Commit Graph

32 Commits

Author SHA1 Message Date
Matthew N. Dodd
5bff20ef7c Add quirk for LOGITECH WMRPAD.
Submitted by:	Mathew Kanner <mat@cnd.mcgill.ca>
2003-04-10 08:25:09 +00:00
MIHIRA Sanpei Yoshiro
7d44829c5e Add support YAMAHA NetVolante Routers
NetVolante RTA54i Broadband&ISDN Router
	NetVolante RTA55i Broadband VoIP Router
	NetVolante RTW65b Broadband Wireless Router
	NetVolante RTW65i Broadband&ISDN Wireless Router

PR:		bin/42574
Submitted by:	Yoshihiko Sarumaru <mistral@imasy.or.jp>
2003-02-12 13:20:39 +00:00
Warner Losh
3225a9881d Update to correct NetBSD Id 2003-01-02 04:22:44 +00:00
Warner Losh
1732632481 MFNetBSD through 1.42 (to be committed in a moment by me).
o Whitespace nits
o NEODIO added
2003-01-02 04:15:55 +00:00
Warner Losh
82e10e2428 It appears that the SANYO SCP-4900 needs similar quirks to the
Metricom Ricochet GS modem.  Add them here.

# A new umodem appears to be needed to make the sanyo phone work, but that's
# more extensive and will come after coordination.
2003-01-01 20:21:48 +00:00
Poul-Henning Kamp
86383b37c0 Fix a typo in the definition of HP1220C and add a quick entry for
broken bidir mode for at as well.
2002-04-06 13:28:02 +00:00
Nick Hibma
e1f5734cbe Pull in the most recent version of usb_quirks.h and propagate the necessary
changes to the various files.

Also, pull in most of the current usb_subr.c file.
2001-07-05 10:12:59 +00:00
Nick Hibma
4e457f4298 AcerScan 320U's are braindead. Sometimes they do not return strings
descriptors and if they do the strings are nonsense.
2000-11-02 20:42:34 +00:00
Nick Hibma
03eb1a83f8 Make the Ricochet modems work through the USB interface.
Tested by:	jim
Obtained from:	NetBSD
2000-11-01 17:35:57 +00:00
Nick Hibma
998b1e80fc Sync with NetBSD:
Add quirks for self-powered hubs that are not.
2000-05-14 19:51:38 +00:00
Nick Hibma
128aa3af3c Change Lennart's e-mail address. 2000-05-14 16:43:10 +00:00
Nick Hibma
cdb51d12a6 OpenBSD has a broken debugger that does not grok static. Use a
#define Static  static

that the OpenBSD folks can define it to be empty if they like.
2000-04-03 20:58:30 +00:00
Bill Paul
a6d9a40e81 More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
  following improvements:
        o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
          quirk. This allows drivers to specify busy waiting only for
          certain transfers (namely control transfers for reading/writing
          registers and stuff).
        o New USBD_FORCE_SHORT_XFER flag can be used to deal with
          devices like the ADMtek Pegasus that sense the end of bulk OUT
          transfers in a special way (if a transfer is exactly a multiple
          of 64 bytes in size, you need to send an extra empty packet
          to terminate the transfer).
        o usbd_open_pipe_intr() now accepts an interval argument which
          can be used to change the rate at which the interrupt callback
          routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
          value specified in the device's config data, but drivers can
          override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
  control transfers. We no longer force the non-tsleep hack for
  bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
  need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
  usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
  when a device has been detached, and use this flag to perform
  tests to prevent the drivers from trying to do control transfers
  if this is the case. This is necessary because calling if_detach()
  with INET6 enabled will eventually result in a call to the driver's
  ioctl() routine to delete the multicast groups on the interface,
  which will result in attempts to perform control transfers. (It's
  possible this also happens even without INET6 support enabled.) This
  is pointless since we know that if the detach method has been called,
  the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
  to initialize the device states without trying to close and re-open the
  pipes. This is partly because we don't want to frob things at interrupt
  context, but also because this doesn't seem to work right and I don't
  want to panic the system just because a USB device may have stopped
  responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
  transfer is needed. Unfortunately, the design of the chip makes it hard
  to get this exactly right. Hopefully, this will go away once either
  Nick or Lennart finds the bug in the uhci driver that makes this ugly
  hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Bill Paul
4f0a6f0403 Bunch of updates:
- Add vendor/device ID for Corega USB-T ethernet adapter to necessary
  places so that it will work with the kue driver.

- Add vendor/device ID for CATC Netmate devices for driver to be added
  soon.

- Get really crazy about netisr stuff: avoid doing any mbuf allocations
  or deallocations at splbio/splusb.

- Fix if_aue driver so that it works with LinkSys USB100TX: you need
  to flip the GPIO bits just the right way to put the PHY in the right
  mode.
2000-01-13 20:13:58 +00:00
Bill Paul
61ebfeecad Add the vendor/device IDs for the LinkSys USB100TX.
Note: the .INF file for LinkSys's driver says the vendor ID is 0x66b,
however this does not agree with the vendor ID listed for LinkSys in
the company list from www.usb.org. In fact, 0x66b doesn't seem to appear
in the company list at all. Furthermore, this same vendor ID crops
up in some of the D-Link .INF files. Frankly I don't know what the heck
is going on here, but I need to add 0x66b to usbdevs and call it
something, so here we are.
2000-01-08 07:32:48 +00:00
Bill Paul
d04bb221f3 Add the vendor and device IDs for a whole bunch of additional USB
ethernet adapters that are supported by the aue and kue drivers.
There are actually a couple more out there from Accton, Asante and
EXP Computer, however I was not able to find any Windows device
drivers for these on their servers, and hence could not harvest
their vendor/device ID info. If somebody has one of these things
and can look in the .inf file that comes with the Windows driver,
I'd appreciate knowing what it says for 'VID' and 'PID.'

Additional adapters include: the D-Link DSB-650 and DSB-650TX, the
SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101.
These are all mentioned in the man pages, relnotes and LINT.

Also correct the date in the kue(4) man page. I wrote this thing
on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
Bill Paul
a40a664637 Correct the vendor ID for KLSI: it's actually 0x5e9. 0x3e8 is the
vendor ID for Aox Inc, which makes the controller engine and/or
firmware for the KLSI chip.
2000-01-05 18:25:53 +00:00
Bill Paul
dfd1e98eac Add device driver support for USB ethernet adapters based on the
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).

Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.

Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
Bill Paul
ed63a7aaef This commit adds device driver support for the ADMtek AN986 Pegasus
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.

Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.

Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.

Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.

Highlights:

- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
1999-12-28 02:01:18 +00:00
Nick Hibma
3475de90b2 Add a quirk for the Altec ASC495 speakers. They pretend to support the
audio class, but they don't
1999-11-28 20:48:08 +00:00
Nick Hibma
3241be7550 Synchronisation with NetBSD as of 1999/11/16:
Cleaning up the code:
- Declare many functions static
- Change variable names to make them more self explanatory
- Change usbd_request_handle -> usbd_xfer_handle
- Syntactical changes
- Remove some unused code
- Other KNF changes

Interrupt context handling
- Change delay to usbd_delay_ms were possible (takes polling mode into
  account)
- Change detection mechanism for interrupt context

Add support for pre-allocation DMA-able memory by device driver

Add preliminary support for isochronous to the UHCI driver (not for OHCI
yet).

usb.c, uhci.c, ohci.c
- Initial attempt at detachable USB host controllers
- Handle the use_polling flag with a lttle more care and only set it if
we are cold booting.

usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c
- Make sure an aborted pipe is marked as not running.
- Start queued request in the right order.
- Insert some more DIAGNOSTIC sanity checks.
- Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.

usb.c, usb_subr.c
- Add an event mechanism so that a userland process can watch devices
  come and go.

ohci.c
- Handle the case when a USB transfer is so long that it crosses two
  page (4K) boundaries.  OHCI cannot do that with a single TD so we make
  a chain.

ulpt.c
- Use a bigger buffer when transferring data.
- Pre-allocate the DMA buffer.  This makes the driver slightly more
  efficient.
- Comment out the GET_DEVICE_ID code, because for some unknown reason it
  causes printing to fail sometimes.

usb.h
- Add a macro to extract the isoc type.
- Add a macro to check whether the routine has been entered after splusb
  and if not, complain.

usbdi.c
- Fix a glitch in dequeueing and aborting requests on interrupt pipes.
- Add a flag in the request to determine if the data copying is done by
  the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
Nick Hibma
2c15f8aa97 Add many new devicelabels
Rename a few (I wish companies would stop buying each other)

Add a quirk entry for hubs that say they are self powered but are
in fact bus powered (usage in uhub follows shortly).
1999-11-12 23:31:03 +00:00
Nick Hibma
0b0f3f6c3d The Qtronix keyboard has a built in PS/2 port for a mouse.
It however posts a bogus button up event once in a while. Whenever
we receive dx=dy=dz=buttons=0 we postpone adding it to the queue for
50msecs with a timeout. If in the meantime something else is posted
the event is ignored.

This avoids the problem Nik Sayer reported. He noticed that X windows
would drop and pick up a window once in a while.

Thanks, Nik, for supplying me with the keyboard to fix the problem!
1999-11-08 23:58:33 +00:00
Nick Hibma
24b4921ad1 Remove superfluous header file includes.
Pushed-By:	phk
1999-11-08 21:06:21 +00:00
Nick Hibma
8c895d718b Major synchronisation with the NetBSD USB stack:
- Some cleanup and improvements in the uhci and ohci drivers
- Support for plugging and unplugging devices improved
- Now available is bulk transport over OHCI controllers
- Resume and suspend have been temporarily been disabled again.  Proper
  support for it is available in the uhci.c and ohci.c files but I have
  not yet spent the brain cycles to use it.
- OpenBSD now uses the USB stack as well
- Add FreeBSD tags
1999-10-07 19:26:38 +00:00
Nick Hibma
7e8893c9b4 Update the list of devices from NetBSD 1999-08-28 09:39:54 +00:00
Nick Hibma
235dddd4ea Textual changes 1999-01-22 00:51:12 +00:00
Nick Hibma
53809e8652 Sync with NetBSD sources. Almost there. Mostly style fixes. 1999-01-10 18:42:54 +00:00
Nick Hibma
a73f7cf01f Major synchronisation with NetBSD USB code 1999-01-07 23:07:57 +00:00
Nick Hibma
6fef2c2c27 Added Id to all files 1998-12-14 09:32:25 +00:00
Nick Hibma
3e041e6116 Updated USB kernel sources to NetBSD sources of 1998-12-09.
1 bug fix and several textual changes.
Preparing to feed back changes for port into NetBSD to create one source base.
1998-12-13 22:27:42 +00:00
Nick Hibma
0cec007c5f Initial commit of ported NetBSD USB stack 1998-11-26 23:13:13 +00:00