It isn't safe to keep unreferenced ifaddrs. Use in6ifa_ifwithaddr() to
determine ifaddr corresponding to destination address. Since currently
we keep addresses with embedded scope zone, in6ifa_ifwithaddr is called
with zero zoneid and marked with XXX.
Also remove route and lle lookups from ip6_input. Use in6ifa_ifwithaddr()
instead.
Sponsored by: Yandex LLC
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
Differential Revision: D1023
No objections from: net@
Relnotes: yes
Sponsored by: Yandex LLC
Some virtual if drivers has (ab)used ifa ifa_rtrequest hook to enforce
route MTU to be not bigger that interface MTU. While ifa_rtrequest hooking
might be an option in some situation, it is not feasible to do MTU checks
there: generic (or per-domain) routing code is perfectly capable of doing
this.
We currrently have 3 places where MTU is altered:
1) route addition.
In this case domain overrides radix _addroute callback (in[6]_addroute)
and all necessary checks/fixes are/can be done there.
2) route change (especially, GW change).
In this case, there are no explicit per-domain calls, but one can
override rte by setting ifa_rtrequest hook to domain handler
(inet6 does this).
3) ifconfig ifaceX mtu YYYY
In this case, we have no callbacks, but ip[6]_output performes runtime
checks and decreases rt_mtu if necessary.
Generally, the goals are to be able to handle all MTU changes in
control plane, not in runtime part, and properly deal with increased
interface MTU.
This commit changes the following:
* removes hooks setting MTU from drivers side
* adds proper per-doman MTU checks for case 1)
* adds generic MTU check for case 2)
* The latter is done by using new dom_ifmtu callback since
if_mtu denotes L3 interface MTU, e.g. maximum trasmitted _packet_ size.
However, IPv6 mtu might be different from if_mtu one (e.g. default 1280)
for some cases, so we need an abstract way to know maximum MTU size
for given interface and domain.
* moves rt_setmetrics() before MTU/ifa_rtrequest hooks since it copies
user-supplied data which must be checked.
* removes RT_LOCK_ASSERT() from other ifa_rtrequest hooks to be able to
use this functions on new non-inserted rte.
More changes will follow soon.
MFC after: 1 month
Sponsored by: Yandex LLC
According to IANA RPC uaddr registry, there are no AFs
except IPv4 and IPv6, so it's not worth being too abstract here.
Remove ne_rtable[AF_MAX+1] and use explicit per-AF radix tries.
Use own initialization without relying on domattach code.
While I admit that this was one of the rare places in kernel
networking code which really was capable of doing multi-AF
without any AF-depended code, it is not possible anymore to
rely on dom* code.
While here, change terrifying "Invalid radix node head, rn:" message,
to different non-understandable "netcred already exists for given addr/mask",
but less terrifying. Since we know that rn_addaddr() returns NULL if
the same record already exists, we should provide more friendly error.
MFC after: 1 month
When multicast capable interface goes away, it leaves multicast groups,
this leads to generate MLD reports, but MLD code does deffered send and
MLD reports are queued in the in6_multi's in6m_scq ifq. The problem is
that in6_multi structures are freed when interface leaves multicast groups
and thread that does deffered send will not take these queued packets.
PR: 194577
MFC after: 1 week
Sponsored by: Yandex LLC
o convert to if_transmit;
o use rmlock to protect access to gif_softc;
o use sx lock to protect from concurrent ioctls;
o remove a lot of unneeded and duplicated code;
o remove cached route support (it won't work with concurrent io);
o style fixes.
Reviewed by: melifaro
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
data in an mbuf, use M_WRITABLE() instead of a direct test of M_EXT;
the latter both unnecessarily exposes mbuf-allocator internals in the
protocol stack and is also insufficient to catch all cases of
non-writability.
(NB: m_pullup() does not actually guarantee that a writable mbuf is
returned, so further refinement of all of these code paths continues to
be required.)
Reviewed by: bz
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D900
These are needed for the forthcoming vxlan implementation. The context
pointer means we do not have to use a spare pointer field in the inpcb,
and the source address is required to populate vxlan's forwarding table.
While I highly doubt there is an out of tree consumer of the UDP
tunneling callback, this change may be a difficult to eventually MFC.
Phabricator: https://reviews.freebsd.org/D383
Reviewed by: gnn
usage of a function computing the checksum only over a part of the function.
Therefore introduce in6_cksum_partial() and implement in6_cksum() based
on that.
While there, ensure that the UDPLite packet contains at least enough bytes
to contain the header.
Reviewed by: kevlo
MFC after: 3 days
that this means full checksum coverage for received packets.
If an application is willing to accept packets with partial
coverage, it is expected to use the socekt option and provice
the minimum coverage it accepts.
Reviewed by: kevlo
MFC after: 3 days
ifa_ifwithdstaddr. For the sake of backwards compatibility, the new
arguments were added to new functions named ifa_ifwithnet_fib and
ifa_ifwithdstaddr_fib, while the old functions became wrappers around the
new ones that passed RT_ALL_FIBS for the fib argument. However, the
backwards compatibility is not desired for FreeBSD 11, because there are
numerous other incompatible changes to the ifnet(9) API. We therefore
decided to remove it from head but leave it in place for stable/9 and
stable/10. In addition, this commit adds the fib argument to
ifa_ifwithbroadaddr for consistency's sake.
sys/sys/param.h
Increment __FreeBSD_version
sys/net/if.c
sys/net/if_var.h
sys/net/route.c
Add fibnum argument to ifa_ifwithbroadaddr, and remove the _fib
versions of ifa_ifwithdstaddr, ifa_ifwithnet, and ifa_ifwithroute.
sys/net/route.c
sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_options.c
sys/netinet/ip_output.c
sys/netinet6/nd6.c
Fixup calls of modified functions.
share/man/man9/ifnet.9
Document changed API.
CR: https://reviews.freebsd.org/D458
MFC after: Never
Sponsored by: Spectra Logic
Add in6ifa_ifwithaddr() function. It is similar to ifa_ifwithaddr,
but does fast lookup in the hash of inet6 addresses.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
* new macro to remove magic number - IPV6_ADDR_SCOPES_COUNT;
* sa6_checkzone() - this function checks sockaddr_in6 structure
for correctness of sin6_scope_id. It also can fill correct
value sometimes.
* in6_getscopezone() - this function returns scope zone id for
specified interface and scope.
* in6_getlinkifnet() - this function returns struct ifnet for
corresponding zone id of link-local scope.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
* use IN6_IS_ADDR_XXX() macro instead of hardcoded values;
* for multicast addresses just return scope value, the only exception
is addresses with 0x0F scope value (RFC 4291 p2.7.0);
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
* Return ENETDOWN when interface specified by ipi6_ifindex is not
enabled for IPv6 use.
* Return EADDRNOTAVAIL when ipi6_ifindex specifies an interface, but the
address ipi6_addr is not available for use on that interface.
* Return EINVAL when ipi6_addr is multicast address.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
It affects the IPv6 source address selection algorithm (RFC 6724)
and allows override the last rule ("longest matching prefix") for
choosing among equivalent addresses. The address with `prefer_source'
will be preferred source address.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
This doesn't include the same kind of userland overriding that the IPv4
path has; nor does it yet know about 2-tuple versus 4-tuple hashing.
That'll come later.
Differential Revision: https://reviews.freebsd.org/D527
Reviewed by: grehan
eliminiates some warnings when building in userland.
Thanks to Patrick Laimbock for reporting this issue.
Remove also some unnecessary casts.
There should be no functional change.
MFC after: 1 week
handling ioctls. While here, remove duplicated checks for a NULL ifp in
in6_control(): this check is already done near the beginning of the
function.
PR: 189117
Reviewed by: hrs
MFC after: 2 weeks
PF_LINK, and multicast/broadcast flag should always be dropped because
the outer protocol uses unicast even when the inner address is not for
unicast. It had been broken since r236951 when gif_output() started to
use IFQ_HANDOFF().
