Commit Graph

1266 Commits

Author SHA1 Message Date
Hans Petter Selasky
2c6eb461a7 Update the OFED Linux compatibility layer and
Mellanox hardware driver(s):

- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
  cancelling and starting a timeout.
- Implement more Linux scatterlist
  functions.

MFC after:	3 days
Sponsored by:	Mellanox Technologies
2014-10-15 13:40:29 +00:00
Sean Bruno
7d25e50fdf Repair build of tools/ath/athalq and define missing value len.
Reviewed by:	adrian
2014-10-13 16:48:01 +00:00
Cy Schubert
2777bfabc0 ipfilter bug #537 NAT rules with sticky have incorrect hostmap IP address.
This fixes when an IP address mapping is put in the hostmap table for
sticky NAT rules, it ends up having the wrong byte order.

Obtained from:	ipfilter CVS repo (r1.102), NetBSD CVS repo (r1.12)
2014-10-05 03:58:30 +00:00
Cy Schubert
3a77b75120 ipfilter bug #534 destination list hashing not endian neutral
Obtained from:	ipfilter CVS repo (r1.26), NetBSD CVS repo (r1.8)
2014-10-05 03:52:09 +00:00
Cy Schubert
685545cdc7 ipfilter bug #538 ipf_p_dns_del should return void
Obtained from:	ipfilter cvs repo (r1.8)
2014-10-05 03:48:09 +00:00
Cy Schubert
a7bd2acdab ipfilter bug #554 Determining why a ipf rule matches is hard -- replace
ipfilter rule compare with new ipf_rule_compare() function.

Obtained from:	ipfilter CVS rep (r1.129)
2014-10-05 03:45:19 +00:00
Cy Schubert
7db9f2ba58 ipfiler bug #550 filter rule list corrupted with inserted rules
Obtained from:	ipfilter CVS repo (r1.128); NetBSD CVS repo (r1.15)
2014-10-05 03:41:47 +00:00
Jung-uk Kim
313a0c13ef Merge ACPICA 20140926. 2014-10-02 19:11:18 +00:00
Adrian Chadd
7093d16e92 Remove this stuff - it's no longer needed here. 2014-09-30 03:29:46 +00:00
Adrian Chadd
9389d5a95e Add initial support for the AR9485 CUS198 / CUS230 variants.
These variants have a few differences from the default AR9485 NIC,
namely:

* a non-default antenna switch config;
* slightly different RX gain table setup;
* an external XLNA hooked up to a GPIO pin;
* (and not yet done) RSSI threshold differences when
  doing slow diversity.

To make this possible:

* Add the PCI device list from Linux ath9k, complete with vendor and
  sub-vendor IDs for various things to be enabled;
* .. and until FreeBSD learns about a PCI device list like this,
  write a search function inspired by the USB device enumeration code;
* add HAL_OPS_CONFIG to the HAL attach methods; the HAL can use this
  to initialise its local driver parameters upon attach;
* copy these parameters over in the AR9300 HAL;
* don't default to override the antenna switch - only do it for
  the chips that require it;
* I brought over ar9300_attenuation_apply() from ath9k which is cleaner
  and easier to read for this particular NIC.

This is a work in progress.  I'm worried that there's some post-AR9380
NIC out there which doesn't work without the antenna override set as
I currently haven't implemented bluetooth coexistence for the AR9380
and later HAL.  But I'd rather have this code in the tree and fix it
up before 11.0-RELEASE happens versus having a set of newer NICs
in laptops be effectively RX deaf.

Tested:

* AR9380 (STA)
* AR9485 CUS198 (STA)

Obtained from:	Qualcomm Atheros, Linux ath9k
2014-09-30 03:19:29 +00:00
Cy Schubert
f88ccb8bee ipfilter bug #558 add in some missing frag table function comments.
Approved by:	glebius (mentor)
Obtained from:	ipfilter CVS repo (r1.36)
2014-09-24 01:21:31 +00:00
Cy Schubert
11eb83e638 Check for NULL before de-refencing; in particular sel is assigned to NULL,
in the default case, and then couple of lines down we do sel->

Approved by:	glebius (mentor)
Obtained from:	NetBSD CVS repo (r1.5)
2014-09-22 16:45:28 +00:00
Adrian Chadd
88c0971a31 Quieten the AR9300 HAL attach a little - the setupXTxDesc method
is only called during attach now.

The EDMA TX path never calls this - only the legacy TX path does.
2014-09-20 01:18:36 +00:00
Adrian Chadd
f3bf91638b Quieten the AR9300 HAL probe a bit. 2014-09-20 01:17:02 +00:00
Adrian Chadd
e0fc1dc35a Don't double-call the ar9300 stub function method. 2014-09-20 01:16:41 +00:00
Gleb Smirnoff
56b61ca27a Remove ifq_drops from struct ifqueue. Now queue drops are accounted in
struct ifnet if_oqdrops.

Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-09-19 09:01:19 +00:00
Adrian Chadd
720e6a9c6f Add iwn-100 firmware.
The firmware is from the Linux firmware git repository; the intel
licence is the same as other firmware blobs.

Tested: iwn1: <Intel Centrino Wireless-N 100> mem 0xf4800000-0xf4801fff irq 19 at device 0.0 on pci5
2014-08-28 00:05:02 +00:00
Hans Petter Selasky
c7818b48b6 - Update the OFED Linux Emulation layer as a preparation for a
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.

MFC after:	1 week
Sponsored by:	Mellanox Technologies
2014-08-27 13:21:53 +00:00
Adrian Chadd
823b2cc633 Add some more OS_MARK() probes to the AR9300 HAL. 2014-08-11 00:03:50 +00:00
Adrian Chadd
2dc7b713de Work around some rather annoying chip hangs in the AR9331 chip.
If powersave is enabled and there are any transitions to network
or full sleep - even if they're pretty damned brief - eventually
something messes up somewhere and the bus glue between the AR9331
SoC and the AR9331 wifi stops working.  It shows up as stuck DMA
and LOCAL_TIMEOUT interrupts.

Both ath9k and the reference driver does a full chip reset if things
get stuck.

So:

* teach the AR9330 HAL about the force_full_reset option I added a
  couple of years ago;
* if the chip is currently in full-sleep, do a full-reset;
* if TX DMA and/or RX DMA are still enabled (eg, they did get
  stuck during reset) then do a full-reset.

Tested:

* AR9331 SoC, STA mode
2014-08-09 09:12:25 +00:00
Cy Schubert
e722d6f29a Honour WITH and WITHOUT_INET6_SUPPORT.
Approved by:	glebius (mentor)
MFC after:	3 days
2014-08-05 13:01:21 +00:00
Adrian Chadd
a32a326b6d store the AR9300 interrupts away when doing interrupt debugging. 2014-07-26 21:32:03 +00:00
Cy Schubert
42834773b3 Remove redundant USE_INET6 test that enables INET6 in the ipfilter userland
regardless of the setting in make.conf.

PR:		190964
Approved by:	glebius (mentor)
MFC after:	1 week
2014-07-11 16:26:51 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Cy Schubert
abb2c5c3a1 Fix case where fastroute or "to interface" is used with incorrect FIB.
PR:		183065
Submitted by:	p-freebsd-bugs@ziemba.us
Approved by:	glebius
MFC after:	1 week
2014-06-19 05:45:17 +00:00
Xin LI
91342c6607 Fix decoding of near CALL when address-size prefix (67h) is present.
Submitted by:	Wolf Ramovsky <wolf.ramovsky gmail.com>
		via core (peter)
MFC after:	2 weeks
2014-06-11 20:38:14 +00:00
Xin LI
79d183e85f Fix decoding of LEA when address-size prefix (67h) is present.
This is loosly based on Xorg changeset f57bc0e by Christian
Zander.

Submitted by:	Wolf Ramovsky <wolf.ramovsky gmail.com>
		via core (peter)
MFC after:	2 weeks
2014-06-11 20:31:41 +00:00
Xin LI
5097605520 Fix decoding of MOVSX.
Submitted by:	Wolf Ramovsky <wolf.ramovsky gmail.com>
		via core (peter)
MFC after:	2 weeks
2014-06-11 20:22:14 +00:00
Cy Schubert
2182dc81ee Move mutex creation from ipf_log_soft_init() to ipf_log_soft_create()
to be consistent with mutex destruction in ipf_log_soft_destroy(). As a
result mutex destruction in ipf_log_soft_fini() is redundant.

Approved by:	glebius (mentor)
Obtained from:	darrenr (author)
2014-05-24 06:05:21 +00:00
Adrian Chadd
9a4cf01f45 Add Atheros AR1111 support to the HAL.
This seems to probe/attach as an AR9485 and thus nothing else besides
adding the device id seems to be required.

ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 1926.8
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000

The NIC I have here is a 1 antenna, 2GHz only device.

Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC.

Tested:

* AR1111 (pretending not to be an AR9485, but failing miserably);
  STA mode with powersave.

Relnotes:	yes
Sponsored by:	Netgate
2014-05-05 07:58:05 +00:00
Adrian Chadd
0694aa7903 Add ar9300_get_next_tbtt().
Tested:

* AR9380, STA mode
2014-04-30 02:29:31 +00:00
Adrian Chadd
91e198f6a2 Only track the power state variable if the power state is changed,
not if the self-generated frame state is changed.
2014-04-30 02:03:47 +00:00
Adrian Chadd
17102f802f Note that the AR9380 and later hardware supports MYBEACON.
(Yes, I said AR5416 in the committed code.  It's still strictly true.)
2014-04-27 23:37:39 +00:00
Kevin Lo
28bc7834e0 Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.
Committed over the TP-LINK TL-WN725N v2 (RTL8188EUS) on amd64 with WPA.
2014-04-25 08:01:22 +00:00
Cy Schubert
3e6034e2df Implement the final missing sysctls by moving ipf_auth_softc_t from
ip_auth.c to ip_auth.h. ip_frag_soft_t moves from ip_frag.c to
ip_frag.h. mlfk_ipl.c creates sysctl MIBs that reference control blocks
that are dynamically created when IP Filter is loaded. This necessitated
creating them on-the-fly rather than statically at compile time.

Approved by:	glebius (mentor)
2014-04-07 19:32:56 +00:00
Adrian Chadd
e6f2713747 Fix ah_powerMode setting.
Reported by:	sbruno
2014-03-29 18:56:11 +00:00
Adrian Chadd
bbd4b4346c Also tag the current HAL power mode in ar9300_set_power_mode(). 2014-03-10 06:05:26 +00:00
Xin LI
f0bd5302dd MFV r262756:
Import xz-embedded from git.

This is from commit hash '6a8a2364434763a033781f6b2a605ace9a021013'.

This makes it possible to use CRC64 but for now it's intentionally
not added to build.
2014-03-05 01:33:15 +00:00
Gleb Smirnoff
e3a7aa6f56 - Remove rt_metrics_lite and simply put its members into rtentry.
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
  removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
  mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.

The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.

Discussed with:		melifaro
Sponsored by:		Netflix
Sponsored by:		Nginx, Inc.
2014-03-05 01:17:47 +00:00
Warner Losh
8ec77e7a22 These file have a, possibly dubious, GPL claim. Until that's sorted, move to gnu. 2014-02-28 16:26:44 +00:00
Warner Losh
63950cce66 Correct initial import script 2014-02-28 01:33:03 +00:00
Warner Losh
d4c30e9dfe Initial import of DTS files from Linux 2014-02-28 01:32:44 +00:00
Warner Losh
2705fd8194 Initial import of Linux/Vendor DTS files for various embedded boards. 2014-02-28 01:31:35 +00:00
Christian Brueffer
7f47cbd3ce Retire the nve(4) driver; nfe(4) has been the default driver for NVIDIA
nForce MCP adapters for a long time.

Yays:	jhb, remko, yongari
Nays:	none on the current and stable lists
2014-02-16 12:22:43 +00:00
Gleb Smirnoff
8327c83319 Substitute flags from historical mbuf(9) allocator with modern ones.
Sponsored by:	Nginx, Inc.
2014-01-16 13:42:14 +00:00
Gavin Atkinson
e1a5283697 Add firmware for Intel Centrino Wireless-N 105 devices.
Committed from:	Centrino 105 device
2014-01-11 18:56:48 +00:00
Gavin Atkinson
fd71662513 Add firmware version 18.168.6.1 (API version 6) for Intel Centrino
Wireless-N 135 wireless adapters, soon to be supported by iwn(4).

Committed using:	Laptop with Centrino 135 chipset
Obtained from:	wireless.kernel.org firmware downloads
2014-01-05 01:07:14 +00:00
Ian Lepore
6a101ebe72 Remove 'inline' from ar9300_init_pll(), it's too big to inline.
Submitted by:	adrian@
2013-11-08 16:28:00 +00:00
Gleb Smirnoff
f8ba95a1a8 Fix build. We need to include systm.h before if_var.h.
Pointy hat to:	glebius
2013-10-28 15:11:37 +00:00
Gleb Smirnoff
3122bb3880 Include lock.h before mutex.h. 2013-10-27 17:12:31 +00:00