Commit Graph

259 Commits

Author SHA1 Message Date
Mike Smith
11ca1e30c7 Bump the default NBUS value to 8. 2000-05-31 19:01:45 +00:00
Brian Feldman
c0c5a953c0 Change sl(4) configuration lines to reflect its new dynamic nature. 2000-05-30 23:01:37 +00:00
Dan Moschuk
4f14ee00f2 sysctl'ize ICMP_BANDLIM and ICMP_BANDLIM_SUPPRESS_OUTPUT.
Suggested by: des/nbm
2000-05-22 16:12:28 +00:00
Tim Vanderhoek
214d1c55f7 Change to comments only: spell FreeBSD.org correctly 2000-05-13 11:21:19 +00:00
John Baldwin
558d6032c2 Turn on USB support for most USB devices. udbp is not turned on since
NETGRAPH is not present in GENERIC at the moment.  Also, change some
settings to support USB installs:

- Add KBD_INSTALL_CDEV as an option to make /dev/kbd[01] actually work.
- Turn on keyboard probing in sc0.  The syscons driver will now use a
  flag documented in ukbd(4) but not in sc(4) that tells syscons to
  actively search for a keyboard device if none is found.  This allows
  USB keyboards to just be plugged in and instantly start working.
- Require the atkbd0 driver to actually probe to see if a keyboard is
  there.  This allows USB keyboards to be seen by sc0 if an AT keyboard
  isn't plugged into the computer.  This also means that you will no
  longer be able to plug an AT keyboard into a machine after it has
  booted a GENERIC kernel and use it.  AT keyboards aren't designed for
  this anyway.  USB keyboards are designed for this, and they work.
2000-05-12 03:05:35 +00:00
Warner Losh
0ab302bfbe Move sn and cs drivers from the compat section to the real section.
Enable xe driver now that I've had reports that it works.

PR: 18323
Submitted by: MIHIRA Yoshiro-san
2000-05-03 00:49:57 +00:00
Nick Hibma
b5ea1f0c77 The USB double bulk pipe driver (Host to host cables). Currently there
are two supported chips, the NetChip 1080 (only prototypes available)
and the EzLink cable. Any other cable should be supported however as they
are all very much alike (there is a difference between them wrt
performance).

It uses Netgraph.

This driver was mostly written by Doug Ambrisko and Julian Elischer and
I would like to thank Whistle for yet another contribution. And my
aplogies to them for me sitting on the driver for so long (2 months).

Also, many thanks to Reid Augustin from NetChip for providing me with a
prototype of their 1080 chip.

Be aware of the fact that this driver is very immature and has only been
tested very lightly. If someone feels like learning about Netgraph however
this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
Jeroen Ruigrok van der Werven
aec5a3b342 Fix typo, extentions -> extensions
Submitted by:	George Cox <gjvc@sophos.com>
2000-04-15 18:46:15 +00:00
Warner Losh
0d5c223da4 Awi driver, ported from NetBSD from Atsushi Once-san.
From the README:
	Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
	with PCnetMobile firmware by AMD.
	   BayStack 650   1Mbps Frequency Hopping PCCARD adapter
	   BayStack 660   2Mbps Direct Sequence PCCARD adapter
	   Icom SL-200    2Mbps Direct Sequence PCCARD adapter
	   Melco WLI-PCM  2Mbps Direct Sequence PCCARD adapter
	   NEL SSMagic    2Mbps Direct Sequence PCCARD adapter
	   Netwave AirSurfer Plus
			  1Mbps Frequency Hopping PCCARD adapter
	   Netwave AirSurfer Pro
			  2Mbps Direct Sequence PCCARD adapter

Known Problems:
	WEP is not supported.
	Does not create IBSS itself.
	Cannot configure the following on FreeBSD:
		selection of infrastructure/adhoc mode
		ESSID
		...

Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
2000-04-06 02:48:48 +00:00
Hellmuth Michaelis
afb8931fa8 Remove obsolete reference to PCVT_FREEBSD. 2000-04-04 13:14:43 +00:00
Dan Moschuk
6ad9d70260 Include a space between hash ('#') and 'Berkeley packet filter' like
all the other comments have.
2000-03-21 17:00:58 +00:00
Peter Wemm
4e64b0d320 Document and supply COMPAT_OLDPCI and COMPAT_OLDISA so 'make release'
still works.
2000-03-19 13:33:26 +00:00
Nick Hibma
e2dbd15f2e Please welcome the URio driver. Written by
Iwasa Kazmi <kzmi\@ca2.so-net.ne.jp>
2000-03-16 09:16:14 +00:00
Jonathan Lemon
5e3488e373 Add Compaq `ida' driver to GENERIC, update it's LINT entry.
Approved by:	jordan
2000-03-09 16:32:56 +00:00
Brian Feldman
60bfc3b09b Do some cleanups of the IPv6 stuff. This is a non-functional change.
Approved by:	jkh
2000-02-27 07:35:42 +00:00
Jordan K. Hubbard
0dab491675 Enable IPv6 support by default. 2000-02-26 22:09:31 +00:00
Nick Hibma
418a4537cf Update the documentation to reflect Bill Paul's latest changes. 2000-02-20 14:41:54 +00:00
Kazutaka YOKOTA
528b8853bb Make it clear that 'options XSERVER' is for pcvt and not for syscons.
Submitted by: Doug Barton <Doug@gorean.org>
Approved by: jkh
2000-02-16 04:27:04 +00:00
Jordan K. Hubbard
4a04162824 Clean up POSIX options, syncronize generics. 2000-02-04 07:02:53 +00:00
Nick Hibma
764d1fc491 da0 -> da 2000-02-01 09:32:04 +00:00
Peter Wemm
68b538c712 Remove 'conflicts' token - it has been effectively doing absolutely
nothing for quite some time.  The only thing that cared was userconfig,
but it was for one invisible device so we never saw it's effects.
2000-01-29 18:07:07 +00:00
Warner Losh
173c0f9f5c Mitigate the stream.c attacks
o Drop all broadcast and multicast source addresses in tcp_input.
o Enable ICMP_BANDLIM in GENERIC.
o Change default to 200/s from 100/s.  This will still stop the attack, but
  is conservative enough to do this close to code freeze.

This is not the optimal patch for the problem, but is likely the least
intrusive patch that can be made for this.

Obtained from: Don Lewis and Matt Dillon.
Reviewed by: freebsd-security
2000-01-28 06:13:09 +00:00
Peter Wemm
b33b19409d Remove a bunch of no-op "port ?" and "irq ?" declarations. 2000-01-24 08:49:24 +00:00
Bruce Evans
621d865f30 Removed bogus quotes and unmangled related contractions.
"ktrace(1) syscall trace" -> "ktrace(1)".
2000-01-24 05:38:55 +00:00
Peter Wemm
97608dbe74 Some formatting cleanups and remove comments about numbers of units that
were intended to head off confusion about the trailing '0'.
2000-01-23 18:30:35 +00:00
Peter Wemm
0d31b1798d Drop 'at ppbus?' and the trailing '0' from the ppbus children. 2000-01-23 14:46:20 +00:00
Peter Wemm
c9953c3b9e Update GENERIC/LINT to leave out the useless digit at the end of pci
or other unwired devices.
2000-01-23 12:18:53 +00:00
Warner Losh
f0e4bd3f99 Add the two wireless pccard nics. 2000-01-23 04:29:17 +00:00
Wilko Bulte
29429dde38 updated comments 2000-01-21 20:19:18 +00:00
Jordan K. Hubbard
c5954134e4 Enable POSIX P1003_1B extentions by default; there's no reason I can see
not to class them with the SYSV extentions as "optional but damn useful".

Also desired by:	wollman
2000-01-18 07:52:12 +00:00
Bill Paul
261b9b3066 Add driver support for the Aironet 4500/4800 series wireless 802.11
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.

Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00
Peter Wemm
a7c517ceaf Add back the 'at ppbus?' for the lpt etc drivers. Now it's used. 2000-01-14 08:16:28 +00:00
Bill Paul
0177987224 Add device driver support for USB ethernet adapters based on the CATC
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).

Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
2000-01-14 03:14:49 +00:00
Matthew N. Dodd
1f3e0d3de8 Remove the 'at isa? ...' bits for ex0.
Remove the confusing text about pccard and unit numbers for ep0.
2000-01-13 07:01:13 +00:00
David E. O'Brien
c201f69bed Sort. 2000-01-12 02:30:42 +00:00
Warner Losh
89ce66ed87 Uncomment pcic device and put pccard in GENERIC. PCCARD will be removed
in a little while as soon as I find all the places it is used in the
tree.
2000-01-10 02:29:23 +00:00
Peter Wemm
62d128b859 s/controller/device/ as per config(8) changes 2000-01-08 15:59:12 +00:00
Bill Paul
dfd1e98eac Add device driver support for USB ethernet adapters based on the
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).

Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.

Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
Matt Jacob
b6ca8f5a13 add wx0 driver 2000-01-04 11:17:35 +00:00
Bill Paul
ed63a7aaef This commit adds device driver support for the ADMtek AN986 Pegasus
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.

Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.

Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.

Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.

Highlights:

- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
1999-12-28 02:01:18 +00:00
Bill Paul
b6219c623c Fix minor typo in comments about WaveLAN/IEEE driver: 802.1 -> 802.11 1999-12-23 05:32:53 +00:00
David E. O'Brien
19b132d78b Turn on the sym' driver by default. It lives well beside the ncr' driver
now.  On one machine with <825a> and <875> controllers, `sym' correctly
attached.  On another one with only a <ncr 53c810 fast10 scsi>, the `ncr'
driver correctly attached.
1999-12-22 05:52:04 +00:00
Bill Fumerola
65bbe4e33a Borrow phk's axe and chop off the old soundcard-CDROM devices. We get
about 40k of savings from this, and these abominations are still in LINT
if anyone needs to use them.

Reviewed by:	jkh
1999-12-19 20:33:05 +00:00
Mark Murray
70c3f04993 Comment and order to reduce diffs. No functional change. 1999-12-19 17:12:19 +00:00
Warner Losh
4e820cbe37 spell isa right on sn0 line 1999-12-18 07:49:54 +00:00
Warner Losh
22ffd22dbd Driver for the smc91xx series of ethernet chips. Ported from PAO to
3.3R and then to -current.  The pccard support has been left in the
driver, but is presently non-functional because we are using the
isa_compat layer for the moment.

Obtained From: PAO
Sponsored by: Timing Solutions
1999-12-18 06:11:22 +00:00
Poul-Henning Kamp
5fe1db5b0a Remove the if_ze and if_zp drivers.
These drivers were cloned from the ed and ep drivers back in 1994
when PCMCIA cards were a very new thing and we had no other support
for such devices.  They treated the PCIC (the chip which controls the
PCCARD slot) as part of their device and generally hacked their way
to success.  They have significantly bit-rotted relative to their
ancestor drivers (ed & ep) and they were a dead-end on the evolution
path to proper PCCARD support in FreeBSD.

They have been terminally broken since August 18 where mdodd forgot
them and nobody seems to have missed them enough to fix them since.

I found no outstanding PRs against these drivers.
1999-12-10 10:45:11 +00:00
Søren Schmidt
a3fb836cb5 Finally use the new ata driver. 1999-12-08 09:19:37 +00:00
Peter Wemm
9e03cab563 Fold the pnp code into the base isa system to pave the way for PNPBIOS.
Reviewed by:	dfr (a few weeks ago)
1999-12-06 18:17:42 +00:00
Luoqi Chen
ee46a57116 Reinstate the aic driver.
PR:		conf/15187
1999-12-05 01:56:42 +00:00