Commit Graph

69 Commits

Author SHA1 Message Date
Eitan Adler
dae3a64fb9 userland: Fix several typos and minor errors
- duplicate words
- typos
- references to old versions of FreeBSD

Reviewed by:	imp, benno
2017-12-27 03:23:01 +00:00
Andriy Voskoboinyk
99a1c8894a Regenerate etc/devd/usb.conf
Reminded by:		hselasky
2017-10-31 23:33:24 +00:00
Kristof Provost
96842052d3 Regenerate usb.conf 2017-10-13 20:29:35 +00:00
Andriy Gapon
31f976bc4a fix the misleading log facility used in devd/zfs.conf
In general, the "kern" facility is reserved for the kernel use only.
If a program specifies that facility, then it is silently converted
to "user" facility.
So, using logger -p kern.xxx was both misleading and non-specific.

Thus, change the facility to local7, so that users can create
more adequate syslogd configurations.

While local0..local7 are documented as being for local use we already
have several examples in the tree where they are used because none of
the named facilities really fits.

Approved by:	asomers
MFC after:	2 weeks
Differential Revision: https://reviews.freebsd.org/D12420
2017-10-05 12:38:26 +00:00
Hans Petter Selasky
05a3427964 Regenerate usb.conf .
MFC after:	1 week
2017-09-20 15:00:00 +00:00
Sepherosa Ziehau
c685956956 hyperv: Add VF bringup scripts and devd rules.
How network VF works with hn(4) on Hyper-V in non-transparent mode:

- Each network VF has a cooresponding hn(4).
- The network VF and the it's cooresponding hn(4) have the same hardware
  address.
- Once the network VF is up, e.g. ifconfig VF up:
  o  All of the transmission should go through the network VF.
  o  Most of the reception goes through the network VF.
  o  Small amount of reception may go through the cooresponding hn(4).
     This reception will happen, even if the the cooresponding hn(4) is
     down.  The cooresponding hn(4) will change the reception interface
     to the network VF, so that network layer and application layer will
     be tricked into thinking that these packets were received by the
     network VF.
  o  The cooresponding hn(4) pretends the physical link is down.
- Once the network VF is down or detached:
  o  All of the transmission should go through the cooresponding hn(4).
  o  All of the reception goes through the cooresponding hn(4).
  o  The cooresponding hn(4) fallbacks to the original physical link
     detection logic.

All these features are mainly used to help live migration, during which
the network VF will be detached, while the network communication to the
VM must not be cut off.  In order to reach this level of live migration
transparency, we use failover mode lagg(4) with the network VF and the
cooresponding hn(4) attached to it.

To ease user configuration for both network VF and non-network VF, the
lagg(4) will be created by the following rules, and the configuration
of the cooresponding hn(4) will be applied to the lagg(4) automatically.

Sponsored by:	Microsoft
Differential Revision:	https://reviews.freebsd.org/D11635
2017-07-31 07:18:15 +00:00
Kevin Lo
a6bac5b604 Sort REALTEK section and remove duplicate entry for RTL8192CU. 2017-01-24 03:00:22 +00:00
Kevin Lo
60b9567d16 Add support for the Realtek RTL8192EU chipset.
Committed over the D-Link DWA-131 rev E1 on amd64 with WPA.

Reviewed by:	avos
2017-01-24 02:35:38 +00:00
Sepherosa Ziehau
168fce73b5 hyperv/vss: Add driver and tools for VSS
VSS stands for "Volume Shadow Copy Service".  Unlike virtual machine
snapshot, it only takes snapshot for the virtual disks, so both
filesystem and applications have to aware of it, and cooperate the
whole VSS process.

This driver exposes two device files to the userland:

    /dev/hv_fsvss_dev

    Normally userland programs should _not_ mess with this device file.
    It is currently used by the hv_vss_daemon(8), which freezes and
    thaws the filesystem.  NOTE: currently only UFS is supported, if
    the system mounts _any_ other filesystems, the hv_vss_daemon(8)
    will veto the VSS process.

    If hv_vss_daemon(8) was disabled, then this device file must be
    opened, and proper ioctls must be issued to keep the VSS working.

    /dev/hv_appvss_dev

    Userland application can opened this device file to receive the
    VSS freeze notification, hold the VSS for a while (mainly to flush
    application data to filesystem), release the VSS process, and
    receive the VSS thaw notification i.e. applications can run again.

    The VSS will still work, even if this device file is not opened.
    However, only filesystem consistency is promised, if this device
    file is not opened or is not operated properly.

hv_vss_daemon(8) is started by devd(8) by default.  It can be disabled
by editting /etc/devd/hyperv.conf.

Submitted by:	Hongjiang Zhang <honzhan microsoft com>
Reviewed by:	kib, mckusick
MFC after:	3 weeks
Sponsored by:	Microsoft
Differential Revision:	https://reviews.freebsd.org/D8224
2016-11-15 02:36:12 +00:00
Kevin Lo
a24d62b533 Add preliminary support for the RTL8153.
Reviewed by:	hselasky
2016-10-31 05:58:11 +00:00
Andriy Voskoboinyk
7453645f2a rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
 * for RTL8821AU: 2 VAPs at the same time;
 * other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
 * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
 * common (if_rtwn*)
 * chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn  rtwnfw  -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by:	kevlo, garga,
		Peter Garshtja <peter.garshtja@ambient-md.com>,
		Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
		Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
		<otacilio.neto@bsd.com.br>
Relnotes:	yes
2016-10-17 20:38:24 +00:00
Hans Petter Selasky
d308a222e9 Regenerate usb.conf .
MFC after:	1 week
2016-04-29 12:00:36 +00:00
Glen Barber
b40fde96d2 Fix etcupdate(8) with rc.sendmail and devd/*. It turns out
BIN1 and such in etc/* cannot use FILESGROUPS.

Reported by:	peter
Sponsored by:	The FreeBSD Foundation
2016-04-17 03:45:45 +00:00
Glen Barber
b626f5a73a MFH r289384-r293170
Sponsored by:	The FreeBSD Foundation
2016-01-04 19:19:48 +00:00
Hans Petter Selasky
7770ce47bb Regenerate usb.conf .
MFC after:	1 week
2015-12-03 16:54:45 +00:00
Baptiste Daroussin
f94594b37a Finish merging from head, messed up in previous attempt 2015-09-12 12:03:02 +00:00
Marius Strobl
891c57d8a9 - Fix compilation after r285909 with USB_DEBUG defined.
- Regenerate usb.conf.
2015-07-27 14:43:14 +00:00
Baptiste Daroussin
2fbd60ec47 Merge from head @274131 2015-06-20 00:58:46 +00:00
Hans Petter Selasky
266c631ac0 Regenerate usb.conf .
MFC after:	1 week
2015-06-19 09:37:37 +00:00
Baptiste Daroussin
0ed8966e5b Make acpi an individual package
Flag /etc/devd/asus.conf as a config file so it will be automatically merged on updates
2015-03-05 16:22:31 +00:00
Enji Cooper
4a0ea4d698 Honor MK_ACPI in etc/devd and etc/rc.d
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
2015-01-26 08:04:38 +00:00
Hans Petter Selasky
50a601af50 Regenerate usb.conf .
MFC after:	1 week
2014-12-15 09:35:46 +00:00
Justin Hibbits
c2384debfc Missed a terminating ';'.
X-MFC-with:	r273009
2014-11-18 16:31:00 +00:00
Warner Losh
f8080a9986 HYPERV isn't available on all architectures, but just on by default
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
2014-10-16 00:33:06 +00:00
Justin Hibbits
d49c6f029c Add an AC line monitor so power_profile can work
Summary:
Add a polling loop (1Hz) to monitor the battery and AC status, to notify devd
like ACPI does for power monitoring.  This allows /etc/rc.d/power_profile to
work on PowerPC laptops

Test Plan:
Tested on a Titanium PowerBook, configuring economy_cpu_freq and
performance_cpu_freq, disabling powerd.

Reviewers: #powerpc, nwhitehorn

Reviewed By: nwhitehorn

Subscribers: rpaulo

Differential Revision: https://reviews.freebsd.org/D937
2014-10-12 19:12:48 +00:00
Hans Petter Selasky
62f9ed9540 Add example devd configuration file for USB printers. 2014-10-09 13:58:19 +00:00
Hans Petter Selasky
371b7a54c3 Regenerate usb.conf
MFC after:	3 days
2014-09-28 12:41:48 +00:00
Hiroki Sato
02032ae5a2 Fix cdev. It is a device node name, not a pathname. 2014-09-19 07:18:45 +00:00
Xin LI
76cd7220b5 Use a devd event to start hv_kvpd instead of doing so in rc.d script.
This is cleaner and eliminates the unneeded startup of KVP daemon on
systems that do not run as a Hyper-V guest.

Submitted by:	hrs
X-MFC-with:	271493, 271688, 271699
2014-09-17 02:32:22 +00:00
Enji Cooper
aecd25eea9 Make the USB and ZFS devd configuration files optional depending on the
values of MK_USB/MK_ZFS

Making zfs.conf optional resolves PR # 186971

PR: 186971
Phabric: D606
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
2014-08-15 21:35:31 +00:00
Andriy Gapon
06e79198cb move devd rules for zfs events into a separate file and fix stale event types
Also, extend with some new events.
Additionally, tag syslog messages with 'ZFS' instead of using explicit "ZFS: "
prefix in the messages themselves.

Tested by:	Daniel O'Connor <doconnor@gsoft.com.au>
MFC after:	8 days
Sponsored by:	HybridCluster
2014-02-14 15:31:48 +00:00
Hans Petter Selasky
c79a4afc20 Regenerate usb.conf
MFC after:	2 weeks
2014-02-06 10:52:51 +00:00
Hans Petter Selasky
0da629d403 Regenerate usb.conf
MFC after:	2 days
2014-02-04 09:11:50 +00:00
Kevin Lo
2f95141e5f Regen. 2014-01-03 06:02:08 +00:00
Kevin Lo
bd106e837e Regen. 2013-12-27 08:06:23 +00:00
Kevin Lo
8c1afc15c5 Regen. 2013-12-06 15:27:42 +00:00
Don Lewis
a2c0f474c4 Regenerate after r258363 (alternate ID for Novatel MiFi 2200) and
r258333 (bus_autoconf.sh tweak).
2013-11-20 02:20:27 +00:00
Mark Johnston
39be692974 Regenerate usb.conf after r258331. 2013-11-19 00:40:38 +00:00
Ian Lepore
e02916a48a Regenerate after recent addition of FTDI and bluetooth device IDs. 2013-09-01 14:28:12 +00:00
Rui Paulo
c02f0567ce Regen for if_rsu. 2013-08-04 19:36:46 +00:00
Hans Petter Selasky
7dda4bda6b Regenerate usb.conf
MFC after:	1 week
2013-07-26 10:25:18 +00:00
Kevin Lo
277a625085 Regenerate usb.conf after r252196.
Spotted by:	rpaulo
2013-06-25 07:17:30 +00:00
Rui Paulo
f3259b1bd2 Regen. 2013-06-10 05:45:53 +00:00
Hans Petter Selasky
f93344388e Regenerate usb.conf
MFC after:	1 week
2013-04-06 17:25:17 +00:00
Hans Petter Selasky
0d8a95f1b8 Regenerate usb.conf
MFC after:	1 week
2012-12-15 10:56:16 +00:00
Hans Petter Selasky
6f786dc92b Regenerate usb.conf
MFC after:	1 week
2012-11-28 18:37:20 +00:00
Hans Petter Selasky
f36911a33c Regenerate usb.conf
MFC after:	1 week
2012-10-01 06:48:59 +00:00
Hans Petter Selasky
f167692215 Regenerate usb.conf
MFC after:	2 weeks
2012-08-05 11:53:16 +00:00
Hans Petter Selasky
9d569918e6 Regenerate usb.conf
MFC after:	3 days
2012-05-21 15:01:35 +00:00
Hans Petter Selasky
d2c5981310 Regenerate usb.conf to use new -n option when doing kldload.
MFC after:	1 week
2012-03-18 09:52:54 +00:00