USPACE_SVC_STACK_TOP, USPACE_SVC_STACK_BOTTOM, USPACE_UNDEF_STACK_TOP,
and USPACE_UNDEF_STACK_BOTTOM look wrong to me, so I'm leaving them
alone.
Reviewed by: arch@
mp_machdep.c was using UAREA_PAGES to allocate something that isn't a
U area, and that there seems to be an implicit assumption that the PCB
is just past the end of the kernel stack.
Reviewed by: arch@
to us was to help out the Linux port, but really just invited overflow.
In fact, the request sense timer was overflowing prior to this change making
it much shorter than intended.
aic_osm_lib.h:
Be more careful about overflow in all timer/timeout primitives.
from divert sockets.
- Remove div_disconnect() method, since it shouldn't be called now.
- Remove div_abort() method. It was never called directly, since protocol
doesn't have listen queue. It was called only from div_disconnect(),
which is removed now.
Reviewed by: rwatson, maxim
Approved by: julian (mentor)
MT5 after: 1 week
MT4 after: 1 month
setting the B_REMFREE flag in the buf. This is done to prevent lock order
reversals with code that must call bremfree() with a local lock held.
This also reduces overhead by removing two lock operations per buf for
fsync() and similar.
- Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock
has been acquired so that we may remove ourself from the free-list.
- Provide a bremfreef() function to immediately remove a buf from a
free-list for use only by NFS. This is done because the nfsclient code
overloads the b_freelist queue for its own async. io queue.
- Simplify the numfreebuffers accounting by removing a switch statement
that executed the same code in every possible case.
- getnewbuf() can encounter locked bufs on free-lists once Giant is removed.
Remove a panic associated with this condition and delay asserts that
inspect the buf until after it is locked.
Reviewed by: phk
Sponsored by: Isilon Systems, Inc.
to request from devices during the "long inquiry" portion of our probe.
This same bug was fixed in the 4.x stream a few years ago, but the fix
was never propogated to -current.
This fix is slightly different than in -stable:
o Use offsetof() instead of a hard coded constant so as the make
the code more self-explainatory.
o Round odd long inquiry lengths up so as to avoid tickling ignore
wide residue bugs in broken parallel SCSI devices running with a
wide transfer negotiation.
MFC: 3 days
after allowing more than one address with the same prefix.
Reported by: Vladimir Grebenschikov <vova NO fbsd SPAM ru>
Submitted by: ru (also NetBSD rev. 1.83)
Pointyhat to: mlaier
queue a packet to the hardware... instead of when the hardware queue is
empty..
don't initalize cur_tx now that it doesn't need to be...
Pointed out by: bde
clock found on the ISA bus (some USIIe, USIIi and USIIIi models) and
EBus (USIII models) instead of a MK48Txx clock.
Testet by: Matthew T. Lager" <freebsd@trinetworks.com> on Sun Fire V100,
Xavier Beaudouin <kiwi@oav.net> on Netra X1 (initial version)
respective NetBSD driver for use with the genclock interface.
It's first use will be on sparc64 but it was also tested on alpha with
a preliminary patch to switch alpha to use the genclock code together
with this driver instead of the respective code in alpha/alpha/clock.c
and the rather MD mcclock(4). Using it on i386 and amd64 won't be that
hard but some changes/extensions to improve the genclock code in general
should be done first, e.g. add locking and make it easier to access the
NVRAM usually coupled with RTCs.
- The claim in the commit log of rev. 1.11 of dev/uart/uart_cpu_sparc64.c
etc. that UARTs are the only relevant ISA devices on sparc64 turned out
to be false. While there are sparc64 models where UARTs are the only
devices on the ISA bus there are in fact also low-cost models where all
devices traditionally found on the EBus are hooked up to the ISA bus.
There are also models that use a mix between EBus and ISA devices with
things like an AT keyboard controller and other rather interesting
devices that we might want to support in the futute hook up to the ISA
bus.
In order to not need to add sparc64 specific device_identify methods to
all of the respective ISA drivers and also not add OFW specific code to
the common ISA code make the sparc64 ISA bus code fake up PnP devices so
most ISA drivers probe their devices without further changes.
Unfortunately Sun doesn't adhere to the ISA bindings defined in IEEE
1275-1994 for the properties of most of the ISA devices which would
allow to obtain the vendor and logical IDs from their properties. So we
we just use a simple table which maps the name properties to PnP IDs.
This could be done in a more sophisticated way but I courrently don't
see the need for this. [1]
- Add the children with fully mapped and specified resources (in the OFW
sense) similar to what is done in the EBus code for the IRQ resources
of the children as adjusting the resources and the resource list entries
respectively in isa_alloc_resource() as done perviously causes trouble
with drivers which use rman_get_start(), pass-through or allocate and
release resources multiple times, etc.
Adjusting the resources might be better off in a bus_activate_resource
method but the common ISA code currently doesn't allow for an
isa_activate_resource(). [2]
With this change:
- ppbus(4) and lpt(4) attach and work (modulo ECP mode, which requires
real ISADMA code but it currently only consists of stubs on sparc64).
- atkbdc(4) and atkbdc(4) attach, no further testing done.
- fdc(4) itself attaches but causes a hang while attaching fd0 also
when is DMA disabled, further work in fdc(4) is required here as e.g.
fd0 uses the address of fd1 on sparc64 (not sure if sparc64 supports
more than one floppy drive at all).
All of these drivers previously caused panics in the sparc64 ISA code.
- Minor changes, e.g. use __FBSDID, remove a dupe word in a comment and
declare one global variable which isn't used outside of isa.c static.
o dev/uart/uart_cpu_sparc64.c and modules/uart/Makefile:
- Remove the code for registering the UARTs on the ISA bus from the
sparc64 uart_cpu_identify() again and rely on probing them via PnP.
Original idea by: tmm [1]
No objections by: tmm [1], [2]
away, instead only exit storming mode when an interrupt stops firing long
enough for the ithread to exit the loop and go back to sleep.
Tested by: macrus (cruder version)
MAC policies to perform object life cycle operations and access
control checks.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, SPAWAR, McAfee Research
message queues, shared memory segments, and semaphores), add a struct
label pointer, which will hold the MAC labels for the objects. As a
result of recent work to separate kernel and user space ABIs, this
should not break the ABI for applications using System V IPC, but will
require a rebuild of the ipcs monitoring tool.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, SPAWAR, McAfee Research
objects and operations:
- System V IPC message, message queue, semaphore, and shared memory
segment init, destroy, cleanup, create operations.
- System V IPC message, message queue, seamphore, and shared memory
segment access control entry points, including rights to attach,
destroy, and manipulate these IPC objects.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, SPAWAR, McAfee Research
