Commit Graph

91 Commits

Author SHA1 Message Date
Konstantin Belousov
d86c1f0dc1 i386 4/4G split.
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.

By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap.  The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.

There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.

copyout(9) was rewritten to use vm_fault_quick_hold().  An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls.  The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline.  If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.

The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done.  The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging.  I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.

Tested by: pho
Discussed with:	bde
Sponsored by:	The FreeBSD Foundation
MFC after:	1 month
Differential revision:	https://reviews.freebsd.org/D14633
2018-04-13 20:30:49 +00:00
Warner Losh
5fe4723c70 Create a new ISA_PNP_INFO macro. Use this macro every where we have
ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
2017-12-23 06:49:27 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Scott Long
1ab9094c90 Hide a normal probe warning message under bootverbose, similar to atkbdc
Sponsored by:	Netflix
2017-09-18 18:42:28 +00:00
Konstantin Belousov
c9dad45f69 Add PCI Id for MosChip MCS9900.
Submitted by:	Robert Clausecker <fuz@fuz.su>
PR:	214670
MFC after:	1 week
2017-08-27 11:37:07 +00:00
Ed Maste
3e85b721d6 Remove register keyword from sys/ and ANSIfy prototypes
A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.

ANSIfy related prototypes while here.

Reviewed by:	cem, jhb
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D10193
2017-05-17 00:34:34 +00:00
Pedro F. Giffuni
4d24901ac9 sys/dev: Replace zero with NULL for pointers.
Makes things easier to read, plus architectures may set NULL to something
different than zero.

Found with:	devel/coccinelle
MFC after:	3 weeks
2017-02-20 03:43:12 +00:00
Yoshihiro Takahashi
2b375b4edd Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes:	yes
2017-01-28 02:22:15 +00:00
Justin Hibbits
da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
Justin Hibbits
c47476d7e6 Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count.  Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370
2016-02-27 03:38:01 +00:00
Justin Hibbits
2dd1bdf183 Convert rman to use rman_res_t instead of u_long
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources.  For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
Eitan Adler
2b400c83f2 Add support for SIIG x1 pci-e single parallel port card (JJ-E01211-S1)
PR:		kern/182217
Submitted by:	Craig Leres <leres@ee.lbl.gov>
MFC After:	1 week
2013-11-09 08:27:55 +00:00
Gleb Smirnoff
d0741ed4c3 Fix build. 2013-02-21 12:40:52 +00:00
Warner Losh
1eb7e5fe85 Replace splhigh() with critical_enter()/leave() to ensure we write the
config mode unlock sequence quickly enough. This likely isn't too critical,
since splhigh() has been a noop for a decade...
2013-02-21 00:27:51 +00:00
Warner Losh
37270a177d No longer need splhigh() since locking was done, delete it and
comments about it.
2013-02-21 00:26:31 +00:00
Hans Petter Selasky
3b12bdb58f Rename device_delete_all_children() into device_delete_children().
Suggested by:	jhb @ and marius @
MFC after:	1 week
2011-11-22 21:56:55 +00:00
Hans Petter Selasky
11bcf702f4 Move the device_delete_all_children() function from usb_util.c
to kern/subr_bus.c. Simplify this function so that it no longer
depends on malloc() to execute. Identify a few other places where
it makes sense to use device_delete_all_children().

MFC after:	1 week
2011-11-19 10:11:50 +00:00
Martin Wilke
c7fd2483c5 - Add support for MosChip 9865 Single 1284 Printer port
PR:		kern/152663
Submitted by:	Jonathan Chen <jonc@chen.org.nz>
Approved by:	rwatson (mentor)
2011-02-19 17:38:51 +00:00
Xin LI
1fc13a00e8 Add PCI ID for MCS9901's parallel port.
PR:		kern/144713
Submitted by:	gcooper
MFC after:	2 weeks
2010-03-23 20:08:18 +00:00
Kai Wang
64fc5491db Added entries for Lava SP-PCI (1 serial + 1 parallel) PCI card. The
card is a multifunction PCI and report itself as two logical devices.
2009-02-11 00:08:03 +00:00
Warner Losh
3fd8527379 reset_epp and ecp_sync both return int. 2009-02-05 19:31:55 +00:00
John Baldwin
2067d312d4 Add locking to ppc and ppbus and mark the whole lot MPSAFE:
- To avoid having a bunch of locks that end up always getting acquired as
  a group, give each ppc(4) device a mutex which it shares with all the
  child devices including ppbus(4), lpt(4), plip(4), etc.  This mutex
  is then used for all the locking.
- Rework the interrupt handling stuff yet again.  Now ppbus drivers setup
  their interrupt handler during attach and tear it down during detach
  like most other drivers.  ppbus(4) only invokes the interrupt handler
  of the device that currently owns the bus (if any) when an interrupt
  occurs, however.  Also, interrupt handlers in general now accept their
  softc pointers as their argument rather than the device_t.  Another
  feature of the ppbus interrupt handlers is that they are called with
  the parent ppc device's lock already held.  This minimizes the number
  of lock operations during an interrupt.
- Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE.
- lpbb(4) uses the ppc lock instead of Giant.
- Other plip(4) changes:
  - Add a mutex to protect the global tables in plip(4) and free them on
    module unload.
  - Add a detach routine.
  - Split out the init/stop code from the ioctl routine into separate
    functions.
- Other lpt(4) changes:
  - Use device_printf().
  - Use a dedicated callout for the lptout timer.
  - Allocate the I/O buffers at attach and detach rather than during
    open and close as this simplifies the locking at the cost of
    1024+32 bytes when the driver is attached.
- Other ppi(4) changes:
  - Use an sx lock to serialize open and close.
  - Remove unused HADBUS flag.
  - Add a detach routine.
  - Use a malloc'd buffer for each read and write to avoid races with
    concurrent read/write.
- Other pps(4) changes:
  - Use a callout rather than a callout handle with timeout().
  - Conform to the new ppbus requirements (regular mutex, non-filter
    interrupt handler).  pps(4) is probably going to have to become a
    standalone driver that doesn't use ppbus(4) to satisfy it's
    requirements for low latency as a result.
  - Use an sx lock to serialize open and close.
- Other vpo(4) changes:
  - Use the parent ppc device's lock to create the CAM sim instead of
    Giant.
- Other ppc(4) changes:
  - Fix ppc_isa's detach method to detach instead of calling attach.

Tested by:	  no one :-(
2009-01-21 23:10:06 +00:00
John Baldwin
284c87f60e Various whitespace and style fixes. 2008-11-16 17:42:02 +00:00
John Baldwin
ff80967485 Fix build with PPC_PROBE_CHIPSET enabled. 2008-10-22 19:39:16 +00:00
John Baldwin
ae6b868a2a Several cleanups to remove the need for explicit unit numbers and a few
other fixes:
- Add pointers back to device_t objects in softc structures instead
  of storing the unit and using devclass_get_device().
- Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device
  instead of just the first one.
- Store softc pointers in si_drv1 of character devices instead of
  pulling the unit number from the minor number and using
  devclass_get_softc() and devclass_get_device().
- Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor
  number.
- Destroy character devices for lpt(4) when detaching the device.
- Use bus_print_child_footer() instead of duplicating it in
  ppbus_print_child() and fix ppbus_print_child()'s return value.
- Remove unused AVM ivar from ppbus.
- Don't store the 'mode' ivar in the ppbus ivars since we always fetch it
  from the parent anyway.
- Try to detach all the child devices before deleting them in
  ppbus_detach().
- Use pause() instead of a tsleep() on a dummy address when polling the
  ppbus.
- Use if_printf() and device_printf() instead of explicit names with unit
  numbers.

Silence on:	current@
2008-10-21 18:30:10 +00:00
John Baldwin
ca3d37955c Rework the handling of interrupt handlers for children of ppc and ppbus:
- Retire IVARs for passing IRQs around.  Instead, ppbus and ppc now allow
  child devices to access the interrupt by via a rid 0 IRQ resource
  using bus_alloc_resource_any().
- ppc creates its own interrupt event to manage the interrupt handlers of
  child devices.  ppc does not allow child devices to use filters.  It
  could allow this if needed, but none of the current drivers use them
  and it adds a good bit of complication.  It uses
  intr_event_execute_handlers() to fire the child device interrupt handlers
  from its threaded interrupt handler.
- Remove the ppbus_dummy_intr() hack.  Now the ppc device always has an
  interrupt handler registered and we no longer bounce all the way up to
  nexus to manage adding/removing ppbus child interrupt handlers.  Instead,
  the child handlers are added and removed to the private interrupt event
  in the ppc device.
2008-09-15 22:26:32 +00:00
Yoshihiro Takahashi
c5fe188c44 Remove unneeded include. 2008-08-29 12:23:51 +00:00
John Baldwin
8fd40d8a9e Use bus_foo() rather than bus_space_foo() and remove bus handle and tag
from softc.
2008-08-22 18:43:19 +00:00
John Baldwin
19ab530d2a Use ppc_detach() for device_detach instead of ppc_attach().
MFC after:	1 week
2008-08-22 18:42:45 +00:00
Yoshihiro Takahashi
41f5bd0f6d Don't call bus_deactivate_resource() explicitly before calling
bus_release_resource().  This is needed for pc98 by upcoming nexus related
change.
2007-03-21 03:38:37 +00:00
Paolo Pisati
72565ac3e8 o Wrap ppc_setup_intr() at 80.
o Fix a bit the indentation.
2007-03-06 11:36:33 +00:00
John Baldwin
4a50bbc03e Whitespace fix. 2007-02-23 23:05:31 +00:00
John Baldwin
a96255b62d Use 'pause' in several places rather than trying to tsleep() on NULL (which
triggers a KASSERT) or local variables.  In the case of kern_ndis, the
tsleep() actually used a common sleep address (curproc) making it
susceptible to a premature wakeup.
2007-02-23 16:25:08 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Marcel Moolenaar
64220a7e28 Rewrite of puc(4). Significant changes are:
o  Properly use rman(9) to manage resources. This eliminates the
   need to puc-specific hacks to rman. It also allows devinfo(8)
   to be used to find out the specific assignment of resources to
   serial/parallel ports.
o  Compress the PCI device "database" by optimizing for the common
   case and to use a procedural interface to handle the exceptions.
   The procedural interface also generalizes the need to setup the
   hardware (program chipsets, program clock frequencies).
o  Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
   default and non-serdev devices are handled by the bus.
o  Use the serdev I/F to collect interrupt status and to handle
   interrupts across ports in priority order.
o  Sync the PCI device configuration to include devices found in
   NetBSD and not yet merged to FreeBSD.
o  Add support for Quatech 2, 4 and 8 port UARTs.
o  Add support for a couple dozen Timedia serial cards as found
   in Linux.
2006-04-28 21:21:53 +00:00
Marcel Moolenaar
df5fea7cad o Use __FBSDID
o  Whitespace fixes
o  Non-K&R functions
2006-04-26 21:25:13 +00:00
Marcel Moolenaar
cea4d8752f o Move ISA specific code from ppc.c to ppc_isa.c -- a bus front-
end for isa(4).
o  Add a seperate bus frontend for acpi(4) and allow ISA DMA for
   it when ISA is configured in the kernel. This allows acpi(4)
   attachments in non-ISA configurations, as is possible for ia64.
o  Add a seperate bus frontend for pci(4) and detect known single
   port parallel cards.
o  Merge PC98 specific changes under pc98/cbus into the MI driver.
   The changes are minor enough for conditional compilation and
   in this form invites better abstraction.
o  Have ppc(4) usabled on all platforms, now that ISA specifics
   are untangled enough.
2006-04-24 23:31:51 +00:00
Mitsuru IWASAKI
858a52f464 Import ACPI Dock Station support. Note that this is still very young.
Additional detach implementaions (or maybe improvement) for other
deivce drivers is required.

Reviewed by:	njl, imp
MFC after:	1 week
2006-04-15 12:31:34 +00:00
John Baldwin
93d74675d6 G/C unused variable. 2006-02-22 21:47:04 +00:00
John Baldwin
57fb5e6097 - Use bus_setup_intr() and bus_teardown_intr() to register device driver
interrupt handlers rather than BUS_SETUP_INTR() and BUS_TEARDOWN_INTR().
  Uses of the BUS_*() versions in the implementation of foo_intr methods
  in bus drivers were not changed.  Mostly this just means that some
  drivers might start printing diagnostic messages like [FAST] when
  appropriate as well as honoring mpsafenet=0.
- Fix two more of the ppbus drivers' identify routines to function
  correctly in the mythical case of a machine with more than one ppbus.
2006-02-22 18:16:26 +00:00
Ruslan Ermilov
f5fd56117e Add missing MODULE_DEPEND() so that ppbus.ko and these .ko's can be
loaded dynamically.
2005-12-21 10:54:47 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
Warner Losh
1e4500012d don't use C keyword register as CPP macro argument name 2005-04-12 23:32:26 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Doug Ambrisko
92f282ea0f Forgot an added file in the last commit. 2003-08-01 05:02:55 +00:00
Doug Ambrisko
a373227418 Add printer support to puc(4) driver.
-	Move isa/ppc* to sys/dev/ppc (repo-copy)
      -	Add an attachment method to ppc for puc
      -	In puc we need to walk the chain of parents.
Still to do, is to make ppc(4) & puc(4) work on other platforms.  Testers
wanted.

PR:		38372 (in spirit done differently)
Verified by:	Make universe (if I messed up a platform please fix)
2003-08-01 02:25:32 +00:00
David E. O'Brien
8c9bbf484a Use __FBSDID(). 2003-06-11 00:34:37 +00:00