Commit Graph

191 Commits

Author SHA1 Message Date
Sam Leffler
10b6de5e58 correct diag request to fetch isr state on fatal interrupts
MFC after:	1 week
2006-10-09 23:45:26 +00:00
Sam Leffler
3fe92528af o move ath hal os glue code from the hal to the driver: this code was
part of the hal distribution early on when the hal was built for
  each os but it's been portable for a long time so move the os-specific
  code out (and off the vendor branch)
o correct the copyright on ah_osdep.?; it was mistakenly given a
  restricted license and not a dual-bsd/gpl license
o remove the module api definition as it was never used
o fixup include paths for move of ah_osdep.h

MFC after:	2 weeks
2006-09-18 16:49:15 +00:00
Sam Leffler
5901d2d38a Add support for newer parts that do not require separate keycache
entries for tx+rx mic keys.  This requires a newer hal, but works
fine with the current hal in cvs.

MFC after:	2 weeks
2006-09-18 16:26:19 +00:00
Sam Leffler
a7ee023101 remove stub radar support; it's never been used and future
hal's will not include the calls (due to redesign)

MFC after:	1 week
2006-09-18 16:16:02 +00:00
Warner Losh
1a3c917f9d while (0); -> while (0) in multi-line macros 2006-08-17 22:50:33 +00:00
Sam Leffler
6bf62dd1de o add noise floor to stats
o include current tx rate in stats so athstats gets a consistent
  snapshot and doesn't have to make an extra ioctl
o record tx rate for raw frames

MFC after:	3 weeks
2006-08-10 16:31:37 +00:00
Sam Leffler
05680ab622 check return value of ath_tx_dmasetup
Noticed by:	yongari
2006-08-08 16:42:01 +00:00
Sam Leffler
664443d053 raw 802.11 packet transmit support
Joint work with:	Andrea Bittau <a.bittau@cs.ucl.ac.uk>
2006-08-05 05:07:17 +00:00
Sam Leffler
d95eaaf3ed add missing \n's
Submitted by:	avatar@
MFC after:	1 week
2006-07-26 04:09:04 +00:00
Sam Leffler
f3af83f7cf check tim is present in the beacon before defer'ing the mcast buffer bit;
insures we don't do this when operating in adhoc mode

Submitted by:	avatar@
MFC after:	1 week
2006-07-26 03:48:41 +00:00
Sam Leffler
6f48c95642 enable rx of control frames when in monitor mode
Submitted by:	Andrea Bittau <a.bittau@cs.ucl.ac.uk>
MFC after:	1 week
2006-06-26 04:31:36 +00:00
Sam Leffler
622b3fd21c Close race in handling mcast traffic when operating as an ap with
stations in power save: add a new q where mcast frames are stashed
and on beacon update (at DTIM) move frames from the mcast q to the
cabq and start it.  This ensures the cabq is only manipulated in
one place.

Sponsored by:	Hobnob
MFC after:	2 weeks
2006-06-26 03:10:45 +00:00
Sam Leffler
30db812aa9 new stats
MFC after:	1 month
2006-06-23 18:48:08 +00:00
Sam Leffler
465c8d6787 bandaid type coercion for ia64
Submitted by:	marcel
2006-06-07 20:37:14 +00:00
Sam Leffler
f9fc583f17 move hal bus+tag externalization to the bus glue code where it belongs;
this is a noop on all current freebsd architectures

MFC after:	1 month
2006-06-05 17:51:20 +00:00
Sam Leffler
ff046a6c6b add missed calls to bpf_peers_present 2006-06-02 23:14:40 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
Sam Leffler
6ccb8ea780 quiet tindexbox complaints about passing BUS_SPACE_MAXADDR as
a bus_size_t to bus_dma_tag_create; when PAE is enabled this
does not work

Cluebat by:	scottl
MFC after:	2 weeks
2006-05-08 20:11:09 +00:00
Sam Leffler
34e2d6230c force type coercion for bus tag+handle when calling ath_hal_attach
to ensure we match the type signature; we cannot assume HAL_BUS_TAG
and HAL_BUS_HANDLE correspond to bus_space_tag_t and bus_space_handle_t
(should probably do this for HAL_SOFTC too but leave that for now)

MFC after:	1 month
2006-05-06 23:23:39 +00:00
Sam Leffler
1b409765cf correct type
MFC after:	2 weeks
2006-05-05 03:21:13 +00:00
Sam Leffler
ae2734b68c intercept public safety channels and do explicit mapping of freq->ieee
channel number since we're not ready at the net80211 layer to deal with them;
note this mapping has to match what's done in ieee80211_mhz2ieee

MFC after:	3 days
2006-04-26 16:02:36 +00:00
Sam Leffler
df4d04af01 honor fixed tx antenna when sending beacon frames
Submitted by:	Michael Stevens (from netbsd)
MFC after:	1 week
2006-04-25 22:52:28 +00:00
Sam Leffler
4a3ac3fc61 Improve ath_draintxq debug info: dump the packet as well
as the descriptor and handle the beacon q like other q's

MFC after:	1 month
2006-04-16 18:24:27 +00:00
Sam Leffler
2af90c547b Unbreak cabq handling: check the s/w q, not the h/w q as the frames
have not been passed to the h/w yet.  This remedies watchdog timeout
of buffered multicast frames in hostap mode.

While here eliminate an extraneous check; ieee80211_beacon_update sets
the tim bit based on ncabq != 0 so there's no reason to check it too.

Noticed by:	Christophe Prevotaux
2006-04-16 18:14:01 +00:00
Sam Leffler
a585a9a1bc o add opt_ath.h enable tweaking various config parameters for the driver
without modifying the source code
o default debug msgs and diag support to off

MFC after:	3 days
2006-04-03 18:14:02 +00:00
Sam Leffler
d0d425bf53 correct ni_txrate when using a fixed rate; fixes current rate reporting
MFC after:	3 days
2006-03-09 00:28:44 +00:00
Sam Leffler
ebecf80294 backout 1.136 until we can resolve report that it causes output to stall 2006-02-27 17:20:23 +00:00
Sam Leffler
8fe92b6cf6 fix a race whereby a tx descriptor might get reused before the hardware
is finished with it; this may only occur when the tx queue is setup as
dba-gated but since the fix is cheap apply it to all queues

while here make the queue depth signed for use in assertions

Reviewed by:	apatti
MFC after:	2 weeks
2006-02-24 23:10:08 +00:00
Sam Leffler
1d89d44f74 drop softc lock around copyin/copyout
MFC after:	2 weeks
2006-02-15 18:36:52 +00:00
Sam Leffler
d2f6ed153d fix build w/o AR_DEBUG
MFC after:	2 weeks
2006-02-15 18:35:09 +00:00
Sam Leffler
7a4c5ed92c improve tx/rx buf printing routines
MFC after:	2 weeks
2006-02-15 18:31:04 +00:00
Sam Leffler
9760f8aeb9 add missing bit from 1.130 2006-02-15 18:24:22 +00:00
Sam Leffler
16c8acaab5 o handle fatal errors directly instead of via the task queue
o temporarily dump some h/w state for diagnosis; this will be
  removed once some issues are resolved

MFC after:	2 weeks
2006-02-15 18:23:03 +00:00
Sam Leffler
e2815d6951 use ath_hal_gettxintrtxqs so we only process h/w tx
queues that have an interrupt pending

MFC after:	2 weeks
2006-02-15 18:17:53 +00:00
Sam Leffler
c66c48cba2 fixup comments 2006-02-15 18:15:49 +00:00
Sam Leffler
1539af1ef5 close race between ath_tx_start and ath_tx_processq
Reviewed by:	apatti
MFC after:	1 week
2006-02-15 18:12:24 +00:00
Sam Leffler
aaba14d7b2 fix comment and whitespace 2006-02-13 18:40:53 +00:00
Sam Leffler
fdb05e3c89 fix merge botch (duplicate processing of cabq for old cards) 2006-02-13 18:23:32 +00:00
Sam Leffler
bd5a9920c2 Update for rev 0.9.16.16 hal:
o add dfs+radar hooks; DFS is presently disabled in the hal
o channel and mode handling changes
o various api changes
o be more aggressive about iq calibration settling so ap mode
  operation is better immediately after startup
o rfkill/rfsilent sysctl support
o tpc ack/cts sysctl support

MFC after:	2 weeks
2006-02-10 19:07:08 +00:00
Sam Leffler
e35a02a97d pad for future statistics
MFC after:	2 weeks
2006-02-09 22:37:33 +00:00
Sam Leffler
f9748b9d0d Minor tx path cleanups:
o assume all data frames have been classified so there's no need
  to check if QoS is being used, just fetch the wme priority from
  the mbuf
o fix double counting of noack frames
o fix nearby comment

MFC after:	2 weeks
2006-02-09 22:34:34 +00:00
Sam Leffler
b2792ff681 correct handling of mbuf allocation failure when replenishing the rx list
(leave a printf for the moment, need to make a debug msg)

Obtained from:	atheros
MFC after:	2 weeks
2006-02-09 22:29:23 +00:00
Sam Leffler
80d939bfba Beacon timer setup fixes:
o pull nexttbtt forward in adhoc mode too
o resync beacon timers on joining a bss or ibss as the tstamp we
  collected while scanning is almost certainly out of date

Note we may need to refine the ibss mode check in ath_recv_mgmt.

Reviewed by:	avatar, dyoung
Obtained from:	atheros
MFC after:	2 weeks
2006-02-09 22:21:53 +00:00
Sam Leffler
2c27b2f635 only start the cab queue if there are frames to send
MFC after:	2 weeks
2006-02-09 22:14:11 +00:00
Sam Leffler
370572d951 debug fixups: reduce noise msgs, report channel flags on reset failure,
mark data+link fields in descriptor dumps

MFC after:	2 weeks
2006-02-09 22:12:28 +00:00
Sam Leffler
d7736e139e Phantom beacon miss workaround: track the tsf of the last received
frame and if we get a beacon miss interrupt ignore it if we've received
a frame within the beacon miss interval.  This should never trigger
and the handling at the net80211 layer should likewise deal with this
but it doesn't hurt and can suppress extranous probe request frames.
Note that we can legtimately get a bmiss when under heavy load.

MFC after:	2 weeks
2006-02-09 22:03:26 +00:00
Sam Leffler
0bbf544158 use a private task queue thread
MFC after:	2 weeks
2006-02-09 21:48:51 +00:00
Sam Leffler
7a04dc27c1 add adhoc demo mode support
MFC after:	2 weeks
2006-02-09 21:42:53 +00:00
Sam Leffler
17f3f177e4 make regdomain sysctl r/w in case it's possible to do this in the future
MFC after:	2 weeks
2006-02-09 21:36:00 +00:00
Sam Leffler
6c4612b94d cleanup rate setup
MFC after:	2 weeks
2006-02-09 21:31:48 +00:00