Commit Graph

295 Commits

Author SHA1 Message Date
Sam Leffler
a5d62f191b replace if_watchdog w/ a private callout
MFC after:	1 month
2006-12-11 00:41:22 +00:00
Sam Leffler
fe8184b687 drop softc lock when passing rx frames up the stack
MFC after:	1 month
2006-12-11 00:37:12 +00:00
Sam Leffler
f8f1546232 split wi_start int locked+unlocked variants and use the unlocked
one from the isr to eliminate a recursive lock

MFC after:	1 month
2006-12-11 00:35:51 +00:00
Sam Leffler
df64e1e4ef nuke compatibility cruft
MFC after:	1 month
2006-12-11 00:32:15 +00:00
Robert Watson
acd3428b7d Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges.  These may
require some future tweaking.

Sponsored by:           nCircle Network Security, Inc.
Obtained from:          TrustedBSD Project
Discussed on:           arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
                        Alex Lyashkov <umka at sevcity dot net>,
                        Skip Ford <skip dot ford at verizon dot net>,
                        Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
Sam Leffler
330608ccb6 raw 802.11 packet transmit support
Submitted by:	Andrea Bittau <a.bittau@cs.ucl.ac.uk>
2006-08-05 04:58:25 +00:00
Tai-hwa Liang
334ee2771b Really fix the typo this time: it should be sc->sc_drvbpf to be verified,
not ic->ic_drvbpf.
2006-06-05 23:06:03 +00:00
Tai-hwa Liang
edc428baef Fixing a typo in rev1.196. 2006-06-05 22:59:14 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
29d8617285 Add ELSA XI330 product. This is rebadged and sold as SMC 2532W-B and
I/O Data also resells it.  Add an alternative airvast an100 id.
2005-10-14 15:06:16 +00:00
Tai-hwa Liang
fec39060e2 Fixing WEP bustage in hostap mode since 5.2-RELEASE.
- WEP TX fix:

  The original code called software crypto, ieee80211_crypto_encap(),
which never worked since IEEE80211_KEY_SWCRYPT was never flagged due to
ieee80211_crypto_newkey() assumes that wi always supports hardware based
crypto regardless of operational mode(by virtue of IEEE80211_C_WEP).
This fix works around that issue by adding wi_key_alloc() to force
the use of s/w crypto.  Also if anyone ever decides to cleanup ioctl
handling where key changes wouldn't cause a call to wi_init() every time,
we'll need wi_key_alloc() to DTRT.

  In addition to that, this fix also adds code to wi_write_wep() to force
existing keys to be switched between h/w and s/w crypto such that an
operation mode change(sta <-> hostap) will flag IEEE80211_KEY_SWCRYPT
properly.

- WEP RX fix:

  Clear IEEE80211_F_DROPUNENC even in hostap mode.  Quote from Sam:

	"This is really gross but I don't see an easy way around it.
	By doing it we lose the ability to independently drop unencode
	frames (and support mixed wep/!wep use).  We should really be
	setting the EXCLUDE_UNENCRYPTED flag written in wi_write_wep
	based on IEEE80211_F_DROPUNENC but with our clearing it we can't
	depend on it being set properly."

Reported by:	Holm Tiffe <holm at freibergnet dot de>
Submitted by:	sam
MFC after:	3 days
2005-10-02 04:29:08 +00:00
Tai-hwa Liang
4f4035be47 Honouring ic->ic_dtim_period.
Submitted by:	sam
MFC after:	3 days
2005-10-02 03:55:07 +00:00
Ruslan Ermilov
a2f9548d05 Fix "taskqueue_drain with the following non-sleepable locks held"
witness(9) warning on detach.
2005-09-28 09:27:46 +00:00
Warner Losh
0ed03bc788 MFp4: save mac addr hint, eliminage OLDCARD shims 2005-09-22 05:11:50 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Scott Long
d85dcbcd54 Correct previous commit. 2005-08-29 20:06:02 +00:00
Warner Losh
08daf78765 Eliminate bogus seatbelt in wi_cmd. This may have been appropriate
for the spl-era locking, but now that we can have multiple, concurrent
interrupts for multiple wi devices, having a global check to make sure
at most one of them was in wi_cmd no longer makes sense.

MFC After: 2 decifortnight
2005-08-29 15:46:41 +00:00
Sam Leffler
80f05a81d9 fix media_status so devd recognizes the device as an 802.11 interface
Submitted by:	Robert C. Noland III
2005-08-13 00:04:42 +00:00
Sam Leffler
b5c9941514 Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
  channel instead of overloading ic->ic_bss->ni_chan (or in some
  drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
  state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
  more like a scan cache--look for an existing entry before adding
  a new one; this combined with ic_curchan use corrects handling of
  stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
  a new ieee80211_add_neighbor routine

Reviewed by:	avatar
Tested by:	avatar, Michal Mertl
MFC after:	2 weeks
2005-08-10 16:22:30 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Sam Leffler
d365f9c760 Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
  avoids potential use of one value for the other (e.g. setting
  powersavesleep to 0 clobbers the beacon interval used in hostap
  or ibss mode)
o bounds check the beacon interval received in probe response and
  beacon frames and drop frames with bogus settings; not clear
  if we should instead clamp the value as any alteration would
  result in mismatched sta+ap configuration and probably be more
  confusing (don't want to log to the console but perhaps ok with
  rate limiting)
o while here up max beacon interval to reflect WiFi standard

Noticed by:	Martin <nakal@nurfuerspam.de>
MFC after:	1 week
2005-08-08 03:30:57 +00:00
Warner Losh
584d11ee54 When the MAC address is reported all zeros, then error is necessarily
0.  This means that we 'succeed' the attach, even after we've freed
the internal data bits.  This leads to a panic when you eject the card
with this problem.

Set error = ENXIO in the mac read zeros case.
2005-08-05 04:56:14 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Sam Leffler
2c39b32c94 diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 16:50:18 +00:00
Warner Losh
ba8f34770d Add a boatload of new device ids, gleaned from the pcmcia-cs-3.2.8
distribution.  Add the appropriate devices to the man pages.

Obtained from: pcmcia-cs
Approved by: re (scottl)
2005-07-10 02:00:35 +00:00
Warner Losh
ab581af779 Eliminate unused argument in PCMCIA_CARD macro.
Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.

Approved by: re (dwhite)
2005-06-24 14:36:54 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Tai-hwa Liang
566c1555c6 Honouring current authmode setting. With this patch, my wi card can now
associate to an AP which uses shared WEP key authentication.

Tested with:	"ifconfig wi0 authmode shared"
Reviewed by:	imp, sam
2005-06-02 01:51:16 +00:00
Matthew N. Dodd
71ba49aa94 Invert conditional and use continue to reduce nesting. 2005-04-13 03:36:24 +00:00
Warner Losh
ee051f83d5 Unbreak style(9) breakage from last commit. We try to avoid defining
variables in internal blocks.
Also, go ahead and fail if we can't load the firmware.  It should have
failed like this, but never did (firmware loads generally don't fail).
2005-03-27 17:04:47 +00:00
Pawel Jakub Dawidek
ded25de729 Unbreak LINT. 2005-03-27 15:57:42 +00:00
Sam Leffler
155fb57323 purge dead code
Noticed by:	Coverity Prevent analysis tool
2005-03-26 23:51:39 +00:00
Sam Leffler
f6ef5ddaa4 correct logic so we recognize timeout on alloc
Noticed by:	Coverity Prevent analysis tool
2005-03-26 23:43:54 +00:00
Sam Leffler
0c97ab9691 reclaim mbuf chain when ieee80211_crypto_encap fails
Noticed by:	David Young
2005-03-08 17:01:03 +00:00
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Warner Losh
8d2ad0b460 The two PLANEX cards listed in pccarddevs, identified only by their
CIS, weren't actually used anywhere (other than the generic PC Card
code when certain variables are defined).  They aren't used in NetBSD
either.  Make things simpler by removing them.  Change PLANEX_2 to
PLANEX and tweak wi and owi to use that instead.  The PLANEX id seems
to actually be pci ID assigned to planex, not its pcmcia id.  Ooops.
I don't know if this is a reporting error from where this entry came
from, or if it is a mistake on PLANEX's part.  I suspect the latter,
as ACTIONTEC and NEWMEDIA made the same mistake (although new media
may be because it uses an advansys chip inside).  Make a note of this
in the file.  The 0xc entires may be JEITA assigned, so note that as
well.

# This leaves just 3 entries that are totally unknown: airvast, archos
# and edimax although the arivast number is the same assigned to
# avertec in usb...
2005-02-01 18:28:09 +00:00
Warner Losh
c5c0655590 Use Intersil chip names for the symbols, since many makers use the
intersil IDs but their own name in the CIS.
2005-01-20 18:34:22 +00:00
Warner Losh
7610c28cf1 Add support for SENAO SL-2511CD
Info submitted by: Paulo Fragoso
2005-01-20 17:46:05 +00:00
Warner Losh
c3bd3b5978 Call wi_free after we turn off the interrupts. If we call it before,
then we reference parts of the softc.

# My appologies, but this was sent to me by someone whose name I've lost.
2005-01-19 01:26:44 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Sam Leffler
3baeaf0b19 Eliminate some of the egregious bypass of the 802.11 state
machine; instead use the intended entry points.  There's still
too much incestuous knowledge about the internals of the
802.11 layer but this at least fixes adhoc mode.
2005-01-01 17:45:11 +00:00
Matthew N. Dodd
86906d256a Diff reduce wi_write_wep() relative to revision 1.168 2004-12-17 20:48:13 +00:00
Sam Leffler
181ab45653 Fix wep operation for station mode:
o don't encapsulate on tx; the chip expect a raw frame w/o the crypto header
o clear the WEP bit in the 802.11 header on rx so the 802.11 layer doesn't
  try to strip the crypto header
o clobber the "drop unencoded frames" state bit when privacy is enabled so
  rx'd frames we pass up to the 802.11 layer are not discarded as unencrypted

This stuff will need to be redone if anyone decides to add WPA support.
2004-12-17 03:57:16 +00:00
Sam Leffler
14ae1a9deb set ic_ibss_chan when entering RUN state to match ic_bss so the channel
reported when associated to an AP is correct
2004-12-17 03:36:24 +00:00
Sam Leffler
407a27b151 remove power save logic from the tx path; the driver isn't ready to support
it so don't mislead folks
2004-12-17 03:05:30 +00:00
Sam Leffler
f48445578b o Update for net80211 changes
o Import some minor fixes from netbsd
2004-12-08 17:36:28 +00:00
Max Laier
154b8df2ed Second part of ALTQ driver modifications, covering:
an(4), ath(4), hme(4), ndis(4), vr(4) and wi(4)

Please help testing: http://people.freebsd.org/~mlaier/ALTQ_driver/

Tested by:	Vaidas Damosevicius (an, ath, wi)
		Roman Divacky (vr)
Submitted by:	yongari (hme)
2004-08-01 23:58:04 +00:00
Max Laier
02b199f158 Link ALTQ to the build and break with ABI for struct ifnet. Please recompile
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.

__FreeBSD_version bump will follow.

Tested-by:	(i386)LINT
2004-06-13 17:29:10 +00:00