If KSTACK_PAGES was changed to anything alse than the default,
the value from param.h was taken instead in some places and
the value from KENRCONF in some others. This resulted in
inconsistency which caused corruption in SMP envorinment.
Ensure all places where KSTACK_PAGES are used the opt_kstack_pages.h
is included.
The file opt_kstack_pages.h could not be included in param.h
because was breaking the toolchain compilation.
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3094
the Vahalia' "Unix Internals" section 15.12 "Other TLB Consistency
Algorithms". The same algorithm is already utilized by the MIPS pmap
to handle ASIDs.
The PCID for the address space is now allocated per-cpu during context
switch to the thread using pmap, when no PCID on the cpu was ever
allocated, or the current PCID is invalidated. If the PCID is reused,
bit 63 of %cr3 can be set to avoid TLB flush.
Each cpu has PCID' algorithm generation count, which is saved in the
pmap pcpu block when pcpu PCID is allocated. On invalidation, the
pmap generation count is zeroed, which signals the context switch code
that already allocated PCID is no longer valid. The implication is
the TLB shootdown for the given cpu/address space, due to the
allocation of new PCID.
The pm_save mask is no longer has to be tracked, which (significantly)
reduces the targets of the TLB shootdown IPIs. Previously, pm_save
was reset only on pmap_invalidate_all(), which made it accumulate the
cpuids of all processors on which the thread was scheduled between
full TLB shootdowns.
Besides reducing the amount of TLB shootdowns and removing atomics to
update pm_saves in the context switch code, the algorithm is much
simpler than the maintanence of pm_save and selection of the right
address space in the shootdown IPI handler.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
In order to map memory from other domains when running on Xen FreeBSD uses
unused physical memory regions. Until now this memory has been allocated
using bus_alloc_resource, but this is not completely safe as we can end up
using unreclaimed MMIO or ACPI regions.
Fix this by introducing a new newbus method that can be used by Xen drivers
to request for unused memory regions. On amd64 we make sure this memory
comes from regions above 4GB in order to prevent clashes with MMIO/ACPI
regions. On i386 there's nothing we can do, so just fall back to the
previous mechanism.
Sponsored by: Citrix Systems R&D
Tested by: Gustau Pérez <gperez@entel.upc.edu>
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
shows no difference with the code removed.
On both amd64 and i386, assert that a released pmap is not active.
Proposed and reviewed by: alc
Discussed with: Svatopluk Kraus <onwahe@gmail.com>, peter
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
vectors to be dynamically allocated. This allows kernel modules like vmm.ko
to allocate unique IPI slots when loaded (as opposed to hard allocating one
or more vectors).
Also, reorganize the fixed IPI vectors to create a contiguous space for
dynamic IPI allocation.
Reviewed by: kib, jhb
Differential Revision: https://reviews.freebsd.org/D2042
r278854 introduced a race in the event channel handling code. We must make
sure that the pending bit is cleared before executing the filter, or else we
might miss other events that would be injected after the filter has ran but
before the pending bit is cleared.
While there also mask event channels while FreeBSD executes the ithread
bound to that event channel. This refrains Xen from injecting more
interrupts while the ithread has not finished it's work.
Sponsored by: Citrix Systems R&D
Reported by: sbruno, robak
Tested by: robak
Devices that use ISA IRQs expect them to be already configured, and don't
call bus_config_intr, which prevents those IRQs from working on Xen. In
order to solve it pre-register all the legacy IRQs with the default values
(edge triggered, low polarity) if no override is found.
While there add a panic if the registration of an interrupt override fails.
Sponsored by: Citrix Systems R&D
Improve and cleanup the Xen PIRQ event channel code:
- Remove the xi_shared field as it is unused.
- Clean the "pending" bit in the EOI handler, this is more similar to how
native interrupts are handled.
- Don't mask edge triggered PIRQs, edge trigger interrupts cannot be
masked.
- Panic if PHYSDEVOP_eoi fails.
- Remove the usage of the PHYSDEVOP_alloc_irq_vector hypercall because
it's just a no-op in the Xen versions that are supported by FreeBSD Dom0.
Sponsored by: Citrix Systems R&D
hw.x2apic_enable tunable allows disabling it from the loader prompt.
To closely repeat effects of the uncached memory ops when accessing
registers in the xAPIC mode, the x2APIC writes to MSRs are preceeded
by mfence, except for the EOI notifications. This is probably too
strict, only ICR writes to send IPI require serialization to ensure
that other CPUs see the previous actions when IPI is delivered. This
may be changed later.
In vmm justreturn IPI handler, call doreti_iret instead of doing iretd
inline, to handle corner conditions.
Note that the patch only switches LAPICs into x2APIC mode. It does not
enables FreeBSD to support > 255 CPUs, which requires parsing x2APIC
MADT entries and doing interrupts remapping, but is the required step
on the way.
Reviewed by: neel
Tested by: pho (real hardware), neel (on bhyve)
Discussed with: jhb, grehan
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
The data in MODINFOMD_MODULEP is packed by the loader as a 4 byte type, but
the amd64 kernel expects a vm_paddr_t, which is of size 8 bytes. Fix this by
saving it as 8 bytes in the loader and retrieving it using the proper type
in the kernel.
Sponsored by: Citrix Systems R&D
Implement a subset of the multiboot specification in order to boot Xen
and a FreeBSD Dom0 from the FreeBSD bootloader. This multiboot
implementation is tailored to boot Xen and FreeBSD Dom0, and it will
most surely fail to boot any other multiboot compilant kernel.
In order to detect and boot the Xen microkernel, two new file formats
are added to the bootloader, multiboot and multiboot_obj. Multiboot
support must be tested before regular ELF support, since Xen is a
multiboot kernel that also uses ELF. After a multiboot kernel is
detected, all the other loaded kernels/modules are parsed by the
multiboot_obj format.
The layout of the loaded objects in memory is the following; first the
Xen kernel is loaded as a 32bit ELF into memory (Xen will switch to
long mode by itself), after that the FreeBSD kernel is loaded as a RAW
file (Xen will parse and load it using it's internal ELF loader), and
finally the metadata and the modules are loaded using the native
FreeBSD way. After everything is loaded we jump into Xen's entry point
using a small trampoline. The order of the multiboot modules passed to
Xen is the following, the first module is the RAW FreeBSD kernel, and
the second module is the metadata and the FreeBSD modules.
Since Xen will relocate the memory position of the second
multiboot module (the one that contains the metadata and native
FreeBSD modules), we need to stash the original modulep address inside
of the metadata itself in order to recalculate its position once
booted. This also means the metadata must come before the loaded
modules, so after loading the FreeBSD kernel a portion of memory is
reserved in order to place the metadata before booting.
In order to tell the loader to boot Xen and then the FreeBSD kernel the
following has to be added to the /boot/loader.conf file:
xen_cmdline="dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga"
xen_kernel="/boot/xen"
The first argument contains the command line that will be passed to the Xen
kernel, while the second argument is the path to the Xen kernel itself. This
can also be done manually from the loader command line, by for example
typing the following set of commands:
OK unload
OK load /boot/xen dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga
OK load kernel
OK load zfs
OK load if_tap
OK load ...
OK boot
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D517
For the Forth bits:
Submitted by: Julien Grall <julien.grall AT citrix.com>
By default Xen binds all event channels to vCPU#0, and FreeBSD only shuffles
the interrupt sources once, at the end of the boot process. Since new event
channels might be created after this point (because new devices or backends
are added), try to automatically shuffle them at creation time.
This does not affect VIRQ or IPI event channels, that are already bound to a
specific vCPU as requested by the caller.
Sponsored by: Citrix Systems R&D
Mask the event channel source before trying to bind it to a CPU, this
prevents stray interrupts from firing while assigning them and hitting the
KASSERT in xen_intr_handle_upcall.
Sponsored by: Citrix Systems R&D
This allows the Grant-table code to attach directly to the xenpv bus,
allowing us to remove the grant-table initialization done in xenpv.
Sponsored by: Citrix Systems R&D
When running as a Xen PVH Dom0 we need to add custom buses that override
some of the functionality present in the ACPI PCI Bus and the PCI Bus. We
currently override the ACPI PCI Bus, but not the PCI Bus, so add a new
override for the PCI Bus and share the generic functions between them.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
conf/files.amd64:
- Add the new files.
x86/xen/xen_pci_bus.c:
- Generic file that contains the PCI overrides so they can be used by the
several PCI specific buses.
xen/xen_pci.h:
- Prototypes for the generic overried functions.
dev/xen/pci/xen_pci.c:
- Xen specific override for the PCI bus.
dev/xen/pci/xen_acpi_pci.c:
- Xen specific override for the ACPI PCI bus.
If the SCI is remapped to a non-ISA global interrupt notify the ACPI
subsystem about the override.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
This device is only attached to priviledged domains, and allows the
toolstack to interact with Xen. The two functions of the privcmd
interface is to allow the execution of hypercalls from user-space, and
the mapping of foreign domain memory.
Sponsored by: Citrix Systems R&D
i386/include/xen/hypercall.h:
amd64/include/xen/hypercall.h:
- Introduce a function to make generic hypercalls into Xen.
xen/interface/xen.h:
xen/interface/memory.h:
- Import the new hypercall XENMEM_add_to_physmap_range used by
auto-translated guests to map memory from foreign domains.
dev/xen/privcmd/privcmd.c:
- This device has the following functions:
- Allow user-space applications to make hypercalls into Xen.
- Allow user-space applications to map memory from foreign domains,
this is accomplished using the newly introduced hypercall
(XENMEM_add_to_physmap_range).
xen/privcmd.h:
- Public ioctl interface for the privcmd device.
x86/xen/hvm.c:
- Remove declaration of hypercall_page, now it's declared in
hypercall.h.
conf/files:
- Add the privcmd device to the build process.
This is needed by the event channel user-space device, that requires
registering event channels without unmasking them. intr_add_handler
will unconditionally unmask the event channel, so we avoid calling it
if no filter/handler is provided, and then the user will be in charge
of calling it when ready.
In order to do this, we need to change the opaque type
xen_intr_handle_t to contain the event channel port instead of the
opaque cookie returned by intr_add_handler, since now registration of
event channels without handlers are allowed. The cookie will now be
stored inside of the private xenisrc struct. Also, introduce a new
function called xen_intr_add_handler that allows adding a
filter/handler after the event channel has been registered.
Sponsored by: Citrix Systems R&D
x86/xen/xen_intr.c:
- Leave the event channel without a handler if no filter/handler is
provided to xen_intr_bind_isrc.
- Don't perform an evtchn_mask_port, intr_add_handler will already do
it.
- Change the opaque type xen_intr_handle_t to contain a pointer to
the event channel port number, and make the necessary changes to
related functions.
- Introduce a new function called xen_intr_add_handler that can be
used to add filter/handlers to an event channel after registration.
xen/xen_intr.h:
- Add prototype of xen_intr_add_handler.
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
Add the Xen specific implementation of pci_child_added to the Xen PCI
bus. This is needed so FreeBSD can register the devices it finds with
the hypervisor.
Sponsored by: Citrix Systems R&D
x86/xen/xen_pci.c:
- Add the Xen pci_child_added method.
This patch adds support for MSI interrupts when running on Xen. Apart
from adding the Xen related code needed in order to register MSI
interrupts this patch also makes the msi_init function a hook in
init_ops, so different MSI implementations can have different
initialization functions.
Sponsored by: Citrix Systems R&D
xen/interface/physdev.h:
- Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen
public interface.
x86/include/init.h:
- Add a hook for setting custom msi_init methods.
amd64/amd64/machdep.c:
i386/i386/machdep.c:
- Set the default msi_init hook to point to the native MSI
initialization method.
x86/xen/pv.c:
- Set the Xen MSI init hook when running as a Xen guest.
x86/x86/local_apic.c:
- Call the msi_init hook instead of directly calling msi_init.
xen/xen_intr.h:
x86/xen/xen_intr.c:
- Introduce support for registering/releasing MSI interrupts with
Xen.
- The MSI interrupts will use the same PIC as the IO APIC interrupts.
xen/xen_msi.h:
x86/xen/xen_msi.c:
- Introduce a Xen MSI implementation.
x86/xen/xen_nexus.c:
- Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI
implementation.
x86/xen/xen_pci.c:
- Introduce a Xen specific PCI bus that inherits from the ACPI PCI
bus and overwrites the native MSI methods.
- This is needed because when running under Xen the MSI messages used
to configure MSI interrupts on PCI devices are written by Xen
itself.
dev/acpica/acpi_pci.c:
- Lower the quality of the ACPI PCI bus so the newly introduced Xen
PCI bus can take over when needed.
conf/files.i386:
conf/files.amd64:
- Add the newly created files to the build process.
When the FreeBSD kernel is loaded from Xen the symtab and strtab are
not loaded the same way as the native boot loader. This patch adds
three new global variables to ddb that can be used to specify the
exact position and size of those tables, so they can be directly used
as parameters to db_add_symbol_table. A new helper is introduced, so callers
that used to set ksym_start and ksym_end can use this helper to set the new
variables.
It also adds support for loading them from the Xen PVH port, that was
previously missing those tables.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
ddb/db_main.c:
- Add three new global variables: ksymtab, kstrtab, ksymtab_size that
can be used to specify the position and size of the symtab and
strtab.
- Use those new variables in db_init in order to call db_add_symbol_table.
- Move the logic in db_init to db_fetch_symtab in order to set ksymtab,
kstrtab, ksymtab_size from ksym_start and ksym_end.
ddb/ddb.h:
- Add prototype for db_fetch_ksymtab.
- Declate the extern variables ksymtab, kstrtab and ksymtab_size.
x86/xen/pv.c:
- Add support for finding the symtab and strtab when booted as a Xen
PVH guest. Since Xen loads the symtab and strtab as NetBSD expects
to find them we have to adapt and use the same method.
amd64/amd64/machdep.c:
arm/arm/machdep.c:
i386/i386/machdep.c:
mips/mips/machdep.c:
pc98/pc98/machdep.c:
powerpc/aim/machdep.c:
powerpc/booke/machdep.c:
sparc64/sparc64/machdep.c:
- Use the newly introduced db_fetch_ksymtab in order to set ksymtab,
kstrtab and ksymtab_size.
The suspend/resume of event channels is already handled by the xen_intr_pic.
If those methods are set on the PIRQ PIC they are just called twice, which
breaks proper resume. This fix restores migration of FreeBSD guests to a
working state.
Sponsored by: Citrix Systems R&D
Also disable a couple of ACPI devices that are not usable under Dom0.
To this end a couple of booleans are added that allow disabling ACPI
specific devices.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
x86/xen/xen_nexus.c:
- Return BUS_PROBE_SPECIFIC in the Xen Nexus attachement routine to
force the usage of the Xen Nexus.
- Attach the ACPI bus when running as Dom0.
dev/acpica/acpi_cpu.c:
dev/acpica/acpi_hpet.c:
dev/acpica/acpi_timer.c
- Add a variable that gates the addition of the devices.
x86/include/init.h:
- Declare variables that control the attachment of ACPI cpu, hpet and
timer devices.
Allow a privileged Xen guest (Dom0) to parse the MADT ACPI interrupt
overrides and register them with the interrupt subsystem.
Also add a Xen specific implementation for bus_config_intr that
registers interrupts on demand for all the vectors less than
FIRST_MSI_INT.
Sponsored by: Citrix Systems R&D
x86/xen/pvcpu_enum.c:
- Use helper functions from x86/acpica/madt.c in order to parse
interrupt overrides from the MADT.
- Walk the MADT and register any interrupt override with the
interrupt subsystem.
x86/xen/xen_nexus.c:
- Add a custom bus_config_intr method for Xen that intercepts calls
to configure unset interrupts and registers them on the fly (if the
vector is < FIRST_MSI_INT).
Lower the quality of the MADT ACPI enumerator, so on Xen Dom0 we can
force the usage of the Xen mptable enumerator even when ACPI is
detected.
This is needed because Xen might restrict the number of vCPUs
available to Dom0, but the MADT ACPI table parsed in FreeBSD is the
native one (which enumerates all the CPUs available in the system).
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
x86/acpica/madt.c:
- Lower MADT enumerator quality to -50.
x86/xen/pvcpu_enum.c:
- Rise Xen PV enumerator to 0.
This change inserts the Xen interrupt subsystem (event channels)
initialization between the system interrupt initialization and the IO
APIC source registration.
This is needed when running on Dom0, that routes physical interrupts
on top of event channels, so that the interrupt sources found during
IO APIC initialization can be registered using the Xen interrupt
subsystem.
The resulting order in the SI_SUB_INTR stage is the following:
- System intr initialization
- Xen intr initalization
- IO APIC source registration
Sponsored by: Citrix Systems R&D
x86/x86/local_apic.c:
- Change order of apic_setup_io to be called after xen interrupt
subsystem is setup.
x86/xen/xen_intr.c:
- Init Xen event channels before apic_setup_io.
Add a new DDB command to dump all registered event channels.
Sponsored by: Citrix Systems R&D
x86/xen/xen_intr.c:
- Add a new xen_evtchn command to DDB in order to dump all
information related to event channels.
Mask all event channels during initialization. This is done so that we
don't receive spurious interrupts while dynamically registering new
event channels. There's a small window during registration where an
event channel can fire before we have attached a handler to it.
Sponsored by: Citrix Systems R&D
x86/xen/xen_intr.c:
- Mask all event channels on init.
This allows Dom0 to manage physical hardware, redirecting the
physical interrupts to event channels.
Sponsored by: Citrix Systems R&D
x86/xen/xen_intr.c:
- Expand struct xenisrc to hold the level and triggering of PIRQ
event channels.
- Implement missing methods in xen_intr_pirq_pic.
- Allow xen_intr_alloc_isrc to take a vector parameter that globally
identifies the interrupt. This is only used for PIRQs that are
bound to a specific hardware IRQ.
- Introduce xen_register_pirq used to register IO APIC legacy PIRQ
interrupts.
- Add support for the dynamic PIRQ EOI map, this shared memory is
modified by Xen (if it suppoorts that feature), and notifies the
guest if an EOI is needed or not. If it's not available fall back
to the old implementation using PHYSDEVOP_irq_status_query.
- Rename xen_intr_isrc_count to xen_intr_auto_vector_count and
replace it's usages.
- Align static variables by name.
xen/xen_intr.h:
- Add prototype for xen_register_pirq.
Fix the gate in xen_pv_lapic_ipi_vectored to prevent access to element
at position nitems(xen_ipis).
Sponsored by: Citrix Systems R&D
Coverity ID: 1223203
Approved by: gibbs
Create the necessary hooks in order to provide a Xen PV APIC
implementation that can be used on PVH. Most of the lapic ops
shouldn't be called on Xen, since we trap those operations at a higher
layer.
Sponsored by: Citrix Systems R&D
Approved by: gibbs
x86/xen/hvm.c:
x86/xen/xen_apic.c:
- Move IPI related code to xen_apic.c
x86/xen/xen_apic.c:
- Introduce Xen PV APIC implementation, most of the functions of the
lapic interface should never be called when running as PV(H) guest,
so make sure FreeBSD panics when trying to use one of those.
- Define the Xen APIC implementation in xen_apic_ops.
xen/xen_pv.h:
- Extern declaration of the xen_apic struct.
x86/xen/pv.c:
- Use xen_apic_ops as apic_ops when running as PVH guest.
conf/files.amd64:
conf/files.i386:
- Include the xen_apic.c file in the build of i386/amd64 kernels
using XENHVM.
This is needed for Xen PV(H) guests, since there's no hardware lapic
available on this kind of domains. This commit should not change
functionality.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Approved by: gibbs
amd64/include/cpu.h:
amd64/amd64/mp_machdep.c:
i386/include/cpu.h:
i386/i386/mp_machdep.c:
- Remove lapic_ipi_vectored hook from cpu_ops, since it's now
implemented in the lapic hooks.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Use lapic_ipi_vectored directly, since it's now an inline function
that will call the appropiate hook.
x86/x86/local_apic.c:
- Prefix bare metal public lapic functions with native_ and mark them
as static.
- Define default implementation of apic_ops.
x86/include/apicvar.h:
- Declare the apic_ops structure and create inline functions to
access the hooks, so the change is transparent to existing users of
the lapic_ functions.
x86/xen/hvm.c:
- Switch to use the new apic_ops.
AP startup on PVH follows the PV method, so we need to add a hook in
order to diverge from bare metal.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Add hook for start_all_aps on native (using native_start_all_aps
defined in mp_machdep).
amd64/amd64/mp_machdep.c:
- Make some variables global because they will also be used by the
Xen PVH AP startup code.
- Use the start_all_aps hook to start APs.
- Rename start_all_aps to native_start_all_aps.
amd64/include/smp.h:
- Add declaration for native_start_all_aps.
x86/include/init.h:
- Declare start_all_aps hook in init_ops.
x86/xen/pv.c:
- Pick external declarations from mp_machdep.
- Introduce Xen PV code to start APs on PVH.
- Set start_all_aps init hook to use the Xen PVH implementation.
On PVH we don't need to init the shared info page, or disable emulated
devices. Also, make sure PV IPIs are set before starting the APs.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/xen/hvm.c:
- Return early from functions that are no-ops on Xen PVH guests.
- In order to make sure PV IPIs are setup before AP startup,
initialize them in SI_SUB_SMP-1.
On PVH there's no ACPI, so the CPU enumeration must be implemented
using Xen hypercalls.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/xen/pvcpu_enum.c:
- Enumerate avaiable vCPUs on PVH by using the VCPUOP_is_up
hypercall.
- Set vcpu_id for PVH guests.
conf/files.amd64:
- Include the PV CPU enumerator in the XENHVM build.
Currently XEN (PV) and XENHVM (PVHVM) ports use different ways to
issue hypercalls, unify this by filling the hypercall_page under HVM
also.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/include/xen/hypercall.h:
- Unify Xen hypercall code by always using the PV way.
i386/i386/locore.s:
- Define hypercall_page on i386 XENHVM.
x86/xen/hvm.c:
- Fill hypercall_page on XENHVM kernels using the HVM method (only
when running as an HVM guest).
e820 memory map is fetched using a hypercall under Xen PVH, so add a
hook to init_ops in oder to diverge from bare metal and implement a
Xen variant.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/include/init.h:
- Add a parse_memmap hook to init_ops, that will be called to fetch
and parse the memory map.
amd64/amd64/machdep.c:
- Decouple the fetch and the parse of the memmap, so the parse
function can be shared with Xen code.
- Move code around in order to implement the parse_memmap hook.
amd64/include/pc/bios.h:
- Declare bios_add_smap_entries (implemented in machdep.c).
x86/xen/pv.c:
- Implement fetching of e820 memmap when running as a PVH guest by
using the XENMEM_memory_map hypercall.
When running as a PVH guest, there's no emulated i8254, so we need to
use the Xen PV timer as the early source for DELAY. This change allows
for different implementations of the early DELAY function and
implements a Xen variant for it.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
dev/xen/timer/timer.c:
dev/xen/timer/timer.h:
- Implement Xen early delay functions using the PV timer and declare
them.
x86/include/init.h:
- Add hooks for early clock source initialization and early delay
functions.
i386/i386/machdep.c:
pc98/pc98/machdep.c:
amd64/amd64/machdep.c:
- Set early delay hooks to use the i8254 on bare metal.
- Use clock_init (that will in turn make use of init_ops) to
initialize the early clock source.
amd64/include/clock.h:
i386/include/clock.h:
- Declare i8254_delay and clock_init.
i386/xen/clock.c:
- Rename DELAY to i8254_delay.
x86/isa/clock.c:
- Introduce clock_init that will take care of initializing the early
clock by making use of the init_ops hooks.
- Move non ISA related delay functions to the newly introduced delay
file.
x86/x86/delay.c:
- Add moved delay related functions.
- Implement generic DELAY function that will use the init_ops hooks.
x86/xen/pv.c:
- Set PVH hooks for the early delay related functions in init_ops.
conf/files.amd64:
conf/files.i386:
conf/files.pc98:
- Add delay.c to the kernel build.
