terminal state for kernel console output.
r56043 in 2000 added many complications to support dynamic selection
of the terminal emulator using modules and the ioctl CONS_SETTERM.
This was never completed. There are still no modules, but it is easy
to restore the scterm and dumb emulators at compile time. Then
boot-time configuration for the preferred one doesn't work right, but
CONS_SETTERM almost works after fixing this bug. CONS_SETTERM only
switches the emulator for the user state, leaving the kernel state(s)
still using the boot-time emulator. The fix is especially important
when switching from sc to scteken, since the scteken state has pointers
in it.
Rename kernel_console_ts to sc_kts.
The previous update to the driver to 3.2.12-k changed the VF's API version
to 1.2, but did not let the VF fall back to 1.1 or 1.0 versions. So, this
patch tries 1.2 first, then the older versions in succession if that fails.
This should allow the VF driver to negotiate 1.1 and work with older PF
drivers, such as the one used in Amazon's EC2 service.
PR: 220872
Submitted by: Jeb Cramer <jeb.j.cramer@intel.com>
MFC after: 1 week
Sponsored by: Intel Corporation
extreme outliers from dodgy drives. Adjust comments to reflect this,
and make sure that the number of latency buckets match in the two
places where it matters.
o Allow I/O scheduler to gather times on 32-bit systems. We do this by shifting
the sbintime_t over by 8 bits and truncating to 32-bits. This gives us 8.24
time. This is sufficient both in range (256 seconds is about 128x what current
users need) and precision (60ns easily meets the 1ms smallest bucket size
measurements). 64-bit systems are unchanged. Centralize all the time math so
it's easy to tweak tha range / precision tradeoffs in the future.
o While I'm here, the I/O scheduler should be using periph_data rather than
sim_data since it is operating on behalf of the periph.
Differential Review: https://reviews.freebsd.org/D12119
via soisdisconnected(), and in the earlier unlock earlier to avoid lock
recursion.
This fixes a situation when a socket on accept queue is reset before being
accepted.
Reported by: Jason Eggleston <jeggleston llnw.com>
A follow-up to r322836.
Warnings for the unused declaration were breaking some second tier
architectures, but did not show up in Clang on x86.
Reported by: markj (ddb.4), emaste (declaration)
Sponsored by: Dell EMC Isilon
When debugging a deadlock, it is useful to follow the full chain of locks as
far as possible.
Reviewed by: jhb
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12115
Not enabling FSGSBASE in %cr4 does not prevent reporting of the
feature by the CPUID instruction (blame Int*l). As result, kernels
which were run under monitors pretended that usermode cannot modify
TLS base without the syscall, while libc noted right combination of
capable CPU and the new kernel version, trying to use the WRFSBASE
instruction.
Really old hypervisors that cannot handle enablement of these features
in %cr4 would require the manual configuration, by setting the loader
tunable hw.cpu_stdext_disable=0x81
Reported by: lwhsu, mjoras
Sponsored by: The FreeBSD Foundation
MFC after: 18 days
The check for timestamps are too early to handle SYN-ACK correctly.
So move it down after the corresponing processing has been done.
PR: 216832
Obtained from: antonfb@hesiod.org
MFC after: 1 week
Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of
PCI express network cards.
There is currently no user-space support and this driver only supports
kernel side non-routable RoCE V1. The krping kernel module can be used
to test this driver. Full user-space support including RoCE V2 will be
added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise
this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel
module will only be built when WITH_OFED=YES is specified.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
newvers.sh looks for a .vcs subdirectory (e.g. .git, .svn) to determine
which vcs info tool to run (e.g., git rev-parse, svn info).
(As of r308789 if a .vcs subdirectory is not found at ${TOPDIR} then
newvers.sh walks up successive parent directories, testing for the .vcs
subdirectory at each step. This is done in case the FreeBSD source is
built in a subdirectory as part of some larger project, but either way
newvers.sh still tests for the .vcs subdirectory.)
However, when using git worktree there is no .git subdirectory but
rather a plain text .git file which contains a reference to the main
working tree.
Change findvcs() to test that the .vcs entry exists, regardless of type.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Rather than repeatedly nesting loops, separate concerns with a single loop
per call stack level. Use a table to drive the recursive routine. Handle
missing topology layers more gracefully (infer a single unit).
Analyze some additional optional layers which may be present on e.g. AMD Zen
systems (groups, aka dies, per package; and cachegroups, aka CCXes, per
group).
Display that additional information in the boot-time topology information,
when it is relevent (non-one).
Reviewed by: markj@, mjoras@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12019
sysctls to display stats, stats polled every 2 seconds
Modify QLA_LOCK()/QLA_UNLOCK() to not sleep after acquiring mtx_lock
Add support to turn OFF/ON error recovery following heartbeat failure for
debug purposes.
Set default max values to 32 Tx/Rx/SDS rings
MFC after:5 days
The full system memory barrier around a TLB invalidation is stricter than
required. It needs to wait on accesses to main memory, with just the weaker
store variant before the invalidate. As such use the dsb istst, tlbi, dlb
ish sequence already used in pmap.
The tlbi instruction in this sequence is also unnecessarily using a
broadcast invalidate when it just needs to invalidate the local CPUs TLB.
Switch to a non-broadcast variant of this instruction.
Sponsored by: DARPA, AFRL
Right now, we enable the CR4.FSGSBASE bit on CPUs which support the
facility (Ivy and later), to allow usermode to read fs and gs bases
without syscalls. This bit also controls the write access to bases
from userspace, but WRFSBASE and WRGSBASE instructions currently
cannot be used, because return path from both exceptions or interrupts
overrides bases with the values from pcb.
Supporting the instructions is useful because this means that usermode
can implement green-threads completely in userspace without issuing
syscalls to change all of the machine context.
Support is implemented by saving the fs base and user gs base when
PCB_FULL_IRET flag is set. The flag is set on the context switch,
which potentially causes clobber of the bases due to activation of
another context, and when explicit modification of the user context by
a syscall or exception handler is performed. In particular, the patch
moves setting of the flag before syscalls change context.
The changes to doreti_exit and PUSH_FRAME to clear PCB_FULL_IRET on
entry from userspace can be considered a bug fixes on its own.
Reviewed by: jhb (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D12023
softdep_count_dependencies().
Buffer's b_dep list is protected by the SU mount lock. Owning the
buffer lock is not enough to guarantee the stability of the list.
Calculation of the UFS mount owning the workitems from the buffer must
be much more careful to not dereference the work item which might be
freed meantime. To get to ump, use the pointers chain which does not
involve workitems at all.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When a security policy should match TCP connection with specific ports,
the SYN+ACK segment send by syncache_respond() is considered as forwarded
packet, because at this moment TCP connection does not have PCB structure,
and ip_output() is called without inpcb pointer. In this case SPIDX filled
for SP lookup will not contain TCP ports and security policy will not
be found. This can lead to unencrypted SYN+ACK on the wire.
This patch restores the old behavior, when ports will not be filled only
for forwarded packets.
Reported by: Dewayne Geraghty <dewayne.geraghty at heuristicsystems.com.au>
MFC after: 1 week
Deadlock condition:
The return value of TDQ_LOCKPTR(td) is the same for two threads.
1) The first thread signals a wakeup while keeping the rcu_read_lock().
This invokes sched_add() which in turn will try to lock TDQ_LOCK().
2) The second thread is calling synchronize_rcu() calling mi_switch() over
and over again trying to yield(). This prevents the first thread from running
and releasing the RCU reader lock.
Solution:
Release the thread lock while yielding to allow other threads to acquire the
lock pointed to by TDQ_LOCKPTR(td).
Found by: KrishnamRaju ErapaRaju <Krishna2@chelsio.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Currently several paths in the NFS client upgrade the shared vnode
lock to exclusive, which might cause temporal dropping of the lock.
This action appears to be fatal for nullfs mounts over NFS. If the
operation is performed over nullfs vnode, then bypassed down to NFS
VOP, and the lock is dropped, other thread might reclaim the upper
nullfs vnode. Since on reclaim the nullfs vnode lock and NFS vnode
lock are split, the original lock state of the nullfs vnode is not
restored. As result, VFS operations receive not locked vnode after a
VOP call.
Stop upgrading the vnode lock when we check the consistency or flush
buffers as result of detected inconsistency. Instead, allocate a new
lockmgr lock for each NFS node, which is locked exclusive instead of
the vnode lock upgrade. In other words, the other parallel
modification of the vnode are excluded by either vnode lock conflict
or exclusivity of the new lock when the vnode lock is shared.
Also revert r316529 because now the vnode cannot be reclaimed during
ncl_vinvalbuf().
In collaboration with: pho
Reviewed by: rmacklem
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12083
This mode allows other clean buffers to arrive while we flush the buf
lists for the vnode, which is fine for the targeted use. We only need
that all buffers existed at the time of the function start were
flushed. In fact, only one assert has to be relaxed.
In collaboration with: pho
Reviewed by: rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12083
- Use more relevant name 'signo' instead of 'i' for the local variable
which contains a signal number to send for the current exception.
- Eliminate two labels 'userout' and 'out' which point to the very end
of the trap() function. Instead use return directly.
- Re-indent the prot_fault_translation block by reducing if() nesting.
- Some more monor style changes.
Requested and reviewed by: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This information is normally available via acpi_perf, but in case it is not,
add support for fetching the information via MSRs on AMD family 17h (Zen)
processors. Zen uses a slightly different formula than previous generation
AMD CPUs.
This was inspired by, but does not fix, PR 221621.
Reported by: Sean P. R. <seanpr AT swbell.net>
Reviewed by: mjoras@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12082
There was already a per-vty defaults field, but it was useless since it was
only initialized when propagating the global settings and thus no different
from the current global settings and not per-vty. The global defaults field
was also invariant after boot time, but not quite so useless.
Fix this by adding a second selection bit the the control flags of the
relevant ioctl(). vidcontrol doesn't support this yet. Setting either
default propagates the change to the current setting for the same level
and then to all lower levels.
Improve the 3-way escape sequence used by termcap to control the cursor.
The "normal" (ve) case has always used reset, so the user could set
it to anything, but since the reset is to a global value this is not
very useful, especially since the "very visible" (vs) case doesn't
reset but inconsistently forces to a blinking block. Change vs to
first reset and then XOR the blinking bit so that it is predictably
different from ve.
