lookup RPC counts return to values similar
to pre-r230394 kernels.
Reported by: bde
Discussed with: kib
Reviewed by: jhb
MFC after: 2 weeks
entries on one client when a directory was renamed on another client. The
root cause for the stale entry being trusted is that each per-vnode nfsnode
structure has a single 'n_ctime' timestamp used to validate positive name
cache entries. However, if there are multiple entries for a single vnode,
they all share a single timestamp. To fix this, extend the name cache
to allow filesystems to optionally store a timestamp value in each name
cache entry. The NFS clients now fetch the timestamp associated with
each name cache entry and use that to validate cache hits instead of the
timestamps previously stored in the nfsnode. Another part of the fix is
that the NFS clients now use timestamps from the post-op attributes of
RPCs when adding name cache entries rather than pulling the timestamps out
of the file's attribute cache. The latter is subject to races with other
lookups updating the attribute cache concurrently. Some more details:
- Add a variant of nfsm_postop_attr() to the old NFS client that can return
a vattr structure with a copy of the post-op attributes.
- Handle lookups of "." as a special case in the NFS clients since the name
cache does not store name cache entries for ".", so we cannot get a
useful timestamp. It didn't really make much sense to recheck the
attributes on the the directory to validate the namecache hit for "."
anyway.
- ABI compat shims for the name cache routines are present in this commit
so that it is safe to MFC.
MFC after: 2 weeks
The effect of this was, for clients mounted via inet6 addresses,
that the DRC cache would never have a hit in the server. It also
broke NFSv4 callbacks when an inet6 address was the only one available
in the client. This patch fixes the above, plus deletes opt_inet6.h
from a couple of files it is not needed for.
MFC after: 2 weeks
jhb@ spotted that nfscl_getstateid() might modify credentials when
called from nfsrpc_read() for the case where p != NULL, whereas
nfsrpc_read() only did a crdup() to get new credentials for p == NULL.
This bug was introduced by r195510, since pre-r195510 nfscl_getstateid()
only modified credentials for the p == NULL case. This patch modifies
nfsrpc_read()/nfsrpc_write() so that they do crdup() for the p != NULL case.
It is conceivable that this bug caused the crash reported by glebius@, but
that will not be determined for some time, since the crash occurred after
about 1month of operation.
Tested by: glebius
Reviewed by: jhb
MFC after: 2 weeks
client. This does not change the client's behaviour, but prepares
the code so that nfsrpc_rellockown() can be called elsewhere in a
future commit.
MFC after: 2 weeks
to the lock_owner4 string that goes on the wire. Also, add
code to do a ReleaseLockOwner Op on the lock_owner4 string
before a Close. Apparently not all NFSv4 servers handle multiple
instances of the same lock_owner4 string, at least not in a
compatible way. This patch avoids having multiple instances,
except for one unusual case, which will be fixed by a future commit.
Found at the recent NFSv4 interoperability Bakeathon.
Tested by: tdh at excfb.com
MFC after: 2 weeks
mode attribute in as 0 when doing writes. The change adds
the Mode attribute plus the others except Owner and Owner_group
to the list requested by the NFSv4 Write Operation. This fixed
a problem where an executable file built by "cc" would get mode
0111 instead of 0755 for some NFSv4 servers.
Found at the recent NFSv4 interoperability Bakeathon.
Tested by: tdh at excfb.com
MFC after: 2 weeks
"p_leader" for the "id" for POSIX byte range locking. I think
this would only have affected processes created by rfork(2)
with the RFTHREAD flag specified. This patch fixes that by
passing the "id" down through the various functions from
nfs_advlock().
MFC after: 2 weeks
argument for a write RPC when it succeeds for the first one and
fails for a subsequent RPC within the same call to the function.
This makes it compatible with the old NFS client for this case.
MFC after: 2 weeks
experimental NFS client to take care of overflows. Thanks
go to dillon at apollo.backplane.com for providing the
snippet of code that does this.
MFC after: 2 weeks
within the experimental NFS client. Mostly add mutex locking
and use the same rsize, wsize during the operation by keeping
a local copy of it. This is another change that brings it
closer to the regular NFS client.
MFC after: 2 weeks
adding the check to nfsrpc_close() isn't useful. Also,
the check in nfscl_getcl() must be more involved, since
it needs to check before and after the acquisition of
the refcnt on nfsc_lock, while the mutex that protects
the client state data is held.
functions, so that threads don't get stuck in them during
a forced dismount. nfs_sync/VFS_SYNC() needs this, since it is
called by dounmount() before VFS_UNMOUNT(). The nfscl_nget()
case makes sure that a thread doing an VOP_OPEN() or
VOP_ADVLOCK() call doesn't get blocked before attempting
the RPC. Attempting RPCs don't block, since they all
fail once a forced dismount is in progress.
The third one at the beginning of nfsrpc_close()
is done so threads don't get blocked while doing VOP_INACTIVE()
as the vnodes are cleared out.
With these three changes plus a change to the umount(1)
command so that it doesn't do "sync()" for the forced case
seem to make forced dismounts work for the experimental NFS
client.
MFC after: 2 weeks
to determine if a file system supports NFSv4 ACLs. Since
VOP_PATHCONF() must be called with a locked vnode, the function
is called before nfsvno_fillattr() and the result is passed in
as an extra argument.
MFC after: 2 weeks
crossing of server mount points properly. The functions
nfsvno_fillattr() and nfsv4_fillattr() were modified to
take the extra arguments that are the mount point, a flag
to indicate that it is a file system root and the mounted
on fileno. The mount point argument needs to be busy when
nfsvno_fillattr() is called, since the vp argument is not
locked.
Reviewed by: kib
MFC after: 2 weeks
bit fileid's in NFSv2 and NFSv3. Without this fix, invalid casting (and sign
extension) was creating problems for any fileid greater than 2^31.
We discovered this because we have test clusters with more than 2 billion
allocated files and 64-bit ino_t's (and friend structures).
Reviewed by: rmacklem
Approved by: zml (mentor)
MFC after: 2 weeks
directories for purposes of validating name cache entries. This
closes races where two updates to a file or directory within the same
second could result in stale entries in the name cache. While here,
remove the 'n_expiry' field as it is no longer used.
Reviewed by: rmacklem
MFC after: 1 week
predate the issue of a delegation are not cached once the delegation
is held. This is necessary, since cached attributes remain valid
while the delegation is held.
MFC after: 2 weeks
DIAGNOSTIC and #ifndef DIAGNOSTIC for debug assertions, prefer
KASSERT(). Also change one #ifdef DIAGNOSTIC in the new nfs server.
Submitted by: Mikolaj Golub <to.my.trociny gmail com>
MFC after: 2 weeks
during the grace period after startup. This grace period must
be at least the lease duration, which is typically 1-2 minutes.
It seems prudent for the experimental NFS client to wait a few
seconds before retrying such an RPC, so that the server isn't
flooded with non-recovery RPCs during recovery. This patch adds
an argument to nfs_catnap() to implement a 5 second delay
for this case.
MFC after: 1 week
with delegations enabled, the recovery could fail if the renew
thread is trying to return a delegation, since it will not do the
recovery. This patch fixes the above by having nfscl_recalldeleg()
fail with the I/O operations returning EIO, so that they will be
attempted later. Most of the patch consists of adding an argument
to various functions to indicate the delegation recall case where
this needs to be done.
MFC after: 1 week
for opens done locally in the client when a delegation for the file
was held. This could cause the client to crash in crsetgroups() when
recovering from a server crash/reboot. This patch fills in the
recovery credentials for this case, in order to avoid the client crash.
Also, add KASSERT()s to the credential copy functions, to catch any
other cases where the credentials aren't filled in correctly.
MFC after: 1 week
experimental NFSv4 client might try and use it as an IPv6 address,
breaking callbacks. The fix simply initializes the isinet6 variable
for this case.
Approved by: re (kensmith), kib (mentor)
optionally, created a separate list of NFSv4 opens to be closed, it
was possible for the associated OpenOwner to be free'd before the Open
was closed. The problem was that the Open was taken off the OpenOwner
list before the Close RPC was done and OpenOwners can be free'd once the
list is empty. This patch separates out the case of doing the Close RPC
into a separate function called nfscl_doclose() and simplifies nfsrpc_doclose()
so that it closes a single open instead of a list of them. This avoids
removing the Open from the OpenOwner list before doing the Close RPC.
Approved by: re (kensmith), kib (mentor)
the NFSv4 Close operations until ncl_inactive(). This is
necessary so that the Open StateIDs are available for doing
I/O on mmap'd files after VOP_CLOSE(). I also changed some
indentation for the nfscl_getclose() function.
Approved by: kib (mentor)
support for NFSv4 as well as NFSv2 and 3.
It lives in 3 subdirs under sys/fs:
nfs - functions that are common to the client and server
nfsclient - a mutation of sys/nfsclient that call generic functions
to do RPCs and handle state. As such, it retains the
buffer cache handling characteristics and vnode semantics that
are found in sys/nfsclient, for the most part.
nfsserver - the server. It includes a DRC designed specifically for
NFSv4, that is used instead of the generic DRC in sys/rpc.
The build glue will be checked in later, so at this point, it
consists of 3 new subdirs that should not affect kernel building.
Approved by: kib (mentor)
