Commit Graph

226 Commits

Author SHA1 Message Date
Poul-Henning Kamp
e6dcdf4dd1 Remove pbzero(), things we load zero their own bss.
Make VESA_SUPPORT default
1997-08-31 06:11:26 +00:00
Steve Price
1e915c361e Remove extraneous init parameter.
PR:		kern/3595
Submitted by:	Chiharu Shibata <chi@rd.njk.co.jp>
1997-08-23 23:38:12 +00:00
Poul-Henning Kamp
dd9346ce01 Oops, boot2 got too big. make VESA_SUPPORT nondefault. 1997-07-31 11:30:30 +00:00
Poul-Henning Kamp
d9f5f52664 Add support for booting in VESA 0x102 videomode. Corresponding patches to
syscons are being reviewed by sos.
1997-07-31 08:07:54 +00:00
Bruce Evans
eae4afa6c0 Removed support for stale options.
Removed unused targets.  (Is sizetest necessary?  It wasn't run.)

Added boot.img to CLEANFILES.
1997-07-21 16:12:52 +00:00
Bruce Evans
5f0539ec6c Saved a few bytes by omitting frame pointers, using byte-sized
instructions more (many cases were already intended to be byte-sized
but were missing prefixes so gas assembled them bogusly), and
rearranging a loop to test at the end.
1997-07-13 15:24:15 +00:00
Joerg Wunsch
f88ef34060 Make this compile again under -current. The modifications to io.c
and bios.S were small enough and have been merged back into their
respective files in biosboot/, conditionalized on CDBOOT.  Other
files might be merged at a later stage.

Caveat emptor: i cannot test this right now.
1997-07-12 10:23:31 +00:00
Joerg Wunsch
c38b4f3b91 (Part #2, after the Internet link broke totally yesterday.)
This is the long-threatened ISO 9660 CD-ROM bootstrap code.

This work has been sponsored by Plutotech International, Inc (who paid
the initial work), and interface business GmbH (where i did most of
the work).  A big thanks also goes to Bruce Evans, for his continuing
help and answering my stupid questions.

The code is basically functioning, with the following caveats:

. Rock Ridge attributes are not yet supported.
. Only SCSI CD-ROMs are supported, since i fail to see any possibility
  to determine the drive type using BIOS functions.  (Even for hard disks,
  this determination is done by a big hack only.)
. El Torito specifies a lot of crap and useless misfeatures, but crucial
  things like the ability to figure out the CD TOC have been ``forgotten''.
  Thus, if you wanna boot a multisession CD, you need to know at which CD
  block your session starts, and need to speciffy it using the @ clause.

. None of the CD-ROM controllers i've seen so far implements the full
  El Torito specification at all.  Adaptec is probably the closest, but
  they miss on non-emulation booting (which would be the most logical
  choice for us).  Thus, the current code bloats the 7.5 KB boot code
  up to 1.44 MB, in order to fake a `floppy' image.

  If you wanna use it, specify this file as the boot image on the
  command-line of the mksiosfs command (option -b).

  Caveat emptor: some versions of the Adaptec BIOS might even fail to
  access the CD-ROM at all, using the BIOS functions.  I think i've
  notice this for ver 1.26, the code has been tested with ver 1.23.

The boot string is as follows:

        [@sess-start] [filename] [-flags]

sess-start      Extend # where the last session starts, measured in
                CD-ROM blocks.

filename        As usual, but the input is case-insensitive by now
                (since we  don't grok RR anyway).

flags           As usual, but -C (use CDROM root f/s) is default, so
                specifying -C will decactivate this option (which is
                probably not what you want :).

A lot of cleanup work is probably required, and some of the files
could/should be merged back to biosboot, perhaps made conditional on
some #ifdef.  The malloc implementation that comes with cdboot might
also be useful for kzipboot.  (I needed a malloc() since the root dir
ain't fixed in size on a CD.)

I've been testing all this with a 2.2-STABLE as the base for biosboot.
I don't expect too many surprises, although i know the biosboot stuff
has been changed a lot in -current lately.  I'm sure Bruce will
comment on all this here anyway. :-)
1997-07-11 05:52:41 +00:00
Joerg Wunsch
5ee8126ec8 This is the long-threatened ISO 9660 CD-ROM bootstrap code.
This work has been sponsored by Plutotech International, Inc (who paid
the initial work), and interface business GmbH (where i did most of
the work).  A big thanks also goes to Bruce Evans, for his continuing
help and answering my stupid questions.

The code is basically functioning, with the following caveats:

. Rock Ridge attributes are not yet supported.
. Only SCSI CD-ROMs are supported, since i fail to see any possibility
  to determine the drive type using BIOS functions.  (Even for hard disks,
  this determination is done by a big hack only.)
. El Torito specifies a lot of crap and useless misfeatures, but crucial
  things like the ability to figure out the CD TOC have been ``forgotten''.
  Thus, if you wanna boot a multisession CD, you need to know at which CD
  block your session starts, and need to speciffy it using the @ clause.

. None of the CD-ROM controllers i've seen so far implements the full
  El Torito specification at all.  Adaptec is probably the closest, but
  they miss on non-emulation booting (which would be the most logical
  choice for us).  Thus, the current code bloats the 7.5 KB boot code
  up to 1.44 MB, in order to fake a `floppy' image.

  If you wanna use it, specify this file as the boot image on the
  command-line of the mksiosfs command (option -b).

  Caveat emptor: some versions of the Adaptec BIOS might even fail to
  access the CD-ROM at all, using the BIOS functions.  I think i've
  notice this for ver 1.26, the code has been tested with ver 1.23.

The boot string is as follows:

	[@sess-start] [filename] [-flags]

sess-start	Extend # where the last session starts, measured in
		CD-ROM blocks.

filename	As usual, but the input is case-insensitive by now
		(since we  don't grok RR anyway).

flags		As usual, but -C (use CDROM root f/s) is default, so
		specifying -C will decactivate this option (which is
		probably not what you want :).

A lot of cleanup work is probably required, and some of the files
could/should be merged back to biosboot, perhaps made conditional on
some #ifdef.  The malloc implementation that comes with cdboot might
also be useful for kzipboot.  (I needed a malloc() since the root dir
ain't fixed in size on a CD.)

I've been testing all this with a 2.2-STABLE as the base for biosboot.
I don't expect too many surprises, although i know the biosboot stuff
has been changed a lot in -current lately.  I'm sure Bruce will
comment on all this here anyway. :-)
1997-07-10 21:58:43 +00:00
Bruce Evans
080cec3cc4 Fixed description of -cv. 1997-07-05 02:08:09 +00:00
Bruce Evans
72ef571982 Don't depend <machine/cpufunc.h> including <sys/types.h>. 1997-07-01 00:29:33 +00:00
Philippe Charnier
91463ae299 Fix 2 typos. 1997-06-16 06:32:51 +00:00
Bruce Evans
fec712543d Load the kernel config file where userconfig (with option USERCONFIG_BOOT)
will see it.  The name of the file is obtained by appending ".config"
to the name of the kernel file.  If the file doesn't exist, then an
annoying message is printed.

Reduced the command line buffer size yet again from 4096 to 1024.  It is
oversized to defend against overrun in gets(), but data space is starting
to run out so the buffer size can't be as grossly oversized as before.
1997-06-14 10:00:42 +00:00
Tor Egge
43f83f0b47 Use ETHER_ADDR_LEN instead of ETHER_ADDR_SIZE. 1997-06-12 19:20:53 +00:00
Bruce Evans
e49dd0c779 This should have been committed with the changes to boot.c yesterday.
- Added support for "dual" internal/serial consoles (-D flag).  If -D is set,
  then all i/o from the boot blocks is to and from both the internal console
  and the serial console.  -D has no effect on the kernel (-h decides the
  kernel serial console as usual).  -D should normally be set in /boot.config.
- Get help messages from /boot.help.  You should copy boot.help from the
  biosboot directory to the root directory on the boot drive when you
  install new boot blocks.
- New, less invasive keyboard probe.  Enable keyboard probe dynamically (-P
  flag).  Should probably never be used (use -h instead).
- Fixed/improved initialization from boot.config.  It didn't interact correctly
  with the NAMEBLOCK option, and the initialization of the drive/unit/partition
  didn't stick when a non-default kernel name was entered.
- Don't reset or forget the default drive/unit/... or kernel name so often.
- Set the default kernel name to something unbootable after `?'.
- Display the defaults better.
- Removed PROBE_KEYBOARD_LOCK option (use -h instead).,
- Removed BOOT_FORCE_COMCONSOLE option (use device flag 0x20 instead).
- Removed -a (RB_HALT) flag.  This flag is only used for reboots.
Submitted by:	about 2/3 by yokota
1997-06-10 01:40:32 +00:00
Bruce Evans
de2cf96615 - Added support for "dual" internal/serial consoles (-D flag). If -D is set,
then all i/o from the boot blocks is to and from both the internal console
  and the serial console.  -D has no effect on the kernel (-h decides the
  kernel serial console as usual).  -D should normally be set in /boot.config.
- Get help messages from /boot.help.  You should copy boot.help from the
  biosboot directory to the root directory on the boot drive when you
  install new boot blocks.
- New, less invasive keyboard probe.  Enable keyboard probe dynamically (-P
  flag).  Should probably never be used (use -h instead).
- Fixed/improved initialization from boot.config.  It didn't interact correctly
  with the NAMEBLOCK option, and the initialization of the drive/unit/partition
  didn't stick when a non-default kernel name was entered.
- Don't reset or forget the default drive/unit/... or kernel name so often.
- Set the default kernel name to something unbootable after `?'.
- Display the defaults better.
- Removed PROBE_KEYBOARD_LOCK option (use -h instead).,
- Removed BOOT_FORCE_COMCONSOLE option (use device flag 0x20 instead).
- Removed -a (RB_HALT) flag.  This flag is only used for reboots.
Submitted by:	about 2/3 by yokota
1997-06-09 05:10:56 +00:00
Tor Egge
b93b7486b9 Fix a typo.
Submitted by:	Wolfgang Helbig <helbig@MX.BA-Stuttgart.De>
1997-05-31 18:29:58 +00:00
Bruce Evans
f79e6ee387 Staticize. 1997-05-27 16:26:39 +00:00
Bruce Evans
906265bada Removed some useless code:
- gcc assumes that %ecx and %edx are clobbered (due to calling
  conventions), thus there is no need for saving/restoring those two
  registers.
- %es is reset to default value by real_to_prot, thus there is no need
  for saving/restorig that register.
Submitted by:	tegge
1997-05-16 10:40:00 +00:00
Tor Egge
b262c3b12b Update netboot manual page.
Submitted by:	Luigi Rizzo <luigi@iet.unipi.it>
1997-05-15 19:04:33 +00:00
Tor Egge
f811abf08c Bring in some improved bootp support for netboot submitted by Luigi:
- TFTP is not needed any longer.
Add some other improvements:
      - swapsize is now detected if no value was specified.
      - resvport is used by default
      - merged code for setting/showing mount options for root/swap.
Submitted by:   Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1997-05-14 02:44:27 +00:00
Satoshi Asami
b1671e460a Add ${CFLAGS} to makerom command line. Note: don't add ${LDFLAGS} here,
it has a bunch of extra stuff defined above.

While I'm here, change "$(CFLAGS)" to "${CFLAGS}" to make all the rules
uniform.
1997-05-13 06:23:21 +00:00
Tor Egge
472ac7f0bd save/restore %ebx, %esi and %edi when calling bios routines.
Don't save/restore %ecx and %edx.
Reset segment limits when going to real mode.
Reviewed by:	phk (briefly)
1997-05-12 23:00:32 +00:00
Bruce Evans
72fa3798b4 Removed LDADD=-lc and associated DPADD. libc would probably break
things if it were actually used.
1997-04-25 19:38:01 +00:00
Bruce Evans
c24b67b188 Don't attempt to read past EOF.
Saved enough bytes to make room for this bloat (testing poff < inode.i_size
takes 56 bytes!) by copying fs to a local variable.
1997-03-15 16:49:51 +00:00
Bruce Evans
051fc6fab1 Fixed setting of default kernel name when there is no boot.config file.
Didn't fix a more serious problem when boot.config is empty - read()
can't handle empty files.

Reported by:	Chris Timmons <skynyrd@opus.cts.cwu.edu>
1997-03-12 18:48:31 +00:00
Bruce Evans
bdca44f670 Added -mno-486 to CFLAGS to force smaller code in case someone compiles
with CC="cc -m486".  This doesn't fix PR2381, since PR2381 is for 2.1.x.
1997-03-05 15:43:03 +00:00
Bruce Evans
e9ca7be82f Added some nfs #includes so that netboot compiles again. Lite2 made the
nfs includes even more order-dependent and less documented than before.
1997-03-01 17:59:04 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Bruce Evans
b0a5b85d06 Fixed biosboot to compile with Lite2. <sys/lock.h> is now a prerequisite
for <ufs/ufs/inode.h>.
1997-02-18 15:09:39 +00:00
Bruce Evans
8363c19687 Get defaults for the boot device (and flags) from the file
"boot.config" (relative to the root directory on the 'a' partition
on the first BSD slice) if it exists.  If it doesn't exist, then
the only visible changes should be that the kernel name isn't reset
to "/kernel" after looking it up fails and that the default name
is now "kernel".

The new function readfile() can be used for other things:
- reading help messages.
- reading splash screens.
- reading userconfig info.
1997-02-13 13:15:47 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
07addd421e Initialize the upper 16 bits of the memory sizes properly (to 0).
They were garbage that happened to be 0 in many cases.  (real_to_prot()
happens to leave the value of the real-mode %cr0 in %eax and the
memory-size BIOS calls usually don't touch the upper bits of %eax.
The upper 16 bits of %cr0 are usually 0 at boot time, at least on
486's.

Should be in 2.2.
1996-12-18 15:38:23 +00:00
Peter Wemm
825ba339df Add missing -I so that probe_keyboard.c can find <i386/isa/kbdio.h>. :-(
(Why, oh why did this include file end up in isa/ rather than include/ ?)
1996-12-15 01:25:54 +00:00
Martin Renters
204c7704d9 Two fixes:
makerom checksum check calculation was a no-op
	nb8390.c had a bug which caused packet_len to be incorrect
	for packets which wrapped in the buffer.
Submitted by:	Linux developers (I lost the email with their names)
1996-12-11 19:33:38 +00:00
Garrett Wollman
d051845d36 Don't depend on <net/if.h> including <sys/time.h> 1996-12-10 18:01:27 +00:00
Bruce Evans
9d12c4da86 Give up early for empty partitions. The offset for an empty
partition is 0, which is outside the slice unless the disk is
dangerously dedicated.  There is little error checking later, and
following garbage metadata outside the slice usually caused crashes,
Empty 'a' partitions are fairly easy to create by cloning the label
for the whole disk.

Fixed a missing newline in a related error message.
1996-12-10 14:07:42 +00:00
Nate Williams
c80383505d Update the bootblocks to use the new definitions that changed in the
recent psm/syscons/kbdio code update.

Submitted by:	Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1996-12-03 03:32:15 +00:00
Poul-Henning Kamp
ff301e1b9b Add a timeout here, just like in if_ed.c
Reviewed by:	phk
Submitted by:	Luigi Rizzo <luidi@labinfo.iet.unipi.it>
1996-11-28 09:54:38 +00:00
Peter Wemm
34429f3d2d Fix my previous (untested) commit. The probe routine now appears to work
again.

Something needs to be done about this in 2.2, since the code there doesn't
even compile anymore since the syscons/kbdio/psm merge into 2.2.
1996-11-24 08:06:01 +00:00
Peter Wemm
f2a58aec0a Make this compile again after the syscons/psm/kbdio changes that removed
the keyboard IO port definitions from <machine/console.h>.

Note: I do not have a machine available to test this yet,  I sent this
for review to several people who have not replied.

This is also totally busted in 2.2, which has half of the syscons/psm/kbdio
changes in it.  This really desperately needs to be tested and fixed
in 2.2 as well.
1996-11-23 07:38:25 +00:00
Bruce Evans
6a32566a7d Preserve %esi and %edi for get_diskinfo(). See the logs for similar fixes
in bios.S.  I only fixed the case that is known to be broken here.

Should be in 2.2.
1996-11-11 14:27:12 +00:00
Bruce Evans
2e2d9bc760 Preserve %esi and %edi for all BIOS calls. This is probably only necessary
for get_diskinfo(), whose BIOS call sets %es:%edi in some cases, although
most documentation says that it doesn't change %edi in the cases that
happened to matter (for hard disks).

This shall be in 2.1.6 and 2.2.

Submitted by:	Tor.Egge@idt.ntnu.no
		(except I kept the unnecessary preservation of %edx and %ecx)
1996-11-11 14:03:33 +00:00
Poul-Henning Kamp
59a95186d2 Fill in the bios-geometry array in struct bootinfo.
2.2 candidate.
1996-11-02 14:46:27 +00:00
Paul Traina
6564e095d3 Rationalize support for serial consoles running at baud rates other than 9600
baud.  This isn't particularly beautiful, but neither is it disgustingly
gross.
1996-11-02 02:24:39 +00:00
Bruce Evans
9e25bb3c6b Synchronized with biosboot/Makefile:
- use gcc-2.7.2 alignment features
- get CWARNFLAGS form <bsd.kern.mk>
- fixed whitespace differences.
1996-10-15 16:26:05 +00:00
Paul Traina
972a3f282a Expose the control mechanism for serial console boot so that the default
shipped with freebsd can be changed without modifying the Makefiles directly.

Creates:	BOOT_FORCE_COMCONSOLE
		BOOT_PROBE_KEYBOARD
		BOOT_PROBE_KEYBOARD_LOCK
		BOOT_COMCONSOLE			(port value for console)
1996-10-14 17:25:53 +00:00
Bruce Evans
14c0bb7c89 Oops, PROBE_KEYBOARD_LOCK wasn't supposed to be enabled by default. 1996-10-14 12:37:47 +00:00
Bruce Evans
50ec4d5916 Added option PROBE_KEYBOARD_LOCK which gives a serial console if the
keyboard is locked.
1996-10-08 22:41:34 +00:00
Bruce Evans
4fd6d53a24 Saved about 160 bytes by using the gcc-2.7 alignment options. 1996-10-08 22:35:48 +00:00