Previously we relied on the .s.o rule in share/mk/bsd.suffixes.mk to
tell make that linux_support.o is built from linux_support.s, even
though we do not use the .s.o rule to assemble it.
Reviewed by: sjg
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35864
The fasttrap pid provider has been in place for a long time, but stopped
getting built by efe88d92da in preparation for 64-bit atomics. 32-bit
emulation of 64-bit atomics was added in 9aafc7c05.
MFC after: 3 weeks
MODULES_OVERRIDE has traditionally taken precedence over EXTRA_MODULES
and WITHOUT_MODULES as the exact list of modules to build. Over time,
things have been added that has broken this. Move the .endif that makes
this the case to the right place. The so called 'ALL_MODULES' option is
the only thing with higher precedence, but it's not quite all the
options anymore (though it is much more of them, and doesn't quite
work on !x86).
Sponsored by: Netflix
The previous commit added references to to the syscallnames arrays, but
failed to add the relevant source files to the module build. Thus, the
modules failed to load due to missing symbols.
Reported by: cy
Fixes: 1da65dcb1c ("linux: populate sv_syscallnames in each sysentvec")
Sponsored by: The FreeBSD Foundation
Sort the entries alphabetically, and list them with one entry per line.
This makes the diffs much cleaner when adding or removing a new entry,
as I will do in the next commit.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This commit brings back the driver from FreeBSD commit
f187d6dfbf plus subsequent fixes from
upstream.
Relative to upstream this commit includes a few other small fixes such
as additional INET and INET6 #ifdef's, #include cleanups, and updates
for recent API changes in main.
Reviewed by: pauamma, gbe, kevans, emaste
Obtained from: git@git.zx2c4.com:wireguard-freebsd @ 3cc22b2
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36909
Now that armv[45] are removed, simplify some tests for armv[67] that are
now either always true, or always true when we're on arm.
Sponsored by: Netflix
Ah, the joys of pushing a commit with a dirty editor buffer that all the
checks in git didn't catch... Also, my eyeballs missed it too :(.
Fixes: ba9f71ddec
Noticed by: jrtc27
Sponsored by: Netflix
When building a kernel without FDT these modules don't build. As they
depend on FDT and don't work with ACPI disable them.
Reviewed by: imp, kevans
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37178
This is the last part for ARM64 Hyper-V enablement. This includes
commone files and make file changes to enable the ARM64 FreeBSD
guest on Hyper-V. With this patch, it should be able to build
the ARM64 image and install it on Hyper-V.
Reviewed by: emaste, andrew, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36744
2782ed8f6c fixed the standalone module
build. REmove the now duplicate includes for opt_acpi.h and
opt_platform.h. Als remove the if_mdio.h again in both the Makefile
and the implementation file as it is not (currently) used.
X-MFC with: ba7319e909
MFC after: 70 days
Now that we properly define INTRNG generically on all the platforms that
need it in opt_global.h, we don't need to define it here.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D37110
New driver to ACPI generic event device, defined in ACPI spec.
Some ACPI power button may not work without this.
In qemu arm64 with "virt" machine, with ACPI firmware,
enable devd check devd message by
and invoke following command in qemu monitor
(qemu) system_powerdown
and make sure some power button input event appear.
(setting sysctl hw.acpi.power_button_state=S5 is not work,
because ACPI tree does not have \_S5 object.)
Reviewed by: andrew, hrs
Differential Revision: https://reviews.freebsd.org/D37032
Import two files left out initially from the driver needed for debugfs
support [1]. Adjust the driver further to make it compile on FreeBSD.
This is currently turned off and needs more LinuxKPI/lindebugfs work.
Being in the tree will allow us to collaboratively work on it and
then we can enable it for good.
Obtained from: Linux wireless-testing (tag: wt-2022-10-19) [1]
2c9078b9abcb884e27360340aaa7dfd4c0de29b3
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.
The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.
Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:
acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX
dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.
The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.
Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638
This is a new DTrace provider which allows arbitrary kernel instructions
to be traced. Currently it is implemented only for amd64.
kinst probes are created on demand by libdtrace, and there is a probe
for each kernel instruction. Probes are named
kinst:<module>:<function>:<offset>, where "offset" is the offset of the
target instruction relative to the beginning of the function. Omitting
"offset" causes all instructions in the function to be traced.
kinst works similarly to FBT in that it places a breakpoint on the
target instruction and hooks into the kernel breakpoint handler.
Because kinst has to be able to trace arbitrary instructions, it does
not emulate most of them in software but rather causes the traced thread
to execute a copy of the instruction before returning to the original
code.
The provider is quite low-level and as-is will be useful mostly only to
kernel developers. However, it provides a great deal of visibility into
kernel code execution and could be used as a building block for
higher-level tooling which can in some sense translate between C sources
and generated machine code. In particular, the "regs" variable recently
added to D allows the CPU's register file to be accessed from kinst
probes.
kinst is experimental and should not be used on production systems for
now.
In collaboration with: markj
Sponsored by: Google, Inc. (GSoC 2022)
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36851
Add the glue code to support netlink in Linuxolator.
linux_common(4) now depends on netlink(4).
All netlink protocol constants are consistent with the Linux version.
However, certain OS-specific constants such as AF_INET6, interface
flags or default routing table id, are different between FreeBSD and
Linux. Thus, it may be needed to rewrite some message parts or even
rewrite the whole message, adding or removing some TLVs. The core
netlink implementation code provides efficient rewriting callbacks
which Linuxolator now uses.
Reviewed by: dchagin
Differential Revision: https://reviews.freebsd.org/D36361
MFC after: 2 months
Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firewall, fibs, vnets, etc are controlled via netlink.
It is async, TLV-based protocol, providing 1-1 and 1-many communications.
The current implementation supports the subset of NETLINK_ROUTE
family. To be more specific, the following is supported:
* Dumps:
- routes
- nexthops / nexthop groups
- interfaces
- interface addresses
- neighbors (arp/ndp)
* Notifications:
- interface arrival/departure
- interface address arrival/departure
- route addition/deletion
* Modifications:
- adding/deleting routes
- adding/deleting nexthops/nexthops groups
- adding/deleting neghbors
- adding/deleting interfaces (basic support only)
* Rtsock interaction
- route events are bridged both ways
The implementation also supports the NETLINK_GENERIC family framework.
Implementation notes:
Netlink is implemented via loadable/unloadable kernel module,
not touching many kernel parts.
Each netlink socket uses dedicated taskqueue to support async operations
that can sleep, such as interface creation. All message processing is
performed within these taskqueues.
Compatibility:
Most of the Netlink data models specified above maps to FreeBSD concepts
nicely. Unmodified ip(8) binary correctly works with
interfaces, addresses, routes, nexthops and nexthop groups. Some
software such as net/bird require header-only modifications to compile
and work with FreeBSD netlink.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36002
MFC after: 2 months
Use the correct option to suppress warnings due to discarding const
from pointers on GCC vs clang.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D36780
While for in-kernel we already have LINUXKPI_INCLUDES in kern.pre.mk
for kmod builds we've not had a common define to use leading to various
spellings of include paths.
In order for the include list to be expanded more easily in the future,
e.g., adding the "dummy" includes (for all) and to harmonize code,
duplicate LINUXKPI_INCLUDES to kmod.mk and use it for all module Makefiles.
MFC after: 1 week
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D36683
Notable upstream pull request merges:
#13725 Fix BLAKE3 tuneable and module loading on Linux and FreeBSD
#13756 FreeBSD: Organize sysctls
#13773 FreeBSD: add kqfilter support for zvol cdev
#13781 Importing from cachefile can trip assertion
#13794 Apply arc_shrink_shift to ARC above arc_c_min
#13798 Improve too large physical ashift handling
#13799 Revert "Avoid panic with recordsize > 128k, raw sending and
no large_blocks"
#13802 Add zfs.sync.snapshot_rename
#13831 zfs_enter rework
#13855 zfs recv hangs if max recordsize is less than received
recordsize
Obtained from: OpenZFS
OpenZFS commit: c629f0bf62
This diff extends LinuxKPI to support simple attribute files in debugfs.
These simple attributes are an essential component for compiling drm-kmod
with CONFIG_DEBUG_FS enabled.
This will allow for easier graphics driver debugging using
Intel's igt-gpu-tools.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D35883
Sponsored by: Google, Inc. (GSoC 2022)
This merges TCA6416, TCA6408 drivers and adds PCA9555 support.
They handle 8 pin and 16 pin ICs with basic INPUT/OUTPUT functionality.
The register map is fairly similar so there is no point in having two
separate drivers.
Reviewed by: kd
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36559
As all ISA sound card drivers have been removed sndbuf_dma no longer
serves any purpose.
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
Import the most recent versions of the firmware images for the
rtw89 driver.
This is based on linux-firmware at 2f2f0181581d3e35bfdb9fc65f609ee9d3fbaeb7.
The license of the firmware matches the previously added rtw88(4) firmware
and you can find a copy in sys/contrib/dev/rtw89fw/LICENCE.rtlwifi_firmware.txt.
Add build infrastructure to create the .ko files but do not yet hook
it up to the build until all parts are in the tree.
Approved by: core.11 (imp) [2022-03-27]
MFC after: 6 weeks
Import rtw89 based on wireless-testing at (tag: wt-2022-09-02)
78667a29c116c6b186a37e28cd8dd7fa9923aee8 with adjustments for FreeBSD.
For the moment this will stay disconnected from the build until the
last bits are flushed out, but this will help people with a card to
do testing and possibly help improving.
Given the lack of full license texts on non-local files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core.11 (imp) [1] [2022-03-27]
MFC after: 6 weeks
Although originally socket was intended to use with ipfw(4) only, now
it also can be used with pf(4). On a kernel without packet filters,
it still can be used to inject traffic.
CWARNFLAGS must be added to after including kern.mk, otherwise all the
warnings set in kern.mk are ignored. This is why the
-Wmissing-prototypes warnings were not seen previously.
While here, drop -Wno-pointer-sign as it is doesn't seem to be needed,
but add -Wno-cast-qual to silence warnings for various casts of const
pointers to non-const pointers.
Reviewed by: MichalX.Gulbicki_intel.com, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36332
Notable upstream pull request merges:
#13717 Fix zpool status in case of unloaded keys
#13753 Prevent zevent list from consuming all of kernel memory
#13767 arcstat: fix -p option
#13785 Updates for snapshots_changed property
Obtained from: OpenZFS
OpenZFS commit: a582d52993
Changes since 1.26.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.17.0.0 for Linux" dated
2022-07-29.
Fixes
-----
BASE:
- Enabled all MA parity interrupt bits.
- Use config file value to override number of rx channel. nrxch=1 was not
handled in the firmware.
- Replaced read only registers with new registers EDC_H_BIST_USER_WDATA0,
EDC_H_BIST_USER_WDATA1 and EDC_H_BIST_CMD_LEN to dump the uP memory parity
error status registers.
- 10G simplex module support enabled.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
Notable upstream pull request merges:
#9372 Implement a new type of zfs receive: corrective receive (-c)
#13635 Add snapshots_changed as property
#13636 Add support for per dataset zil stats and use wmsum counters
#13643 Fix scrub resume from newly created hole
#13670 Fix memory allocation for the checksum benchmark
#13695 Skip checksum benchmarks on systems with slow cpu
#13711 zpool: fix redundancy check after vdev removal
Obtained from: OpenZFS
OpenZFS commit: b3d0568cfd
TARGET_ARCH is always wrong when not used at the toplevel Makefile*, or
in something that has to be included from there. Switch to using
MACHINE_ARCH exclusively here since there's no benefit from assigning
TARGET_ARCH the value of MACHINE_ARCH and then using TARGET_ARCH (and
make TARGET_ARCH=xxx won't work).
Sponsored by: Netflix
Update iwlwifi 22000 firmware to -73 and rebuilds for 9000/9260.
Update the driver to accept the newer version.
Firmware was obtained from linux-firmware at
150864a4d73e8c448eb1e2c68e65f07635fe1a66.
Sponsored by: The FreeBSD Foundation
MFC after: 23 days
QAT in-tree driver ported from out-of-tree release available
from 01.org.
The driver exposes complete cryptography and data compression
API in the kernel and integrates with Open Crypto Framework.
Details of supported operations, devices and usage can be found
in man and on 01.org.
Patch co-authored by: Krzysztof Zdziarski <krzysztofx.zdziarski@intel.com>
Patch co-authored by: Michal Jaraczewski <michalx.jaraczewski@intel.com>
Patch co-authored by: Michal Gulbicki <michalx.gulbicki@intel.com>
Patch co-authored by: Julian Grajkowski <julianx.grajkowski@intel.com>
Patch co-authored by: Piotr Kasierski <piotrx.kasierski@intel.com>
Patch co-authored by: Adam Czupryna <adamx.czupryna@intel.com>
Patch co-authored by: Konrad Zelazny <konradx.zelazny@intel.com>
Patch co-authored by: Katarzyna Rucinska <katarzynax.kargol@intel.com>
Patch co-authored by: Lukasz Kolodzinski <lukaszx.kolodzinski@intel.com>
Patch co-authored by: Zbigniew Jedlinski <zbigniewx.jedlinski@intel.com>
Reviewed by: markj, jhb (OCF integration)
Reviewed by: debdrup, pauamma (docs)
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34632
A replacement QAT driver will be imported, but this replacement does not
support Atom C2xxx hardware. So, the existing driver will be kept
around to provide opencrypto offload support for those chipsets.
Reviewed by: pauamma, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35817
With clang 15, the following -Werror warning is produced:
sys/contrib/openzfs/module/zfs/zfs_fm.c:256:6: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
int cnt = 0;
^
The 'cnt' variable does not seem to be used for anything, but since this
is contributed code, suppress the warning instead.
MFC after: 3 days
Clang 15 is more strict about function definitions not matching
declarations, and zlib has a lot of these, but since it is contributed
code (and in K&R style to boot), suppress those warnings instead.
MFC after: 3 days
Generally, access to the kernel debugger is considered to be unsafe from
a security perspective since it presents an unrestricted interface to
inspect or modify the system state, including sensitive data such as
signing keys.
However, having some access to debugger functionality on production
systems may be useful in determining the cause of a panic or hang.
Therefore, it is desirable to have an optional policy which allows
limited use of ddb(4) while disabling the functionality which could
reveal system secrets.
This loadable MAC module allows for the use of some ddb(4) commands
while preventing the execution of others. The commands have been broadly
grouped into three categories:
- Those which are 'safe' and will not emit sensitive data (e.g. trace).
Generally, these commands are deterministic and don't accept
arguments.
- Those which are definitively unsafe (e.g. examine <addr>, search
<addr> <value>)
- Commands which may be safe to execute depending on the arguments
provided (e.g. show thread <addr>).
Safe commands have been flagged as such with the DB_CMD_MEMSAFE flag.
Commands requiring extra validation can provide a function to do so.
For example, 'show thread <addr>' can be used as long as addr can be
checked against the system's list of process structures.
The policy also prevents debugger backends other than ddb(4) from
executing, for example gdb(4).
Reviewed by: markj, pauamma_gundo.com (manpages)
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35371
When ice is built as a module, it can't be loaded due to unresolved
symbol. Ensuring in Makefile that the ice_rdma.c is built fixes the
problem.
Signed-off-by: Bartosz Sobczak <bartosz.sobczak@intel.com>
Signed-off-by: Eric Joyner <erj@freebsd.org>
Reviewed by: erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D35687
Add an option to enable/disable DTrace without disabling ZFS. New
architectures such as CHERI may support ZFS before they support DTrace
and the old model of WITHOUT_CDDL disabling both wasn't helpful.
For compatiblity, the CDDL option remains and WITHOUT_CDDL implies
WITHOUT_DTRACE. WITHOUT_DTRACE also implies WITHOUT_CTF.
As part of this change, largely convert cddl/*/Makefile to using the
more compact SUBDIR.${MK_<FOO>}+= form rather than using intermediate
variables.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D35718
After some discussion, for now, simply revert the change to split
the driver up into if_rtw88_core.ko and if_rtw88_pci.ko as we do
not have an if_rtw88.ko anymore. We do have code trying to
auto-load modules, e.g. ifconfig, based on if_xxx.ko.
We could, based on Makefile magic or further code, generate a
if_rtw88.ko module with proper dependencies and keep this but for
simplicity stay with the one slightly larger module for now.
Should code appear to do this "properly" we can revisit this once
USB support has landed.
Slightly update the module Makefile to keep the separation of files
between core and pci bits visible and maintainable for the future.
This reverts commit 0f7b9777f8.
OpenVPN Data Channel Offload (DCO) moves OpenVPN data plane processing
(i.e. tunneling and cryptography) into the kernel, rather than using tap
devices.
This avoids significant copying and context switching overhead between
kernel and user space and improves OpenVPN throughput.
In my test setup throughput improved from around 660Mbit/s to around
2Gbit/s.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34340
Add support of ARM CMN-600 controller, PMU access functions only.
Add support of PMU counters of ARM CMN-600 controller.
Reviewed by: mhorne
Sponsored By: ARM
Differential Revision: https://reviews.freebsd.org/D32321
Remove -mgeneral-regs-only when building the arm64 blake3 code. It
uses simd instructions so will use non-general purpose registers.
Sponsored by: The FreeBSD Foundation
Along with the snd_sb8 and snd_sb16 drivers. They supported ISA
Creative Sound Blaster and compatible sound cards.
Note that isa/sb.h is not removed, as it is still used by some PCI
sound card drivers.
ISA sound card drivers are deprecated as discussed on the current[1] and
stable[2] mailing lists. Deprecation notices were added in e39ec8933b
and MFCd to stable branches.
Driver removals are being committed individually so that specific
drivers can be restored if necessary (either in FreeBSD or by downstream
projects).
[1] https://lists.freebsd.org/archives/freebsd-current/2022-March/001680.html
[2] https://lists.freebsd.org/archives/freebsd-stable/2022-March/000585.html
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
They are not loadable otherwise.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35369
Split the driver up into two modules (if_rtw88_pci.ko and rtw88_core.ko).
This is in preparation for the hopefully eventually upcoming USB support
using the same driver core.
Note: this changes the module name to load to if_rtw88_pci.ko instead of
if_rtw88.ko. If using devmatch(8) everything should stay the same as
the driver name (used for net.wlan.devices) stays rtw88. If using
kld_list in rc.conf or loader.conf you will need to adjust the name.
Update man page for this.
MFC after: 3 days
Notable upstream pull request merges:
#12321 Fix inflated quiesce time caused by lwb_tx during zil_commit()
#13244 zstd early abort
#13360 Verify BPs as part of spa_load_verify_cb()
#13452 More speculative prefetcher improvements
#13466 Expose zpool guids through kstats
#13476 Refactor Log Size Limit
#13484 FreeBSD: libspl: Add locking around statfs globals
#13498 Cancel in-progress rebuilds when we finish removal
#13499 zed: Take no action on scrub/resilver checksum errors
#13513 Remove wrong assertion in log spacemap
Obtained from: OpenZFS
OpenZFS commit: b9d98453f9
This module depends on the presence of both INET and INET6 options in
order to compile.
Reviewed by: erj
Fixes: cdcd52d41e ("irdma: Add RDMA driver for Intel(R) Ethernet...")
Differential Revision: https://reviews.freebsd.org/D35343
This is an initial commit for RDMA FreeBSD driver for Intel(R) Ethernet
Controller E810, called irdma. Supporting both RoCEv2 and iWARP
protocols in per-PF manner, RoCEv2 being the default.
Testing has been done using krping tool, perftest, ucmatose, rping,
ud_pingpong, rc_pingpong and others.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: #manpages (pauamma_gundo.com) [documentation]
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34690
This allows the "irdma" driver to communicate with the ice(4)
driver to allow it access to the underlying device's hardware
resources as well as synchronize access to shared resources.
This interface already existed in the standalone out-of-tree
1.34.2 driver; this commit adds and enables it in the in-kernel
driver.
Note:
Adds hack to module Makefile to compile interface/.m files
These are required for the RDMA client interface, but they don't
build as-is like the normal .c files. The source directory doesn't
seem to be included by default, so add lines that specifically
add them as libraries so that ice_rdma.h can be found and the
interface files will compile.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30889
Notable upstream pull request merges:
#10662 zvol_wait: Ignore locked zvols
#12789 Improve log spacemap load time
#12812 Improved zpool status output, list all affected datasets
#13277 FreeBSD: Use NDFREE_PNBUF if available
#13302 Make zfs_max_recordsize default to 16M
#13311 Fix error handling in FreeBSD's get/putpages VOPs
#13345 FreeBSD: Fix translation from ABD to physical pages
#13373 zfs: holds: dequadratify
#13375 Corrected edge case in uncompressed ARC->L2ARC handling
#13388 Improve mg_aliquot math
#13405 Reduce dbuf_find() lock contention
#13406 FreeBSD: use zero_region instead of allocating a dedicated page
Obtained from: OpenZFS
OpenZFS commit: c0cf6ed679
Update to the latest iwlwifi firmware based on
linux-firmware at b19cbdca78ab2adfd210c91be15a22568e8b8cae
(tag: 20220509)
and update firmware module Makefiles accordingly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import code update from iwlwifi-next
at e89600ebeeb14d18c0b062837a84196f72542830.
This amongst other things removes the deprecated BCAST_FILTERING option,
which we had disabled before due to firmware issues.
Also prepares us for the next firmware update.
The "enable_ini" module option has become an integer with a
sysctl proc equivalent handler. Disable the module parameter changing
for the moment until we'll have working LinuxKPI support or implement
it as SYSCTL_PROC in FreeBSD directly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
To avoid annoyng messages from glibc-2.35 test suite add the simple
implementation of rseq syscall which is do nothing for now.
I plan to implement it if and when the API stabilizes.
MFC after: 2 weeks
Firmware version 9.9.11 added support for hw_scan and is reportedly
causing more problems than 9.9.10 does. Until we get a chance to
test this out downgrade the firmware in order to help people testing
more.
Sponsored by: The FreeBSD Foundation
PR: 248235
MFC after: 2 days
X-MFC: just to get the reminder with the original commit
X-MFC with: 73d4ebea35
FSE_createCTable raises the warning because we stub out malloc() to
NULL in the kernel, so the passed in size is unused.
ZSTD_seqDecompressedSize has a variable whose value is only used in
assertions.
NB: These files are missing corresponding entries in sys/conf/files.