the lost information in new comments.
Reported by: alc
Reviewed by: alc
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20632
I just happenned to have 3rd party code using 'var' as the output variable
which drew my attention to this. variables defined inside macros should be
prefixed to avoid getting shadowed varable wanrings from clang.
For busy ARC situation when arc_size close to arc_c is desired. But
then it is quite likely that aggsum_compare(&arc_size, arc_c) will need
to flush per-CPU buckets to find exact comparison result. Doing that
often in a hot path penalizes whole idea of aggsum usage there, since it
replaces few simple atomic additions with dozens of lock acquisitions.
Replacing aggsum_compare() with aggsum_upper_bound() in code increasing
arc_p when ARC is growing (arc_size < arc_c) according to PMC profiles
allows to save ~5% of CPU time in aggsum code during sequential write
to 12 ZVOLs with 16KB block size on large dual-socket system.
I suppose there some minor arc_p behavior change due to lower precision
of the new code, but I don't think it is a big deal, since it should
affect only very small window in time (aggsum buckets are flushed every
second) and in ARC size (buckets are limited to 10 average ARC blocks
per CPU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
It is too generous to collect in production debug traces that can only
be read with kernel debugger. Illumos includes special code in their
mdb debugger to read it, we don't.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
not performed directly by the pmap. Instead, they are performed by
vm_page_free_pages_toq(). (This is the same approach that we use on x86.)
Reviewed by: kib, markj
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D20627
iterate over consecutive vm_map entries, and that can easily just
'remember' the prev value instead of looking it up.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20628
Normally td_runtime is updated on context switch, but there are some kernel
threads that due to high absolute priority may run for many seconds without
context switches (yes, that is bad, but that is true), which means their
td_runtime was not updated all that time, that made them invisible for top
other then as some general CPU usage.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
for giving cred to a map entry backed by an object, and use them
instead of the code duplicated inline now.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20370
part of ciss_detach. It's a left-over debug that isn't needed and also
discloses a kernel address. Only root could provoke as part of a
devctl or kldunload.
Submitted by: Fuqian Huang
MFC After: 1 week
Memory copy is too heavy operation to do under the congested lock.
Moving it out reduces congestion by many times to almost invisible.
Since the original zio removed from the queue, and the child zio is
not executed yet, I don't see why would the copy need protection.
My guess it just remained like this from the time when lock was not
dropped here, which was added later to fix lock ordering issue.
Multi-threaded sequential write tests with both HDD and SSD pools
with ZVOL block sizes of 4KB, 16KB, 64KB and 128KB all show major
reduction of lock congestion, saving from 15% to 35% of CPU time
and increasing throughput from 10% to 40%.
Reviewed by: ahrens, behlendorf, ryao
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
demotion failure. Otherwise, some callers to pmap_demote_l2_locked(), such
as pmap_protect(), may leave an incorrect mapping in place on a demotion
failure.
Change pmap_demote_l2_locked() so that it handles addresses that are not
superpage aligned. Some callers to pmap_demote_l2_locked(), such as
pmap_protect(), may not pass a superpage aligned address.
Change pmap_enter_l2() so that it correctly calls vm_page_free_pages_toq().
The arm64 pmap is updating the count of wired pages when freeing page table
pages, so pmap_enter_l2() should pass false to vm_page_free_pages_toq().
Optimize TLB invalidation in pmap_remove_l2().
Reviewed by: kib, markj (an earlier version)
Discussed with: andrew
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20585
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
between each byte either sent or received). However, most transitions
actually complete in 2-3 microseconds.
By polling the status register with a delay of 4us with exponential
backoff, the performance of most IPMI operations is significantly
improved:
- A BMC update on a Supermicro x9 or x11 motherboard goes from ~1 hour
to ~6-8 minutes.
- An ipmitool sensor list time improves by a factor of 4.
Testing showed no significant improvements on a modern server by using
a lower delay.
The changes should also generally reduce the total amount of CPU or
I/O bandwidth used for a given IPMI operation.
Submitted by: Loic Prylli <lprylli@netflix.com>
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20527
necessary support functions in cpu-v6.h, and it may be that the only armv6
platform we support (RPi, the bcm2835 SOC) is incapable of supporting hwpmc.
Reported by: dim@
r348783 changed the behavior of the kernel mappings and broke booting on G5.
- Split the kernel mapping logic out so that the case where we are
running from the wrong memory space is handled using identity
mappings, and the case where we are not using a DMAP is handled by
forcibly mapping the kernel into the dmap range as intended by
r348783.
Reported by: Mikael Urankar
Reviewed by: luporl
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D20608
PR/203585 this appears to have been broken by r235959, which predates
the ipfilter 5.1.2 import into FreeBSD.
The IPv6 checksum calculation is incorrect. To resolve this we call
in6_cksum() to do the the heavy lifting for us, through a new function
ipf_pcksum6(). Should we need to revisit this area again, a DTrace probe
is added to aid with future debugging.
PR: 203275, 203585
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20583
assumed the pfil hook registration performed in ipf_modload() would take
care of this. However ipf_modload() is only called when the ipl kld is
loaded or when ipfilter is first called when it is statically linked
into the kernel at build time.
Prior to this, even though r302298 has been in the tree for a while, it
has never been used. So, r302298 in reality begins now.
PR: 212000
Reported by: ahsanb@
MFC after: 1 month
This fixes META_MODE rebuilding since it assumes that it this is
a non-consistent build command. These are always unencoded consistently
though and do not need to use the .OODATE/$? mechanism.
MFC after: 2 weeks
Reported by: npn
Sponsored by: DellEMC
This was lost in r335910 for some reason.
This also fixes a META_MODE rebuild issue in some modules [1].
MFC after: 2 weeks
Reported by: npn [1]
Sponsored by: DellEMC
New sysctl/tunables can now set the interval (in seconds) between
rate-limited crypto warnings. The new sysctls are:
- kern.cryptodev_warn_interval for /dev/crypto
- net.inet.ipsec.crypto_warn_interval for IPsec
- kern.kgssapi_warn_interval for KGSSAPI
Reviewed by: cem
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20555
length to the difference of the two offsets that define the gap, to
avoid overflow, rather that adding the length to an offset and
comparing that to another offset.
This addresses an overflow issue reported by Peter Holm on i386.
Reported by: pho
Tested by: pho
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20594
When building a kernel supporting PSERIES but not POWERNV,
the compiler would complain about an error variable being
possibly used before being initialized.
In practice, however, this should never happen. In any case, it
is now initialized to an error value.
Before this change, OFW initrd (as md) handling code was simulating an ofwbus
device. But as there isn't really a Device Tree (DT) node representing OFW
initrd (it is specified in 2 properties under /chosen), its driver was in fact
stealing other driver's DT node. This was noticed after MD_ROOT_MEM became
default and QEMU's USB keyboard stopped working under VNC.
This change consists in simplifying the process of detection and mapping of
initrd memory, turning it into a simple startup step, instead of trying to
simulate a device.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20553
AT_HWCAP is a field in the elf auxiliary vector meant to describe
cpu-specific hardware features. For RISC-V we want to use this to
indicate the presence of any standard extensions supported by the CPU.
This allows userland applications to query the system for supported
extensions using elf_aux_info(3).
Support for an extension is indicated by the presence of its
corresponding bit in AT_HWCAP -- e.g. systems supporting the 'c'
extension (compressed instructions) will have the second bit set.
Extensions advertised through AT_HWCAP are only those that are supported
by all harts in the system.
Reviewed by: jhb, markj
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20493
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.
MFC after: 2 weeks
This change rights that comparison.
Reported by: pho
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20595
detection pins to the Marvell Xenon SDHCI controller.
These features are enable by 'vqmmc-supply' and 'cd-gpios' properties in the
DTS.
This fixes the SD Card detection on espressobin.
Sponsored by: Rubicon Communications, LLC (Netgate)
children of every entry on the search path as part of updating values of
the max_free field. By comparing the max_free values of an entry and its
child on the search path, the code can avoid accessing the child off the
path in cases where the max_free value decreases along the path.
Specifically, this patch changes splay_split so that the max_free field
of every entry on the search path is replaced, temporarily, by the
max_free field from its child not on the search path or, if the child
in that direction is NULL, then a difference between start and end
values of two pointers already available in the split code, without
following any next or prev pointers. However, to find that max_free
value does not require looking toward that other child if either the
child on the search path has a lower max_free value, or the current max_free
value is zero, because in either case we know that the value of max_free for
the other child is the value we already have. So, the changes to
vm_entry_splay_split make sure that we know all the off-search-path entries
we will need to complete the splay, without looking at all of them. There is
an exception at the bottom of the search path where we cannot rely on the
max_free value in the direction of the NULL pointer that ends the search,
because of the behavior of entry-clipping code.
The corresponding change to vm_splay_entry_merge makes it simpler, since it's
just reversing pointers and updating running maxima.
In a test intended to exercise vigorously the vm_map implementation, the
effect of this change was to reduce the data cache miss rate by 10-14% and
the running time by 5-7%.
Tested by: pho
Reviewed by: alc
Approved by: kib (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19826
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.
The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).
Sponsored by: Rubicon Communications, LLC (Netgate)
for both the lower and upper bound modifications. Change the error returned
to ENOMEM. Rename the parameter size to len and make size a local variable
that stores the value of len after it has been modified.
This addresses concerns expressed by Bruce Evans after r348843.
Reported by: brde@optusnet.com.au
Reviewed by: kib, markj (mentors)
MFC after: 3 days
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20592
This allows SDIO (through CAM) to attach to an upstream, e.g.,
..
sdhci_bcm0 pnpinfo name=mmc@7e300000 compat=brcm,bcm2835-mmc
sdiob0
..
Without this, upon trying to load sdio, we would panic with
"bus_add_child is not implemented".
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
These algorithms are deprecated algorithms that will have no in-kernel
consumers in FreeBSD 13. Specifically, deprecate the following
algorithms:
- ARC4
- Blowfish
- CAST128
- DES
- 3DES
- MD5-HMAC
- Skipjack
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20554
All of these algorithms are explicitly marked SHOULD NOT in one of these
RFCs.
Specifically, RFC 6649 deprecates all algorithms using DES as well as
the "export-friendly" variant of RC4. RFC 8429 deprecates Triple DES
and the remaining RC4 algorithms.
Reviewed by: cem
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20343
While it is true that the new vmspace passed to vmspace_switch_aio
will always have a valid reference due to the AIO job or the extra
reference on the original vmspace in the worker thread, it is not true
that the old vmspace being switched away from will have more than one
reference.
Specifically, when a process with queued AIO jobs exits, the exit hook
in aio_proc_rundown will only ensure that all of the AIO jobs have
completed or been cancelled. However, the last AIO job might have
completed and woken up the exiting process before the worker thread
servicing that job has switched back to its original vmspace. In that
case, the process might finish exiting dropping its reference to the
vmspace before the worker thread resulting in the worker thread
dropping the last reference.
Reported by: np
Reviewed by: alc, markj, np, imp
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20542
Enable synaptics and elantech touchpads, as well as IBM/Lenovo TrackPoints
by default, instead of having users find and toggle a loader tunable.
This makes things like two finger scroll and other modern features work out
of the box with X. By enabling these settings by default, we get a better
desktop experience in X, since xserver and evdev can make use of the more
advanced synaptics and elantech features.
Reviewed by: imp, wulf, 0mp
Approved by: imp
Sponsored by: B3 Init (zeising)
Differential Revision: https://reviews.freebsd.org/D20507
misunderstanding that the function does not work additive
when repeatedly called for diffferent bands.
Reviewed by: avos (a few months ago)
MFC after: 2 weeks
When an HMI occurs a message event also gets created with the details of the
exception. Hook into the messaging framework to retrieve the HMI message.
Nothing is done with it yet, except to panic on unhandled exception.
vmem_xalloc() cannot be called while holding a nonblocking mutex, warned
by WITNESS. The lock may not be necessary in general, but it avoids
superfluous concurrent OPAL calls for the same sensor.
Reported by: pkubaj
32-bit machine, a len parameter just a few bytes short of 4G, rounded
up to a page boundary and hitting zero then, is not okay. Return
failure in that case.
Reported by: pho
Reviewed by: alc, kib (mentor)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D20580
The mcall_trap() dummy function is unused, and should be removed as we
are unlikely to support M-mode traps any time soon.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20494
Some of the config options that are disabled by default seem to be only
for historical reasons. Enable those that appear to no longer be
problematic. This includes WITH_CTF, STACK, GEOM_RAID, and re-enabling
blacklisted kernel modules.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20495
Most architectures print their total (real) and available memory during
boot. Properly initialize the realmem global and print these messages.
Also print the physical memory chunks (behind a bootverbose flag).
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20496
Add the enter and exit events, similar to what's found in
hammer_time() on amd64. We must use TSRAW as the pcpu isn't yet
initialized.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20497
The gp register is intended to used by the linker as another means of
performing relaxations, and should point to the small data section (.sdata).
Currently gp is being used as the pcpu pointer within the kernel, but the more
appropriate choice for this is the tp register, which is unused.
Swap existing usage of gp with tp within the kernel, and set up gp properly
at boot with the value of __global_pointer$ for all harts.
Additionally, remove some cases of accessing tp from the PCB, as it is not
part of the per-thread state. The user's tp and gp should be tracked only
through the trapframe.
Reviewed by: markj, jhb
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19893
previously addressed in r348246.
This pmap problem also exists on arm64 and riscv. However, the original
solution developed for amd64 and i386 cannot be used on arm64 and riscv. In
particular, arm64 and riscv do not define a PG_PROMOTED flag in their level
2 PTEs. (A PG_PROMOTED flag makes no sense on arm64, where unlike x86 or
riscv we are required to break the old 4KB mappings before making the 2MB
mapping; and on riscv there are no unused bits in the PTE to define a
PG_PROMOTED flag.)
This commit implements an alternative solution that can be used on all four
architectures. Moreover, this solution has two other advantages. First, on
older AMD processors that required the Erratum 383 workaround, it is less
costly. Specifically, it avoids unnecessary calls to pmap_fill_ptp() on a
superpage demotion. Second, it enables the elimination of some calls to
pagezero() in pmap_kernel_remove_{l2,pde}().
In addition, remove a related stale comment from pmap_enter_{l2,pde}().
Reviewed by: kib, markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20538
Add strict checks for unused bit states in Elantech trackpoint packet
parser to filter out spurious events produces by some hardware which
are detected as trackpoint packets. See comment on r328191 for example.
Tested by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
Sign bits for X and Y motion data were taken from wrong places.
PR: 238291
Reported by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
Tested by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
MFC after: 2 weeks
Spell all bits in the hex constants.
Since all lines are modified, consistently use <tab> after #define.
Reviewed by: alc (previous version), dougm
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D20560
that it becomes increasingly expensive to process a steady stream of
correctable errors. Additionally, the memory used by the MCA entries can
grow without bound.
Change the code to maintain two separate lists: a list of entries which
still need to be logged, and a list of entries which have already been
logged. Additionally, allow a user-configurable limit on the number of
entries which will be saved after they are logged. (The limit defaults
to -1 [unlimited], which is the current behavior.)
Reviewed by: imp, jhb
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20482
Apply a linker script when linking i386 kernel modules to apply padding
to a set_pcpu or set_vnet section. The padding value is kind-of random
and is used to catch modules not compiled with the linker-script, so
possibly still having problems leading to kernel panics.
This is needed as the code generated on certain architectures for
non-simple-types, e.g., an array can generate an absolute relocation
on the edge (just outside) the section and thus will not be properly
relocated. Adding the padding to the end of the section will ensure
that even absolute relocations of complex types will be inside the
section, if they are the last object in there and hence relocation will
work properly and avoid panics such as observed with carp.ko or ipsec.ko.
There is a rather lengthy discussion of various options to apply in
the mentioned PRs and their depends/blocks, and the review.
There seems no best solution working across multiple toolchains and
multiple version of them, so I took the liberty of taking one,
as currently our users (and our CI system) are hitting this on
just i386 and we need some solution. I wish we would have a proper
fix rather than another "hack".
Also backout r340009 which manually, temporarily fixed CARP before 12.0-R
"by chance" after a lead-up of various other link-elf.c and related fixes.
PR: 230857,238012
With suggestions from: arichardson (originally last year)
Tested by: lwhsu
Event: Waterloo Hackathon 2019
Reported by: lwhsu, olivier
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D17512
Add a CAM-Newbus SDIO support module. This works provides a newbus
infrastructure for device drivers wanting to use SDIO. On the lower end
while it is connected by newbus to SDHCI, it talks CAM using the MMCCAM
framework to get to it.
This also duplicates the usbdevs framework to equally create sdiodev
header files with #defines for "vendors" and "products".
Submitted by: kibab (initial work, see https://reviews.freebsd.org/D12467)
Reviewed by: kibab, imp (comments on earlier version)
MFC after: 6 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19749
In the DMA case, given we disable the data interrupts, we never seem
to get DATA_END. Given we are relying on DMA interrupts we are not
using the SDHCI state machine and hence only call into
sdhci_platform_will_handle() for the first check of data.
We do not call "will handle" for any following round trips of the same
transaction if block size * count > BCM_DMA_BLOCK_SIZE.
Manually check "left" in the DMA interrupt handler to see if we have at
least another full BCM_DMA_BLOCK_SIZE to handle.
Without this change we would DMA that and then even start a DMA with
left == 0 which would lead to a timeout and error.
Now we re-enable data interrupts and return and let the SDHCI generic
interrupt handler and state machine pick the SPACE_AVAIL up and then
find that it should punt to the pio_handler for the remaining bytes
or finish the data transaction.
With this change block mode seems to work beyond 7 * 64byte blocks,
which worked as it was below BCM_DMA_BLOCK_SIZE.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20199
Extending what the initial revision, r273264, r276985, r277346 have
started for the transfer mode and command registers, another pair of
16bit registers written in sequence are block size and block count,
which fall together onto the same 32bit line and hence the same
register(s) would be written twice in sequence for those as well.
Use a similar approach to transfer mode and command and save the writes
to either of the block regiters and then only execute a write once.
We can do this as with transfer mode their values are meaningless until
a command is issued so we can use that write to command as a trigger
to also write out the block registers.
Compared to transfer mode and command the value of block count can
change, so we need to keep state and actually read the block registers
back the first time after a write.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20197
Currently slot_printf() uses two printf() calls to print the
device-slot name, and actual message. When other printf()s are
ongoing in parallel this can lead to interleaved message on the console,
which is especially unhelpful for debugging or error messages.
Take a hit on the stack and vsnprintf() the message to the buffer.
This way it can be printed along with the device-slot name in one go
avoiding console gibberish.
Reviewed by: marius
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19747
Add cam_sim_alloc_dev() as a wrapper to cam_sim_alloc() which takes
a device_t instead of the unit_number (which we can derive from the
dev again).
Add device_t sim_dev to struct cam_sim. It will be used to pass through
the bus for cases when both sides of CAM speak newbus already and we want
to link them (yet make the calls through CAM for now).
SDIO will be the first consumer of this. For that make use of
cam_sim_alloc_dev() in sdhci under MMCCAM.
This will also allow people to start iterating more on the idea
to newbus-ify CAM without changing 50+ device drivers from the start.
Also to be clear there are callers to cam_sim_alloc() which do not
have a device_t (e.g., XPT) or provide their own unit number so we cannot
simply switch the KPI entirely.
Submitted by: kibab (original idea, see https://reviews.freebsd.org/D12467)
Reviewed by: imp, chuck
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19746
Convert the array to use C99 initializers.
Make it constant.
Replace MAX_TRAP_MSG with nitems().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When ARC size is very small, aggsum_lower_bound(&arc_size) may return
negative values, that due to unsigned comparison caused delays, waiting
for arc_adjust() to "fix" it by calling aggsum_value(&arc_size). Use
of signed comparison there fixes the problem.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While formally it is not necessary, but the sooner it start, the sooner it
finish, and supposedly less disturbing for workload it will be.
MFC after: 2 weeks
Differentiate between PCI Express Endpoint devices and Root Complex
Integrated Endpoints in the nda driver. The Link Status and Capability
registers are not valid for Integrated Endpoints and should not be
displayed. The bhyve emulated NVMe device will advertise as being an
Integrated Endpoint.
Reviewed by: imp
Approved byL imp (mentor)
Differential Revision: https://reviews.freebsd.org/D20282
These calls are not the same in general: the former will dequeue the
page if it is enqueued, while the latter will just leave it alone. But,
all existing uses of the former apply to unmanaged pages, which are
never enqueued in the first place. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20470
This set of changes make it possible to run FreeBSD for PowerPC64/pseries,
under QEMU/KVM, without requiring the host to make hugepages available to the
guest.
While there was already this possibility, by means of setting hw_direct_map to
0, on PowerPC64 there were a couple of issues/wrong assumptions that prevented
this from working, before this changelist.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20522
- Add constants for OpenBSD wxneeded, bootdata and randomize to the
FreeBSD elf_common.h file. This is the file that gets used by the
elftoolchain library.
- Update readelf and elfdump utilities to decode these program headers
if they are encountered.
Note: FreeBSD has it's own version of elfdump(1), which will be updated
in a subsequent commit. I am adding it here anyway because this diff is
going to be submitted upstream.
Discussed with: emaste
Reviewed by: imp
MFC afer: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20548
M contrib/elftoolchain/elfdump/elfdump.c
M contrib/elftoolchain/readelf/readelf.c
M sys/sys/elf_common.h
Before r305323 (MFV r302991: 6950 ARC should cache compressed data)
arc_read() code did this for access to a ghost buffer:
arc_adapt() (from arc_get_data_buf())
arc_access(hdr, hash_lock)
I.e., we first checked access to the MFU ghost/MRU ghost buffer and
adapt MFU/MRU sizes (in arc_adapt()) and next move buffer from the ghost
state to regular.
After r305323 the sequence is different:
arc_access(hdr, hash_lock);
arc_hdr_alloc_pabd(hdr);
I.e., we first move the buffer from the ghost state in arc_access() and
then we check access to buffer in ghost state (in arc_hdr_alloc_pabd()
-> arc_get_data_abd() -> arc_get_data_impl() -> arc_adapt()). This is
incorrect: arc_adapt() never see access to the ghost buffer because
arc_access() already migrated the buffer from the ghost state to
regular.
So, the fix is to restore a call to arc_adapt() before arc_access() and
to suppress the call to arc_adapt() after arc_access().
Submitted by: Slawa Olhovchenkov <slw@zxy.spb.ru>
MFC after: 2 weeks
Sponsored by: Integros [integros.com]
Differential Revision: https://reviews.freebsd.org/D19094
ZFS ABD allocates tons of 4KB chunks via UMA, requiring huge hash tables.
With initial hash table size of only 32 elements it takes ~20 expansions
or ~400 seconds to adapt to handling 220GB ZFS ARC. During that time not
only the hash table is highly inefficient, but also each of those expan-
sions takes significant time with the lock held, blocking operation.
On my test system with 256GB of RAM and ZFS pool of 28 HDDs this change
reduces time needed to first time read 240GB from ~300-400s, during which
system is quite busy and unresponsive, to only ~150s with light CPU load
and just 5 sub-second CPU spikes to expand the hash table.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This fixes a panic in Espressobin when gpioregulator fails to allocate the
GPIO pin (the GPIO controller is not there).
Sponsored by: Rubicon Communications, LLC (Netgate)
Provide the acpi handle path as the location string for the nvdimm
children of the nvdimm_root device.
Reviewed by: kib
Approved by: jhb (mentor)
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D20528
vm_reserv_break in r348484, and there was found to improve performance
minutely and reduce code size. This change applies a similar change to
vm_reserv_reclaim_config, expecting similar benefits. This change also
allows quick rejection of page ranges that are unsuitable on account
of alignment or boundary issues, where those issues are processed a
page at a time in the current implementation. For contrived test
cases, this can make finding a reservation satisfying a major
alignment requirement around 30 times faster.
Tested by: pho
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D20274
