adds the new I-Data (Interleaved Data) message. This allows a user
to be able to have complete freedom from Head Of Line blocking that
was previously there due to the in-ability to send multiple large
messages without the TSN's being in sequence. The code as been
tested with Michaels various packet drill scripts as well as
inter-networking between the IETF's location in Argentina and Germany.
in the routine, which queues an ERROR chunk, instead on relyinh
on the callers to do so. Since one caller missed this, this actially
fixes a bug.
MFC after: 1 week
1) We were not handling (or sending) the IN_PROGRESS case if
the other side (or our side) was not able to reset (awaiting more data).
2) We would improperly send a stream-reset when we should not. Not
waiting until the TSN had been assigned when data was inqueue.
Reviewed by: tuexen
o Introduce a notion of "not ready" mbufs in socket buffers. These
mbufs are now being populated by some I/O in background and are
referenced outside. This forces following implications:
- An mbuf which is "not ready" can't be taken out of the buffer.
- An mbuf that is behind a "not ready" in the queue neither.
- If sockbet buffer is flushed, then "not ready" mbufs shouln't be
freed.
o In struct sockbuf the sb_cc field is split into sb_ccc and sb_acc.
The sb_ccc stands for ""claimed character count", or "committed
character count". And the sb_acc is "available character count".
Consumers of socket buffer API shouldn't already access them directly,
but use sbused() and sbavail() respectively.
o Not ready mbufs are marked with M_NOTREADY, and ready but blocked ones
with M_BLOCKED.
o New field sb_fnrdy points to the first not ready mbuf, to avoid linear
search.
o New function sbready() is provided to activate certain amount of mbufs
in a socket buffer.
A special note on SCTP:
SCTP has its own sockbufs. Unfortunately, FreeBSD stack doesn't yet
allow protocol specific sockbufs. Thus, SCTP does some hacks to make
itself compatible with FreeBSD: it manages sockbufs on its own, but keeps
sb_cc updated to inform the stack of amount of data in them. The new
notion of "not ready" data isn't supported by SCTP. Instead, only a
mechanical substitute is done: s/sb_cc/sb_ccc/.
A proper solution would be to take away struct sockbuf from struct
socket and allow protocols to implement their own socket buffers, like
SCTP already does. This was discussed with rrs@.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
proprietary binary format.
* Add support for a diagnostic information error cause.
The code is sysctlable and the default is 0, which
means it is not sent.
This is joint work with rrs@.
MFC after: 1 week
ABORT cause, since the user can also provide this kind of
information. So the receiver doesn't know who provided the
information.
While there: Fix a bug where the stack would send a malformed
ABORT chunk when using a send() call with SCTP_ABORT|SCT_SENDALL
flags.
MFC after: 3 days
chunks for each SCTP outgoing stream are in the send and
sent queue.
While there, improve the naming of NR-SACK related constants
recently introduced.
MFC after: 1 week
actually in it. This happens when SCTP receives an unknown chunk, which
requires the sending of an ERROR chunk, and there is no final padding but
the chunk is not 4-byte aligned.
Reported by yueting via rwatson@
MFC after: 3 days
* Decouple the path supervision using a separate HB timer per path.
* Add support for potentially failed state.
* Bring back RTO.min to 1 second.
* Accept packets on IP-addresses already announced via an ASCONF
* While there: do some cleanups.
Approved by: re@
MFC after: 2 months.
right mix. Still may need some tweaks but it
appears to almost not give away too much to an
RFC2581 flow, but can really minimize the amount of
buffers used in the net.
MFC after: 3 months
1) Add four new points that allow you to get more information
to cc algo's
2) Fix the case where user changes module on a existing TCB, in
such a case, the initialization module needs to be called on all nets.
3) Move htcp_cc structure to a union that other modules can use.
4) Add 5th point for get/set socket options for cc_module specific options
MFC after: 2 months
2) Add separate max-bursts for retransmit and hb. These
are set to sysctlable values but not settable via the
socket api. This makes sure we don't blast out HB's or
fast-retransmits.
3) Determine on the first data transmission on a net if
its local-lan (by being under or over a RTT). This
can later be used to think about different algorithms
based on locallan vs big-i (experimental)
4) The cwnd should NOT be allowed to grow when an ECNEcho
is seen (TCP has this same bug). We fix this in SCTP
so an ECNe being seen prevents an advance of cwnd.
5) CWR's should not be sent multiple times to the
same network, instead just updating the TSN being
transmitted if needed.
MFC after: 1 Month
1) We now remove ECN-Nonce since it will no longer continue as a I-D
2) Eliminate last_tsn_echo, this tied us to an assoc not the net
and thus we were not doing m-homing on the ECN-Echo senders side right.
3) Increment the count going out even if the TSN in lower in the pending
ECN-Echo, this way the receiver knows exactly how many packets were
marked even with network re-ordering
4) Fix so we DO NOT stop doing delayed sack if a ECN Echo is in queue
MFC after: 1 month
1) ECN was on an association basis, this is incorrect and
will not work with CMT or for that matter if the user
is sending to multiple addresses. This commit makes
ECN on a per path basis.
2) Adopt the new format for the ECN internet draft. This also
maintains compatability with old format chunks as well.
3) Keep track of the real time of a RTT down to micro seconds.
For some future conditional features (for like a data center
this is good information to have).
MFC after: 1 month
Fix the switching on/off of PF and NR-SACKs using sysctl.
Add minor improvement in handling malloc failures.
Improve the address checks when sending.
MFC after: 4 weeks
PR SCTP FWD-TSN's would not be sent and thus
cause a stalled connection. Also the rwnd
Calculation was also off on the receiver side for
PR-SCTP.
MFC after: 1 month
1) Only use both mapping arrays when NR sack is off. This
way we can hold off moving the cumack (not the best but
workable) when NR-sack is on.
2) We must make sure to just return on the move of the
bit to the NR array if the cum-ack as already went
past the TSN. This prevents marking a bit behind the
array and hitting the invariant code that panic's us.
MFC after: 1 week
We were only paying attention to the nr-mapping-array. Which
seems to make sense on the surface, by definition things
up to the cum-ack should be deliverable thus in the nr-mapping-array.
However (there is always a gotcha) thats not true when it
comes to large messages. The stack may hold the message
while re-assembling it not not deliver it based on several
thresholds. If that happens (which it would for smaller
large messages) then the cum-ack is figured wrong. We
now properly use both arrays in the cum-ack calculation.
MFC after: 1 week.
- Make sure that when you kick the streams you add correctly
using a 16 bit unsigned.
- Make sure when sending out you allow FWD-TSN to skip over
and list the ACKED chunks in the stream/seq list (so the
rcv will kick the stream)
MFC after: 3 days
- Slide the map at the proper place.
- Mark the bits in the nr_array ONLY if there
is no marking.
- When generating a FWD-TSN we allow us to skip past
ACKED chunks too.
MFC after: 1 weeks
* Fix delaying of SACK by taking out old optimization code
which does not optimize anymore.
* Fix fast retransmission of chunks abandoned by the
"number of retransmissions" policy.
MFC after: 3 days.
* Fix handling of mapping arrays when draining mbufs or processing
FORWARD-TSN chunks.
* Cleanup code (no duplicate code anymore for SACKs and NR-SACKs).
Part of this code was developed together with rrs.
MFC after: 2 weeks.
enabled. Basically most of the operations were incorrect causing
bad sacks when you enabled nr-sack. The fixes range across
4 files and unifiy most of the processing so that we only test
nr_sack flags to decide which type of sack to generate.
Optimization left for this is to combine the sack generation
code and make it capable of generating either sack thus shrinking
out a routine.
Reviewed by: tuexen@freebsd.org
mapping_array expansion would break. Basically
once we expanded the array we no longer had both
mapping arrays in sync which the sack processing code depends on.
This would mean we were randomly referring to memory that was probably
not there. This mostly just gave us bad sack results going back to the peer.
If INVARIENTS was on of course we would hit the panic routine in the sack_check
call.
We also add a print routine for the place where one would panic in
invarients so one can see what the main mapping array holds.
Reviewed by: tuexen@freebsd.org
MFC after: 2 weeks
1) When calculating the table offset for sliding the sack
array, the two byte values must be "ored" together in order
for us to do the correct sliding of the arrays.
2) We were NOT properly doing CC and other changes to things only
NR-Sacked. The solution here is to make a separate function that
will actually do both CC/updates and free things if its NR sack'd.
This actually shrinks out common code from three places (much better).
MFC after: 3 days
association setup.
* Fix a bug where message with illegal stream ids are not deleted.
* Fix a crash when reporting back unsent messages from the send_queue.
* Fix a bug related to INIT retransmission when the socket is already
closed.
* Fix a bug where associations were stalled when partial delivery API
was enabled.
* Fix a bug where the receive buffer size was smaller than the
partial_delivery_point.
Approved by: re, rrs (mentor)
MFC after: One day.