filtering mechanisms to use the new rwlock(9) locking API:
- Drop the variables stored in the phil_head structure which were specific to
conditions and the home rolled read/write locking mechanism.
- Drop some includes which were used for condition variables
- Drop the inline functions, and convert them to macros. Also, move these
macros into pfil.h
- Move pfil list locking macros intp phil.h as well
- Rename ph_busy_count to ph_nhooks. This variable will represent the number
of IN/OUT hooks registered with the pfil head structure
- Define PFIL_HOOKED macro which evaluates to true if there are any
hooks to be ran by pfil_run_hooks
- In the IP/IP6 stacks, change the ph_busy_count comparison to use the new
PFIL_HOOKED macro.
- Drop optimization in pfil_run_hooks which checks to see if there are any
hooks to be ran, and returns if not. This check is already performed by the
IP stacks when they call:
if (!PFIL_HOOKED(ph))
goto skip_hooks;
- Drop in assertion which makes sure that the number of hooks never drops
below 0 for good measure. This in theory should never happen, and if it
does than there are problems somewhere
- Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep
- Drop variables which support home rolled read/write locking mechanism from
the IPFW firewall chain structure.
- Swap out the read/write firewall chain lock internal to use the rwlock(9)
API instead of our home rolled version
- Convert the inlined functions to macros
Reviewed by: mlaier, andre, glebius
Thanks to: jhb for the new locking API
If net.link.ether.inet.useloopback=1 and we send broadcast packet using our
own source ip address it may be rejected by uRPF rules.
Same bug was fixed for IPv6 in rev. 1.115 by suz.
PR: kern/76971
Approved by: glebius (mentor)
MFC after: 3 days
errors from rn_inithead back to the ipfw initialization function.
- Check return value of rn_inithead for failure, if table allocation has
failed for any reason, free up any tables we have created and return ENOMEM
- In ipfw_init check the return value of init_tables and free up any mutexes or
UMA zones which may have been created.
- Assert that the supplied table is not NULL before attempting to dereference.
This fixes panics which were a result of invalid memory accesses due to failed
table allocation. This is an issue mainly because the R_Zalloc function is a
malloc(M_NOWAIT) wrapper, thus making it possible for allocations to fail.
Found by: Coverity Prevent (tm)
Coverity ID: CID79
MFC after: 1 week
Correct insecure temporary file usage in ee. [06:02]
Correct a race condition when setting file permissions, sanitize file
names by default, and fix a buffer overflow when handling files
larger than 4GB in cpio. [06:03]
Fix an error in the handling of IP fragments in ipfw which can cause
a kernel panic. [06:04]
Security: FreeBSD-SA-06:01.texindex
Security: FreeBSD-SA-06:02.ee
Security: FreeBSD-SA-06:03.cpio
Security: FreeBSD-SA-06:04.ipfw
action argument with the value obtained from table lookup. The feature
is now applicable only to "pipe", "queue", "divert", "tee", "netgraph"
and "ngtee" rules.
An example usage:
ipfw pipe 1000 config bw 1000Kbyte/s
ipfw pipe 4000 config bw 4000Kbyte/s
ipfw table 1 add x.x.x.x 1000
ipfw table 1 add x.x.x.y 4000
ipfw pipe tablearg ip from table(1) to any
In the example above the rule will throw different packets to different pipes.
TODO:
- Support "skipto" action, but without searching all rules.
- Improve parser, so that it warns about bad rules. These are:
- "tablearg" argument to action, but no "table" in the rule. All
traffic will be blocked.
- "tablearg" argument to action, but "table" searches for entry with
a specific value. All traffic will be blocked.
- "tablearg" argument to action, and two "table" looks - for src and
for dst. The last lookup will match.
of the radix lookup tables. Since several rnh_lookup() can run in
parallel on the same table, we can piggyback on the shared locking
provided by ipfw(4).
However, the single entry cache in the ip_fw_table can't be used lockless,
so it is removed. This pessimizes two cases: processing of bursts of similar
packets and matching one packet against the same table several times during
one ipfw_chk() lookup. To optimize the processing of similar packet bursts
administrator should use stateful firewall. To optimize the second problem
a solution will be provided soon.
Details:
o Since we piggyback on the ipfw(4) locking, and the latter is per-chain,
the tables are moved from the global declaration to the
struct ip_fw_chain.
o The struct ip_fw_table is shrunk to one entry and thus vanished.
o All table manipulating functions are extended to accept the struct
ip_fw_chain * argument.
o All table modifing functions use IPFW_WLOCK_ASSERT().
Having an additional MT_HEADER mbuf type is superfluous and redundant
as nothing depends on it. It only adds a layer of confusion. The
distinction between header mbuf's and data mbuf's is solely done
through the m->m_flags M_PKTHDR flag.
Non-native code is not changed in this commit. For compatibility
MT_HEADER is mapped to MT_DATA.
Sponsored by: TCP/IP Optimization Fundraise 2005
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
* Correct handling of IPv6 Extension Headers.
* Add unreach6 code.
* Add logging for IPv6.
Submitted by: sysctl handling derived from patch from ume needed for ip6fw
Obtained from: is_icmp6_query and send_reject6 derived from similar
functions of netinet6,ip6fw
Reviewed by: ume, gnn; silence on ipfw@
Test setup provided by: CK Software GmbH
MFC after: 6 days
The ipfw tables lookup code caches the result of the last query. The
kernel may process multiple packets concurrently, performing several
concurrent table lookups. Due to an insufficient locking, a cached
result can become corrupted that could cause some addresses to be
incorrectly matched against a lookup table.
Submitted by: ru
Reviewed by: csjp, mlaier
Security: CAN-2005-2019
Security: FreeBSD-SA-05:13.ipfw
Correct bzip2 permission race condition vulnerability.
Obtained from: Steve Grubb via RedHat
Security: CAN-2005-0953
Security: FreeBSD-SA-05:14.bzip2
Approved by: obrien
Correct TCP connection stall denial of service vulnerability.
A TCP packets with the SYN flag set is accepted for established
connections, allowing an attacker to overwrite certain TCP options.
Submitted by: Noritoshi Demizu
Reviewed by: andre, Mohan Srinivasan
Security: CAN-2005-2068
Security: FreeBSD-SA-05:15.tcp
Approved by: re (security blanket), cperciva
- do not use static memory as we are under a shared lock only
- properly rtfree routes allocated with rtalloc
- rename to verify_path6()
- implement the full functionality of the IPv4 version
Also make O_ANTISPOOF work with IPv6.
Reviewed by: gnn
Approved by: re (blanket)
on an IPv4 packet as these variables are uninitialized if not. This used to
allow arbitrary IPv6 packets depending on the value in the uninitialized
variables.
Some opcodes (most noteably O_REJECT) do not support IPv6 at all right now.
Reviewed by: brooks, glebius
Security: IPFW might pass IPv6 packets depending on stack contents.
Approved by: re (blanket)
do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive
packets must be generated from the data that resides under the
stateful lock, but they must not be sent at that time, as this would
cause a lock order reversal with the normal ordering (interface's
lock, then locks belonging to the pfil hooks).
In practice, this caused deadlocks when using IPFW and if_bridge(4)
together to do stateful transparent filtering.
MFC after: 1 week
policy. It may be used to provide more detailed classification of
traffic without actually having to decide its fate at the time of
classification.
MFC after: 1 week
This is the last requirement before we can retire ip6fw.
Reviewed by: dwhite, brooks(earlier version)
Submitted by: dwhite (manpage)
Silence from: -ipfw
fields of an ICMP packet.
Use this to allow ipfw to pullup only these values since it does not use
the rest of the packet and it was failed on ICMP packets because they
were not long enough.
struct icmp should probably be modified to use these at some point, but
that will break a fair bit of code so it can wait for another day.
On the off chance that adding this struct breaks something in ports,
bump __FreeBSD_version.
Reported by: Randy Bush <randy at psg dot com>
Tested by: Randy Bush <randy at psg dot com>
IPv6 support. The header in IPv6 is more complex then in IPv4 so we
want to handle skipping over it in one location.
Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
a UMA zone instead. This should eliminate a bit of the locking
overhead associated with with malloc and reduce the memory
consumption associated with each new state.
Reviewed by: rwatson, andre
Silence on: ipfw@
MFC after: 1 week
- ip_fw_chk() returns action as function return value. Field retval is
removed from args structure. Action is not flag any more. It is one
of integer constants.
- Any action-specific cookies are returned either in new "cookie" field
in args structure (dummynet, future netgraph glue), or in mbuf tag
attached to packet (divert, tee, some future action).
o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}()
to a switch structure, so that the functions are more readable, and a future
actions can be added with less modifications.
Approved by: andre
MFC after: 2 months
mechanism used by pfil. This shared locking mechanism will remove
a nasty lock order reversal which occurs when ucred based rules
are used which results in hard locks while mpsafenet=1.
So this removes the debug.mpsafenet=0 requirement when using
ucred based rules with IPFW.
It should be noted that this locking mechanism does not guarantee
fairness between read and write locks, and that it will favor
firewall chain readers over writers. This seemed acceptable since
write operations to firewall chains protected by this lock tend to
be less frequent than reads.
Reviewed by: andre, rwatson
Tested by: myself, seanc
Silence on: ipfw@
MFC after: 1 month
A complete rationale and discussion is given in this message
and the resulting discussion:
http://docs.freebsd.org/cgi/mid.cgi?4177C8AD.6060706
Note that this commit removes only the functional part of T/TCP
from the tcp_* related functions in the kernel. Other features
introduced with RFC1644 are left intact (socket layer changes,
sendmsg(2) on connection oriented protocols) and are meant to
be reused by a simpler and less intrusive reimplemention of the
previous T/TCP functionality.
Discussed on: -arch
of protocols. The call to divert_packet() is done through a function pointer. All
semantics of IPDIVERT remain intact. If IPDIVERT is not loaded ipfw will refuse to
install divert rules and natd will complain about 'protocol not supported'. Once
it is loaded both will work and accept rules and open the divert socket. The module
can only be unloaded if no divert sockets are open. It does not close any divert
sockets when an unload is requested but will return EBUSY instead.
