Commit Graph

265 Commits

Author SHA1 Message Date
Konstantin Belousov
d6e029adbe In r197963, a race with thread being selected for signal delivery
while in kernel mode, and later changing signal mask to block the
signal, was fixed for sigprocmask(2) and ptread_exit(3). The same race
exists for sigreturn(2), setcontext(2) and swapcontext(2) syscalls.

Use kern_sigprocmask() instead of direct manipulation of td_sigmask to
reschedule newly blocked signals, closing the race.

Reviewed by:	davidxu
Tested by:	pho
MFC after:	1 month
2009-10-27 10:47:58 +00:00
Marcel Moolenaar
1a4fcaebe3 o Introduce vm_sync_icache() for making the I-cache coherent with
the memory or D-cache, depending on the semantics of the platform.
    vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
    that translates the vm_map_t argumument to pmap_t.
o   Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
    it replaces the pmap_page_executable() function, added to solve
    the I-cache problem in uiomove_fromphys().
o   In proc_rwmem() call vm_sync_icache() when writing to a page that
    has execute permissions. This assures that when breakpoints are
    written, the I-cache will be coherent and the process will actually
    hit the breakpoint.
o   This also fixes the Book-E PMAP implementation that was missing
    necessary locking while trying to deal with the I-cache coherency
    in pmap_enter() (read: mmu_booke_enter_locked).

The key property of this change is that the I-cache is made coherent
*after* writes have been done. Doing it in the PMAP layer when adding
or changing a mapping means that the I-cache is made coherent *before*
any writes happen. The difference is key when the I-cache prefetches.
2009-10-21 18:38:02 +00:00
Marius Strobl
a430b967b5 Change the load base to below 2GB so PIE binaries work including when
compiled to use the Medium/Low code model, which we currently default
to for the userland. GNU/Linux has moved their default to Medium/Middle
some time ago, which probably explains why the current GNU ld(1) uses
a base in the range between 32 and 44 bits instead.

Submitted by:	kib
2009-10-18 13:08:15 +00:00
Konstantin Belousov
023063938a Define architectural load bases for PIE binaries. Addresses were selected
by looking at the bases used for non-relocatable executables by gnu ld(1),
and adjusting it slightly.

Discussed with:	bz
Reviewed by:	kan
Tested by:	bz (i386, amd64), bsam (linux)
MFC after:	some time
2009-10-10 15:31:24 +00:00
Alan Cox
fe105d45a2 Add a new sysctl for reporting all of the supported page sizes.
Reviewed by:	jhb
MFC after:	3 weeks
2009-09-18 17:04:57 +00:00
Poul-Henning Kamp
a254d1f16d Get rid of the _NO_NAMESPACE_POLLUTION kludge by creating an
architecture specific include file containing the _ALIGN*
stuff which <sys/socket.h> needs.
2009-09-08 20:45:40 +00:00
Attilio Rao
dc6fbf6545 * Completely Remove the option STOP_NMI from the kernel. This option
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions.  This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding

This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.

Please don't forget to update your config file with the STOP_NMI
option removal

Reviewed by:	jhb
Tested by:	pho, bz, rink
Approved by:	re (kib)
2009-08-13 17:09:45 +00:00
Alan Cox
bc5c48f12f Correct an error of omission in r195649 ("Add support to the virtual memory
system for configuring machine-dependent memory attributes: ...").  In
r195649, the "vm_cache_mode_t/vm_memattr_t" parameter was removed from
vm_phys_alloc_contig().

Approved by:	re (kensmith)
2009-07-13 18:11:59 +00:00
Alan Cox
3153e878dd Add support to the virtual memory system for configuring machine-
dependent memory attributes:

Rename vm_cache_mode_t to vm_memattr_t.  The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.

Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.

Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes.  Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures.  The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map.  The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:

  kmem_alloc_contig() can now be used to allocate kernel memory with
  non-default memory attributes on amd64 and i386.

  vm_page_alloc() and the device pager will set the memory attributes
  for the real or fictitious page according to the object's default
  memory attributes.

Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.

Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386.  In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.

In collaboration with: jhb

Approved by:	re (kib)
2009-07-12 23:31:20 +00:00
Marcel Moolenaar
31d22003dd Rename option USBVERBOSE to USB_VERBOSE for 2 reasons:
1.  USB_VERBOSE is more consistent with USB_DEBUG,
2.  sys/dev/usb/usb_device.c uses option USB_VERBOSE and
    not USBVERBOSE.

POLA with the USBVERBOSE option as it's found in 7-STABLE
has been considered but found insignificant in the face
of the USB stack overhaul.

Approved by:	re (kensmith)
2009-07-12 04:48:47 +00:00
Sam Leffler
8c393fd1f0 Cleanup ALIGNED_POINTER:
o add to platforms where it was missing (arm, i386, powerpc, sparc64, sun4v)
o define as "1" on amd64 and i386 where there is no restriction
o make the type returned consistent with ALIGN
o remove _ALIGNED_POINTER
o make associated comments consistent

Reviewed by:	bde, imp, marcel
Approved by:	re (kensmith)
2009-07-05 17:45:48 +00:00
Ed Schouten
89fe4c0a2b Enable POSIX semaphores on all non-embedded architectures by default.
More applications (including Firefox) seem to depend on this nowadays,
so not having this enabled by default is a bad idea.

Proposed by:	miwi
Patch by:	Florian Smeets <flo kasimir com>
Approved by:	re (kib)
2009-07-02 18:24:37 +00:00
Alan Cox
5797795f5a Correct the #endif comment.
Noticed by:	jmallett
Approved by:	re (kib)
2009-06-26 16:22:24 +00:00
Alan Cox
e999111ae7 This change is the next step in implementing the cache control functionality
required by video card drivers.  Specifically, this change introduces
vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all
architectures.  In addition, this changes adds a vm_cache_mode_t parameter
to kmem_alloc_contig() and vm_phys_alloc_contig().  These will be the
interfaces for allocating mapped kernel memory and physical memory,
respectively, with non-default cache modes.

In collaboration with:	jhb
2009-06-26 04:47:43 +00:00
Ed Schouten
91292be73f Remove COMPAT_43 from sun4v's GENERIC.
I think it's very unlikely that we have binaries for sun4v that use
features provided by COMPAT_43. Remove it from GENERIC.

Approved by:	kib
2009-06-25 19:26:23 +00:00
John Baldwin
14b99236f1 Remove COMPAT_FREEBSD5 from sun4v. There are no FreeBSD/sun4v 5.x binaries
to be compatible with.
2009-06-25 17:46:52 +00:00
Jeff Roberson
50c202c592 Implement a facility for dynamic per-cpu variables.
- Modules and kernel code alike may use DPCPU_DEFINE(),
   DPCPU_GET(), DPCPU_SET(), etc. akin to the statically defined
   PCPU_*.  Requires only one extra instruction more than PCPU_* and is
   virtually the same as __thread for builtin and much faster for shared
   objects.  DPCPU variables can be initialized when defined.
 - Modules are supported by relocating the module's per-cpu linker set
   over space reserved in the kernel.  Modules may fail to load if there
   is insufficient space available.
 - Track space available for modules with a one-off extent allocator.
   Free may block for memory to allocate space for an extent.

Reviewed by:    jhb, rwatson, kan, sam, grehan, marius, marcel, stas
2009-06-23 22:42:39 +00:00
Marius Strobl
506a380d0f Adjust the padding of struct pcpu to r193219.
Submitted by:	Eygene Ryabinkin
2009-06-03 19:31:26 +00:00
Robert Watson
bd875f5f13 Remove MAC kernel config files and add "options MAC" to GENERIC, with the
goal of shipping 8.0 with MAC support in the default kernel.  No policies
will be compiled in or enabled by default, but it will now be possible to
load them at boot or runtime without a kernel recompile.

While the framework is not believed to impose measurable overhead when no
policies are loaded (a result of optimization over the past few months in
HEAD), we'll continue to benchmark and optimize as the release approaches.
Please keep an eye out for performance or functionality regressions that
could be a result of this change.

Approved by:	re (kensmith)
Obtained from:	TrustedBSD Project
2009-06-02 18:31:08 +00:00
Jamie Gritton
76ca6f88da Place hostnames and similar information fully under the prison system.
The system hostname is now stored in prison0, and the global variable
"hostname" has been removed, as has the hostname_mtx mutex.  Jails may
have their own host information, or they may inherit it from the
parent/system.  The proper way to read the hostname is via
getcredhostname(), which will copy either the hostname associated with
the passed cred, or the system hostname if you pass NULL.  The system
hostname can still be accessed directly (and without locking) at
prison0.pr_host, but that should be avoided where possible.

The "similar information" referred to is domainname, hostid, and
hostuuid, which have also become prison parameters and had their
associated global variables removed.

Approved by:	bz (mentor)
2009-05-29 21:27:12 +00:00
Ed Schouten
c5e30cc02b Last minute TTY API change: remove mutex argument from tty_alloc().
I don't want people to override the mutex when allocating a TTY. It has
to be there, to keep drivers like syscons happy. So I'm creating a
tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex()
should eventually be removed.

The advantage of this approach, is that we can just remove a function,
without breaking the regular API in the future.
2009-05-29 06:41:23 +00:00
Marcel Moolenaar
dbb95048da Add cpu_flush_dcache() for use after non-DMA based I/O so that a
possible future I-cache coherency operation can succeed. On ARM
for example the L1 cache can be (is) virtually mapped, which
means that any I/O that uses temporary mappings will not see the
I-cache made coherent. On ia64 a similar behaviour has been
observed. By flushing the D-cache, execution of binaries backed
by md(4) and/or NFS work reliably.
For Book-E (powerpc), execution over NFS exhibits SIGILL once in
a while as well, though cpu_flush_dcache() hasn't been implemented
yet.

Doing an explicit D-cache flush as part of the non-DMA based I/O
read operation eliminates the need to do it as part of the
I-cache coherency operation itself and as such avoids pessimizing
the DMA-based I/O read operations for which D-cache are already
flushed/invalidated. It also allows future optimizations whereby
the bcopy() followed by the D-cache flush can be integrated in a
single operation, which could be implemented using on-chips DMA
engines, by-passing the D-cache altogether.
2009-05-18 18:37:18 +00:00
Robert Watson
9725389e1e Don't conditionally define CACHE_LINE_SHIFT, as we anticipate sizing
a fair number of static data structures, making this an unlikely
option to try to change without also changing source code. [1]

Change default cache line size on ia64, sparc64, and sun4v to 128
bytes, as this was what rtld-elf was already using on those
platforms. [2]

Suggested by:	bde [1], jhb [2]
MFC after:	2 weeks
2009-04-20 12:59:23 +00:00
Robert Watson
22037b2d2c Add description and cautionary note regarding CACHE_LINE_SIZE.
MFC after:	2 weeks
Suggested by:	alc
2009-04-19 21:26:36 +00:00
Robert Watson
a93fa8f2bb For each architecture, define CACHE_LINE_SHIFT and a derived
CACHE_LINE_SIZE constant.  These constants are intended to
over-estimate the cache line size, and be used at compile-time
when a run-time tuning alternative isn't appropriate or
available.

Defaults for all architectures are 64 bytes, except powerpc
where it is 128 bytes (used on G5 systems).

MFC after:	2 weeks
Discussed on:   arch@
2009-04-19 20:19:13 +00:00
Marius Strobl
707085fef9 - There's no need to wrap kdb_active and kdb_trap() in #ifdef KDB as
they're always available.
- Remove unused variable. [1]
- Add a missing const.
- Sort includes.

Submitted by:	Christoph Mallon [1]
2009-03-19 20:46:51 +00:00
Andrew Thompson
2b78d30630 Remove the uscanner(4) driver, this follows the removal of the kernel scanner
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).

Reviewed by:	HPS
2009-03-19 20:33:26 +00:00
Konstantin Belousov
a4f2b2b0c6 Add AT_EXECPATH ELF auxinfo entry type. The value's a_ptr is a pointer
to the full path of the image that is being executed.
Increase AT_COUNT.

Remove no longer true comment about types used in Linux ELF binaries,
listed types contain FreeBSD-specific entries.

Reviewed by:	kan
2009-03-17 12:50:16 +00:00
Andrew Thompson
c89d41e5ff Change over the usb kernel options to the new stack (retaining existing
naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
Andrew Thompson
e31a070263 Add uslcom to the build too.
Reminded by:	Michael Butler
2009-02-15 23:40:29 +00:00
Andrew Thompson
e4edc14efd Switch over GENERIC kernels to USB2 by default.
Tested by:	make universe
2009-02-15 22:33:44 +00:00
Marius Strobl
638ed2cf8e - Use the generally more appropriate PROM base rather than the
kernel one as the non-faulting flush address in the loader so
  we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we
  ever want to without needing to worry about using a compatible
  loader.
- Correctly check for LOADER_DEBUG.
- Add a missing const for page_sizes[].

This file was missed in r188455.
2009-02-11 07:50:07 +00:00
Marius Strobl
4c67374c75 Adjust the padding of struct pcpu to r187357. 2009-01-18 13:04:38 +00:00
Nathan Whitehorn
254aa062ad Missed the sun4v update to ofw_machdep.h in the OFW modularization commit. 2008-12-20 15:11:00 +00:00
Nathan Whitehorn
91416fb268 Modularize the Open Firmware client interface to allow run-time switching
of OFW access semantics, in order to allow future support for real-mode
OF access and flattened device frees. OF client interface modules are
implemented using KOBJ, in a similar way to the PPC PMAP modules.

Because we need Open Firmware to be available before mutexes can be used on
sparc64, changes are also included to allow KOBJ to be used very early in
the boot process by only using the mutex once we know it has been initialized.

Reviewed by:    marius, grehan
2008-12-20 00:33:10 +00:00
Marcel Moolenaar
05002c354b Make gpart the default partitioning class on all platforms.
Both ia64 and powerpc were using gpart exclusively already
so there's no change for those two.

Discussed on: arch@
2008-12-17 17:43:22 +00:00
Warner Losh
db3cd725a5 AT_DEBUG and AT_BRK were OBE like 10 years ago, so retire them.
Reviewed by:	peter
2008-12-17 06:56:58 +00:00
Nathan Whitehorn
94b4a038a1 Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular,
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.

This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.

Reviewed by:	marius
Obtained from:	sparc64
2008-12-15 15:31:10 +00:00
Ed Schouten
bfba40a452 Remove "[KEEP THIS!]" from COMPAT_43TTY. It's not really that important.
Sgtty is a programming interface that has been replaced by termios over
the years. In June we already removed <sgtty.h>, which exposes the
ioctl()'s that are implemented by this interface. The importance of this
flag is overrated right now.
2008-12-02 19:09:08 +00:00
Kip Macy
db7f0b974f - bump __FreeBSD version to reflect added buf_ring, memory barriers,
and ifnet functions

- add memory barriers to <machine/atomic.h>
- update drivers to only conditionally define their own

- add lockless producer / consumer ring buffer
- remove ring buffer implementation from cxgb and update its callers

- add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to
  allow drivers to efficiently manage multiple hardware queues
  (i.e. not serialize all packets through one ifq)
- expose if_qflush to allow drivers to flush any driver managed queues

This work was supported by Bitgravity Inc. and Chelsio Inc.
2008-11-22 05:55:56 +00:00
Marius Strobl
c2526b097f - In GCC 4.2 __builtin_frame_address() was fixed to include the
V9 stack bias so we no longer need to add it in db_backtrace()
  and stack_capture() respectively. This also reverts r182018,
  which kludged around the resulting unaligned access.
- Sync the sun4v versions of db_trace.c and stack_machdep.c with
  the sparc64 ones and fix some style bugs.

MFC after:	3 days
2008-10-27 21:31:14 +00:00
Peter Wemm
e6592ee55c Collect N identical (or near identical) mkdumpheader() implementations into
one, as threatened in the comment.  Textdump magic can be passed in.
2008-10-01 22:08:53 +00:00
Marius Strobl
6f04e7b9aa Remove ipi_all() and ipi_self() as the former hasn't been used at
all to date and the latter also is only used in ia64 and powerpc
code which no longer serves a real purpose after bring-up and just
can be removed as well. Note that architectures like sun4u also
provide no means of implementing IPI'ing a CPU itself natively
in the first place.

Suggested by:	jhb
Reviewed by:	arch, grehan, jhb
2008-09-28 18:34:14 +00:00
Marius Strobl
d8f4dd34d6 Work around Cheetah+ erratum 34 (USIII+ erratum #10) by relocating
the locked entry in it16 slot 0, which typically is occupied by the
PROM, and manually entering locked entries in slots != 0.

Thanks to Hubert Feyrer for donating the Blade 2000 this change was
developed on.
2008-09-10 20:07:08 +00:00
Marius Strobl
fd9d647916 MFsparc64: r177642
Remove sysbeep() from the non-beeping archs.
2008-09-02 21:35:57 +00:00
Marius Strobl
b12572f400 Resurrect clock.c from r164371. 2008-09-02 21:28:04 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
John Baldwin
70d12a18f2 Export 'struct pcpu' to userland w/o requiring _KERNEL. A few ports
already define _KERNEL to get to this and I'm about to add hooks to
libkvm to access per-CPU data.

MFC after:	1 week
2008-08-19 19:53:52 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Marius Strobl
0b1bfc4986 - Reimplement {d,i}tlb_enter() and {d,i}tlb_va_to_pa() in C. There's
no particular reason for them to be implemented in assembler and
  having them in C allows easier extension as well as using more C
  macros and {d,i}tlb_slot_max rather than hard-coding magic (and
  actually spitfire-only) values.
- Fix the compilation of pmap_print_tte().
- Change pmap_print_tlb() to use ldxa() rather than re-rolling it
  inline as well as TLB_DAR_SLOT and {d,i}tlb_slot_max rather than
  hardcoding magic (and actually spitfire-only) values.
- While at it, suffix the above mentioned functions with "_sun4u" to
  underline they're architecture-specific.
- Use __FBSDID and macros instead of magic values in locore.S.
- Remove unused includes and smp_stack in locore.S.
2008-08-07 22:46:25 +00:00