Almost never needed in real life because %s is tends to be
only one format spec.
1) Return code of gmtime_r() is checked.
2) All flags are set.
Submitted by: ache
MFC after: 3 weeks
Add new functions to manipulate these mode & state, instead of calling
kbdd_ioctl() everyhere.
This fixes at least two bugs:
1. The state of the Scroll Lock LED and the state of scroll mode
could be out-of-sync. For instance, if one enables scroll mode on
window #1 and switches to window #2, the LED would remain on, but
the window wouldn't be in scroll mode.
Similarily, when switching between a console and an X.Org
session, the LED states could be inconsistent with the real
state.
2. When exiting from an X.Org session, the user could be unable to
type anything. The workaround was to switch to another console
window and come back.
Differential Revision: https://reviews.freebsd.org/D821
Reviewed by: ray@
Approved by: ray@
Tested by: kwm@
MFC after: 3 days
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:
r272234:
Initial commit to include virtual machine images as part
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
r272236:
Use VMBASE in place of a hard-coded filename in the CLEANFILES
list.
r272262:
Remove a 'set -x' that snuck in during testing.
r272264:
release/Makefile:
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
r272269:
release/Makefile:
Include .OBJDIR in DESTDIR in the vm-base target.
release/release.sh:
Provide the full path to mddev.
r272271:
Fix UFS label for the root filesystem.
r272272:
Remove comments left in accidentally while testing, so the
VM /etc/fstab is actually created.
r272277:
Remove the UFS label from the root filesystem since it is added
by mkimg(1) as a gpt label, consistent with the fstab(5) entry.
r272279:
Comment cleanup in panic() message when mkimg(1) does not support
the requested disk image format.
r272376:
Separate release/scripts/mk-vmimage.sh to machine-specific
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
r272380:
Avoid using env(1) to set values passed to mk-vmimage.sh,
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
r272381:
After evaluating WITH_VMIMAGES is non-empty, ensure
the mk-vmimage.sh script exists before running it.
r272392:
Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
r272412:
Document the new 'vm-image' target, and associated release.conf
variables.
r272413:
Remove two stray comments added during the initial iterations
of testing, no longer needed.
MFC after: 5 days
X-MFC-10.1: yes
Tested on: r272269, r272272, r272279, r272380, r272392
Sponsored by: The FreeBSD Foundation
SPC-2 tells REPORT LUNS shall be supported by devices supporting LUNs other
then LUN 0. If we see LUN 0 disconnected, guess there may be others, and
so REPORT LUNS shall be supported.
MFC after: 1 month
usage of a function computing the checksum only over a part of the function.
Therefore introduce in6_cksum_partial() and implement in6_cksum() based
on that.
While there, ensure that the UDPLite packet contains at least enough bytes
to contain the header.
Reviewed by: kevlo
MFC after: 3 days
Previous logic was not differentiating disconnected LUNs and absent targets.
That made it to stop scan if LUN 0 was not found for any reason. That made
problematic, for example, using iSCSI targets declaring SPC-2 compliance and
having no LUN 0 configured.
The new logic continues sequential LUN scan if:
-- we have more configured LUNs that need recheck;
-- this LUN is connected and its SCSI version allows more LUNs;
-- this LUN is disconnected, its SCSI version allows more LUNs and we
guess they may be connected (we haven't scanned first 8 LUNs yet or
kern.cam.cam_srch_hi sysctl is set to scan more).
Reported by: trasz
MFC after: 1 month
the PAT MSR on guest exit/entry. This workaround was done for a beta release
of VMware Fusion 5 but is no longer needed in later versions.
All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT
in the VM exit and entry controls.
Discussed with: grehan
Instead requeue mbuf back to IPv4 protocol handler. If there is one extra IP-IP
encapsulation, it will be handled with tunneling interface. And thus proper
interface will be exposed into mbuf's rcvif. Also, tcpdump that listens on tunneling
interface will see packets in both directions.
Sponsored by: Yandex LLC
It defines a variable and its default value in load_rc_config() just after
rc.conf is loaded. "rcvar" command shows the current and the default values.
This is an attempt to solve a problem that rc.d scripts from third-party
software do not have entries in /etc/defaults/rc.conf. The fact that
load_rc_config() reads rc.conf only once and /etc/rc invokes the function
before running rc.d scripts made developers confused for a long time because
load_rc_config() just before run_rc_command() in each rc.d script overrides
variables only when the script is directly invoked, not from /etc/rc.
Variables defined in set_rcvar are always set in load_rc_config() after
loading rc.conf. An rc.d script can now be written in a self-contained
manner regarding the related variables as follows:
---
name=foo
rcvar=foo_enable
set_rcvar foo_enable YES "Enable $name"
set_rcvar foo_flags "-s" "Flags to $name"
...
load_rc_config $name
run_rc_command "$@"
---
if_lagg(4) interfaces which were cloned in a vnet jail.
Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".
CR: D842
This is temporary commit to be merged to 10.
Other approach (like hash table) should be used
to store different masks.
PR: 194078
Submitted by: Rumen Telbizov
MFC after: 3 days
that keeps track of a particular region of the image. In particular the
image_data() function needs to return to the caller whether a region
contains data or is all zeroes. This required reading the region from
the temporary file and comparing the bytes. When image_data() is used
multiple times for the same region, this will get painful fast.
With a chunk describing a region of the image, we now also have a way
to refer to the image provided on the command line. This means we don't
need to copy the image into a temporary file. We just keep track of the
file descriptor and offset within the source file on a per-chunk basis.
For streams (pipes, sockets, fifos, etc) we now use the temporary file
as a swap file. We read from the input file and create a chunk of type
"zeroes" for each sequence of zeroes that's a multiple of the sector
size. Otherwise, we allocte from the swap file, mmap(2) it, read into
the mmap(2)'d memory and create a chunk representing data.
For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files
eficiently and create a chunk of type zeroes for holes and a chunk of
type data for data regions. For data regions, we still compare the bytes
we read to handle differences between a file system's block size and our
sector size.
After reading all files, image_write() is used by schemes to scribble in
the reserved sectors. Since this never amounts to much, keep this data
in memory in chunks of exactly 1 sector.
The output image is created by looking using the chunk list to find the
data and write it out to the output file. For chunks of type "zeroes"
we prefer to seek, but fall back to writing zeroes to handle pipes.
For chunks of type "file" and "memoty" we simply write.
The net effect of this is that for reasonably large images the execution
time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about
5 to 8 times, depending on partition sizes, output format whether in
input files are sparse or not.
Bump version to 20141001.
This has the side effect of ensuring that realpath is also run for the
nominal case of PORTSDIR=/usr/ports (assuming .CURDIR is a ports directory
that relies on /usr/ports but is not rooted in it). This ensures that any
generated PORTSDIR used is always the actual location.
Submitted by: jkim (different implementation)
while here:
+ Fix an issue when extracting small archives where dialog_mixedgauge was
not rendering; leaving the user wondering if anything happened.
+ Add #ifdef's to assuage compilation against older libarchive
NB: Minimize diff between branches; make merging easier.
+ Add missing calls to end_dialog(3)
+ Change string processing from strtok(3) to strcspn(3) (O(1) optimization)
+ Use EXIT_SUCCESS and EXIT_FAILURE instead of 0/1
+ Optimize getenv(3) use, using stored results instead of calling repeatedly
NB: Fixes copy/paste error wherein we display getenv(BSDINSTALL_DISTDIR) in
an error msgbox when chdir(2) to getenv(BSDINSTALL_CHROOT) fails
(wrong variable displayed in msgbox).
+ Use strtol(3) instead of [deprecated] atoi(3)
+ Add additional error checking (e.g., check return of archive_read_new(3))
+ Assign DECONST strings to static variables
+ Fix typo in distextract.c error message (s/Could could/Could not/)
+ Add comments and make a minor whitespace adjustment
Reviewed by: nwhitehorn, julian
Use standard mdoc macros instead of pure roff, fix some other mdoc usage,
make the style consistent, and fix some grammar issues.
Approved by: hrs (mentor)
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
Sponsored by: The FreeBSD Foundation
Some watchdog drivers (like ipmi) need to sleep while patting the watchdog.
See sys/dev/ipmi/ipmi.c:ipmi_wd_event(), which calls malloc(M_WAITOK).
Submitted by: asomers
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 637548 on 2012/10/04
