Commit Graph

21 Commits

Author SHA1 Message Date
Warner Losh
462fcd56a6 Older versions of the intersil firmware is a lot slower than newer
versions of the firmware.  It responds more slowly to commands, and we
bogusly failed them.  We assume that all versions of the intersil
firmware before 1.0 are 10 times slower and will give it 10x the time
to finish.

# for 5.2 we should always just assume 5s.
2003-12-09 07:41:07 +00:00
Sam Leffler
8df91fc8bc o add experimental radiotap capture format
o add netbsd logic to convert rssi to device-independent values

Obtained from:	NetBSD (rssi conversion code)
2003-09-05 22:29:30 +00:00
Sam Leffler
45bbf62fb5 track changes to 802.11 code:
o override new_state method per new model
o use ieee80211_state_name instead of private copy
2003-07-20 21:38:20 +00:00
Sam Leffler
2c71d3c795 update for new 802.11 support 2003-06-28 06:17:26 +00:00
Warner Losh
0e630ee24b o Lucent cards don't seem to like multiple buffers for tx. Use only
one tx buffer for these cards.  The old driver only used one.  We use
  1 for symbol, and 3 for prism cards.
o Don't do the maximum loops thing in the ISR.  In fact, revert to the
  old interrupt handler.  Lucent cards don't seem to work too well if
  you don't disable/enable interrupts from the card in the ISR.

Between these two changes, Lucent cards suck less.  They work in
autoselect mode only.  And seem to get 1Mbps or 2Mbps only.  Setting a
specific media speed doesn't work, and I've had a few issues even with
these patches.  They turn a former brick into a nearly useful card.

These patches work on the prism 2 and 2.5 PC Card cards that I have.
I've not tested this on PCI cards.  I suspect, but couldn't find
proof, that they were the reason that the ISR was changed so radically
from its FreeBSD roots in NetBSD.  We might need to have a variant ISR
if so.
2003-03-18 04:22:42 +00:00
Warner Losh
572ab50c54 Move symbol reset detection code back into wi_reset. This is a more
reliable way to detect if the symbol cards have been reset or not.
This makes symbol cards work better.

Submitted by: deischen
2003-03-18 02:54:39 +00:00
Sam Leffler
474b12ddf0 new wi driver that uses the 802.11 link layer code
Reviewed by:	imp
Obtained from:	NetBSD (originally)
2003-01-15 20:11:31 +00:00
Matthew N. Dodd
c94b6ebc27 Suspend/resume support (mostly for MiniPCI Prism2.5 boards).
Reviewed by:	 imp
2003-01-14 23:19:32 +00:00
Warner Losh
7f2907fd70 Limit the TX key to a valid range
PR: 39960, 39961 (patches here pointed out problem, but didn't quite fix it)
2002-09-29 18:40:35 +00:00
Warner Losh
6f6efa5165 Move the symbol firmware loading routines into if_wi.
Define some basic firmware downloading commands.
2002-08-15 07:13:17 +00:00
Warner Losh
ffd283ae15 Send a disassoc packet for a STA that we don't know about that claims to
be associated with us.  From millert@openbsd.org

Obtained from: OpenBSD (I think)
2002-07-26 22:56:04 +00:00
Warner Losh
f83c4a42ea IF_HANDOFF is no longer in -stable 2002-06-30 22:39:25 +00:00
Warner Losh
d5ca4da61e Add better mediaopt support for ibss and friends.
Now the driver is closer to matching the wi man page.

Submitted by: jhay (who obtained it from OpenBSD).
2002-06-19 17:37:34 +00:00
Warner Losh
3465a702f3 Make this driver compile for -stable also to prep for MFC 2002-04-26 23:11:23 +00:00
Warner Losh
c8e6c42caa Minor format nit 2002-04-16 07:39:25 +00:00
Warner Losh
b0152b2e40 unifdef -DWI_HOSTAP, like OpenBSD does 2002-04-12 06:01:28 +00:00
Warner Losh
e122b676e6 Replace the original host WEP implementation with the one in OpenBSD
(apparently by markus@, at least committed by him).  This has the
advantage of not using the bad IV's from Fluhrer/Mantin/Shamir as well
as bringing the drivers a little closer together.

Also use a few constants in place of magic numbers in one place.

Obtained from: OpenBSD 1.25, 1.28, 1.36, 1.38, 1.42
2002-04-12 03:42:37 +00:00
Warner Losh
1bd2b5b4cd Integrate the hostap stuff that Thomas Skibo <skibo@packbell.net>
wrote.  This code was for 4.5-release, so I've ported it to -current
and made a few minor tweaks.  The biggest non-style tweak was to not
make access point the default.

More changes will be needed to get this actually working, but I wanted
to get a relatively pure baseline.  This doesn't seem to break what
works now.
2002-04-11 07:21:16 +00:00
Warner Losh
dfdbc0533d MFNetBSD:
wi.c 1.64: Table driven IDs (ichiro)
	1.59: Don't use magic numbers (ichiro)
Also, added Sony, Lucent Embedded Ids and fix minor bugs for lucent
cards (and submit those changes back to ichiro-san)

Obtained from: NetBSD
2002-04-04 21:40:37 +00:00
Warner Losh
a19c104dd2 Four fixes from NetBSD:
1) Properly detect the Symbol based cards (The 3Com Airconnect and their
   ilk) and only reset them *ONCE* ever.  This appears to make them work,
   but more testing is needed.  The tests that would wedge up my machine
   completely now appear to work, but I have not real access points
   handy.
2) Report both the Station firmware and the Primary firmware on Prism
   based cards.  On Lucent based cards, only report the station firmware
   since that's all it supports.  On symbol cards, report the symbol
   specific firmware name as its station firmware.
3) Better Prism 2.5 and 3 family names.  We really need to go table
   driven for this.
4) Workaround for bugs in Intersil's firmware is only needed for at most
   0.8.2 and earlier, since 0.8.3 and later appear to work.

Obtained from: NetBSD
2002-04-03 19:44:17 +00:00
Warner Losh
dbab04ca39 First cut at breaking out the bus attachment from the bus independent
part of the driver.  Also, move the softc and some other stuff to
if_wivar.h from if_wireg.h to make future merging activities easier.
2002-04-02 02:38:35 +00:00