Commit Graph

1560 Commits

Author SHA1 Message Date
John Baldwin
636a309adb Use %t (ptrdiff_t modifier) to print a couple of pointer differences rather
than casting them to int.
2005-12-15 21:57:32 +00:00
Florent Thoumie
17e41731b7 - Rename UQ_BROKEN_IPOD to UQ_NO_OPEN_CLEARSTALL since it's likely to be used
by more devices than iPods.

Proposed by:	iedowse
Approved by:	ssouhlal
MFC after:	3 days
2005-12-11 20:14:38 +00:00
Ian Dowse
2b58bea7c0 Reorder the calling of the completion callback and the transfer
"done" method so that for non-repeat operations we have completely
finished with the transfer by the time the callback is invoked.
This makes it possible to recycle a transfer from within the callback
routine for the same transfer. Previously this almost worked, but
with OHCI controllers calling the "done" method after the callback
would zero out some important fields needed by the recycled transfer.
Only some usb peripheral drivers such as ucom appear to rely on the
ability to reuse a transfer from its callback.

MFC after:	1 week
2005-12-08 03:08:17 +00:00
Florent Thoumie
645cf3805a - Add Product IDs for iPod 3G and iPod Video.
- Add an USB quirk for iPods, da(4) devices are now successfully created.

Approved by:	ssouhlal
MFC after:	1 week
2005-12-05 01:51:28 +00:00
Ruslan Ermilov
3238c6bd33 Fix -Wundef from compiling the amd64 LINT. 2005-12-04 10:06:06 +00:00
Bruce A. Mah
71ddfdfb45 Recognize the Sony Clie PEG-TJ37.
Tested on:	My PEG-TJ37 and my RELENG_6 workstation
MFC after:	1 week
2005-12-04 07:34:19 +00:00
Damien Bergamini
5a69e86294 Tell Rx radiotap that hardware leaves FCS at the end of the frame.
Obtained from:	NetBSD (drochner@)
2005-11-29 21:36:15 +00:00
Damien Bergamini
635df8de16 Use usbd_clear_endpoint_stall_async() instead of usbd_clear_endpoint_stall()
in Tx/Rx callbacks.

Obtained from:	NetBSD
2005-11-29 21:07:32 +00:00
Damien Bergamini
3d5dc80e4d o Send management frames at the lowest possible rate.
o Include rate in the Rx radiotap code.
o Fix RSSI value in the Rx path.
o Minor tweaks.
2005-11-29 20:55:53 +00:00
Ian Dowse
d63700b023 The ohci driver's processing of completed transfer descriptors (TDs)
appeared to rely on all kinds of non-guaranteed behaviours: the
transfer abort code assumed that TDs with no interrupt timeout
configured would end up on the done queue within 20ms, the done
queue processing assumed that all TDs from a transfer would appear
at the same time, and there were access-after-free bugs triggered
on failed transfers.

Attempt to fix these problems by the following changes:
 - Use a maximum (6-frame) interrupt delay instead of no interrupt
   delay to ensure that the 20ms wait in ohci_abort_xfer() is enough
   for the TDs to have been taken off the hardware done queue.
 - Defer cancellation of timeouts and freeing of TDs until we either
   hit an error or reach the final TD.
 - Remove TDs from the done queue before freeing them so that it
   is safe to continue traversing the done queue.

This appears to fix a hang that was reproducable with revision 1.67
or 1.68 of ulpt.c (earlier revisions had a different transfer
pattern). With certain HP printers, the command "true > /dev/ulpt0"
would cause ohci_add_done() to spin because the done queue had a
loop. The list corruption was caused by a 3-TD transfer where the
first TD completed but remained on the internal host controller
done queue because it had no interrupt timeout. When the transfer
timed out, the TD got freed and reused, so it caused a loop in the
done queue when it was inserted a second time from a different
transfer.

Reported by:	Alex Pivovarov
MFC after:	1 week
2005-11-27 09:05:37 +00:00
Ian Dowse
c20e7ce621 Revision 5.0 of the Sony DSC camera appears to require RBC commands
to be padded to 12 bytes in length. Otherwise the requests just
time out.

Reported by:	anders
MFC after:	1 week
2005-11-26 17:11:31 +00:00
Damien Bergamini
26664f807c o Pass received frames to radiotap.
o Remove some unsupported flags from the ic_caps field.
o Various cosmetic tweaks.

MFC after:	6 days
2005-11-25 21:15:07 +00:00
Damien Bergamini
38e00d27ea Fix AMRR initialization.
MFC after:	6 days
2005-11-25 19:32:29 +00:00
Damien Bergamini
f850597399 Send the packet to BPF after setting the duration field of the frame.
MFC after:	1 week
2005-11-24 21:40:24 +00:00
Damien Bergamini
08403499e7 o Force the sending of an extra URB if there is less than 2 bytes left
at the end of the last URB (URB = USB Request Block = 64 bytes).
o Free the AMRR reserved xfer in detach.
o Minor tweaks.

MFC after:	1 week
2005-11-24 21:31:39 +00:00
Damien Bergamini
8ea9781eed Optimize PLCP length field computation for 802.11b rates. 2005-11-23 17:32:57 +00:00
Damien Bergamini
72bae85020 Minor tweaks. 2005-11-19 15:08:05 +00:00
Damien Bergamini
8403bb96a2 Second part of the AMRR commit.
Enable automatic rate adaptation in BSS operating mode.
Works great here.  Will need a lot of testing though.
2005-11-18 21:37:02 +00:00
Damien Bergamini
903c939fd5 Add some initial bits (currently unused) for upcoming AMRR support.
AMRR = Adaptive Multi Rate Retry algorithm
More information: http://www-sop.inria.fr/rapports/sophia/RR-5208.html

More to come.
2005-11-15 17:58:16 +00:00
Damien Bergamini
8fe21ac40a Add some initial bits (currently unused) for upcoming AMRR support.
AMRR = Adaptive Multi Rate Retry algorithm
More information: http://www-sop.inria.fr/rapports/sophia/RR-5208.html
2005-11-15 17:48:49 +00:00
Damien Bergamini
43b60fd47d Optimize and clean TX time computation.
Avoid a test and a modulus operation.

MFC after:	2 weeks
2005-11-15 17:17:15 +00:00
Damien Bergamini
ba1362c549 Be more robust when handling Rx interrupts. If we can't allocate a new mbuf,
just discard the received frame and reuse the old mbuf.
This should prevent the connection from stalling after high network traffic.

MFC after:	2 weeks
2005-11-13 17:25:21 +00:00
Ian Dowse
a60c16ad2f Fix a > 1 year old typo that caused the ulpt driver to try reading
from the printer and discarding the data even if the ulpt device
was opened for reading. This resulted in crashes because two
conconcurrent read transfers were using the same transfer structure.

PR:		usb/88886
Reported By:	Alex Pivovarov
MFC after:	1 week
2005-11-12 17:39:31 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Bernd Walter
39283b0b4b Remove spl.
Restart request on USBD_IOERROR.

MFC after:	2 weeks
2005-11-05 17:17:57 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
Poul-Henning Kamp
733634738e Eliminate two unused arguments to ttycreate(). 2005-10-16 20:22:56 +00:00
Hajimu UMEMOTO
9fa7087a67 add product ID for Linux Ethernet/RNDIS gadget on pxa210/25x/26x.
Submitted by:	Keiichi SHIMA <keiichi__at__iijlab.net>
MFC after:	2 days
2005-09-28 19:41:25 +00:00
Maxim Sobolev
b4a98d309e Add dummy support for ifmedia subsystem. This allows devd to see cdce as an
ethernet device and configure IP etc.

Submitted by:	Craig Boston <craig@tobuj.gank.org>
2005-09-26 05:29:46 +00:00
Alexander Leidinger
16f309f0e2 This part of the struct isn't needed on FreeBSD:
---snip---
FYI this bit isn't needed for FreeBSD - I think it came from either
OpenBSD or NetBSD where arc4random() wasn't available during cold
boot.
---snip---

Explained by:	iedowse
2005-09-24 14:49:36 +00:00
Warner Losh
c82f53f61d 'PC Card' instead of other variants 2005-09-22 06:01:44 +00:00
Warner Losh
a6869ccad0 Remove OLDCARD shims 2005-09-22 05:06:37 +00:00
Damien Bergamini
e26a9b9fff The "SMC EZ Connect SMC2862W-G" product is not based on the Ralink RT2500USB
chipset.

MFC after:	5 days
2005-09-19 18:19:22 +00:00
Alexander Leidinger
d4c4f2c099 ehcivar.h:
Synchronise with NetBSD upto rev 1.19:
		- Allow 32 chars in the saved vendor string.
		- Some NetBSD-only changes.
		- Some missing parts (define, variable).

ehci_pci.c:
	Add vendor ids for ATI and Philips.

	Add identification strings for the following:
		o ALi's M5239
		o AMD 8111
		o ATI SB200, SB400
		o Intel 6300ESB, ICH4, ICH5, ICH7
		o NVIDIA nForce 2, nForce 3, nForce 4
		o Philips ISP156x

ehcireg.h:
	We're at the same level as rev 1.18 from NetBSD.

usb_port.h:
	NetBSD/OpenBSD specific things

Obtained from:		NetBSD via DragonFly
No comment from:	usb@
2005-09-18 11:45:39 +00:00
Ruslan Ermilov
4180ad4d15 Add missing mtx_destroy() when if_alloc() fails.
Add missing if_free() when mii_phy_probe() fails.
Put if_free() into the correct #ifdef in detach().
2005-09-16 09:20:58 +00:00
Ruslan Ermilov
94a7d18b08 Add missing if_free() in rue_detach(). 2005-09-16 09:16:46 +00:00
David E. O'Brien
c679d15b66 Note that Keyspan is also InnoSys Inc. 2005-09-12 03:32:46 +00:00
Ian Dowse
f1129b105e Provide the USB device release number along with other parameters
so that devd can match on it. This field was already available to
usbd and is used by a number of usbd.conf entries, so now it is
possible to transfer those entries to devd.conf.

Submitted by:	Anish Mistry
2005-08-23 21:32:49 +00:00
Damien Bergamini
30feefb1d2 Fix basic rates set for 802.11a/g operating modes. This can significantly
improve transfer rates in 802.11a/g.  Fix IFS settings in ral(4) too.

MFC after:	6 days
2005-08-21 14:16:20 +00:00
Damien Bergamini
e0454c269b Don't automatically start scanning in if_init() if IEEE80211_ROAMING_MANUAL
flag is set.

MFC after:	1 week
2005-08-20 14:28:37 +00:00
Sam Leffler
b5c9941514 Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
  channel instead of overloading ic->ic_bss->ni_chan (or in some
  drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
  state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
  more like a scan cache--look for an existing entry before adding
  a new one; this combined with ic_curchan use corrects handling of
  stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
  a new ieee80211_add_neighbor routine

Reviewed by:	avatar
Tested by:	avatar, Michal Mertl
MFC after:	2 weeks
2005-08-10 16:22:30 +00:00
David E. O'Brien
fba19691c7 Add proper copyright attribution. 2005-08-10 03:54:37 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Ian Dowse
16a0ad03b8 Fix two bugs that interacted to cause page faults in softclock()
when using mice containing a tilt movement: there was a missing
usb_callout_init() for the UMS_SPUR_BUT_UP quirk code, and UMS_T
was defined to the same flag value as UMS_SPUR_BUT_UP.

Reported by:	flz
MFC after:	3 days
2005-08-04 02:21:37 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Sam Leffler
2c39b32c94 diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 16:50:18 +00:00
Xin LI
f467e51eba PLAY_MSF, PLAY_TRACK, PLAY_TRACK_REL, PAUSE, PLAY_12 commands to pass
through umass(4), in order to make cdcontrol(1) to issue commands to
a USB CD driver.

The command IDs were obtained from the CAM subsystem.  This was tested
on half dozen of USB CD drivers from different vendors.

Suggested by:	"intron" <intron at intron dot ac>
PR:		usb/83439
Reviewed by:	sanpei
MFC After:	1 week
2005-07-19 05:18:23 +00:00
Warner Losh
f83fe7ce90 Don't wait for the printer to become ready before allowing the open to
succeed.  There are many printers that return status over the read
channel, and if we wait for the status to become ready, then we can't
find the status automatically.  Linux doesn't wait, nor does it ever
seem to really check the status in any meaningful way...  If there
really is a problem, the writes to the bulk out endpoint will still
fail (like they would if the printer was ready and then ran out of
paper or became unready).

In addition, there are a number of printers being made that emulate
the 'status' byte by returning '0' always rather than '0x18'.  This
fixes the EBUSY on open timeouts on those printer as well.

Reviewed by: the defining silence on usb@
2005-07-15 04:19:42 +00:00
Takanori Watanabe
39e5901ee7 Add SL811 based host controller driver for CF usb host controller.
This is based on NetBSD slhci(4) driver for X68k amateur hardware.
For now, it will not work properly, but it can detect usb device
insertion.
2005-07-14 15:57:01 +00:00
Takanori Watanabe
05cb19d7c2 Prepare to commit SL811 based Host controller driver. 2005-07-14 14:19:05 +00:00