Commit Graph

70 Commits

Author SHA1 Message Date
Mike Silbersack
54e84abb59 Ensure that packet counts are always reset to 0 when
a route is cloned.  Previously, they took on the count
of their parent route (which was sometimes nonzero.)

Submitted by:	Andre Oppermann <oppermann@pipeline.ch>
MFC after:	5 days
2002-05-31 04:27:51 +00:00
Alfred Perlstein
929ddbbb89 Remove __P. 2002-03-19 21:54:18 +00:00
Brian Somers
6f99b44c60 Fix a typo in a comment 2001-11-28 16:15:52 +00:00
Ruslan Ermilov
8071913df2 Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2.
Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *''
as the argument.  Pass rt_addrinfo all the way down to rtrequest1
and ifa->ifa_rtrequest.  3rd argument of ifa->ifa_rtrequest is now
``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is
using it anyways).

Benefit: the following command now works.  Previously we needed
two route(8) invocations, "add" then "change".
# route add -inet6 default ::1 -ifp gif0

Remove unsafe typecast in rtrequest(), from ``rtentry *'' to
``sockaddr *''.  It was introduced by 4.3BSD-Reno and never
corrected.

Obtained from:	BSD/OS, NetBSD
MFC after:	1 month
PR:		kern/28360
2001-10-17 18:07:05 +00:00
Ruslan Ermilov
4862bf8c0d 64-bit fixes from CSRG. 2001-10-17 11:10:55 +00:00
Ruslan Ermilov
6695313820 Don't even attempt to clone host routes.
MFC after:	1 week
2001-10-15 09:46:48 +00:00
Bill Fenner
c3cb7e5d7a Don't bother passing p to rtioctl just so it can fail to pass it to mrt_ioctl 2001-07-25 20:15:28 +00:00
Hajimu UMEMOTO
9a70151652 As commented in defined in sys/net/route.c, rt_fixchange() has a bad
effect, which would cause unnecessary route deletion:

 * Unfortunately, this has the obnoxious
 * property of also triggering for insertion /above/ a pre-existing network
 * route and clones.  Sigh.  This may be fixed some day.

The effect has been even worse, because recent versions of route.c set
the parent rtentry for cloned routes from an interface-direct route.
For example, suppose that we have an interface "ne0" that has an IPv4
subnet "10.0.0.0/24".  Then we may have a cloned route like 10.0.0.1
on the interface, whose parent route is 10.0.0.0/24 (to the interface
ne0).  Now, when we add the default route (i.e. 0.0.0.0/0),
rt_fixchange() will remove the cloned route 10.0.0.1.  The (bad) effect
also prevents rt_setgate from configuring rt_gwroute, which would not
be an intended behavior.

As suggested in the comments to rt_fixchange(), we need stricter check
in the function, to prevent unintentional route deletion.

This fix also solve the "IPV6 panic?" problem in nd6_timer().

Submitted by:	JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after:	4 days
2001-07-25 19:31:43 +00:00
Ruslan Ermilov
ffdc316d48 When looking for an interface appropriate for the (new or changing)
route in ifa_ifwithroute(), as the last resort, look up the route to
the gateway, not destination (to derive the interface from).

PR:		kern/27852
Submitted by:	Iasen Kostoff <tbyte@tbyte.org>
MFC after:	2 weeks
2001-06-04 14:13:15 +00:00
Ruslan Ermilov
089cdfad78 net/route.c:
A route generated from an RTF_CLONING route had the RTF_WASCLONED flag
  set but did not have a reference to the parent route, as documented in
  the rtentry(9) manpage.  This prevented such routes from being deleted
  when their parent route is deleted.

  Now, for example, if you delete an IP address from a network interface,
  all ARP entries that were cloned from this interface route are flushed.

  This also has an impact on netstat(1) output.  Previously, dynamically
  created ARP cache entries (RTF_STATIC flag is unset) were displayed as
  part of the routing table display (-r).  Now, they are only printed if
  the -a option is given.

netinet/in.c, netinet/in_rmx.c:

  When address is removed from an interface, also delete all routes that
  point to this interface and address.  Previously, for example, if you
  changed the address on an interface, outgoing IP datagrams might still
  use the old address.  The only solution was to delete and re-add some
  routes.  (The problem is easily observed with the route(8) command.)

  Note, that if the socket was already bound to the local address before
  this address is removed, new datagrams generated from this socket will
  still be sent from the old address.

PR:		kern/20785, kern/21914
Reviewed by:	wollman (the idea)
2001-03-15 14:52:12 +00:00
Garrett Wollman
1a11e63e1d A couple months ago, Kirk and I were doing a walkthrough of the radix-tree
search routine, and scratching our heads over why it was so obfuscated.
This delta fixes a number of confusing style bugs and renames several
structure members to have more meaningful names.  There remain a number
of odd control-flow structures.  These changes do not affect the generated
code.
2000-04-23 04:00:00 +00:00
Yoshinobu Inoue
66810dd0c3 Clear ro->ro_rt just after RTFREE().
Pleases let me make sure that no one touch the invalid ro_rt pointer,
  after splx(s) and before next ro_rt initialization.
  Though usually this seems to be already called at splnet,
  I still sometime experience kernel crash at rtfree() in my
  INET6 enabled environment where IPv6 connection is frequently used.
  (Off-course, it might be just due to another bug.)
2000-01-15 07:27:12 +00:00
Yoshinobu Inoue
6a800098cc IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-22 19:13:38 +00:00
John Polstra
68f956b85e Fix a route table leak in rtalloc() and rtalloc_ign(). It is
possible for ro->ro_rt to be non-NULL even though the RTF_UP flag
is cleared.  (Example: a routing daemon or the "route" command
deletes a cloned route in active use by a TCP connection.)  In that
case, the code was clobbering a reference to the routing table
entry without decrementing the entry's reference count.

The splnet() call probably isn't needed, but I haven't been able
to prove that yet.  It isn't significant from a performance standpoint
since it is executed very rarely.

Reviewed by:	wollman and others in the freebsd-current mailing list
1999-12-09 17:09:37 +00:00
Yoshinobu Inoue
ae5bcbff16 rtcalloc() is removed because it turned out not to be necessary for FreeBSD.
(It was added as a part of KAME patch)

Specified by: jdp@polstra.com
1999-12-09 08:56:50 +00:00
Brian Somers
a86ab8174f Only emit the ``wrong ifa'' message if the matching interface
is neither IFF_LOOPBACK or IFF_POINTOPOINT.  It's quite common
(and probably more correct) to route local IP numbers via lo0
and it makes configuration easier to assign the hostname address
to local POINTOPOINT links too.

This message usually remains hidden because the loopback interface
gets the highest interface number at boot time, but when the
ethernet interface is added later, the message can get pretty
annoying.

Also, fix a typo.

Not objected to by: freebsd-net
1999-11-23 22:30:01 +00:00
Yoshinobu Inoue
82cd038d51 KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP
for IPv6 yet)

With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-11-22 02:45:11 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Luoqi Chen
cb64988f42 Postpone route_init() until all domains are attached. 1999-04-29 03:22:19 +00:00
Matthew Dillon
831a80b0d5 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-27 22:42:27 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
Eivind Eklund
0b08f5f737 Back out DIAGNOSTIC changes. 1998-02-06 12:14:30 +00:00
Eivind Eklund
47cfdb166d Turn DIAGNOSTIC into a new-style option. 1998-02-04 22:34:03 +00:00
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
Bruce Evans
55b211e3af Removed unused #includes. 1997-10-28 15:59:26 +00:00
Bruce Evans
514ede0953 Fixed gratuitous ANSIisms. 1997-09-16 11:44:05 +00:00
Bruce Evans
4d1d4912ae Added used #include - don't depend on <sys/mbuf.h> including
<sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Julian Elischer
499676df4d add a bunch of comments to describe what's going on.
This is some of the worst code I've had to wade through in
ages and I don't want to have to start from scratch again next time.

(I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Julian Elischer
d57d661cf2 fix mixleading comment (my error.. I wrote the comment) 1997-01-26 01:00:45 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Julian Elischer
b0a76b8898 No code changes what so ever, but added about 150 lines of comments
Sorry if this makes it harder to merge in lite2 stuff but hey..
At least I can figure out what is going on whenever I end up going through those
files again..

do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
Bill Fenner
704b066633 Bugfix and simplification for rev 1.34: make sure that the route
is non-null before trying to delete it in rt_setgate(), which then
allows removal of the special-case code from the RTM_ADD case.
This should fix the panics that joerg and Phil Karn have been seeing.
1996-09-02 02:49:40 +00:00
Peter Wemm
3271a3a4f3 route.c:RTM_ADD does not check for a netmask before doing a tree walk
like it does elsewhere.  This is probably only happens when incorrect
args are given to route(8), or when running with non-IPv4 stacks but
incorrect args to the route command is no excuse for panicing!

Submitted by: Michael Clay <mclay@weareb.org>, PR#1532
1996-08-24 03:11:13 +00:00
Bill Fenner
1db1fffa03 Disallow host routes that point to themselves. These routes serve no
purpose, other than to get in the way of the ARP table and cause
"can't allocate llinfo" errors.

This change may cause gated or routed to start complaining when adding
such routes.  If so, these programs will need to be fixed to not try
to add these routes.

Reviewed by:	wollman
1996-07-10 01:34:36 +00:00
Bill Fenner
6ac3b69d76 Eliminate panic("rtfree") caused by double-freeing the route
when rt == rt->rt_gwroute .  rt == rt->gwroute shouldn't happen
in the first place, but that's another problem.

(try "route add -host <hostonmynet> <hostonmynet>; ping <hostonmynet>;
route delete <hostonmynet>")
1996-03-29 08:02:30 +00:00
David Greenman
2ee45d7d28 Move or add #include <queue.h> in preparation for upcoming struct socket
changes.
1996-03-11 15:13:58 +00:00
Peter Wemm
4bd4912865 Add more options into the conf/options and i386/conf/options.i386 files
and the #include hooks so that 'make depend' is more useful.  This
covers most of the options I regularly use (but not all) and some other
easy ones.
1996-03-02 18:24:13 +00:00
Garrett Wollman
fde327d6ab Fix memory leak in case of adding a host route on top of another one.
Pointed-out-by:  Bill Fenner <fenner@parc.xerox.com>
1996-01-24 20:27:19 +00:00
Poul-Henning Kamp
f708ef1b9e Another mega commit to staticize things. 1995-12-14 09:55:16 +00:00
Bruce Evans
af32e59f16 Fixed call to mrt_ioctl(). mrt_ioctl() for some reason has different
number of args when MROUTING is defined.
1995-12-02 19:28:24 +00:00
Poul-Henning Kamp
a98ca4699e Second batch of cleanup changes.
This time mostly making a lot of things static and some unused
variables here and there.
1995-10-29 15:33:36 +00:00
Garrett Wollman
aca1a47cb4 When adding a route fails because there is already a route with the same
(mask,value) in the tree, don't immediately return EEXIST.  Instead, check
to see if the pre-existing route was generated by protcol-cloning.  If so,
then it is OK to simply blow away the old route and re-attempt the insertion.
If not, then fall back to the same error code as before.
1995-10-16 19:09:40 +00:00
Bruce Evans
28f8db1403 Eliminate sloppy common-style declarations. There should be none left for
the LINT configuation.
1995-07-29 11:44:31 +00:00
Garrett Wollman
8e718bb4af When adding a route, set rt_ifa and rt_ifp a little earlier so that
the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Garrett Wollman
cd02a0b741 Finally finish the cloning cleanup work by making sure that clones
go away whenever a clone's parent is changed, or a route is added in a
certain set of circumstances.

This also includes code to forbid setting a route's gateway to an
address which can only be reached through that route, thus (hopefully)
eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
Garrett Wollman
a29ae2a103 Don't delete clones if they are PINNED. 1995-03-24 20:05:28 +00:00