Commit Graph

122 Commits

Author SHA1 Message Date
Xin LI
90de8d2a65 Put the signal trap output to standard error instead of standard output.
Without this change, pressing ^T could result in rc.d script putting
junk strings like:

	Script <filename> running

in configuration files when redirecting standard output to these files.

MFC after:	2 weeks
2012-02-18 00:46:18 +00:00
Doug Barton
20ceedfb69 Fix various issues with the NFS and RPC related scripts:
1. Add new functionality to the force_depend method to incorporate the
   tests for whether the service is enabled and/or already running.
2. Add a new option to bypass checking only that the service is enabled
   at boot time, and always check if it is running.
3. Use this new functionality to greatly simplify the rc.d scripts that
   use force_depend.
4. Add a force_depend for statd in lockd
5. Remove the check that either nfs_server or nfs_client is _enable'd
   from statd and lockd. This was always overkill, and prevented using
   the {one|force}start options, as well as stop'ing on the command line.
6. The yp* scripts had some of their arguments in various weird orders.
   Bring them into line with the model.
7. If mountd fails to create /var/db/mountdtab, err out.

Ideas, suggestions, and/or review from delphij and jilles.
Pointy hats are completely my responsibility however.
2012-02-14 10:51:24 +00:00
Doug Barton
72fc1aafe2 If we're booting there is no need to waste time determining if the service
is running or not.

PR:		conf/150752
Submitted by:	YIN Xiaofeng <75394094@qq.com>
2012-01-20 10:31:27 +00:00
Doug Barton
61d4638e52 Now that its callers have been udpated, remove set_rcvar().
The concept of set_rcvar() was nice in theory, but the forks
it creates are a drag on the startup process, which is especially
noticeable on slower systems, such as embedded ones.
2012-01-14 08:59:02 +00:00
Eygene Ryabinkin
0113cca483 rc.d: document 'quiet' prefix and fix dhclient/devd interaction
Document the current semantics of the 'quiet' command prefix
in the rc.subr(8).

Fix dhclient rc.d script: it should not call err() for
non-DHCP-enabled interface when it is called from devd, because the
latter just blindly calls 'service dhclient quietstart' on each "link
up" event.

Since the 'quietstart' will silence the message "Cannot 'start' <foo>.
Set <foo>_enable to YES in /etc/rc.conf or use 'onestart' instead of
'start'." and running dhclient on the non-DHCP-enabled interface is
the same thing as running the service <foo> without <foo>_enable set,
such modification is in sync with the current semantics of the 'quiet'
prefix.

Approved by: glebius
Reviewed by: freebsd-rc list
MFC after:	2 weeks
2012-01-12 06:48:11 +00:00
Doug Barton
a194b02d88 There is no longer a need to abstract ${rcvar_manpage} as we are not
attempting to maintain compatibility with NetBSD for some years now.
2012-01-08 20:25:29 +00:00
Ulrich Spörlein
081dc98788 Spelling fixes for etc/ 2012-01-07 16:10:32 +00:00
Jilles Tjoelker
e60150fafa rc.d: Eliminate some unnecessary non-POSIX constructs:
* set - ...
 * empty braces
 * ^ in character class
2011-11-08 23:02:32 +00:00
Jilles Tjoelker
1cbcfc538b rc.subr: Make sure all functions are under if [ -z "${_rc_subr_loaded}" ]. 2011-06-19 15:23:32 +00:00
Jilles Tjoelker
5062455134 rc.subr: Eliminate a fork from check_kern_features, like r223227.
MFC after:	2 weeks
2011-06-19 11:42:48 +00:00
Jilles Tjoelker
cfb739b854 rc.subr: Eliminate about 100 forks from the boot sequence.
With the current sh, placing eval in a command substitution always results
in a fork(), even if it is the only command and only executes a single
simple command. Therefore, avoid it where it can be avoided easily.

Side effect: values starting with a hyphen and all whitespace are preserved.
The values are defaults and names for rc.conf variables and messages to be
given about obsolete ones.

MFC after:	2 weeks
2011-06-18 11:05:30 +00:00
Hiroki Sato
d3ae0231fe Add a helper function to check kern.features.* sysctls.
Discussed with:	dougb
2011-06-11 21:40:37 +00:00
Doug Barton
d7c2f00c7c As previously advertised, remove the error message for enable_quotas
prior to 9.0-RELEASE.

This change should not be MFC'ed.
2011-04-23 17:37:14 +00:00
Doug Barton
b1850238b7 Improve the error handling for the new get_pidfile_from_conf() 2011-04-23 05:24:17 +00:00
Doug Barton
8028832653 Introduce to rc.subr get_pidfile_from_conf(). It does just what it sounds
like, determines the path to a pid file as it is specified in a conf file.

Use the new feature for rc.d/named and rc.d/devd, the 2 services in the
base that list their pid files in their conf files.

Remove the now-obsolete named_pidfile, and warn users if they have it set.
2011-04-23 04:26:31 +00:00
Doug Barton
ed52acf61d The change in r206686 to allow the stop argument to work for a service
that is running even though not _enable'd had an annoying side effect.
If the service was already started at boot time by another means when
the related script came around again in rcorder it would start again,
regardless of _enable, because there was a valid pid. [1]

So, split the test into 2 parts, one for (!rcvar && !stop), and one
for (stop && !valid_pid). This preserves the behavior from r206686
while preventing the undesired side effect.

PR:		conf/156427 [1]
Submitted by:	Eugene Grosbein <eugen@grosbein.pp.ru> [1]
2011-04-17 22:31:36 +00:00
Doug Barton
a3b50b5603 Revert r219578 2011-03-13 16:27:36 +00:00
Doug Barton
e729c4f2fd Use the allexport option in load_rc_config() in order to avoid having
to repeatedly read the conf files. Depending on what is enabled the
files are being read anywhere from 15, 30, or more times currently.
By loading the values in the environment this is reduced to 1, with
perhaps a couple more, again depending on what is enabled.

The speed-up for boot and shutdown is negligible when rc.conf is
on local disk, noticable when accessing files over NFS, and dramatic
when pulling rc.conf values from a database.

This change also includes a minor optimization to the conditional
for $_rc_conf_loaded.
2011-03-12 21:13:08 +00:00
Jaakko Heinonen
8ef92ea65e Warn if rules could not be read from a ruleset file. Now at least
something gets logged if the file has syntax errors.

PR:		conf/91342
Silence on:	freebsd-rc
2011-01-07 10:59:22 +00:00
Doug Barton
15539a8a80 Fix silly typo on my part (s/quotas_enable/quota_enable/)
Submitted by:	ed
2010-08-14 22:28:07 +00:00
Doug Barton
a7112b557f Give people some warning before removing enable_quotas 2010-08-14 18:58:05 +00:00
Doug Barton
d52bba9301 If a service is running, make 'stop' work even if ${name}_enable
is not set.

PR:		conf/130414
Submitted by:	Dominic Fandrey <kamikaze@bsdforen.de>
Reviewed by:	freebsd-rc@
2010-04-15 21:18:24 +00:00
Doug Barton
a6f9d19c1e In wait_for_pids(), pwait(1) can return when the process exits, but
still exists as a zombie. The 'kill -0' test in this function can
therefore return true even if the process isn't actually running.
This could lead to wait_for_pids() printing an endless string of the
pid number until the zombie finally exits.

Solve this problem by moving the sleep up to after the 'kill -0' test, but
only after we've run through the function once already. In the common case
(only one pid in the list) this will always do the right thing. On the rare
occasion that there is more than one pid in the list this will sleep 1
second per zombie process which will allow that process, and any other
in the list a chance to exit.

While I'm here, local'ize the variables that this function uses.
2010-04-06 05:20:46 +00:00
Ed Maste
91192d55b0 Convert to 2-clause license, from NetBSD rc.subr r1.70.
Submitted by:	Alex Kozlov
Obtained from:	NetBSD
2010-01-26 13:23:31 +00:00
Ed Maste
2b084c6a0e Remove vestigial NetBSD compatibility shim. 2010-01-25 20:59:04 +00:00
Doug Barton
a4dd7f22af Update the comments about files ending in .sh
Prompted by:	Alex Kozlov <spam@rm-rf.kiev.ua>
2009-12-27 06:27:09 +00:00
Doug Barton
38b8fa9739 Delete some trailing whitespace 2009-12-27 06:25:03 +00:00
Jilles Tjoelker
bd3e243f9f rc.subr: Use pwait in wait_for_pids.
This waits for the requested process(es) to terminate, rather than polling
with an interval of 2 seconds.

If pwait is not available, the old method is used.

PR:		conf/132766
Reviewed by:	dougb
2009-12-21 22:16:07 +00:00
Ed Schouten
e79939add1 Fix qouting in a comment, to make it look more consistent
Submitted by:	Jille Timmermans <jille quis cx>
MFC after:	1 week
2009-10-18 19:51:06 +00:00
Doug Barton
0e22665fc7 Allow $name_program to override $command in a more robust way that
will not cause the value to be null if $command is not set.
2009-10-15 23:20:23 +00:00
Doug Barton
70d4ef1ea1 In regards to the "Starting foo:" type messages at boot time, create and
employ a more generic solution, and use it in the individual rc.d scripts
that also have an $rc_quiet test:

1. Add check_startmsgs() to rc.subr.
2. In the rc.d scripts that use rc_quiet (and rc.subr) substitute
variations of [ -z "$rc_quiet" ] with check_startmsgs
3. In savecore add a trailing '.' to the end of the message to make it
more consistent with other scripts.
4. In newsyslog remove a : before the terminal '.' since we do not expect
there to be anything printed out in between to make it more consistent.
5. In the following scripts change "quotes" to 'quotes' where no variables
exist in the message: savecore pf newsyslog
6. In the following scripts substitute if/then/fi for the simpler (and
more consistent) check_startmsgs &&: faith stf
7. In the following scripts separate the "Starting foo:" from the terminal
'.' to make them more consistent: moused hostname pf
8. In nfsclient move the message to its own line to avoid a style bug
9. In pf rc_quiet does not apply to the _stop method, so remove the
test there.
10. In motd add 'quotes' around the terminal '.' for consistency
2009-10-10 22:17:03 +00:00
Hiroki Sato
2880192bf2 Fix a case when both ${name}_program and ${command} are defined.
Spotted by:	Michio "Karl" Jinbo
2009-10-05 20:11:33 +00:00
Doug Barton
f414327c25 Add a knob to show 'Starting foo:' messages when faststart is used,
such as at boot time.
2009-09-17 19:05:47 +00:00
Hiroki Sato
b528b5502b Add an extension of set_rcvar(), a new function set_rcvar_obsolete(),
and $desc.

The set_rcvar_obsolete() is for displaying an obsolete variable
and the new one.  More specifically, a warning is displayed when
a variable is removed or changed in the source tree and the user
still defines the old one.

$router* and $ipv6_router* are replaced with $routed_* and
$route6d_* for consistency.  The old variables still work but
can be removed in the future.

MFC after:	3 days
2009-09-12 22:19:48 +00:00
Doug Barton
b004b4e45f Now that the last of the *.sh scripts are gone from the base,
emit a warning if come across one.
2009-05-30 21:41:54 +00:00
Andrew Thompson
02c7950097 Show which rc script is running since the default ^T just shows 'sh' as the
process.
2008-10-27 01:05:09 +00:00
Mike Makonnen
d7c5bf81cb Move the diagnostic output when the rc.subr(8) glue automatically starts a
service behind $rc_quiet. Instead, output a warning if the pre-command
routine or the command itself failed. Arguably, it's more useful to know when
a command failed to start than it is to have an endless list of
"Starting ...." lines[1].

[1] - This change actually helped me to discover a bug in rc.d/{lockd,statd}
      (fixed in r179941) that used to fail silently before.
2008-06-23 05:09:09 +00:00
Mike Makonnen
7d28174b91 Make quota knob conform to other rc(8) knobs. Keep older knob for
compatibility.

Requested by: Volker <volker@vwsoft.com>
2008-06-19 07:06:11 +00:00
Mike Makonnen
8717ddefb6 Move the check for enabled knobs further down in run_rc_command() so
that bogus commands cause usage information to be printed instead of
diagnostics about enabling the knob.
2008-06-19 06:11:34 +00:00
Maxim Konovalov
97752dfdc7 o Convert whitespaces to tabs. 2008-05-05 15:52:54 +00:00
Maxim Konovalov
2b30cf49b5 o Terminate "case" with "esac" not "fi".
Reported by:	Randy Bush
2008-05-05 15:50:20 +00:00
Mike Makonnen
432d4f0bce Fix improper use of checkyesno routine.
Noticed by: oliver
MFC after: 1 week
2008-05-05 07:43:48 +00:00
Mike Makonnen
a850398f3b Re-implement: do not silently fail when a command is not carried
out because the rc.conf(5) variable was not enabled. Display a
message that the command wasn't run and offer suggestions on
what the user can do.

Implement a quiet prefix, which will disable some diagnostics. The
fast prefix also implies quiet. During boot we use either fast or
quiet. For shutdown we already use 'faststop'. So, this informational
message should only appear during interactive use.

An additional benefit of having a quiet prefix is that we can start
putting some of our diagnostic messages behind this knob and start
"de-cluttering" the console during boot and shutdown.
2008-01-26 11:22:12 +00:00
Mike Makonnen
581487018d Backout previous commit. It's going to clutter the console
during boot and shutdown. I think I'll hide it behind autoboot or
maybe take brooks@ suggestion and implement a different command
prefix for booting/shutdown purposes, but in any case it needs more
thought and attention.

Noticed by: ceri
Pointyhat to: mtm
2008-01-25 16:44:34 +00:00
Mike Makonnen
0908cccf90 If the rc.conf(5) variable for a script is not enabled do not fail
silently. Display a message that the command wasn't run and make
possible suggestions for what to do.

PR:	   conf/118770
MFC after: 1 week
2008-01-25 15:06:26 +00:00
Doug Barton
416c130ca1 Remove pre-rc.d compatibility shims that were added before the 5.0 branch
for pre-5.0 variable names.

Remove two dhcp compatibility variables added after the 5.1-RELEASE.

Remove the now-unused support for these shims.

Approved by:	re (kensmith)
2007-10-09 07:20:44 +00:00
Yaroslav Tykhiy
039e8df3cf Be robust to a bogus script specification or contents
when figuring out what the real interpreter is for an
interpreted command.  That is, check whether we can read
the script file in the first place and, if so, make sure
we got a valid shebang line from it.
2007-06-04 11:39:35 +00:00
Mike Makonnen
3d03791bb4 o Implement the stop_boot subroutine [1]. This subroutine can be used by
scripts in rc.d to stop rc(8) from booting into multi-user mode when
  a critical or severe error condition is encountered.

o Modify scripts in etc/rc.d that already implemented this functionality
  independently.

o Document it.

[1] - This subroutine was implemented in FreeBSD in rc.d/fsck. I moved it
      to rc.subr(8). Our version differs slightly in that it takes an
      optional argument to stop the boot even if "autoboot" is not set.

Obtained from: NetBSD
MFC after: 2 weeks
2007-05-18 12:04:41 +00:00
Yaroslav Tykhiy
b5af060613 Prepend ${_chroot} to a pathname in a consistent and robust way:
insert a slash between ${_chroot} and the pathname if and only if
${_chroot} is set to a non-empty string.  Now the pathname is very
likely to be absolute, but we shouldn't take that for granted.
2007-03-10 13:37:44 +00:00
Yaroslav Tykhiy
c7be7e20f6 Allow for /usr/bin/env when parsing the shebang line from an
interpreted $command.  Some "portable" sofware packages use such a
line to skip the task of figuring out the absolute pathname of the
interpreter at install time, e.g.:

	#!/usr/bin/env python

It is insecure, but a popular book on Python seems to have advised
it to a wide audience.  Hence a number of such scripts in the ports,
mostly written in Python.

PR:		bin/100287
MFC after:	1 week
2006-12-31 11:07:29 +00:00