instead of malloc(). The SWAP objects are automagically freed when there are no
more consumers. This greatly simplifies the mmap logic inside CUSE(3) in the
kernel. This change fixes an issue where mmapped memory can accumulate and never
get freed, if many different mmap sizes are needed over time. Further this
change fixes memory leaks when the CUSE(3) kernel module is unloaded.
While at it make sure the CUSE_ALLOC_PAGES_MAX limit is treated as an exclusive
limit. CUSE(3) memory maps must be less than CUSE_ALLOC_PAGES_MAX number of pages.
Reviewed by: kib @
Differential Revision: https://reviews.freebsd.org/D11392
Sponsored by: Mellanox Technologies
MFC after: 1 week
Clearing the unr in tmpfs_unmount is not correct. In the case of
multiple references to the tmpfs mount (e.g. when there are lookup
threads using it) it will not be the one to finish tmpfs_free_tmp. In
those cases tmpfs_free_node_locked will be the final one to execute
tmpfs_free_tmp, and until then the unr must be valid.
Reported by: pho
Approved/reviewed by: rstone (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12749
Inspired by a patch submission by longwitz@incore.de with many changes
for ino64 in HEAD.
PR: 199152
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
When the NFSv4.1 pNFS client is using a Flexible File Layout specifying
mirrored Data Servers, it must do the writes and commits to all mirrors.
This patch modifies the client to use a taskqueue to perform these writes
and commits concurrently.
The number of threads can't be changed for taskqueue(9), so it is set
to 4 * mp_ncpus by default, but this can be overridden by setting the
sysctl vfs.nfs.pnfsiothreads.
Differential Revision: https://reviews.freebsd.org/D12632
The client IP address was not being reported for some NFSv4 mounts by
nfsdumpstate. Upon investigation, two problems were found for mounts
using IPv4. One was that the code (originally written and tested on i386)
assumed that a "u_long" was a "uint32_t" and would exactly store an
IPv4 host address. Not correct for 64bit arches.
Also, for NFSv4.1 mounts, the field was not being filled in. This was
basically correct, because NFSv4.1 does not use a callback address.
However, it meant that nfsdumpstate could not report the client IP addr.
This patch should fix both of these issues.
For IPv6, the address will still not be reported. The original NFSv4 RFC
only specified IPv4 callback addresses. I think this has changed and, if so,
a future commit to fix reporting of IPv6 addresses will be needed.
Reported by: manu
PR: 223036
MFC after: 2 weeks
tmpfs uses unr(9) to allocate inodes. Previously when unmounting it
would individually free the units when it freed each vnode. This is
unnecessary as we can use the newly-added unrhdr_clear function to clear
out the unr in onde go. This measurably reduces the time to unmount a
tmpfs with many files.
Reviewed by: cem, lidl
Approved by: rstone (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12591
When a "pnfs" NFSv4.1 mount is hung because of an unresponsive DS,
a forced dismount wouldn't work, because the RPC socket for the DS
was not being closed. This patch fixes this.
This will only affect "pnfs" mounts where the pNFS server's DS
is unresponsive (crashed or network partitioned or...).
Found during testing of the pNFS server.
MFC after: 2 weeks
This patch adds support for the Flexible File Layout to the pNFS client.
Although the patch is rather large, it should only affect NFS mounts
using the "pnfs" option against pNFS servers that do not support File
Layout.
There are still a couple of things missing from the Flexible File Layout
client implementation:
- The code does not yet do a LayoutReturn with I/O error stats when
I/O error(s) occur when attempting to do I/O on a DS.
This will be fixed in a future commit, since it is important for the
MDS to know that I/O on a DS is failing.
- The current code does writes and commits to mirror DSs serially.
Making them happen concurrently will be done in a future commit,
after discussion on freebsd-current@ on the best way to do this.
- The code does not handle NFSv4.0 DSs. Since there is no extant pNFS
server that implements NFSv4.0 DSs and NFSv4.1 DSs makes more sense
now, I don't intend to implement this until there is a need for it.
There is support for NFSv4.1 and NFSv3 DSs.
This patch adds a few definitions for the Flex File Layout.
Until a future commit adds Flex File layout support, these new fields
are not used.
This patch should not affect the "pnfs" option for File Layout.
Such updates consisted of vast majority of modificiations, especially
in tmpfs_reg_resize.
For the case where page count did no change and the size grew we only
need to update tn_size. Use this fact to avoid vm object lock/relock.
MFC after: 1 week
This patch modifies the pNFS client layout and deviceinfo structures
to add fields and unions for the Flex File Layout. Until a future
commit adds Flex File layout support, these new fields are not used.
This patch should not affect the "pnfs" option for File Layout.
This patch adds a NFSSTA_FLEXFILE flag that will be used to enable
Flexible File Layout for the NFSv4.1 pNFS client. It is not yet
used, but will be after a future commit adds Flex File Layout support.
This patch changes nfsv4_getipaddr() and nfsrpc_fillsa() to use
a sockaddr_in * and sockaddr_in6 * instead of sockaddr_storage, to
avoid allocating the latter on the stack. It also moves the nfsrpc_fillsa()
call to after the completion of parsing of the DeviceInfo reply from
the server. This patch is in preparation for addition of Flex File
Layout support in a future commit.
It only affects the "pnfs" NFSv4.1 client mount option and should not
have changed its semantics.
When a "pnfs" NFSv4.1 mount was unmounted, it didn't free up the layouts
and deviceinfo structures. This leak only affects "pnfs" mounts and only
when the mount is umounted.
Found while testing the pNFS Flexible File layout client code.
MFC after: 2 weeks
This patch adds "vers" and "minorvers" arguments to nfscl_reqstart().
The patch always passes them in as "0" and that implies no change
in semantics. These arguments will be used by a future commit that
adds support for the Flexible File Layout.
There was a panic() in the NFS server's write operation that didn't
need to be a panic() and could just be an error return.
This patch makes that change.
Found by code inspection during development of the pNFS service.
MFC after: 2 weeks
nfsm_uiombuflist() zero filled the mbuf list to a multiple of 4bytes
as required for XDR. Unfortunately that modified an mbuf list after
it was m_copym()'d and was broken. This patch removes the zero filling code.
Since nfsm_uiombuflist() is not yet used in head/current, this has no
effect on users.
The function will be used by a future commit of code that adds Flex
File Layout support.
Move handling of these three pathconf() variables out of vop_stdpathconf()
and into devfs_pathconf() as TTY devices can only be devfs files. In
addition, only return settings for these three variables for devfs devices
whose device switch has the D_TTY flag set.
Discussed with: bde, kib
Sponsored by: Chelsio Communications
Make the NFSv4 pNFS client function nfsrpc_layoutget() a static, since it
is only used in sys/fs/nfsclient/nfs_clrpcops.c.
This prepares the code for future patches that add Flex File layout
support.
This patch adds a new function called nfsm_uiombuflist(), which is
similar to nfsm_uiombuf(), but doesn't not use the fields in
struct nfsrv_descript. This new function will be used by the pNFS client
for writing to mirrors using Flex Files layout.
The function is not yet called anywhere.
Also, get rid of #ifndef APPLE, which is ancient cruft left over from
the Mac OSX port of the NFSv4 client.
Simplify nfsrpc_layoutreturn() args. in preparation for the addition
of Flex File layout support, since File layout uses a 0 length field.
Flex Files does use a longer field, but that will be added in a
subsequent commit.
The code in nfscl_doflayoutio() bogusly used FREAD instead of
NFSV4OPEN_ACCESSREAD. Since both happen to be defined as "1", this
worked and the patch doesn't result in a functional change.
Found by inspection during development of Flex File Layout support.
MFC after: 2 weeks
FAT specification requires that for valid FAT, FAT cluster 0 has a
specific value derived from the BPB media descriptor. The lowest
(little-endian) byte must be equal to bpb.bpbMedia, other bits in the
cluster number must be all 1's. Implement the check to reduce the
chance of the randomly corrupted FAT to pass the mount attempt.
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12124
Currently several paths in the NFS client upgrade the shared vnode
lock to exclusive, which might cause temporal dropping of the lock.
This action appears to be fatal for nullfs mounts over NFS. If the
operation is performed over nullfs vnode, then bypassed down to NFS
VOP, and the lock is dropped, other thread might reclaim the upper
nullfs vnode. Since on reclaim the nullfs vnode lock and NFS vnode
lock are split, the original lock state of the nullfs vnode is not
restored. As result, VFS operations receive not locked vnode after a
VOP call.
Stop upgrading the vnode lock when we check the consistency or flush
buffers as result of detected inconsistency. Instead, allocate a new
lockmgr lock for each NFS node, which is locked exclusive instead of
the vnode lock upgrade. In other words, the other parallel
modification of the vnode are excluded by either vnode lock conflict
or exclusivity of the new lock when the vnode lock is shared.
Also revert r316529 because now the vnode cannot be reclaimed during
ncl_vinvalbuf().
In collaboration with: pho
Reviewed by: rmacklem
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12083
The previous limit of 24 was somewhat restrictive, and with this change
ceil(log2(sizeof(struct pfs_node))) is the same as before in both the ILP32
and LP64 models, so the malloc zone used for allocations of struct pfs_node
is the same as before.
Approved by: des
Linux specific things to the native fdescfs file system.
Unlike FreeBSD, the Linux fdescfs is a directory containing a symbolic
links to the actual files, which the process has open.
A readlink(2) call on this file returns a full path in case of regular file
or a string in a special format (type:[inode], anon_inode:<file-type>, etc..).
As well as in a FreeBSD, opening the file in the Linux fdescfs directory is
equivalent to duplicating the corresponding file descriptor.
Here we have mutually exclusive requirements:
- in case of readlink(2) call fdescfs lookup() method should return VLNK
vnode otherwise our kern_readlink() fail with EINVAL error;
- in the other calls fdescfs lookup() method should return non VLNK vnode.
For what new vnode v_flag VV_READLINK was added, which is set if fdescfs has beed
mounted with linrdlnk option an modified kern_readlinkat() to properly handle it.
For now For Linux ABI compatibility mount fdescfs volume with linrdlnk option:
mount -t fdescfs -o linrdlnk null /compat/linux/dev/fd
Reviewed by: kib@
MFC after: 1 week
Relnotes: yes
This change adds two new tunables, allowing to control serialization for
read and write NFS requests separately. It does not change the default
behavior since there are too many factors to consider, but gives additional
space for further experiments and tuning.
The main motivation for this change is very low write speed in case of ZFS
with sync=always or when NFS clients requests sychronous operation, when
every separate request has to be written/flushed to ZIL, and requests are
processed one at a time. Setting vfs.nfsd.fha.write=0 in that case allows
to increase ZIL throughput by several times by coalescing writes and cache
flushes. There is a worry that doing it may increase data fragmentation
on disks, but I suppose it should not happen for pool with SLOG.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
When an NFS mount is hung against an unresponsive NFS server, the "umount -f"
option can be used to dismount the mount. Unfortunately, "umount -f" gets
hung as well if a "umount" without "-f" has already been done. Usually,
this is because of a vnode lock being held by the "umount" for the mounted-on
vnode.
This patch adds kernel code so that a new "-N" option can be added to "umount",
allowing it to avoid getting hung for this case.
It adds two flags. One indicates that a forced dismount is about to happen
and the other is used, along with setting mnt_data == NULL, to handshake
with the nfs_unmount() VFS call.
It includes a slight change to the interface used between the client and
common NFS modules, so I bumped __FreeBSD_version to ensure both modules are
rebuilt.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11735
If the nfsrpc_createlayoutrpc() call in nfsrpc_getcreatelayout() fails,
the code used nfhpp when it might be set NULL. This patch checks for
the error cases (laystat != 0) and avoids using nfhpp for the failure case.
This would only affect NFSv4.1 mounts with the "pnfs" option.
Found while testing the "umount -N" patch not yet in head.
MFC after: 2 weeks
This patch defines a macro that checks for MNTK_UNMOUNTF and replaces
explicit checks with this macro. It has no effect on semantics, but
prepares the code for a future patch where there will also be a
NFS specific flag for "forced dismount about to occur".
Suggested by: kib
MFC after: 2 weeks
Suppose that a file on NFS has partially filled last page, and this
page is dirty. NFS VOP_PAGEOUT() method only marks the the page clean
up to the block of the last written byte, leaving other blocks dirty.
Also any page which erronously exists in the vnode vm_object past EOF
is also left marked as dirty.
With the introduction of the buf-cache coherent pager, each pass of
syncer over the object with such page results in creation of B_DELWRI
buffer due to VOP_WRITE() call. This buffer is noted on next syncer
pass, which results e.g. a visible manifestation of shutdown never
finishing vnode sync. Note that before buf-cache coherency commit, a
dirty page might left never synced to server if a partial writes
occur.
Fix this by clearing dirty bits after EOF. Only blocks of the partial
page which are completely after EOF are marked clean, to avoid
possible user data loss.
Reported by: mav
Reviewed by: alc, markj
Tested by: mav, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11697
