tested on the Pass 1.1 and 2.0 ThunderX machines in the Netperf cluster.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6453
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Allow to deallocate previously allocated ITS device along with
its interrupts. Interrupt numbers are being freed when the last
LPI number is no longer busy.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6351
supports the Security Extensions or not. This bit is not the same as the CPU one.
Currently we are not checking for either before trying to write to the special
registers. This can lead to problems on hardware or simulators that do not
provide the security extensions. Add the missing checks. Their interactions with
the CPU flag is not entirely clear to me but using a macro will make it easier
to quickly adjust the condition once the CPU bits are sorted as well.
Reviewed by: br
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6397
* In gic_v3_attach free the correct data on failure.
* Implement gic_v3_teardown_intr.
* Update the panic string when enabling/disabling an invalid interrupt.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
MSI or MSI-X interrupts, however this is enought to boot FreeBSD under the
ARM Foundation Model with a GICv3 interrupt controller.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
updated, and until further testing can be done, this is disabled for now.
It is expected arm64 will switch to this interface, and the old interface
will be removed before 11.0 is released.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
translate the pci rid to a controller ID. The translation could be based
on the 'msi-map' OFW property, a similar ACPI option, or hard-coded for
hardware lacking the above options.
Reviewed by: wma
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
disabled, however when we enable it it will default to assume memory is
not cache-coherent, unless either the tag was created or the parent was
marked as cache-coherent.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
list of memory that the kernel will need to sync when operating with a
non-cache coherent DMA engine.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
to ensure ordering between the CPU and device. As the CPU and DMA target
may be in different shareability domains they need to be full system
barriers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
To maintain coherence between cache and DMA memory appropriate
shareability flags need to be set in the PTE regardless of SMP
option.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6231
attachment. This is where it will live when we import intrng as it will
need to look at either the msi-parent or msi-map FDT properties.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
PCI-express HotPlug support is implemented via bits in the slot
registers of the PCI-express capability of the downstream port along
with an interrupt that triggers when bits in the slot status register
change.
This is implemented for FreeBSD by adding HotPlug support to the
PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges
representing downstream ports on HotPlug slots. The PCI-PCI bridge
driver registers an interrupt handler to receive HotPlug events. It
also uses the slot registers to determine the current HotPlug state
and drive an internal HotPlug state machine. For simplicty of
implementation, the PCI-PCI bridge device detaches and deletes the
child PCI device when a card is removed from a slot and creates and
attaches a PCI child device when a card is inserted into the slot.
The PCI-PCI bridge driver provides a bus_child_present which claims
that child devices are present on HotPlug-capable slots only when a
card is inserted. Rather than requiring a timeout in the RC for
config accesses to not-present children, the pcib_read/write_config
methods fail all requests when a card is not present (or not yet
ready).
These changes include support for various optional HotPlug
capabilities such as a power controller, mechanical latch,
electro-mechanical interlock, indicators, and an attention button.
It also includes support for devices which require waiting for
command completion events before initiating a subsequent HotPlug
command. However, it has only been tested on ExpressCard systems
which support surprise removal and have none of these optional
capabilities.
PCI-express HotPlug support is conditional on the PCI_HP option
which is enabled by default on arm64, x86, and powerpc.
Reviewed by: adrian, imp, vangyzen (older versions)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6136
boot issues when booting with FDT. It is planned to re-enable this at a
later date.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
arm_gic_fdt_alloc_resource. These were the old u_long where they should be
rman_res_t. Both of these are the same size on arm64 so this is just for
correctness, and would not have led to incorrect behaviour.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
the physmap. This will reduce the likelihood of an issue where we have
device memory mapped in the DMAP. This can only happen if it is within the
same 1G block of normal memory.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5938
2TB. The latter can be increased in 512GB chunks by adjusting the lower
address, however more work will be needed to increase the former.
There is still some work needed to only create a DMAP region for the RAM
address space as on ARM architectures all mappings should have the same
memory attributes, and these will be different for device and normal memory.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5859
SR-IOV devices usually use Alternative Routing ID (ARI).
In that case slot/device is always assumed to be 0 and
function/identifier is extended to 8 bits.
Fix interrupts delivery to VF IDs beyond 8 by using a correct
DevID if ARI is enabled.
Reviewed by: jhb, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5855
We're currently seeing how hard it would be to run CloudABI binaries on
operating systems cannot be modified easily (Windows, Mac OS X). The
idea is that we want to just run them without any sandboxing. Now
that CloudABI executables are PIE, this is already a bit easier, but TLS
is still problematic:
- CloudABI executables want to write to the %fs, which typically
requires extra system calls by the emulator every time it needs to
switch between CloudABI's and its own TLS.
- If CloudABI executables overwrite the %fs base unconditionally, it
also becomes harder for the emulator to store a backup of the old
value of %fs. To solve this, let's no longer overwrite %fs, but just
%fs:0.
As CloudABI's C library does not use a TCB, this space can now be used
by an emulator to keep track of its internal state. The executable can
now safely overwrite %fs:0, as long as it makes sure that the TCB is
copied over to the new TLS area.
Ensure that there is an initial TLS area set up when the process starts,
only containing a bogus TCB. We don't really care about its contents on
FreeBSD.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5836
Allow using DTRACE for performance analysis of userspace
applications - the function call stack can be captured.
This is almost an exact copy of AMD64 solution.
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: emaste, gnn, jhibbits
Differential Revision: https://reviews.freebsd.org/D5779
many SoCs these two are the same, however there is no requirement for this
to be the case, e.g. on the ARM Juno we boot on what the GIC thinks of as
CPU 2, but FreeBSD numbers it CPU 0.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This optimization attempts to utylize as wide as possible register store instructions to zero large buffers.
The implementation, if possible, will use 'dc zva' to zero buffer by cache lines.
Speedup: 60x faster memory zeroing
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5726
