Commit Graph

29 Commits

Author SHA1 Message Date
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Oleksandr Tymoshenko
e1f04cd024 Piggyback MIPS changes and add ARM syscons support for devices with
framebuffer

While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
Robert Watson
8122a592ee Provide basic glue to allow syscons to be used on MIPS, modelled
on PowerPC support.  This was clearly not something syscons was
designed to do (very specific assumptions about the nature of VGA
consoles on PCs), but fortunately others have long since blazed
the way on making it work regardless of that.

Sponsored by:	DARPA, AFRL
2012-08-25 08:09:37 +00:00
Poul-Henning Kamp
00c5291f29 Fix the previous commit to only copy the data we were asked to and not
twice as much.

Spotted by:	Taku YAMAMOTO
2012-06-18 07:54:10 +00:00
Poul-Henning Kamp
fc9174db51 On certain newer Intel Atom based motherboards, for instance the
D2500CC which I have, syscons in text-mode fails to show the expected
contents due to write errors into video-memory.

At least one of the causes is that we copy from syscons internal buffer
to the video memory with optimized bcopy(9) which uses >16bit operations.

Until now, 32bit and wider operations have always worked on the video
memory, but since I cannot find a single source which says that this
SHALL work, and since these chipsets/bugs are now out there, this
commit changes syscons to always use 16bit copies on i386 & amd64.

This may be relevevant for PR's:
	166262
	166639
and various other bug reports floating elsewhere on the net, but
I lack hardware to test those.
2012-06-17 21:02:48 +00:00
Konstantin Belousov
95882b9865 Remove unused i586 optimized bcopy/bzero/etc implementations that utilize
FPU registers for copying. Remove the switch table and jumps from
bcopy/bzero/... to the actual implementation.
As a side-effect, i486-optimized bzero is removed.

Reviewed by:	bde
Tested by:	pho (previous version)
2010-06-23 10:40:28 +00:00
Robert Noland
cfd7bacef2 Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.

Purge d_mmap2().

All driver modules will need to be rebuilt since D_VERSION is also
bumped.

Reviewed by:	jhb@
MFC after:	Not in this lifetime...
2009-12-29 21:51:28 +00:00
Wojciech A. Koszek
9336e0699b Replace explicit calls to video methods with their respective variants
implemented with macros. This patch improves code readability. Reasoning
behind vidd_* is a sort of "video discipline".

List of macros is supposed to be complete--all methods of video_switch
ought to have their respective macros from now on.

Functionally, this code should be no-op. My intention is to leave current
behaviour of touched code as is.

No objections:	rwatson
Silence on:	freebsd-current@
Approved by:	cognet
2007-12-29 23:26:59 +00:00
Marius Strobl
2f11f3372a On sparc64 also use the fillw() this header provides for ia64 so
the sparc64 MD code doesn't need to provide a memsetw() along with
the ISA compat cruft.
2007-01-18 13:08:08 +00:00
Ruslan Ermilov
44e09d2fa2 Fix -Wundef warnings from compiling GENERIC and LINT kernels of
all architectures.
2005-12-06 11:19:37 +00:00
Marius Strobl
b7c96c0d0b Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t
and do some preparations for handling 12x22 fonts (currently lots of code
implies and/or hardcodes a font width of 8 pixels). This will be required
on sparc64 which uses a default font size of 12x22 in order to add font
loading and saving support as well as to use a syscons(4)-supplied mouse
pointer image.
This API breakage is committed now so it can be MFC'ed in time for 6.0
and later on upcoming framebuffer drivers destined for use on sparc64
and which are expected to rely on using font loading internally and on
a syscons(4)-supplied mouse pointer image can be easily MFC'ed to
RELENG_6 rather than requiring a backport.

Tested on:	i386, sparc64, make universe
MFC after:	1 week
2005-09-28 14:54:07 +00:00
Peter Grehan
a2dce78a84 __powerpc__ conditional code for the syscons OpenFirmware/PPC framebuffer.
Took the opportunity to reduce

 __i386__ || __ia64__ || __amd64__ || __sparc64__ || __powerpc__

 to

 !__alpha__

reviewed by: gallatin
2004-01-21 05:08:51 +00:00
Poul-Henning Kamp
4866f95d76 Change fb_attach() and fb_detach() to take a integer unit number rather
than a dev_t.

All of the dev_t's passed were bogusly created with makedev()
2003-09-26 10:41:44 +00:00
Marcel Moolenaar
fe9d118aa2 o Explicitly cast the second argument to bus_space_set_region_#()
to intptr_t. This fixes a compiler warning (integer from pointer
   without cast) in scvgarndr.c when SC_PIXEL_MODE is defined.
o  Define readb() and writeb(). Both are used in scvgarndr.c when,
   guess what, SC_PIXEL_MODE is defined.

Both changes are ia64 specific.

Found by: LINT
2003-08-23 08:52:52 +00:00
Peter Wemm
8c3765708a Add AMD64 support to dev/fb. It isn't optimized. 2003-05-01 04:21:05 +00:00
Marcel Moolenaar
0ba311ef3a Keep syscons specific I/O functions internal/specific to syscons on
ia64 by defining them in terms of newbus. Add a static inline for
fillw(), which doesn't have anything to do with I/O.
It's still ugly, but now the ugliness can be removed from ia64
specific headers.
2003-04-29 07:06:44 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Maxime Henrion
07159f9c56 Cleanup of the d_mmap_t interface.
- Get rid of the useless atop() / pmap_phys_address() detour.  The
  device mmap handlers must now give back the physical address
  without atop()'ing it.
- Don't borrow the physical address of the mapping in the returned
  int.  Now we properly pass a vm_offset_t * and expect it to be
  filled by the mmap handler when the mapping was successful.  The
  mmap handler must now return 0 when successful, any other value
  is considered as an error.  Previously, returning -1 was the only
  way to fail.  This change thus accidentally fixes some devices
  which were bogusly returning errno constants which would have been
  considered as addresses by the device pager.
- Garbage collect the poorly named pmap_phys_address() now that it's
  no longer used.
- Convert all the d_mmap_t consumers to the new API.

I'm still not sure wheter we need a __FreeBSD_version bump for this,
since and we didn't guarantee API/ABI stability until 5.1-RELEASE.

Discussed with:		alc, phk, jake
Reviewed by:		peter
Compile-tested on:	LINT (i386), GENERIC (alpha and sparc64)
Runtime-tested on:	i386
2003-02-25 03:21:22 +00:00
David E. O'Brien
0301e9c83b Turn on TGA support.
Submitted by:	Andrew M. Miklic <AndrwMklc@cs.com>
2002-04-13 22:34:16 +00:00
Dag-Erling Smørgrav
b1511f4fb5 syscons' set_border() is now named sc_set_border(), so there is no longer
a naming conflict.
2001-11-06 02:36:26 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Kazutaka YOKOTA
6d1699583d Add some definitions. Their actual support will be added
to video drivers later.
2001-08-02 11:17:38 +00:00
Peter Wemm
f41325db5f With this commit, I hereby pronounce gensetdefs past its use-by date.
Replace the a.out emulation of 'struct linker_set' with something
a little more flexible.  <sys/linker_set.h> now provides macros for
accessing elements and completely hides the implementation.

The linker_set.h macros have been on the back burner in various
forms since 1998 and has ideas and code from Mike Smith (SET_FOREACH()),
John Polstra (ELF clue) and myself (cleaned up API and the conversion
of the rest of the kernel to use it).

The macros declare a strongly typed set.  They return elements with the
type that you declare the set with, rather than a generic void *.

For ELF, we use the magic ld symbols (__start_<setname> and
__stop_<setname>).  Thanks to Richard Henderson <rth@redhat.com> for the
trick about how to force ld to provide them for kld's.

For a.out, we use the old linker_set struct.

NOTE: the item lists are no longer null terminated.  This is why
the code impact is high in certain areas.

The runtime linker has a new method to find the linker set
boundaries depending on which backend format is in use.

linker sets are still module/kld unfriendly and should never be used
for anything that may be modular one day.

Reviewed by:	eivind
2001-06-13 10:58:39 +00:00
Peter Wemm
664a31e496 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 04:46:21 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Kazutaka YOKOTA
6e8394b8ba The second phase of syscons reorganization.
- Split syscons source code into manageable chunks and reorganize
  some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV.  When this key is pressed, the vty
  immediately before the current vty will become foreground.  Analogue
  to PREV, which is usually assigned to the PrntScrn key.
  PR: kern/10113
  Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
  handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized.  It now should be slightly more
  robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
  APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
  SC_NO_HISTORY and SC_NO_SYSMOUSE.
  Various parts of syscons can be omitted so that the kernel size is
  reduced.

  SC_PIXEL_MODE
  Made the VESA 800x600 mode an option, rather than a standard part of
  syscons.

  SC_DISABLE_DDBKEY
  Disables the `debug' key combination.

  SC_ALT_MOUSE_IMAGE
  Inverse the character cell at the mouse cursor position in the text
  console, rather than drawing an arrow on the screen.
  Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

  SC_DFLT_FONT
  makeoptions "SC_DFLT_FONT=_font_name_"
  Include the named font as the default font of syscons.  16-line,
  14-line and 8-line font data will be compiled in.  This option replaces
  the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
  frame buffer.

- New kernel configuration option: VGA_WIDTH90
  Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60.  These
  modes are mot always supported by the video card.
  PR: i386/7510
  Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
  split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
  (another new file).  machine/console.h is still maintained for
  compatibility reasons.

- Kernel console selection/installation routines are fixed and
  slightly rebumped so that it should now be possible to switch between
  the interanl kernel console (sc or vt) and a remote kernel console
  (sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
  Because of the header file reorganization described above, screen
  savers and splash screen decoders are slightly modified.  After this
  update, /sys/modules/syscons/saver.h is no longer necessary and is
  removed.
1999-06-22 14:14:06 +00:00
Dag-Erling Smørgrav
601752d5a7 Centralize and reorganize a few macros. 1999-04-12 13:34:58 +00:00
Kazutaka YOKOTA
f359876ff1 syscons
- Bring down the splash screen when a vty is opened for the first
  time.
- Make sure the splash screen/screen saver is stopped before
  switching vtys.
- Read and save initial values in the BIOS data area early.
  VESA BIOS may change BIOS data values when switching modes.
- Fix missing '&' operator.
- Move ISA specific part of driver initialization to syscons_isa.c.

atkbd
- kbdtables.h is now in /sys/dev/kbd.

all
- Adjust for forthcoming alpha port.  Submitted by: dfr
1999-01-19 11:31:22 +00:00
Kazutaka YOKOTA
617b908036 Add the new keyboard driver and video card driver. They will be
used by console drivers.

(They are not yet activated yet.  Wait for announcement later.)
1999-01-09 02:44:50 +00:00