Commit Graph

196 Commits

Author SHA1 Message Date
Brooks Davis
214bfc9759 Attach if_vlan to the build process. 2001-09-05 23:47:46 +00:00
Takeshi Shibagaki
daee21d1b4 Make the fe driver kernel object module to compile in default.
Reviewed by: imp
2001-09-02 06:43:45 +00:00
Mike Smith
3ca509eaca Build the ACPI module by default. 2001-08-30 00:55:22 +00:00
Bill Fenner
fffcbbcd94 Unbreak ip_mroute_mod 2001-07-25 20:15:17 +00:00
Matt Jacob
d567d6183a Move netgraph to i386 only. Which is where it works only. 2001-07-25 00:20:33 +00:00
Bill Paul
362c5c1e02 You were knocked senseless by the Boomerang, spun around by the Cyclone,
blown over by the Hurricane and had a house dropped on you by the Tornado.
Now it's time to have your parade rained on by... the Typhoon!

This commit adds driver support for 3Com 3cR990 10/100 ethernet
adapters based on the Typhoon I and Typhoon II chipsets. This is actually
a port of the OpenBSD driver with many hacks by me.

No Virginia, there isn't any support for the hardware crypto yet. However
there is support for TCP/IP checksum offload and VLANs.

Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for
squeezing enough info out of 3Com to get this written, and for doing
most of the hard work.

Manual page is included. Compiled as a module and included in GENERIC.
2001-07-23 20:44:54 +00:00
Brooks Davis
09261c4f2f Put module directories one per line so adding new modules creates readable
diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
Julian Elischer
8ff09ab3a9 turn on the null-modem device.
(I've been using it with vmware for over a year now.)
2001-07-08 04:17:26 +00:00
Brooks Davis
53dab5fe7b gif(4) and stf(4) modernization:
- Remove gif dependencies from stf.
 - Make gif and stf into modules
 - Make gif cloneable.

PR:		kern/27983
Reviewed by:	ru, ume
Obtained from:	NetBSD
MFC after:	1 week
2001-07-02 21:02:09 +00:00
Joerg Wunsch
e219897a2a First stab at fixing resource deallocation, and implementing fdc(4) as
a KLD.  Still doesn't work well except in the PCMCIA case (now if only
pccardd(8) could load and unload drivers dynamically...).  Mainly, it
tries to find fdc0 on the PCI bus for whatever obscure reasons, but i
need someone who understands driver(9) to fix this.  However, it's at least
already better than before, and i'm tired of maintaining too many private
changes in my tree, given the large patches bde submitted. :)

Idea of a KLD triggered by:	Michael Reifenberger <root@nihil.plaut.de>
2001-06-29 07:36:29 +00:00
Dima Dorfman
dc9ffb125c Remove dgm module.
Forgotten by:	brian
2001-06-28 06:41:23 +00:00
Joerg Wunsch
c45b4c1e58 Implement a loadable module for the oltr Olicom Token Ring driver. I
could only get a chance of testing it under 4.3, but together with the
if_oltr.c fixes at least it seems to work now.  If someone has the chance
to test this under -current, please do.

Unfortunaltey, the TR code itself (if_iso88025subr.c) is not written
in a way that would allow to make a seaparate KLD out of it.  By now,
just link it directly into the oltr KLD since it's probably the POLA
to be able to load the TR code together with the only TR hardware
driver we've got by now.

I've got one single unexplained panic (in doreti_switch or somewhere
there, calling a 0xc1XXXXXX address that did no longer belong to the
kernel at all) after unloading the modules once, thus i don't propose
a MFC of this module despite my testing has been done solely on 4.3,
unless someone is really going to test this stuff in -current.
2001-06-14 15:16:04 +00:00
Dag-Erling Smørgrav
1d6286d833 Disconnect linprocfs prior to moving it. 2001-06-10 23:20:38 +00:00
Dag-Erling Smørgrav
373c5169ca Connect the fs directory to the build. 2001-06-10 19:16:18 +00:00
Bill Paul
c678bc4f13 Add device driver support for the Level 1 LXT1001 NetCellerator
gigabit ethernet controller chip. This device is used on some
fiber optic gigE cards from SMC, D-Link and Addtron. Jumbograms and
TCP/IP checksum offload on receive are supported. Hardware VLAN
filtering is not, because it doesn't play well with our existing
VLAN code. Also add manual page.

There is a 4.x version of this driver available at
http://www.freebsd.org/~wpaul/Level1/4.x if anyone feels adventurous
and wants to test it. I still need to do performance testing and
tuning with this device.

(For my next trick, I will make the 3Com 3cR990 sit up and beg.)
2001-05-31 21:44:26 +00:00
Doug Barton
3259d3fb9e Don't ask to build something that doesn't exist anymore. 2001-05-30 06:24:47 +00:00
Ruslan Ermilov
1166fb516b - sys/msdosfs moved to sys/fs/msdosfs
- msdos.ko renamed to msdosfs.ko
- /usr/include/msdosfs moved to /usr/include/fs/msdosfs
2001-05-25 08:14:14 +00:00
Dima Dorfman
636b9e70d2 Build snp(4) as a module. 2001-05-23 23:33:08 +00:00
Ruslan Ermilov
99d300a1ec - FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file
systems were repo-copied from sys/miscfs to sys/fs.

- Renamed the following file systems and their modules:
  fdesc -> fdescfs, portal -> portalfs, union -> unionfs.

- Renamed corresponding kernel options:
  FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.

- Install header files for the above file systems.

- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
  Makefiles.
2001-05-23 09:42:29 +00:00
Bill Paul
ce4946daa5 Add support for gigabit ethernet cards based on the NatSemi DP83820
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.

This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.

This driver should also work on the alpha. It's not turned on in
GENERIC.
2001-05-11 19:56:39 +00:00
Brian Somers
ad01e0c856 Add a ``digi'' driver.
This driver supports PCI Xr-based and ISA Xem Digiboard cards.
dgm will go away soon if there are no problems reported.  For now,
configuring dgm into your kernel warns that you should be using
digi.  This driver is probably close to supporting Xi, Xe and Xeve
cards, but I wouldn't expect them to work properly (hardware
donations welcome).

The digi_* pseudo-drivers are not drivers themselves but contain
the BIOS and FEP/OS binaries for various digiboard cards and are
auto-loaded and auto-unloaded by the digi driver at initialisation
time.  They *may* be configured into the kernel, but waste a lot
of space if they are.  They're intended to be left as modules.

The digictl program is (mainly) used to re-initialise cards that
have external port modules attached such as the PC/Xem.
2001-05-02 01:08:09 +00:00
Sheldon Hearn
4721e8a849 Revert previous delta, which was completely bogus.
The perceived problem was the symptom of a local error.
2001-04-24 12:30:49 +00:00
Sheldon Hearn
da82ff05af Disconnect linux from the build. The buildkernel target has been
breaking on linux for more than two days because sys_exit_args
referenced in linux_sysent.c does not exist.
2001-04-24 08:56:42 +00:00
Brian Somers
fa9a4c8a8d dgm now builds as a module 2001-04-14 15:36:45 +00:00
Boris Popov
e59572b595 Add smbfs module. Currently it includes smbfs, netsmb and DES parts.
Kernel should be compiled with options LIBMCHAIN and LIBICONV.
2001-04-13 12:11:19 +00:00
Warner Losh
581a68a232 Add support for MODULES_OVERRIDE. This is a list of modules to build
instead of all of them.  You can put this in /etc/make.conf or in
makeoptions.

Reviewed by: arch@

# docs to follow.
2001-04-02 08:52:05 +00:00
Poul-Henning Kamp
a3e862d902 Remove vn(4) driver. 2001-03-09 20:10:35 +00:00
Boris Popov
d8589bd5cb Introduce API for sequential reads/writes (build/dissect) of mbuf chains.
Reviewed by:	Ian Dowse <iedowse@maths.tcd.ie>,
		Bosko Milekic <bmilekic@technokratis.com>,
		Julian Elischer <julian@elischer.org> and arch@/net@
Obtained from:	smbfs
2001-02-24 15:44:30 +00:00
Jonathan Lemon
da33b5e745 Hook up the linux module for alpha again.
Approved by:	beast
2001-02-20 02:19:01 +00:00
Matt Jacob
28b2e25674 Move linux to i386 only until it gets fixed for alpha (again). 2001-02-19 21:20:33 +00:00
Dag-Erling Smørgrav
fa20d78387 KLDify the "speaker" device (which calls itself atspeaker internally, and
is i386-specific, so name the module atspeaker rather than speaker).
2001-02-01 16:39:34 +00:00
John Hay
01b96fdf9e Make klds for the ar and sr devices and hook them up.
The normal versions are called if_ar.ko and if_sr.ko and the netgraph
versions ng_sync_ar.ko and ng_sync_sr.ko.
2001-01-30 10:20:43 +00:00
Brian Feldman
7dd1f91a70 Evidently, svr4 is broken at the moment. Disconnect the build to prevent
Bad Things from unsuspecting module loaders.
2001-01-09 04:56:53 +00:00
Nicolas Souchu
c05aa33cb0 Add the VESA S3 linear framebuffer driver. It works on top of VESA by replacing
the video switch by another. Exactly as VESA does on top of VGA.

It adds linear framebuffer to S3 VESA 1.2 cards.

Obtained from:	The original S3 ISA code comes from
                Peter Horton <pdh@colonel-panic.com>
2001-01-05 16:53:10 +00:00
John Hay
121a47e264 Make sppp a kld. 2001-01-03 08:12:30 +00:00
Dag-Erling Smørgrav
dd488b6dd8 Retire kernfs (kernel part). 2000-12-28 12:17:35 +00:00
David E. O'Brien
45c27b729e *sigh* The `pecoff' module was added to all arches w/out testing a compile
on all arches.  This fixes the Alpha kernel build.
2000-12-22 22:33:15 +00:00
Takanori Watanabe
6ef9f30dfd Add pecoff directory.
Submitted by:nyan
2000-12-21 15:33:30 +00:00
Alexander Langer
a4563d080a Enable the sym module. 2000-12-19 12:54:17 +00:00
Paul Richards
5d2dea723c Enable building of lnc module. 2000-12-16 01:48:06 +00:00
Bill Paul
b1df743d8a Whups: only build the if_el module on the x86 platform for now, until
I can confirm it works on the alpha.
2000-12-15 20:14:19 +00:00
Bill Paul
1b49710482 Newbus the if_el (3Com 3c501) driver. Use bus_space_X() functions.
Add detach routine and turn driver into a module so it can be loaded
and unloaded. Also take a stab at implementing multicast packet
reception so that this NIC will work with IPv6. Promiscuous mode
doesn't seem to work, but I'm not sure why. It works well enough that
I can run dhclient on it and put it on the office network though.
Also ripped out spl stuff and replaced it with mutexes.
2000-12-15 20:09:10 +00:00
Dag-Erling Smørgrav
026527e5b8 Reconnect linprocfs. 2000-12-13 20:29:30 +00:00
Warner Losh
641d2fddd3 Add aic and ray modules. I've been building these for a while now on
i386.
2000-12-13 05:54:26 +00:00
Dag-Erling Smørgrav
2b3d269b8b Temporarily disconnect linprocfs from the build, until I fix it so it builds
with Kirk's big proc patch.
2000-12-12 16:03:17 +00:00
Alfred Perlstein
07b219e204 Revert disconnect of sysvipc now that there's a makefile available 2000-12-01 21:13:06 +00:00
Dag-Erling Smørgrav
b8b5f4629f Disconnect sysvipc, since it doesn't build. 2000-12-01 12:26:39 +00:00
Alfred Perlstein
78525ce318 sysvipc loadable.
new syscall entry lkmressys - "reserved loadable syscall"

Make syscall_register allow overwriting of such entries (lkmressys).
2000-12-01 08:57:47 +00:00
Bill Paul
7d1fae05bb The vortex driver can be compiled as a KLD now. The EISA attachment
is only built on the i386 platform for now, since it depends on symbols
which I'm pretty sure won't be present in the alpha build.
2000-11-07 01:03:23 +00:00
David E. O'Brien
e84f2add04 Now have the `linux' module on the Alpha too. 2000-11-04 07:31:46 +00:00