- Use '\0' for a char instead of NULL.
- Explicitly compare against the global `nullstring' to determine if
a non-NULL uaddr is not malloc'd.
- Remove some unnecessary casting of the argument to free().
- In rpcbproc_callit_com(), move the freeing of m_uaddr to the
cleanup code at the end of the function.
- To avoid confusion and possible alignment problems, change
netbufdup() to allocate the netbuf struct and the sockaddr buffer
separately, and change netbuffree() accordingly. This makes it
produce netbufs that are consistent with all other netbufs in
rpcbind.
comparing bit by bit.
Make the logic in in6_fillscopeid() match that in our ifconfig(8):
only set the scope ID if there is one in the address and none in
sin6_scope_id.
Correct a comment in network_init() that didn't make sense; it was
probably never updated after it was pasted from similar code in
addrmerge().
stealth hints loading. 'make release' has been fixed to not need this
now anyway. If you want static hints, specify it explicitly.
Hey! Why did it suddenly get so dark??
getopt(3) (and can't be converted without breaking compatibility), and
it's very irritating to have it silently DTWT if one combines options
together (e.g., "-msS domain,server").
to be included into this one. This works the same way as #include
does in C; as far as the user is concerned, the included file is
inlined into the current one.
Since config(8) is no longer limited to working on one user-supplied
file, printing just a line number in an error message is not
sufficient. The new global variable yyfile represents the file
currently being parsed, and must be printed as well.
Reviewed by: imp
Obtained from: OpenBSD
until a 20ms select(2) timeout occurs, but if there is a continuous
stream of movement events, button events can be delayed indefinitely
because the select never has to wait long enough for a timeout.
The delay and mouse event reordering that result are very noticable
and sometimes quite frustrating when dragging windows etc. in X.
Add a simple mechanism that avoids this re-ordering. While a button
event is deferred, we discard up to 3 movement events to allow for
mouse jitter. If more movement events occur, then we immediately
timeout the deferred button event and let the movement proceed.
This change only affects the 3-button emulation case.
perform a key change, *and* our sequence numbers have wrapped,
ensure that the number of key changes is calculated correctly.
The previous code counted down from a negative number to zero,
re-encrypting the current key on each iteration - this took some
time and strangely enough got the answer wrong !!!
Fix a(nother) spelling mistake while I'm there.
Use -tag list in the FILES section to work around the bug
when .Pa font is not restored to its original value if one
of the -hang, -ohang, or -inset lists is used in the FILES
section. (The fix for the bug has just been submitted to
the GNU Groff maintainers.)
Also, fixed the Handbook reference in the SEE ALSO.
reading variable sized blocks of data every second. This should be
more efficient.
Suggested & tested by: se
* Add a syntax for excluding CD-ROM drives etc.
Suggested by: des, se, many others...
Manual page updates coming soon.
envoked -- don't use them (as return values from open()), then
(say) close(STDIN_FILENO) when daemonising.
This is done by grabbing 3 descriptors to /dev/null at startup and
releasing them after we've daemonised.
MFC after: 1 week
This is necessary because MPPE will combine the protocol id with the
payload received on the tun interface, encrypt it, then prepend its
own protocol id, effectively increasing the payload by two bytes.
backslash as nothing, treat it like a space so that adjacent lines
aren't glued together.
PR: 8479
Submitted by: Adrian Filipi-Martin <adrian@ubergeeks.com>
give a bit more information about up to 10 errors encountered during
formatting (unless -q has been specified, of course).
While being here, removed a bitrotten comment in the Makefile, and
kill the old Emacs local variable stuff at the end of fdformat.c
that's no longer useful anway.
names suggest, they perform methods on Device's. In addition, they
check that the pointer passed to them is valid; if it isn't, they
pretend that the action failed. This fixes some crashes due to NULL
dereferences (e.g., PR 26509).
Approved by: jkh (some time ago)
avoid blasting the syslog with error messages from bad floppies. Both
tools have their own error reporting anyway (which could easily be
cluttered by the syslog output on your terminal).
one to see what files would be removed *if* an 'lpc clean' is done. 'tclean'
will remove no files, and is therefore not a privileged command. Also, both
'lpc clean' and 'lpc tclean' will now look for 'core' files in spool directories
(but not remove them). They also print out an extra line of info when a
datafile to be removed is a symlink (from 'lpr -s'), saying what file it is
a symlink to.
The 'lpc clean' commands also now print out a summary line saying how many
queues were checked, how many files were removed (or "would be" removed, for
tclean), and how much disk space is involved. For the benefit of those who
have many print queues, 'lpc clean all' will only print out the names of print
queues where some "interesting" files were found, instead of printing out a
header-line for every queue in your printcap file.
Reviewed by: freebsd-print@bostonradio.orgfreebsd-audit@FreeBSD.org
MFC after: 2 weeks
while -w allows connection from non-reserved ports. Also improves the
helpfulness of various connection-error messages.
The changes for IPv6 added back in the reserved-port check which was mistakenly
dropped from lpd in 1997 (copying a change from openbsd). It is best to have
that check in place, but the check breaks lpr's from some implementations of
lpr/lpd for Windows. The -w option is for those admins who need to accept
jobs from non-reserved ports, the -c option is for admins who would like a
print-server machine to log all failed connection-attempts to syslog.
Reviewed by: freebsd-audit@FreeBSD.orgfreebsd-print@bostonradio.org
MFC after: 2 weeks
contained a number of memory leaks. The changes include:
- Add a comment describing what addrmerge() does.
- Deal with 0.0.0.0./::. or AF_LOCAL callers correctly.
- Use rpcbind_get_conf() instead of getnetconfigent() so we don't
have to remember to free the returned netconfig struct.
- Make just one pass through the ifaddrs list; we can pick up a fallback
interface address in the same pass as the netmask comparison.
- Define and use SA2SIN* macros to avoid the need for loads of
protocol-specific local variables.
- Use mostly protocol-independent code for building the netbuf version
of the address to be returned.
- Use the common cleanup code for virtually all error and non-error
cases, fixing a number of memory leaks.
function has a return type of u_int32_t, into which it was somehow
supposed to encode:
* A valid 32-bit XID (which could be any value including 0).
* 0, meaning a duplicate request.
* -1, meaning a malloc failed (!);
We now ensure that all XIDs are non-zero, and pass the XID out via
a pointer argument.
In forward_find() and free_slot_by_xid(), remove an unnecessary
and confusing test for a negative result from an unsigned modulo
operation, but add an unnecessary cast to highlight why.
itself verbatim from INDEX. This fixes seg. faults with newer INDEX
files which have some gnome ports with outrageously long run deps.
Approved by: jkh
exist, and therefore mm_install is returning the "fail" value of
the test instead of the "success" value for install.
This change is a no-op on HEAD, but since the only harm on RELENG_4
ATM is a spurious warning it can follow the usual MFC practice.
Submitted by: A cast of thousands :-/
encryption compatibility with Windows 2000. Stateful encryption
uses less CPU but is bad on lossy transports.
The ``set mppe'' command has been expanded. If it's used with any
arguments, ppp will insist on encryption, closing LCP if the other
end refuses.
Unfortunately, Microsoft have abused the CCP reset request so that
receiving a reset request does not result in a reset ack when using
MPPE...
Sponsored by: Monzoon Networks AG and FreeBSD Services Limited
allow MRU/MTU negotiations to exceed 1492.
Add an optional ``max'' specifier to ``set m[rt]u'', ie.
set mtu max 1480
Bump the ppp version number.
Sponsored by: Monzoon Networks AG and FreeBSD Services Limited
sends error messages to stderr, normal output to stdout, instead of
logging everything via syslog.
Turn off the FORMAT_AUDIT in the Makefile, until I can figure out how
to disable the check for one single line in the source :(
Reviewed by: dd, silence on -audit
MFC after: 1 month
how to use this feature are in the man page. This is based on work
by Lyndon Nerenberg.
(The only difficult part about this patch is the fact that you
can't fchown a unix domain socket, which means the sockets must be
put in a secure directory).
Reviewed by: dillon
more sensible/understandable. 'from'->'from_host' 'host'->'local_host'
'fromb'->'frombuf' 'fromhost'->'origin_host' and a local-variable
named 'host'->'hostbuf'. This fixes some compile-time warnings about
local variables shadowing global variables.
Other than renaming variables, the only actual code changes are to call
strlcpy() instead of strncpy() when setting those (renamed) variables,
and that 'from_ip' is now a strdup()-created buffer instead of being a
static buffer compiled in as 1025 bytes.
Reviewed by: freebsd-print@bostonradio.org (an earlier version)
MFC after: 1 week
warnings which come up for various routines that have a parameter which
is also called 'name'.
Reviewed by: freebsd-print@bostonradio.org
MFC after: 1 week
(e.g., on alphas, or even on i386's with a POSIX-200x-conformant
ntohl() (ntohl() returns uint32_t which is u_int on i386's)).
Fixed related bugs and bogons while I'm here:
- ntohl() was "fixed" for printing in 1 place by casting to
"(unsigned int )". This breaks the value on systems where u_int
is smaller than uint32_t, and has 2 style bugs.
- spell u_int consistently (never use "unsigned").
- break K&R support some more (don't cast malloc()'s arg to a wrong
type...).
